8 19. Marcus claims that fractions with denominators 1 through 10 follow a pattern
when they are converted to decimal form. If any one fraction can be converted
to a terminating decimal, then all of the fractions with that same denominator
will also convert to terminating decimals. On the other hand, if one fraction
converts to a repeating decimal, then all fractions with that same denominator
will convert to a repeating decimal. Is Marcus correct? Explain.

The volume of the given rectangular pyramid.

[tex]\large\boxed{Formula:V=\frac{1}{3}lbh}[/tex]

First, multiply the length (5), breadth (4) and height (3).

[tex]5×4×3[/tex]

[tex]= 60 \: cm [/tex]

Now, divide 60 by 3.

[tex]\frac{60}{3}[/tex]

[tex]\large\boxed{V= 20 \: {m}^{3}}[/tex]

Therefore, the volume of the given rectangular pyramid is 20 cubic meters.

Answer:

Option C

Step-by-step explanation:

A clock shows the hour hand slightly past 11 and the minute hand at two marks past the 4.

The statement correctly describes the graph of y = ln(x - 7) + 3 is translated 3 units up as well as 7 units to the right.

The graph of a logarithmic function has a vertical asymptote at x = 0. The graph of a logarithmic function will decrease from left to right

if 0 < b < 1. And if the base of the function is greater than 1, b > 1, then the graph will increase from left to right.

Given graph : y = ln(x), has a vertical and horizontal translation.

As we know, y = ln(x - h) + k | where h is the vertical shift, and k is the horizontal shift.

Therefore, comparing y = ln(x - 7) + 3 it with different function we can write the graph of y = ln(x - 7) + 3 is translated 3 units up as well as 7 units to the right.

Learn more about this concept here:

https://brainly.com/question/9832306

#SPJ1

The domain of the graph is x ≥ -4

From the given graph, we have the following highlights:

Greater than and equal to are represented by ≥.

This means that the symbol that completes the domain of the graph is ≥

Hence, the domain of the graph is x ≥ -4

Read more about domain at:

https://brainly.com/question/1770447

#SPJ1

Answer:

The answer is below :

Step-by-step explanation:

please mark me as brainlest

Answer:

0, 2, 4, 6, 8

Step-by-step explanation:

substitute 1 for n in first term, 2 for n in second term, 3 for n in third term, 4 for n in fourth term, 5 for n in fifth term

2 (1) -2 = 0 first term

2 (2)-2 = 2 second

2 (3)-2 = 4 third

2 (4)-2 =6 fourth

2 (5)-2 =8 fifth

Answer:

58 degrees

Step-by-step explanation:

XYZ is 90 degrees. XYO is 32 degrees. Angle x takes up the space leftover in the right angle, so simply subtract 32 from 90.

90-32= 58

Hope this help! (if it does pls consider giving me brainliest)

Answer:

₹66,000

Step-by-step explanation:

If 5/6 is 55,000 then just multiply 55,000 by the reciprocal  6/5 to get 66,000

Answer:

the first choice is not a polynomial because you can't divide by a variable.

Answer:

235500m3

Step-by-step explanation:

Volume of Cylinder= πr^2h

π=3.14, D=100m, r=D/2, r=100/2, r=50m, h=30m

πr^2h= 3.14×50×50×30

=3.14×75000

=235500m3

By identifying the maximums, we see that in each blank we need to write:

1) 2

2) 2

3) greater.

First, we need to find the maximum of the function g(x).

You can see that for x = 2 we have the maximum of the parabola, which gives y = 9.

Then the maximum profit is got when 2 employees earn overtime.

We also need to find the maximum for the table. Notice that the maximum value of the table also happens for x = 2, and this time the maximum is y = 16.

So we can see that the maximum of Cathy's cupcakes is larger than the maximum of Jimmy's.

If you want to learn more about maximums:

https://brainly.com/question/19819849

#SPJ1

im not in collage but I'll try ok so its most likely

Factor then solve to find the complex solutions.

x=2πn, for any integer n

if i was right could i get brainly?

Answer: this is the wrong answer

Step-by-step explanation:

Answer:

The rule for a rotation by 180° about the origin is (x,y)→(−x,−y).

Step-by-step explanation:

The rotation of angle 180 degree about origin is described below.

Rotation 180° about the origin is a geometric transformation that involves rotating a figure or shape around the point (0,0),

Also known as the origin, by an angle of 180 degrees.

This means that every point on the shape is moved to an equal distance away from the origin but on the opposite side of the origin.

This transformation is a reflection where the shape is flipped along,

the x-axis or y-axis or both, depending on the shape's orientation.

The rotation 180° about the origin is a common transformation in various geometrical applications, such as computer graphics, engineering, and physics.

It is a simple transformation that can be easily represented and performed using matrices or complex numbers.

Therefore,

rotation 180° about the origin is a geometric transformation that is important in various applications and involves rotating a shape around the origin by an angle of 180 degrees, resulting in a reflection of the shape across the x or y-axis.

