To determine the molar concentration of the H2SO4(aq) solution, we need to use the relationship between molality, molar mass, and density.
Molarity = (molality * molar mass) / density
Given that the molality is 2.55 and the density is 1.151 g/ml, we need to find the molar mass of H2SO4.
(2 * atomic mass of hydrogen) + atomic mass of sulfur + (4 * atomic mass of oxygen)
(2 * 1.008 g/mol) + 32.06 g/mol + (4 * 16.00 g/mol) = 98.09 g/mol
Now, we can substitute the values into the molarity formula:
Molarity = (2.55 mol/kg * 98.09 g/mol) / 1.151 g/ml
Converting the mol/kg to mol/L:
Molarity = (2.55 * 1000 mol/L * 98.09 g/mol) / 1.151 g/ml
Simplifying:
Molarity ≈ 213.53 mol/L
Therefore, the molar concentration of the H2SO4(aq) solution is approximately 213.53 mol/L.
Learn more about concentration here : brainly.com/question/3045247
#SPJ11
Select the correct statement that corresponds to the second law of thermodynamics. (a) The standard Gibbs free energy change, ΔG°, can be calculated from Gibbs free energies of formation, ΔGf° (b) The entropy of a perfect crystal of any pure substance approaches zero, as the temperature approaches absolute zero (0 K) (c) The entropy change for a reaction, DS°C, can be calculated from the standard molar entropies of the reactants and products (d) ΔE universe - ΔE system + ΔEsurroundings = 0 (e) In any spontaneous process, ΔS universe - ΔS system + ΔSsurroundings > 0
The correct statement (e) captures the fundamental principle of the second law of thermodynamics, emphasizing the tendency of entropy to increase in spontaneous processes, leading to a positive net entropy change of the universe.
The second law of thermodynamics is a fundamental principle that describes the behavior of energy and entropy in physical systems. It can be stated in various ways, but the correct statement corresponding to the second law is: In any spontaneous process, ΔS universe - ΔS system + ΔS surroundings > 0.
This statement captures the essence of the second law, which is that the entropy of an isolated system tends to increase over time. The entropy change of the universe (ΔS universe) is the net change in entropy of the system and its surroundings. For a spontaneous process, where the system undergoes a change without external intervention, the total entropy change of the universe must be greater than zero.
The entropy change of the system (ΔS system) and the entropy change of the surroundings (ΔS surroundings) may have opposite signs, but their magnitudes must be such that the net entropy change of the universe is positive. This reflects the irreversibility of natural processes, where entropy tends to increase and energy becomes more dispersed. The correct statement (e) captures the fundamental principle of the second law of thermodynamics, emphasizing the tendency of entropy to increase in spontaneous processes, leading to a positive net entropy change of the universe.
Learn more about thermodynamics here : brainly.com/question/1368306
#SPJ11
What is the difference between soil and sand
Explanation:
The terms ‘sand’ and ‘soil’ are often interchanged and used synonymously with one another. Many people consider them the same, but when scrutinized, they are quite different from each other. First and foremost, sand is a type of soil–so is silt, clay, peat, and loam. These types of soils are generated when rocks break up into their constituent parts and are acted upon by outside forces, such as wind, water, and natural salts. The broad definition of soil refers to the loose layer of earth that covers the surface of the planet. Sand, on the other hand, is defined as loose material that consists of rocks or mineral grains.
Answer:
soil is defined as the top layer of the land surface of the earth that is composed of disintegrated rock particles, humus, water, and air.
sand is defined as a loose material that consists of rocks or mineral grains.
Explanation:
help please. What type of reaction is this: barium nitrate --> barium oxide + nitrogen dioxide + oxygen
Answer:
Decomposition Reaction
Explanation:
Ba(NO₃)₂(s) ⇒ BaO(s) + N₂(g) + 3 O₂(g)
Barium nitrate decomposes into the chemical species that were used to create it.
Which element is oxidized in the reaction below?
Fe(CO)5 (l) + 2HI (g) →Fe(CO)4I2 (s) + CO (g) + H2(g)
The answer is Fe...but I'm messing up on setting up my oxidationcharges. Can someone clearly explain how to do this?
The element that is oxidized in the reaction Fe(CO)5 (l) + 2HI (g) → Fe(CO)4I2 (s) + CO (g) + H2(g) is iron (Fe). When determining the oxidation state of iron (Fe), we use the rule that the oxidation state of a monatomic ion is equal to its charge.
