Answer:
a) Pelton Turbine
b) [tex]P=2.42*10^{5}KW[/tex]
Explanation:
From the question we are told that:
Height [tex]h=50[/tex]
Flow Rate [tex]R= 500 m^3/s[/tex]
Rotational speed [tex]\omega=\90 RPM[/tex]
Let
Density of water
[tex]\rho=1000[/tex]
Generally the equation for momentum is mathematically given by
[tex]P=\rho gRh[/tex]
[tex]P=1000*9.81*500*50[/tex]
[tex]P=2.42*10^{5}KW[/tex]
Please send the solution quickly
Answer:
answer 2
Explanation:
Assuming you determine the required section modulus of a wide flange beam is 200 in3, determine the lightest beam possible that will satisfy this condition.
Answer:
W18 * 106
Explanation:
Given that the section modulus of the wide flange beam is 200 in^3 the lightest beam possible that can satisfy the section modulus must have a section modulus ≥ 200 in^3. also the value of the section modulus must be approximately closest to 200in^3
From wide flange Beam table ( showing the section modulus )
The beam that can satisfy the condition is W18 × 106 because its section modulus ( s ) = 204 in^3
dentify the recommended practices when putting a tip on a micropipette. Select one or more: Gently push the micropipette into the tip and tap lightly to load the tip. Hold the micropipette at a 45 degree angle to the tip rack. Use the tip size designed for the micropipette size in use. Remove the tip from the rack and place it on micropipette by hand.
Answer:
Gently push the micropipette into the tip box and tag tightly to load the tip.
Explanation:
The recommended practice when putting a tip on a micropipette is ; Gently push the micropipette into the tip box and tag tightly to load the tip.
Given that it is not advisable to remove tip from rack so as not to contaminate it, if we want to put a tip on a micropipette we should gently push the micropipette into the tip box.
The term variation describes the degree to which an object or idea differs from others of the same type or from a standard.
a. True
b. False