Answer:
1. (NH₄)₂S(s) -----> NH₄+(aq) + S²-(aq)
2. Al³+ (aq) + PO₄³+ (aq) ----> AlPO₄ (s)
Explanation:
The dissociation of ammonium sulphide, (NH₄)₂S when dissolved in water is given in the equation below:
(NH₄)₂S(s) -----> NH₄+(aq) + S²-(aq)
However very little S²- ions are present in solution due to the very basic nature of the S²- ion (Kb = 1 x 105).
The ammonium ion being a better proton donor than water, donates a proton to sulphide ion to form hydrosulphide ion which exists in equilibrium with aqueous ammonia.
S²- (aq) + NH₄+ (aq) ⇌ SH- (aq) + NH₃ (aq)
Aqueous solutions of ammonium sulfide are smelly due to the release of hydrogen sulfide and ammonia, hence, their use in making stink bombs.
2. The reaction between aluminium nitrate and sodium phosphatein aqueous solution is a double decomposition reaction whish results in the precipitation of insoluble aluminium phosphate. The equation of the reaction is given below :
Al(NO₃)₃ (aq) + Na₃PO₄ (aq) ----> AlPO₄ (s) + 3 NaNO₃ (aq)
The net ionic equation is given below:
Al³+ (aq) + PO₄³+ (aq) ----> AlPO₄ (s)
Complete and balance the following half-reaction in acidic solution Sn2 (aq) Sn"(aq) 4+ Sn OH H20
Sn₂+ + H₂O₂ + 2H+ ==> Sn₄ + + 2H₂O is balanced redοx reactiοn.
Define redοx reactiοnsOrganic mοlecules undergο redοx prοcesses knοwn as οrganic reductiοns, οrganic οxidatiοns, οr οrganic redοx reactiοns. Because many prοcesses gο by the label οf redοx but dοn't actually invοlve an electrοn transfer, οxidatiοns and reductiοns in οrganic chemistry differ frοm regular redοx reactiοns.
Redοx reactiοns are defined as chemical prοcesses in which οne οr mοre οf the chemical species invοlved undergοes changes in οxidatiοn number. Oxidatiοn and reductiοn οccur simultaneοusly in this kind οf chemical reactiοn. Electrοns are lοst οr gained during οxidatiοn and reductiοn, respectively.
Sn₂ + ==> Sn₄ + + 2e- is οxidatiοn half
H₂O₂ ==> H₂Ois reductiοn half
Sn₂ + ==> Sn₄ + + 2e-
H₂O₂ ==> H₂O+ H₂O
H₂O₂ + 2H+ ==> H₂O+ H₂O
H₂O₂ + 2H+ + 2e-==> H₂O+ H₂O
Sn₂ + ==> Sn₄ + + 2e-
H₂O₂ + 2H+ + 2e-==> H₂O+ H₂O
Sn₂ + + H₂O₂ + 2H+ + 2e- ==> Sn₄ + + 2e- + H₂O+ H₂O
Sn₂ + + H₂O₂ + 2H+ ==> Sn₄ + + 2H₂O balanced redοx equatiοn
To learn more about redox reactions :
https://brainly.com/question/21851295
#SPJ4
calculate the energy change (ΔE) for the decomposition of hydrogen peroxide,
2 H2O2(g) → 2 H2O(g) + O2(g)
given the bond energies of the reactants and products.
Bond Bond Energy(kJ/mol)
H-H 436
O-H 463
O-O 146
O=O 498
The energy change (ΔE) for the decomposition of hydrogen peroxide is -628 kJ/mol, indicating an exothermic reaction.
To calculate the energy change (ΔE) for the decomposition of hydrogen peroxide, we need to determine the total bond energies of the reactants and products and then calculate the difference between the two.
Reactants:
2 [tex]H_{2} O_{2}[/tex](g)
Products:
2 [tex]H_{2} O[/tex](g)
[tex]O_{2}[/tex](g)
First, let's calculate the bond energy for the reactants:
H-H bonds:
2 H-H bonds in[tex]H_{2} O_{2}[/tex] = 2 * 436 kJ/mol = 872 kJ/mol
O-H bonds:
4 O-H bonds in[tex]H_{2} O_{2}[/tex] = 4 * 463 kJ/mol = 1852 kJ/mol
O-O bonds:
1 O-O bond in [tex]H_{2} O_{2}[/tex] = 1 * 146 kJ/mol = 146 kJ/mol
Total bond energy of the reactants:
872 kJ/mol (H-H) + 1852 kJ/mol (O-H) + 146 kJ/mol (O-O) = 2870 kJ/mol
Next, let's calculate the bond energy for the products:
H-H bonds:
4 H-H bonds in [tex]H_{2} O[/tex]= 4 * 436 kJ/mol = 1744 kJ/mol
O=O bonds:
1 O=O bond in [tex]O_{2}[/tex]= 1 * 498 kJ/mol = 498 kJ/mol
Total bond energy of the products:
1744 kJ/mol (H-H) + 498 kJ/mol (O=O) = 2242 kJ/mol
Finally, calculate the energy change (ΔE) by taking the difference between the total bond energy of the products and the total bond energy of the reactants:
ΔE = Total bond energy of products - Total bond energy of reactants
= 2242 kJ/mol - 2870 kJ/mol
= -628 kJ/mol
Therefore, the energy change (ΔE) for the decomposition of hydrogen peroxide is -628 kJ/mol. The negative sign indicates that the reaction is exothermic, meaning it releases energy.
Learn more about exothermic reaction here
https://brainly.com/question/2924714
#SPJ4
Consider a sample of perfect gas (0.10 mol held inside a cylinder by a piston such that the volume is 1.25 dm3. The external pressure is constant at 1.00 bar and the cylinder rests in bath at constant temperature 300 K. The gas expands when the piston is released. Calculate i) The volume of the gas when the expansion is complete. ii) The work done when the gas expands. iii) The heat absorbed by the gas during expansion. iv) Total change in entropy.
i) The volume of the gas when the expansion is complete is approximately 2.49 dm³.
ii) The work done when the gas expands is -124 J.
iii) The heat absorbed by the gas during expansion is -124 J.
iv) The total change in entropy during the expansion is zero.