The oxidation state of Fe in Fe(CO)5 is zero. In Fe(CO)4I2, the oxidation state of Fe is +2. So, Fe is oxidized in the reaction.Balancing the redox reaction:Fe(CO)5 (l) + 2HI (g) → Fe(CO)4I2 (s) + CO (g) + H2(g)The oxidation half-reaction is:Fe(CO)5 (l) → Fe(CO)4I2 (s) + I- (aq)The reduction half-reaction is:2H+ (aq) + 2e- → H2 (g)By adding both half-reactions, the balanced redox reaction is:Fe(CO)5 (l) + 2HI (g) → Fe(CO)4I2 (s) + CO (g) + H2(g)The oxidation half-reaction shows that iron (Fe) has lost electrons, thereby being oxidized.
To know more about oxidized visit:
https://brainly.com/question/9830288
#SPJ11
.Consider the phase diagram below. If the dashed line at 1 atm of pressure is followed from 100 to 500 °C, what phase changes will occur (in order of increasing temperature)?
sublimation, followed by vaporization
sublimation, followed by deposition
melting, followed by vaporization
vaporization, followed by deposition
No phase change will occur under the conditions specified.
2. The phase changes that will occur from 100 to 500 °C at 1 atm of pressure are sublimation followed by deposition.
Based on the information provided, the correct answer is:
2. sublimation, followed by deposition
Following the dashed line at 1 atm of pressure on the phase diagram from 100 to 500 °C, the phase changes that will occur are sublimation, followed by deposition.
At lower temperatures, the substance will undergo sublimation, transitioning directly from the solid phase to the gas phase. As the temperature increases, the substance will exist as a gas.
However, at higher temperatures, as the temperature decreases again, the gas will undergo deposition, transitioning directly from the gas phase back to the solid phase.
Therefore, the substance will experience sublimation and deposition as the temperature changes within the specified range, without undergoing melting or vaporization.
Learn more about deposition here:
https://brainly.com/question/32008483
#SPJ4
T/F A reaction which is endothermic and has an overall increase in entropy is spontaneous only at high T
"A reaction which is endothermic and has an overall increase in entropy is spontaneous only at high T" is incorrect.
"A reaction which is endothermic and has an overall increase in entropy is spontaneous only at high T" is false.A spontaneous process occurs naturally and without any assistance. The rate of the process does not affect its spontaneity; instead, spontaneity is determined by the change in free energy that occurs during the reaction.A reaction is spontaneous if the Gibbs free energy of the reaction is negative (∆G < 0). Gibbs free energy is calculated using the equation: ∆G = ∆H - T∆S, where ∆H is the enthalpy change, T is the temperature, and ∆S is the entropy change of the reaction.A reaction that is endothermic (∆H > 0) and has an increase in entropy (∆S > 0) can be spontaneous at any temperature if the free energy change is negative. As a result, the given statement "A reaction which is endothermic and has an overall increase in entropy is spontaneous only at high T" is incorrect.
Learn more about endothermic here:
https://brainly.com/question/11902331
#SPJ11
please helpp: All things that are acidic will eventually produce ___ in an aqueous solution?
Answer:
Protons / H+ ions
Explanation:
The acids are compounds with a pH range between 1-7, while the base has a pH range of 7-14. Acids produce hydrogen ions or protons in the solution.
What is pH?The pH can be defined as the hydrogen ion concentration in the solution. The higher the proton concentration in the solution, the lower will be the pH.
The pH of 7 has an equal number of hydrogen and hydroxide ions contributing to the neutral pH. The alkaline pH is contributed by the hydroxide ion concentration.
The acids fall at the lower pH range with a high hydrogen ion concentration. Thus, acids produce hydrogen ions or protons in the aqueous solution.
Learn more about acids, here:
https://brainly.com/question/1515003
____________ are traits characteristics or features of an organism that are passed from parent to offspring
Answer:
Heredity, also called inheritance or biological inheritance, is the passing on of traits from parents to their offspring; either through asexual reproduction or sexual reproduction, the offspring cells or organisms acquire the genetic information of their parents.
Explanation:
Plss markk mee brainlistt
part a which substance is the oxidizing agent in the reaction below? fe(co)5 (l) 2hi (g) → fe(co)4i2 (s) co (g) h2(g)
Answer : The substance that acts as the oxidizing agent in the reaction:Fe(CO)5(l) + 2HI(g) → Fe(CO)4I2(s) + CO(g) + H2(g)is HI, or hydrogen iodide.