Learn more about the angle visit:;

https://brainly.com/question/25716982d

#SPJ6

Answer:

Step-by-step explanation:

-3x - 2y + 2(-2) = 19

-3x -2y - 4 = 19

-3x - 2y = 23

2x + y - 6 = -20

2x + y = -14

-3x -2y = 23

2x + y = -14

-3x - 2y = 23

4x + 2y = -28

x = -5

-10 + y = -14

y = -4

x= -5, y = -4, z= -2

Answer:

Formulas

[tex]\textsf{Area of a circle}=\pi r^2 \quad \textsf{(where r is the radius)}[/tex]

[tex]\textsf{Area of a semicircle}=\dfrac{1}{2}\pi r^2 \quad \textsf{(where r is the radius)}[/tex]

[tex]\textsf{Circumference of a circle}=\sf 2 \pi r\quad\textsf{(where r is the radius)}[/tex]

[tex]\textsf{Radius of a circle}=\sf \dfrac{1}{2}d\quad\textsf{(where d is the diameter)}[/tex]

[tex]\textsf{Perimeter of a semicircle}=r(\pi +2) \quad \textsf{(where r is the radius)}[/tex]

Use the above formulas to calculate the various measurements, remembering to calculate the radius first when given the diameter.

a) Radius = 2.7 cm

[tex]\implies \textsf{Area}=\sf \pi (2.7)^2=22.9\:\:cm^2\:(1\:d.p.)[/tex]

[tex]\implies \textsf{Circumference}=\sf 2 \pi (2.7)=17.0\:\:cm\:(1\:d.p.)[/tex]

-----------------------------------------------------------------------

b)  Diameter = 45 mm

[tex]\sf \implies Radius =\dfrac{45}{2}=22.5\:\:mm[/tex]

[tex]\implies \sf Area= \pi (22.5)^2=1590.4\:\:mm^2\:(1\:d.p.)[/tex]

[tex]\implies \sf Circumference= 2 \pi (22.5)=141.4\:\:mm\:(1\:d.p.)[/tex]

a)  Radius = 8.5 cm

[tex]\implies \sf Area=\dfrac{1}{2}\pi (8.5)^2=113.5\:\:cm\:(1\:d.p.)[/tex]

[tex]\sf \implies Perimeter=8.5(\pi +2)=43.7\:\:cm\:(1\:d.p.)[/tex]

-----------------------------------------------------------------------

b)  Radius = 24 mm

[tex]\implies \sf Area=\dfrac{1}{2}\pi (24)^2=904.8\:\:mm\:(1\:d.p.)[/tex]

[tex]\sf \implies Perimeter=24( \pi +2)=123.4\:\:cm\:(1\:d.p.)[/tex]

-----------------------------------------------------------------------

c)  Diameter = 32 cm

[tex]\sf \implies Radius =\dfrac{32}{2}=16\:\:cm[/tex]

[tex]\implies \sf Area=\dfrac{1}{2}\pi (16)^2=402.1\:\:cm\:(1\:d.p.)[/tex]

[tex]\sf \implies Perimeter=16( \pi +2)=82.3\:\:cm\:(1\:d.p.)[/tex]

-----------------------------------------------------------------------

d)  Diameter = 15 m

[tex]\sf \implies Radius =\dfrac{15}{2}=7.5\:\:m[/tex]

[tex]\implies \sf Area=\dfrac{1}{2}\pi (7.5)^2=88.4\:\:m\:(1\:d.p.)[/tex]

[tex]\sf \implies Perimeter=7.5( \pi +2)=38.6\:\:m\:(1\:d.p.)[/tex]

Answer:

  612.5 cm²

Step-by-step explanation:

The ratio of areas of similar figures is the square of the scale factor. The scale factor is the ratio of corresponding side lengths. Here, we must find the scale factor.

__

The only given side of trapezium B corresponds to an unknown side of trapezium A. We can find the length of that unknown side using the area formula.

  A = 1/2(b1 +b2)h . . . . . parallel sides b1, b2; height h

  98 cm² = 1/2(16 cm +b2)(7 cm) . . . . use known values

  28 cm = 16 cm +b2 . . . . . . . . . . divide by 3.5 cm

  b2 = 12 cm . . . . . . . . . . . . . . subtract 16 cm

The top side of trapezium A is 12 cm long.

Now we have the lengths of corresponding (top) sides, so we can find the scale factor. It is their ratio. We choose to express it as (size of B)/(size of A).,

  k = (30 cm)/(12 cm) = 2.5

The area of trapezium B will be that of trapezium A multiplied by the square of the scale factor:

  area B = (k²)(area A) = (2.5²)(area A)

  area B = 6.25×98 cm² = 612.5 cm²

The area of trapezium B is 612.5 cm².