What is Ideal gas law?
The ideal gas law (PV = nRT) relates the macroscopic properties of ideal gases. An ideal gas is a gas in which the particles (a) do not attract or repel one another and (b) take up no space (have no volume).
To solve the given problem, we can use the ideal gas law and the first law of thermodynamics. Let's calculate each part step by step:
i) The volume of the gas when the expansion is complete:
Since the external pressure is constant, we can use the ideal gas law to find the final volume of the gas. The ideal gas law is given by:
PV = nRT
Where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature.
Given:
P = 1.00 bar = 1.00 × 10⁵ Pa (since 1 bar = 10⁵ Pa)
n = 0.10 mol
R = 8.314 J/(mol·K)
T = 300 K
Rearranging the ideal gas law equation to solve for V:
V = (nRT) / P
Plugging in the values:
V = (0.10 mol × 8.314 J/(mol·K) × 300 K) / (1.00 × 10⁵ Pa)
Calculating the volume:
V ≈ 2.49 dm³
Therefore, the volume of the gas when the expansion is complete is approximately 2.49 dm³.
ii) The work done when the gas expands:
The work done by the gas during expansion can be calculated using the equation:
Work = -Pext * ΔV
Where Pext is the external pressure and ΔV is the change in volume.
Given:
Pext = 1.00 bar = 1.00 × 10⁵ Pa
ΔV = Vfinal - Vinitial = 2.49 dm³ - 1.25 dm³ = 1.24 dm³
Converting ΔV to SI units:
ΔV = 1.24 dm³ = 1.24 × 10⁻³ m³
Calculating the work done:
Work = -(1.00 × 10⁵ Pa) * (1.24 × 10⁻³ m³) = -124 J
Therefore, the work done when the gas expands is -124 J (negative sign indicates work done on the gas).
iii) The heat absorbed by the gas during expansion:
According to the first law of thermodynamics, the change in internal energy (ΔU) of the gas is equal to the heat (Q) absorbed by the gas minus the work (W) done on the gas:
ΔU = Q - W
Since the expansion is taking place at constant temperature, the change in internal energy (ΔU) is zero (as internal energy depends only on temperature for an ideal gas).
Therefore, in this case, the heat absorbed by the gas (Q) is equal to the work done (W):
Q = W = -124 J
Thus, the heat absorbed by the gas during expansion is -124 J.
iv) The total change in entropy:
The total change in entropy (ΔS) can be calculated using the equation:
ΔS = ΔU / T
Since ΔU is zero (as explained above) and the temperature (T) is constant at 300 K, the total change in entropy is also zero.
Therefore, the total change in entropy during the expansion is zero.
In summary:
i) The volume of the gas when the expansion is complete is approximately 2.49 dm³.
ii) The work done when the gas expands is -124 J.
iii) The heat absorbed by the gas during expansion is -124 J.
iv) The total change in entropy during the expansion is zero.
To learn more about Ideal Gas Law from the given link
https://brainly.com/question/27870704
#SPJ4
When 2.16 g of H2 reacts with excess O2 by the following equation, 258 kJ of heat are released.
What is the change of enthalpy associated with the reaction of 1 mol of hydrogen gas?
2H2 + O2 ⟶ 2H2O
*Round your answer to the nearest whole number.
*Include a negative sign if appropriate.
The change of enthalpy associated with the reaction of 1 mol of hydrogen gas is -241 kJ. This is calculated by dividing the heat released when 2.16 g of hydrogen gas reacts by the mass of 1 mol of hydrogen gas.
The change of enthalpy associated with the reaction of 1 mol of hydrogen gas can be determined by calculating the molar heat of reaction. Given that 2.16 g of H2 reacts with excess O2 and releases 258 kJ of heat, we can use this information to find the molar heat of reaction.
To calculate the molar heat of reaction, we first need to convert the mass of hydrogen gas to moles. The molar mass of hydrogen gas (H2) is 2 g/mol, so 2.16 g of H2 corresponds to (2.16 g / 2 g/mol) = 1.08 mol of H2.
Next, we divide the amount of heat released (258 kJ) by the number of moles of H2 (1.08 mol) to find the molar heat of reaction.
Molar heat of reaction = (258 kJ / 1.08 mol) ≈ 238.9 kJ/mol.
Rounding the result to the nearest whole number, the change of enthalpy associated with the reaction of 1 mol of hydrogen gas is approximately -239 kJ/mol. The negative sign indicates that the reaction is exothermic, releasing heat.
To learn more about enthalpy here brainly.com/question/29145818
#SPJ11
Write a complete and balanced equation for the reaction of solid magnesium and silver nitrate solution.
The balanced equation for the reaction of solid magnesium and silver nitrate solution is: `Mg(s) + 2AgNO₃(aq) → Mg(NO₃)₂(aq) + 2Ag(s)`.
This equation shows that one atom of magnesium reacts with two molecules of silver nitrate to produce one molecule of magnesium nitrate and two atoms of solid silver. The coefficients in the equation are balanced to ensure that the same number of atoms of each element are present on both sides of the equation.
In this reaction, magnesium is a more reactive metal than silver, so it displaces the silver from the silver nitrate solution. This is an example of a single replacement reaction, in which one element replaces another in a compound.
Overall, this reaction is exothermic, meaning that it releases heat energy as it occurs. The balanced equation allows us to predict the amount of each reactant and product that will be present in the reaction, as well as the energy changes that will occur.
To know more about exothermic click on below link:
https://brainly.com/question/4345448#
#SPJ11
Choose the larger atom from each of the following pairs.