Explanation : In this reaction, HI acts as an oxidizing agent and Fe(CO)5(l) acts as a reducing agent.What is an oxidizing agent?An oxidizing agent is a substance that oxidizes or causes oxidation in another compound by transferring electrons to that compound. In the process, the oxidizing agent itself gets reduced.Oxidizing agents are chemicals that accept electrons from other substances. They are generally characterized by their ability to oxidize another substance, which is why they are sometimes referred to as electron acceptors.
Examples of oxidizing agents include hydrogen peroxide, potassium permanganate, and sodium hypochlorite.
Learn more about Oxidizing Agent here https://brainly.in/question/2205753
#SPJ11
. I am described as being conductive, malleable, shiny, and reactive with HCl. I am one of the most reactive elements. I turn black within seconds when I am exposed to air. If someone drops water on me, I will explode. When I do explode I send off characteristic purple-red (violet) flame. Who am I?
Answer:
Potassium
Explanation:
Most reactive metal in the reactivity series
The element in the question is referred to the alkali metal which is known as Potassium
Potassium is a highly reactive metal and reacts with Hydrochloric acid to
form a salt known as Potassium chloride and hydrogen gas.
Hcl + K ⇒ Kcl₍s₎ + H₂₍g₎
Potassium has a white color but when it reacts with water it explodes and
gives out a purple-red color as a result of the high excitation of electrons.
Read more on https://brainly.com/question/22993452
Which of the following usually occurs when a molecule dissolves in water?
a. The covalent bonds in the molecule break.
b. The covalent bonds in water break.
c. Covalent bonds between the molecule and water form.
d. Covalent bonds between several of the molecules form.
e. Hydrogen bonds form between the molecule and water.
Answer:
e. Hydrogen bonds form between the molecule and water.
Explanation:
When a molecule dissolves in water, it is typically because the molecule has polar or charged regions that can interact with the polar water molecules. Water is a highly polar molecule due to its bent shape and the presence of electronegative oxygen atoms. As a result, it forms hydrogen bonds with other water molecules and with other polar or charged substances.
When a molecule dissolves in water, the water molecules surround the individual molecules and interact with them through hydrogen bonding. The positively charged hydrogen atoms of water form hydrogen bonds with negatively charged regions of the dissolved molecule, such as oxygen or nitrogen atoms, or with partially negative regions due to uneven distribution of electron density. This interaction between the water molecules and the dissolved molecule is what allows the molecule to become dispersed and solvated in the water, forming a homogeneous mixture.
It's important to note that during the dissolution process, the covalent bonds within both the water molecules and the dissolved molecule generally remain intact. Dissolving in water does not typically involve breaking the covalent bonds within the molecule or the water molecule. Instead, it involves the formation of hydrogen bonds between the solvent (water) and solute (dissolved molecule).
given the following experimental data, find the rate law and the rate constant for the reaction nh4 no2 -> n2 2 h2o rate = k {nh4 ] ^ [no2]
The rate law for the reaction is `rate = k[NH4][NO2]` and the rate constant is `k = 0.004 M^-2 s^-1`.
The rate law for the reaction:
`NH4NO2 -> N2 + 2H2O` is `rate = k[NH4NO2]`.
Given that the reaction is first order with respect to both NH4 and NO2, it can be written as `rate = k[NH4][NO2]`. The rate constant k is calculated by plugging in the rate data from the experiment and solving for k.
Example of how to solve for the rate constant k:
Suppose the following rate data was obtained in an experiment where the concentration of NH4 and NO2 were varied:| Experiment | [NH4] (M) | [NO2] (M) | Rate (M/s) || 1 | 0.1 | 0.2 | 4.0x10^-4 || 2 | 0.2 | 0.2 | 8.0x10^-4 || 3 | 0.2 | 0.1 | 4.0x10^-4 |Substituting the given data into the rate law:
Experiment 1: 4.0x10^-4 = k(0.1 M)(0.2 M) = 0.002 k
Experiment 2: 8.0x10^-4 = k(0.2 M)(0.2 M) = 0.008 k
Experiment 3: 4.0x10^-4 = k(0.2 M)(0.1 M) = 0.002 k
Taking the average of the three k values:
k = (0.002 + 0.008 + 0.002)/3 = 0.004 M^-2 s^-1
Therefore, the rate law for the reaction is `rate = k[NH4][NO2]` and the rate constant is `k = 0.004 M^-2 s^-1`.