Answer:

Factory A = 1200

Factory B= 1350

Factory C= 1050

Factory D = 1100

Step-by-step explanation:

Factory B as the fastest rate of production

[tex] - 50m + 10 - 3m + ( - 13) \\ - 50m + 10 - 3m - 13 \\ - 53m - 3[/tex]

Hope it helps

please give brainliest

Answer:

10 %

Step-by-step explanation:

15 mn = 1/4 h

We have :

[tex]\frac{\frac{1}{4} }{\frac{5}{2} } =\frac{1}{4} \times \frac{2}{5} =\frac{2}{20} =\frac{1}{10}=0.1[/tex]

Then the percentage that 15 mn represents of 5/2 h is :

0.1 × 100 = 10 %

Question 2.1.1

Reason:

Use the distance formula to find the distance from the origin (0,0) to the terminal point (-3, 4)

[tex](x_1,y_1) = (0,0) \text{ and } (x_2, y_2) = (-3,4)\\\\d = \sqrt{(x_1 - x_2)^2 + (y_1 - y_2)^2}\\\\d = \sqrt{(0-(-3))^2 + (0-4)^2}\\\\d = \sqrt{(0+3)^2 + (0-4)^2}\\\\d = \sqrt{(3)^2 + (-4)^2}\\\\d = \sqrt{9 + 16}\\\\d = \sqrt{25}\\\\d = 5\\\\[/tex]

The pythagorean theorem is a similarly related alternative path you can take.

This triangle is a 3-4-5 right triangle.

====================================================

Question 2.1.2

Reason:

r = distance from origin to terminal point

r = 5, calculated back in the previous problem above.

sin(alpha) = y/r = 4/5

cos(alpha) = x/r = -3/5

sin(alpha)+cos(alpha) = (4/5)+(-3/5) = 1/5

====================================================

Question 2.1.3

Reason:

Recall that tangent is the ratio of sine over cosine

tan = sin/cos

Therefore,

[tex]\tan(\alpha) *\frac{\cos(\alpha)}{\sin(\alpha)}\\\\\frac{\sin(\alpha)}{\cos(\alpha)}*\frac{\cos(\alpha)}{\sin(\alpha)}\\\\\frac{\sin(\alpha)*\cos(\alpha)}{\cos(\alpha)*\sin(\alpha)}\\\\1[/tex]

This assumes that neither sin(alpha) nor cos(alpha) are zero. Otherwise, we have a division by zero error.

Answer:

what does this mean. oh wAit iM dematerializinG mvxhkgd

hdgxmgxmgxkgzkgsktxktdktdktdktdtdkgd

The plot of the graph  y = –1.5(4)^x is shown below of which its domain and range exist on all real values

The standard exponential function is expressed as y = ab^x

where

The exponential function shows an increase along the y-axis and towards the x-axis

According to the equation, we are to plot the graph  y = –1.5(4)^x of which its domain and range exist on all real values

Learn more on exponential function here:  https://brainly.com/question/12940982

#SPJ1

Answer:

42 cm

Step-by-step explanation:

The first rectangle has a length of 4 and a Width of 7. the second rectangle has a length of 2 and a width of 7.

The formula for area of a rectangle is A=l*w

SO,

Rectangle 1: A= L*W

A=4*7

A=28

Rectangle 2:

A=L*W

A=2*7

A=14

Now, add both areas since they are both part of one whole recatngle.

28+14

= 42

Taking into account the definition of ratio and proportion, the airline should sell 440 tickets.

The ratio is the comparison of two quantities and is measured from the division of two values.

The relationship of equality that exists between two ratios, that is, between two comparisons between two determined quantities, is known as a proportion. So if [tex]\frac{a}{b}[/tex] corresponds to the ratio, then [tex]\frac{a}{b}[/tex] = [tex]\frac{c}{d}[/tex] equals a proportion.

An airplane flight has 374 seats. The probability that a person who buys a ticket actually goes on that flight is about 85%. The airline wants to fill all the seats (100%) on the flight.

This can be represented by the proportion:

[tex]\frac{374}{85}[/tex] = [tex]\frac{amount of tickets}{100}[/tex]

Solving:

amount of tickets= 100×[tex]\frac{374}{85}[/tex]

amount of tickets= 440

Finally, the airline should sell 440 tickets.

Learn more about proportion:

https://brainly.com/question/18437927

https://brainly.com/question/26485348

#SPJ1

The quadrilateral RSTU be a parallelogram if opposite angles R and T are congruent to each other if x = 35 option first is correct.

It is defined as the four-sided polygon in geometry having four edges and four corners.

We have:

The angle measures of quadrilateral RSTU are shown.

m∠R = (2x)°

m∠S = (3x – 35)°

m∠T = (x + 35)°

If R and T are congruent:

2x = x + 35

x = 35 degree

Opposite angles R and T are congruent to each other if x = 35.

Thus, the quadrilateral RSTU be a parallelogram if opposite angles R and T are congruent to each other if x = 35 option first is correct.

Learn more about the quadrilateral here:

brainly.com/question/6321910

#SPJ1

Answer:

It's c

Step-by-step explanation:

On edge 2023

Answer:

16'

Step-by-step explanation:

4'

4 equal sides

4+4+4+4=16

Answer: Permimeter of a 4’ square is 16.

Step-by-step explanation:

given that:

• length = 4

∴ Perimeter of Square = 4 x length

⇒ P = 4 × 4

⇒ P = 16 units ...answer...

hope that helps...