A. Al or In
B. Si or N
C. P or Pb
D. Si or Cl
The larger atom from each of the following pairs are Al or In:In is a larger atom. Si or N:N is a larger atom.P or Pb:Pb is a larger atom.Si or Cl:Cl is a larger atom
This is because the atomic radius increases down a group and In is below Al in the periodic table. Atomic radii of Al and In are 143 pm and 167 pm, respectively.Si or N:N is a larger atom. This is because the atomic radius increases down a group and N is below Si in the periodic table. Atomic radii of Si and N are 111 pm and 155 pm, respectively.P or Pb:Pb is a larger atom. This is because the atomic radius increases down a group and Pb is below P in the periodic table. Atomic radii of P and Pb are 98 pm and 202 pm, respectively.Si or Cl:Cl is a larger atom. This is because the atomic radius increases down a group and Cl is below Si in the periodic table. Atomic radii of Si and Cl are 111 pm and 99 pm, respectively.
Learn more about atom here:
https://brainly.com/question/1566330
#SPJ11
Consider the following neutral electron configurations in which n has a constant value. Which configuration would belong to the element with the most negative electron affinity, Ea?
View Available Hint(s)
a. 52
b. 525p2
c. 5s25p
d. 5825p
The electron affinity (Ea) of an element is the energy change that occurs when an electron is added to a neutral atom, and it is defined as a negative quantity because energy is absorbed in the process. The greater the electron affinity of an element, the more energy it requires to add an electron to its atom.
Among the following neutral electron configurations in which n has a constant value, the configuration that would belong to the element with the most negative electron affinity, Ea is 5s25p2 (option C)
Among the provided electron configurations, the element with the most negative electron affinity (Ea) will be the one that requires the most energy to add an electron to its neutral atom. If an electron is added to an atom with a large electron affinity, the resulting anion will be unstable, and the added electron will undergo rapid decay. Thus, the greater the electron affinity, the less stable the resulting anion. The electron affinity of an atom is influenced by its atomic radius, electron configuration, and other factors. Among the provided configurations, 5s25p2 belongs to the element with the most negative electron affinity.
Learn more about electron affinity here,
https://brainly.com/question/14000116
#SPJ11
PLEASE ANSWER QUICK!!!! 35 POINTS RIGHT ANSWERS ONLY!!!!!!!
How much energy does the water in this experiment absorb according to the calorimeter data?
The heat energy absorbed by the water in the experiment according to the calorimeter data is 10450 J
How do i determine the heat energy absorbed by the water?From the question give above, the following data were obtained:
Mass of water (M) = 100.0 gSpecific heat capacity of water (C) = 4.18 J/gºC Initial temperature of water (T₁) = 21.2 °CFinal temperature of water (T₂) = 46.2 °CChange in temperature (ΔT) = 46.2 - 21.2 = 25 °C Heat absorbed by water (Q) =?From calorimetry, we understood that heat absorbed is given by the following formula
Q = MCΔT
Inputting the given parameters, we can obtain the heat absorbed by the water as follow:
Q = 100 × 4.18 × 25
Q = 10450 J
Thus, we can conclude that the heat energy absorbed by the water is 10450 J
Learn more about heat energy absorbed:
https://brainly.com/question/29224546
#SPJ1
The oxygen in water behaves as though it’s , and the hydrogens behave as though they’re
The oxygen in water behaves as though it’s electronegative, and the hydrogens behave as though they’re electropositive. This is due to the difference in electronegativity between oxygen and hydrogen.
Oxygen is more electronegative than hydrogen, which means that it has a stronger attraction for electrons. As a result, the electrons in a water molecule spend more time around the oxygen atom than they do around the hydrogen atoms.
The oxygen in water is said to be electronegative, while the hydrogens behave as if they're electropositive. This is due to the disparity in electronegativity between the two atoms. Oxygen is more electronegative than hydrogen, implying that it has a stronger attraction for electrons.
Electronegativity is a measure of an atom's ability to attract electrons. It helps to explain why the electrons in a water molecule spend more time around the oxygen atom than they do around the hydrogen atoms.
To know more about electrons visit:
brainly.com/question/12001116
#SPJ11
An increase in temperature of ten degrees Celsius will have what effect on the rate? Select the correct answer below: O the rate will double O the rate will quadruple O the rate will be cut in half O depends on the reaction
An increase in temperature of ten degrees Celsius will typically have a significant effect on the rate of a reaction. The specific outcome, whether the rate doubles, quadruples, is halved, or depends on the reaction, depends on the nature of the reaction and the associated rate equation.
The effect of temperature on the rate of a reaction can be determined by the Arrhenius equation and the concept of reaction rate constant (k). In general, an increase in temperature leads to an increase in the rate of a reaction. The Arrhenius equation states that the rate constant (k) is exponentially dependent on temperature (T) through the term exp(-Ea/RT), where Ea is the activation energy, R is the gas constant, and T is the absolute temperature.
When the temperature increases, the exponential term in the Arrhenius equation becomes larger, resulting in a higher rate constant. As a consequence, the rate of the reaction tends to increase. However, the exact relationship between temperature and rate depends on the specific rate equation for the reaction. Therefore, without knowledge of the specific reaction and its rate equation, it is not possible to determine the exact outcome of increasing the temperature by ten degrees Celsius. It could lead to the rate doubling, quadrupling, being halved, or having a different effect altogether, depending on the particular reaction and its associated rate equation.
Learn more about temperature here: https://brainly.com/question/23411503
#SPJ11
There are several reagents that can be used to effect addition to a double bond, including: acid and water, oxymercuration-demercuration reagents, and hydroboration-oxidation reagents. Inspect the final product and select all the reasons why oxymercuration-demercuration was chosen to effect the following transformation instead of the other reagents.
- Oxymercuration-demercuration reagents prevent sigmatropic rearrangements
- Oxymercuration-demercuration reagents favor sigmatropic rearrangements, Addition with acid and water as reagents avoids sigmatropic rearrangements.
- Addition with acid and water as reagents allows sigmatropic rearrangements.
- Hydroboration-oxidation reagents yield the anti-Markovnikov product of addition.
- Hydroboration-oxidation reagents yield the Markovnikov product of addition,
- The reaction requires the Markovnikov product without sigmatropic rearrangement.
- The reaction requires the anti-Markovnikov product with sigmatropic rearrangement.