Learn more about rate law here:
https://brainly.com/question/30379408
#SPJ11
what are the two components of a solution
The population size of panda
bears increases dramatically
The
population will decrease because
Answer:
it will decrease because there will not be food for all of them and there is very little space for them now so if there is more they will start to fight
Explanation:
there is very little habitat left for panda bears so if there population increases the food and space with be filed
Hello! jamilialves888
I'm glad you asked my name is ✰Tobie✰
And I will help you understand why the population of ⚝pandas ⚝
is decreasing .
-Your answer :βy Tobie
≛So why are pandas going extinct?
One of the main cause is due to the destruction of their own habitat
Since china is a country that is constantly growing their own homes are slowly being destroyed Since their habitats are becoming destroyed it forces them to live in small unhabitable area .
≛This leads to another problem.....
If they are forced to live in a small area there will be less food...
Since there is a shortage of food that will leave the panda's to slowly starve to death since pandas only eat bamboo they could never be able to live anywhere else....Another reason panda's are going extinct is because they are being hunted for their fur.
ex·tinct
/ikˈstiNG(k)t/
_____________
It means that the species does not exist anymore and
are no longer in existence
Hope this helps!
-Tobie <3
ʕ •ᴥ•ʔ
choose the substance with the lowest surface tension. a) ch3oh b) ch3ch2ch2ch3 c) c6h14 d) h2o e) (ch3)2co
(CH₃)₂CO, also known as acetone, is a liquid at room temperature and has a surface tension of 23.8 mN/m.
Surface tension is defined as the tendency of the surface of a liquid to behave like an elastic sheet. The substances with the lowest surface tension are those that tend to spread out to a greater extent on the surface rather than to form a droplet.
Out of the given substances, the one with the lowest surface tension is (e) (CH₃)₂CO, which is acetone.
A) CH₃OH, also known as methanol, is a liquid at room temperature and has a surface tension of 22.6 mN/m.
B) CH₃CH₂CH₂CH₃, also known as butane, is a gas at room temperature and therefore does not have a surface tension value.
C) C₆H₁₄, also known as hexane, is a liquid at room temperature and has a surface tension of 18.4 mN/m.
D) H₂O, also known as water, is a liquid at room temperature and has a surface tension of 71.97 mN/m.
E) (CH₃)₂CO, also known as acetone, is a liquid at room temperature and has a surface tension of 23.8 mN/m.
To know more about acetone refer here: https://brainly.com/question/8854109#
#SPJ11
HELP PLEASE!!!!!!!!!!!!
Answer:
it is a practical question..ASAP
A canister of neon contains 4.8x1024 atoms of the gas. How many moles of neon are present in the canister?
Answer:
7.97 moles of neon are present in the canister.
Explanation:
Avogadro's constant or "Avogadro's number" is the number of constituent particles found in the amount of substance in one mole.
In other words, Avogadro's number is the number of particles that make up a substance (usually atoms or molecules) and that can be found in the amount of one mole of said substance. Its value is 6.023*10²³ particles per mole. Avogadro's number applies to any substance.
So, you can apply the following rule of three: if 6.023*10²³ atoms are present in 1 mole, 4.8*10²⁴ atoms are present in how many moles?
[tex]amount of moles=\frac{4.8*10^{24}atoms*1 mole }{6.023*10^{23}atoms}[/tex]
amount of moles= 7.97 moles
7.97 moles of neon are present in the canister.
If you were traveling from Earth to Neptune in a spaceship, what would
you see between Mars and Jupiter?
Imposters
little green men
Pluto
the asteroid belt
Answer:
I believe it would be Asteroid Belt
Explanation:
little green men and imposters seem very unlikely, and Pluto is definetely not between earth and Jupiter
Answer:
the asteroid belt
Explanation:
it orbits between mars and jupiter
is mixing colored light (like using this equipment in this lab) the same as mixing colored paint (as if you were mixing actual paint together)?
The mixing of colored light and colored paint follows different color models and produces different outcomes due to the properties of light and pigments.
Mixing colored light and mixing colored paint are not the same. When mixing colored light, such as using equipment in a lab, the primary colors are red, green, and blue (RGB). By combining different intensities of these colors, you can create various shades and hues. Mixing all three primary colors at full intensity produces white light.