Several reagents can be used to effect addition to a double bond, including acid and water, hydroboration-oxidation reagents, and oxymercuration-demercuration reagents. The reasons why oxymercuration-demercuration was chosen to effect the following transformation instead of the other reagents are as follows:
1. Oxymercuration-demercuration reagents prevent sigmatropic rearrangements
2. Hydroboration-oxidation reagents yield the anti-Markovnikov product of addition.
3. The reaction requires the Markovnikov product without sigmatropic rearrangement.
The answer is option A, option D, and option F.
Oxymercuration-demercuration reagents are used to prevent sigmatropic rearrangements. The product produced by the hydroboration-oxidation of alkene is the anti-Markovnikov product of addition while oxymercuration-demercuration reagents give the Markovnikov product of addition. The reaction required the Markovnikov product without sigmatropic rearrangement.Therefore, the reasons why oxymercuration-demercuration was chosen to effect the following transformation instead of the other reagents are oxymercuration-demercuration reagents prevent sigmatropic rearrangements, hydroboration-oxidation reagents yield the anti-Markovnikov product of addition, and the reaction requires the Markovnikov product without sigmatropic rearrangement. The answer is option A, option D, and option F.
To know more about anti-Markovnikov visit:
https://brainly.com/question/9519280
#SPJ11
Convert the radius of an Na+ ion to meters
The radius of an Na+ ion is approximately 1.86 × [tex]10^{-10}[/tex] meters.
The radius of an Na+ ion, commonly known as a sodium ion, can be converted to meters using the given data.
The atomic radius of sodium is approximately 186 picometers (pm).
However, when sodium loses an electron and forms a sodium ion (Na+), the ion becomes smaller due to the removal of an electron shell.
To convert the radius to meters, we need to use the conversion factor: 1 meter = 1 × [tex]10^{12}[/tex] picometers.
By multiplying the atomic radius by this conversion factor, we can obtain the radius in meters.
Radius of Na+ ion = Atomic radius of sodium = 186 pm
Converting the radius to meters:
Radius in meters = 186 pm × (1 m / 1 × [tex]10^{12}[/tex]pm)
Simplifying the expression:
Radius in meters = 186 × [tex]10^{12}[/tex] meters
Hence, the radius of an Na+ ion is approximately 1.86 × [tex]10^{10}[/tex] meters.
In summary, the radius of an Na+ ion is approximately 1.86 × [tex]10^{10}[/tex]meters after converting the atomic radius of sodium (186 picometers) to meters using the conversion factor 1 meter = 1 × [tex]10^{12}[/tex] picometers.
For more questions on ion
https://brainly.com/question/13692734
#SPJ8
The radius of an Na+ ion is typically about 0.095 nanometers. Using conversion factors, we can convert this number to 9.5 x 10^-11 metres.
Explanation:In order to convert the radius of an Na+ ion to meters, first, we need to know the actual radius. The radius of a sodium ion (Na+) is approximately 0.095 nanometers. To convert that to meters, you would use the fact that one meter equals 1 billion nanometers. So you simply multiply 0.095 by 1 billion (10^9) to convert from nanometers to meters. Therefore, the radius of a Na+ ion in meters is 0.095 x 10^-9 meters, which equals 9.5 x 10^-11 meters.
Learn more about Conversion here:https://brainly.com/question/34235911
#SPJ2
Consider a Hydrogen atom with the electron in the n = 9 shell. What is the energy of this system? (The magnitude of the ground state energy of the Hydrogen atom is 13.6 eV.)
Tries 0/20 How many subshells are in this shell?
Tries 0/20 How many electron orbits are in this main shell?
Tries 0/20 How many electrons would fit in this main shell?
Tries 0/20
The energy of the system is -0.17 eV. There are 9 subshells in this shell. There are 9 electron orbits in the main shell. The maximum number of electrons that would fit in the n = 9 shell is 162.
The energy of the Hydrogen atom with the electron in the n = 9 shell can be calculated using the formula:
[tex]$$E_n = -\frac{13.6}{n^2} \ eV$$[/tex]
where n is the principal quantum number. So, substituting n = 9:
[tex]$$E_9 = -\frac{13.6}{9^2} \ eV = -0.17 \ eV$$[/tex]
Therefore, the energy of the Hydrogen atom with the electron in the n = 9 shell is -0.17 eV.
In the n = 9 shell, there are 9 subshells. This is because the maximum number of subshells in a shell is equal to the value of the principal quantum number.
In the n = 9 shell, there are 9 electron orbits. This is because the maximum number of electron orbits in a shell is equal to the value of the principal quantum number.
In the n = 9 shell, the maximum number of electrons that can fit is given by the formula:
[tex]$$2n^2 = 2(9)^2 = 162$$[/tex]
Therefore, the maximum number of electrons that would fit in the n = 9 shell is 162.
Learn more about hydrogen here:
https://brainly.com/question/31657379
#SPJ11
consider a buffer made by adding 49.9 g of (ch₃)₂nh₂i to 250.0 ml of 1.42 m (ch₃)₂nh (kb = 5.4 x 10⁻⁴) a) What is the pH of this buffer?
b) What is the pH of the buffer after 0.300 mol of H⁺ have been added?
c) What is the pH of the buffer after 0.120 mol of OH⁻ have been added?
a) Calculation of pH of the given buffer:Given, Mass of (CH3)2NH2I = 49.9 gVolume of (CH3)2NH2I solution = 250.0 mLConcentration of (CH3)2NH = 1.42M= 1.42 moles/L
Let's first calculate the moles of (CH3)2NH and (CH3)2NH2+CH3NH2+(aq) ⇌ CH3NH3+(aq) + OH-(aq)Kb = 5.4 × 10^-4Kw = 1.0 × 10^-14Kb = [CH3NH3+][OH-]/[CH3NH2+][OH-]= [CH3NH3+]/[CH3NH2+][OH-]Initial concentration of CH3NH2+ = 1.42MInitial concentration of CH3NH3+ = 0pH of the buffer is calculated using the following formula:pH = pKa + log [A-]/[HA]The pKa of (CH3)2NH is 10.73, and at pH 10.73, the ratio [A-]/[HA] is 1, so the pH of the buffer can be calculated from the following equation:pH = pKa + log [A-]/[HA]pH = 10.73 + log (0.0045/0.0045)pH = 10.73b) Calculation of pH of buffer after addition of 0.300 mol of H+:The balanced chemical equation for the addition of H+ is:CH3NH2(aq) + H+(aq) ⇌ CH3NH3+(aq)Initial concentration of CH3NH2+ = 1.42 MInitial concentration of CH3NH3+ = 0 molesLet x be the concentration of H+ after it is added.CH3NH2+(aq) + H+(aq) ⇌ CH3NH3+(aq)H+ is consumed by CH3NH2 and added to CH3NH3+.[H+] = [CH3NH3+] - [CH3NH2+]Let [CH3NH2+] = y[H+] = 0.3 mol/L – y[CH3NH3+] = yKb = [CH3NH3+][OH-]/[CH3NH2+][OH-]5.4 × 10^-4 = y(0.3-y)/ yMoles of CH3NH3+ = yMoles of CH3NH2+ = 0.42 - y1.42 = (y/0.3-y)y = 0.042 mol/L[OH-] = Kb * [CH3NH3+]/[CH3NH2+]5.4 × 10^-4 = 0.042(0.042)/0.258pOH = 3.298pH = 14 – 3.298 = 10.702c) Calculation of pH of buffer after the addition of 0.120 mol of OH-:The balanced chemical equation for the addition of OH- is:CH3NH2(aq) + OH-(aq) ⇌ CH3NH3+(aq) + H2O(l)Initial concentration of CH3NH2+ = 1.42 MInitial concentration of CH3NH3+ = 0 molesLet x be the concentration of OH- after it is added.CH3NH2+(aq) + OH-(aq) ⇌ CH3NH3+(aq) + H2O(l)OH- is consumed by CH3NH3+ and added to CH3NH2+.[OH-] = [CH3NH2+] - [CH3NH3+]Let [CH3NH2+] = y[OH-] = 0.120 mol/L – y[CH3NH3+] = yKb = [CH3NH3+][OH-]/[CH3NH2+][OH-]5.4 × 10^-4 = y(y)/ (1.42 – y)Moles of CH3NH3+ = yMoles of CH3NH2+ = 1.42 – y(5.4 × 10^-4 = y^2 / (1.42 – y)0 = y^2 – 5.4 × 10^-4 y – 7.668 × 10^-4y = (0.00054 ± sqrt((5.4 × 10^-4)^2 + 4(7.668 × 10^-4)) / 2 = 0.00729 mol/LCH3NH2+ = 1.42 – y = 1.41 M[OH-] = Kb * [CH3NH3+]/[CH3NH2+]5.4 × 10^-4 = y(0.00729)/1.41[OH-] = 2.786 × 10^-6pOH = 5.56pH = 8.44 (as pOH + pH = 14)
To know more about buffer visit:
https://brainly.com/question/30889493
#SPJ11
suppose a saturated solution of this solute was made using 41.0 g h2o at 20.0 °c. how much more solute can be added if the temperature is increased to 30.0 ∘c?
If a saturated solution of a solute is made using 41.0 g of H2O at 20.0 °C, the amount of additional solute that can be added when the temperature is increased to 30.0 °C depends on the solubility of the solute. The solubility of most substances tends to increase with temperature, so more solute can be dissolved. The specific solubility data or a solubility curve is needed to determine the exact amount of additional solute that can be added.
When the temperature of a solvent increases, the solubility of many substances generally increases as well. This means that more solute can be dissolved in the solvent. However, the amount of additional solute that can be added when the temperature is increased from 20.0 °C to 30.0 °C depends on the solubility characteristics of the specific solute.
To determine the exact amount of additional solute that can be added, one would need to consult the solubility data or a solubility curve for the particular solute at different temperatures. These resources provide information on the maximum amount of solute that can be dissolved in a given amount of solvent at various temperatures. By referring to the solubility data, one can find the maximum solubility of the solute at 30.0 °C and calculate the difference between the currently saturated solution and the new solubility value to determine how much more solute can be added.
To learn more about saturated solution, refer:
brainly.com/question/1851822
#SPJ11
Which of the following is a colloid? Select the correct answer below: Identify properties of colloids Question Which of the following is a colloid? Select the correct answer below: Brass O Air Tempera paint An opal
The correct answer among the following is option C which is Tempera paint.
Explanation: A colloid is a heterogeneous mixture in which one substance is dispersed throughout another substance. The dispersed substance can either be a solid, liquid or gas and is referred to as the dispersed phase or internal phase and the substance in which it is dispersed is called the continuous phase or external phase. In tempera paint, pigment is dispersed throughout an emulsion of water and egg yolk, making it a colloid.
Brass is an alloy of copper and zinc, and is therefore a homogeneous mixture. Air is a mixture of gases, and is not a colloid. An opal is a mineral and not a mixture. Therefore, the correct answer is option C which is Tempera paint.
Learn more about colloid here https://brainly.in/question/28896908
#SPJ11
which one of the following compounds will not be soluble in water? k2s baso4 nano3 lioh
The compound that will not be soluble in water is BaSO₄ (barium sulfate). Option B is correct.
BaSO₄ (barium sulfate) is the compound that is not soluble in water. Solubility in water depends on the nature of the compound and the interactions between its constituent ions and water molecules. In the case of BaSO₄, the strong electrostatic forces of attraction between the barium (Ba²⁺) and sulfate (SO₄²⁻) ions result in a very low solubility in water. The solubility rules dictate that most sulfates are soluble in water, but barium sulfate is an exception.
It forms a solid precipitate when barium ions and sulfate ions come into contact in an aqueous solution. On the other hand, K₂S (potassium sulfide), NaNO₃ (sodium nitrate), and LiOH (lithium hydroxide) are all soluble in water and will dissociate into their constituent ions when dissolved, resulting in a homogeneous solution. Option B is correct.
To know more about the Compounds, here
https://brainly.com/question/11501306
#SPJ4
Which statement is TRUE regarding the Lewis structure for NO3?
a. It will exhibit different resonance structures.
b. The formal charge on each atom is zero. c. A total of 23 valence electrons are represented. d. It includes only singe bonds.
It will exhibit different resonance structures.
The Lewis structure for NO3 represents the electronic structure of nitrate ion. This structure includes resonance, meaning that the double bonds in the compound are not found at a specific location but rather can be present in different places.The Lewis structure for NO3 is shown below:Option a is the correct statement. The Lewis structure for NO3 will exhibit different resonance structures, as mentioned earlier. Since the double bond in the molecule can occur in different places, the molecule exhibits resonance. This is what is meant by different resonance structures.Options b, c, and d are incorrect as they contain false information. The formal charge on each atom in NO3 is not zero, but rather, the central nitrogen atom in NO3 has a formal charge of +1, while each of the oxygen atoms has a formal charge of -1. The number of valence electrons in NO3 is 24, and the structure includes both single and double bonds.
Option A is the correct answer of this question.
Learn more about resonance structures here:
https://brainly.com/question/25022370
#SPJ11
mr. t has a gold chain with a mass of 100 grams. the density of gold is 19.3 g/cm3. in liters, what is the volume of mr. t’s gold chain?
To determine the volume of Mr. T's gold chain in liters, we need to use the density of gold and the mass of the chain. The density of gold is given as 19.3 g/cm3, and the mass of the chain is 100 grams. By dividing the mass by the density, we can calculate the volume of the gold chain. To convert the volume from cubic centimeters (cm3) to liters, we divide by 1000.
The density of a substance is defined as its mass per unit volume. In this case, the density of gold is given as 19.3 g/cm3. Mr. T's gold chain has a mass of 100 grams.
To calculate the volume, we use the formula:
Volume = Mass / Density
Substituting the given values, we have:
Volume = 100 g / 19.3 g/cm3
Calculating the result, we find:
Volume = 5.18 cm3
To convert the volume from cubic centimeters (cm3) to liters, we divide by 1000:
Volume = 5.18 cm3 / 1000 = 0.00518 liters
Therefore, the volume of Mr. T's gold chain is approximately 0.00518 liters.
To learn more about density, refer:
brainly.com/question/6107689
#SPJ11
an ordered list of chemical substances is shown. chemical substances 1 al 2 o2 3 h2o 4 so2 5 al2o3 6 co2 which substances in the list can be used to write a complete combustion reaction?
The substances in the list can be used to write a complete combustion reaction are:
Al (aluminum)O₂ (oxygen)H₂O (water)CO₂ (carbon dioxide)How to write the complete combustion reactionTo write a complete combustion reaction, we need a fuel (usually a hydrocarbon or carbon-based compound) and an oxidizing agent (typically oxygen). Based on the provided list of chemical substances, the following substances can be used to write a complete combustion reaction:
Al (aluminum)
O₂ (oxygen)
H₂O (water)
CO₂ (carbon dioxide)
These substances can be combined to form a complete combustion reaction. For example, the reaction between aluminum (Al) and oxygen (O2) can result in the formation of aluminum oxide (Al₂O₃):
4 Al + 3 O₂ → 2 Al₂O₃
Read morte on complete combustion reaction here https://brainly.com/question/13251946
#SPJ4
Which of the following endings is generally associated with a monatomic anion?
A. ...ade
B. ...ate
C. ...ic
D. ...ide
The ending generally associated with a monatomic anion is option D, "...ide."
Monatomic anions are formed when an atom gains one or more electrons, resulting in a negatively charged ion.
The names of monatomic anions typically end in "...ide."
To illustrate this, let's consider a few examples:
- Chlorine, an element in Group 17 of the periodic table, forms a monatomic anion by gaining one electron. The resulting ion is called chloride (Cl^-).
- Oxygen, an element in Group 16 of the periodic table, forms a monatomic anion by gaining two electrons. The resulting ion is called oxide (O^2-).
- Nitrogen, an element in Group 15 of the periodic table, forms a monatomic anion by gaining three electrons. The resulting ion is called nitride (N^3-).
From these examples, we can observe that the names of monatomic anions end in "...ide."
In conclusion, the ending generally associated with a monatomic anion is option D, "...ide."
This ending is characteristic of anions formed when atoms gain electrons to achieve a stable electron configuration.
To know more about monatomic visit:
https://brainly.com/question/30451494
#SPJ11
if the temperature of a radiator is increased from 27ºc to 54ºc, by what factor does the radiating power change?
The power radiated by the radiator changes by a factor of 14.1573 when the temperature is increased from 27°C to 54°C.
The formula that relates the power radiated by an object with the fourth power of the temperature is known as the Stefan-Boltzmann Law. It is stated as follows: P = σA(T⁴), where P is the power radiated, σ is the Stefan-Boltzmann constant (5.67 × 10⁻⁸ W/m²K⁴), A is the surface area of the radiator, and T is the temperature in Kelvin.
We must first convert the temperature to Kelvin:
TK = T°C + 273.15
TK1 = 27°C + 273.15 = 300.15 K
TK2 = 54°C + 273.15 = 327.15 K
The factor by which the power radiated changes is the ratio of the power at the new temperature to the power at the original temperature. The equation is as follows:
P2/P1 = (T2/T1)⁴
Substituting the given values:
P2/P1 = (327.15/300.15)⁴
P2/P1 = 1.8856⁴
P2/P1 = 14.1573
You can learn more about the temperature at: brainly.com/question/7510619
#SPJ11
a ____________________ is a stream from which water is moving downward to the water table?
A "percolating stream" is a stream from which water is moving downward to the water table.
A percolating stream generally refers to a type of stream or water flow that occurs when water moves downward through permeable materials such as soil, sand, or rock, gradually infiltrating into the ground. The water follows a vertical or nearly vertical path, seeping through the interconnected spaces and pores within the subsurface layers.
This movement is often driven by gravity, as water percolates or filters through the porous medium. Percolating streams contribute to groundwater recharge, replenishing underground water reservoirs and influencing the overall hydrological cycle.
Learn more about percolating stream from the link given below.
https://brainly.com/question/30410369
#SPJ4
A 4.0- kg cylinder of solid iron is supported by a string while submerged in water. What is the tension in the string? The density of iron is 7860 kg/m3 and that of water is 1000 kg/m3 . A) 34 N B) 2.5 N C) 20 N D) 40 N E) 24 N
The tension in the string is approximately 39.2 N.
The closest option provided is D) 40 N. Hence, option D is correct.
Given:
Mass of iron cylinder = 4.0 kg
Density of iron = 7860 kg/m³
Density of water = 1000 kg/m³
Gravitational acceleration = 9.8 m/s²
To calculate the tension in the string, we need to compare the weight of the iron cylinder with the buoyant force exerted on it.
Weight of the iron cylinder = mass of iron cylinder × gravitational acceleration
Buoyant force = weight of water displaced = weight of the iron cylinder
Since the iron cylinder is submerged in water, the buoyant force is equal to the weight of the iron cylinder.
Now let's calculate the tension in the string:
Weight of the iron cylinder = mass of iron cylinder × gravitational acceleration
Weight of the iron cylinder = 4.0 kg × 9.8 m/s²
Since the weight of the iron cylinder is equal to the buoyant force, the tension in the string is also equal to the weight of the iron cylinder.
Therefore, the tension in the string supporting the submerged iron cylinder is:
Tension = Weight of the iron cylinder
Now we can calculate the tension:
Tension = 4.0 kg × 9.8 m/s²
Tension = 39.2 N
So, the tension in the string is approximately 39.2 N.
The closest option provided is D) 40 N. Hence, option D is correct.
Learn more about Tension from the link given below.
https://brainly.com/question/30037765
#SPJ4
A) The pKa values for oxalic acid, H2C2O4 are: 1.23 and 4.19respectively. Write each equilibrium acid dissociation reactionwith water with its respective Ka value.
B) Write the equilibrium base reaction with water for eachconjugate bases in the reactions in part a and include eachrespective Kb value.
A)Acid Dissociation Reactions of Oxalic Acid. The ionization constant (Ka) of oxalic acid is given by the reaction:H_{2}C_{2}O_{4 }+ H_{2}O ⇌ H_{3}O+ + HC_{2}O_{4-}.
B)The equilibrium constant for the basic dissociation of a conjugate base is given by Kb. Kb values are the opposite of Ka values (Kb = Kw/Ka) and are also used to compare the strength of a base's conjugate acid.
A) Acid Dissociation Reactions of Oxalic Acid. The ionization constant (Ka) of oxalic acid is given by the reaction:H_{2}C_{2}O_{4 }+ H_{2}O ⇌ H_{3}O+ + HC_{2}O_{4-}; Ka1 = 5.90 × 10-2 The reaction above describes the primary ionization of oxalic acid, where one of the two acidic hydrogen ions (protons) is lost. The loss of the second hydrogen ion is given by the second equilibrium:H_{2}C_{2}O_{4 }+ H_{2}O ⇌ H_{3}O^{+}+ C_{2}O_{4}^{2-}; Ka2 = 6.40 * 10^{-5} Oxalic acid is a diprotic acid, implying that it has two dissociable protons. It can thus release two protons when dissolved in water. The stronger the acid, the weaker its conjugate base, which means that the conjugate base of the first equilibrium is stronger than that of the second equilibrium.
B) Base Reaction with Water for Each Conjugate BaseThe corresponding base reactions with water for the conjugate bases are:H_{2}C_{2}O_{4 }+ H_{2}O ⇌ H_{3}O+ + HC_{2}O_{4-}; Ka1 = 5.90 * 10-2 H_{2}C_{2}O_{4 }+ H_{2}O ⇌ H_{3}O^{+}+ C_{2}O_{4}^{2-}; Ka2 = 6.40 × 10-5.The equilibrium constant for the basic dissociation of a conjugate base is given by Kb. Kb values are the opposite of Ka values (Kb = Kw/Ka) and are also used to compare the strength of a base's conjugate acid.
Learn more about Refer: https://brainly.com/question/10669929
#SPJ11
Which of the choices correctly ranks the following compounds from lowest level of oxidation to highest level of oxidation? 1= CH3CHO 2= CH2=CH2 3= CH3CO2H A) I<2<3 B) 2< 1<3 C) 1<3<2 D) 3<2< 1 E) 2<3< 1 2.
The correct order of increasing oxidation states of the given compounds is as follows.1 < 3 < 2.
The oxidation state (oxidation number) of an atom reflects the number of electrons lost or gained by the atom while forming a chemical bond. The oxidation states can be used to determine the relative degree of oxidation of a substance. Here, we will determine the correct order of increasing oxidation states of the given compounds.
Option (C) 1 < 3 < 2 is the correct option among the given options.
The oxidation state of each compound is as follows:
CH3CHO The oxidation state of the carbon atom of the carbonyl group is +2. Oxidation state of the carbon atom of the carbonyl group = +2
Oxidation state of the carbon atom of the CH3 group = -3
The oxidation state of the carbon atom of the carbonyl group and CH3 group can be determined as follows. The oxygen atom has an oxidation state of -2 and the hydrogen atom has an oxidation state of +1. Applying these oxidation states to the molecule, we get the oxidation state of the carbon atom of the carbonyl group and CH3 group as follows.-2 + (2 * -1) = -4 (For carbonyl carbon)1 * 3 = 3 (For CH3 group carbon)
Adding up the oxidation states of carbon in CH3CHO gives -4 + 3 = -1
CH2=CH2
The oxidation state of each carbon atom in ethene is -1.The oxygen atom has an oxidation state of -2 and the hydrogen atom has an oxidation state of +1. Applying these oxidation states to the molecule, we get the oxidation state of the carbon atom as follows.-2 + (2 * -1) = -4 (For both carbons)
Adding up the oxidation states of carbon in CH2=CH2 gives -4 + (-4) = -8
CH3CO2H
The oxidation state of the carbon atom of the carboxyl group is +3, the carbon atom of the carbonyl group is +2, and the other two carbon atoms are -2. The oxidation state of the carbon atom of the carboxyl group = +3
The oxidation state of the carbon atom of the carbonyl group = +2The oxidation state of the other two carbon atoms = -2
The oxygen atom has an oxidation state of -2 and the hydrogen atom has an oxidation state of +1. Applying these oxidation states to the molecule, we get the oxidation state of the carbon atom as follows.2 * -2 = -4 (For carbonyl carbon)1 * 3 = 3 (For carboxyl carbon)2 * -2 = -4 (For other carbons)
Adding up the oxidation states of carbon in CH3CO2H gives -4 + 3 + (-4) + (-2) = -7
Therefore, the correct order of increasing oxidation states of the given compounds is as follows.1 < 3 < 2
Learn more about oxidation states here:
https://brainly.com/question/31688257
#SPJ11
Which of the following acids would be classified as the strongest?
A
CH4
B
NH3
C
H2O
D
HF
E
PH3
HF acid would be classified as the strongest.
HF would be classified as the strongest acid.Hydrogen fluoride (HF) is a colorless liquid or gas, that is extremely corrosive and capable of corroding glass. It's also recognized as an acid of Lewis because of its polar covalent bond and high electron negativity difference. HF is widely used in industrial processes like glass etching, metal pickling, and oil well acidizing.The acidic strength of an acid is determined by its ability to donate a proton or H+ ion. Hydrogen fluoride, also known as hydrofluoric acid (HF), is a highly polar molecule with a hydrogen ion that can easily dissociate when it comes into touch with water. This is the primary reason why HF is known to be the strongest acid in this list. Therefore, option D (HF) would be the correct answer.
Learn more about acids here,
https://brainly.com/question/25148363
#SPJ11
Among the following options, HF (hydrofluoric acid) would be classified as the strongest acid.What is an acid?An acid can be defined as any substance which when dissolved in water releases hydrogen ions. The strength of the acid is directly proportional to the concentration of hydrogen ions in the solution.What makes HF the strongest acid among the options?HF is classified as the strongest acid because it is a covalent compound and the bond between hydrogen and fluorine is highly polarized. As a result, when HF is dissolved in water, it releases hydrogen ions easily and exhibits strong acidic properties.On the other hand, the other options listed are either covalent compounds with weaker polarized bonds or bases. For example, CH4 is a covalent compound that does not release hydrogen ions, NH3 is a weak base that accepts hydrogen ions, H2O is a neutral compound, and PH3 is a weaker acid compared to HF.
calculate the mass in grams for 5.42 x 1022 molecules of propane, c3h8.
The mass of 5.42 x 10²² molecules of propane will be approximately 3.98 grams.
To calculate the mass in grams for a given number of molecules of propane (C₃H₈), you need to determine the molar mass of propane and then use it to convert the number of molecules to grams.
The molar mass of propane (C₃H₈) can be calculated by summing the atomic masses of its constituent elements;
C: 12.01 g/mol
H: 1.008 g/mol (there are 8 hydrogen atoms in propane)
Molar mass of propane (C₃H₈) = (3 × 12.01 g/mol) + (8 × 1.008 g/mol) = 44.11 g/mol
Now, to calculate the mass of 5.42 x 10²² molecules of propane:
1 mole of propane (C₃H₈) = 44.11 g
Therefore, 1 molecule of propane = 44.11 g / (6.022 x 10²³ molecules) (Avogadro's number)
To find the mass of 5.42 x 10²² molecules of propane, we can set up the following conversion;
5.42 x 10²² molecules of propane × (44.11 g / (6.022 x 10²³ molecules))
Simplifying the expression:
(5.42 x 10²²) × (44.11 g / 6.022 x 10²³) = 3.98 grams (rounded to two decimal places)
Therefore, the mass will be 3.98 grams.
To know more about propane here
https://brainly.com/question/14519324
#SPJ4
1.Which element is likely to have the ground-state electron configuration [Kr]5s14d10?
Au
In
Cd
Ag
Cu
The element likely to have the ground-state electron configuration [Kr]5s14d10 is Ag (Silver).
The electron configuration [Kr]5s14d10 corresponds to the filling of the 5s, 4d, and 4p orbitals in an atom. To determine the element with this electron configuration, we need to identify which element has the atomic number corresponding to the electron configuration.
The atomic number of Ag (Silver) is 47. When we fill the electrons based on the periodic table, the noble gas before element 47 is krypton (Kr), which has the electron configuration [Kr]4d105s2. The electron configuration [Kr]5s14d10 indicates that the 5s and 4d orbitals are fully filled, suggesting that the element is silver (Ag).
The other options, Au (Gold), In (Indium), Cd (Cadmium), and Cu (Copper), do not have the electron configuration [Kr]5s14d10. Au has the electron configuration [Xe]6s15d10, In has [Kr]5s24d105p1, Cd has [Kr]5s24d10, and Cu has [Ar]4s13d10.
Therefore, based on the electron configuration provided, the element likely to have the ground-state electron configuration [Kr]5s14d10 is Ag (Silver).
Learn more about electron configuration here:
https://brainly.com/question/29157546
#SPJ11
5. Which species will produce the greatest concentration of hydroxide ions in solution ?
A. CO3^2- B. HF C. HIO3 D. SO3^2-
HIO₃ is a strong acid, it will release a higher concentration of H⁺ ions, leading to a greater concentration of hydroxide ions compared to the other species listed. Hence, option C is correct.
The species that will produce the greatest concentration of hydroxide ions in solution is option C: HIO₃.
HIO₃ is an acid called iodic acid. When it dissolves in water, it will dissociate to release H⁺ ions and IO₃⁻ ions. The H⁺ ions can react with water molecules to form hydronium ions (H₃O⁺), while the IO₃⁻ ions do not directly produce hydroxide ions.
However, in the presence of excess water, the hydronium ions can react with water in a reversible reaction to generate hydroxide ions (OH⁻). This reaction is known as the autoionization of water:
2H₃O⁺ (hydronium ions) ⇌ H₂O + H₃O⁺ + OH⁻
As a result, the concentration of hydroxide ions (OH⁻) increases in the solution. Since HIO₃ is a strong acid, it will release a higher concentration of H⁺ ions, leading to a greater concentration of hydroxide ions compared to the other species listed.
Learn more about concentration of hydroxide ions from the link given below.
https://brainly.com/question/28173930
#SPJ4