On the other hand, mixing colored paint involves using the subtractive color model. The primary colors are cyan, magenta, and yellow (CMY). When you mix paints, the pigments absorb certain wavelengths of light, and the reflected light determines the perceived color. Mixing all three primary colors in paint results in a dark, muddy color, not white.
To know more about the Paint, here
https://brainly.com/question/30576747
#SPJ4
22 Determine the molar mass of an unknown gas that has a volume of 72.5 mL at a temperature of 68C, and a pressure of 0.980 atm and a mass of 0.207 g.
Answer:
81.5g/mol
Explanation:
Molar mass is the ratio between mass of a substance (In this case, 0.207g) and moles presents in this mass.
To solve this question we must find the moles of the gas in order to obtain the molar mass using:
PV = nRT
PV / RT = n
Where P is pressure = 0.980atm
V is volume in Liters = 0.0725L
R is gas constant = 0.082atmL/molK
T is absolute temperature = 68°C + 273.15 = 341.15K
0.980atm*0.0725L / 0.082atmL/molK*341.15K = n
2.54x10⁻³ moles = n
Thus, the molar mass of the gas is:
0.207g / 2.54x10⁻³ moles
81.5g/molWhat is the Molar Mass of MgO?
Answer:
The answer should be 40.3044 g/mol
A system gains 652 kJ of heat, resulting in a change in internal energy of the system equal to +241 kJ. How much work is done?
Answer:
-411 kj
Explanation:
We solve by using this formula
∆U = ∆Q + ∆W
This formula is the first law of thermodynamics
Change in internal energy U = +241
Heat gained by system Q = 652
Putting the value into the equation
+241 = 652 + W
Workdone = 241 - 652
Workdone = -411 kj
Since work done is negative it means that work was done by the system
0.39 moles of a gas fill a 5.0 l container that connects to a balloon through a closed valve. if the valve is opened an pressure remains the same, what would be the total number of moles of gas needed in order to inflate the balloon by 1.5
Answer: 5.39
Explanation: you are adding the balloon's volume and the container's volume
What problems may global warming cause?
Answer:
Global warming stresses ecosystems through temperature rises, water shortages, increased fire threats, drought, weed and pest invasions, intense storm damage and salt invasion, just to name a few.
Explanation:
Global warming stresses ecosystems through temperature rises, water shortages, increased fire threats, drought, weed and pest invasions, intense storm damage and salt invasion, just to name a few.
calculate the molar solubility of baso4 in a 0.250 m solution of nahso4? ka for hso4- = 1.2 x 10-2.
The required answer for the molar solubility of BaSO4 in a 0.250 M solution of NaHSO4 is 1.05 × 10-5 M.
Explanation: Molar solubility is defined as the number of moles of a solute that can dissolve per liter of solution before the solution becomes saturated. It can be determined by calculating the equilibrium concentration of the solute using the solubility product expression for the given ionic compound, BaSO4. We are given the concentration of NaHSO4 and the acid dissociation constant for HSO4-.
The balanced chemical equation is:BaSO4(s) ↔ Ba2+(aq) + SO42-(aq)We are assuming the solution is dilute and that the ionic strength is low. Therefore, we can simplify the expression for the solubility product to:Ksp = [Ba2+][SO42-]The expression for the acid dissociation constant of HSO4- is:Ka = [H+][SO42-]/[HSO4-]
The first step is to calculate the concentration of HSO4-. We can use the equilibrium expression for the acid dissociation reaction to solve for [HSO4-]:Ka = [H+][SO42-]/[HSO4-]Rearranging the expression and solving for [HSO4-]:[HSO4-] = [H+][SO42-]/Ka[HSO4-] = (0.250 × x)/(1.2 × 10-2)[HSO4-] = 20.8333 × xThe molar solubility of BaSO4 in a 0.250 M solution of NaHSO4 is x. At equilibrium, the concentration of Ba2+ and SO42- are both x. Using the solubility product expression:Ksp = [Ba2+][SO42-]Ksp = x2x = sqrt(Ksp)[BaSO4] = x = sqrt(Ksp) = sqrt(1.1 × 10-10) = 1.05 × 10-5 MTherefore, the molar solubility of BaSO4 in a 0.250 M solution of NaHSO4 is 1.05 × 10-5 M.
Learn more about Molar Solubility here https://brainly.in/question/18823163
#SPJ11
Identify which redox reactions occur spontaneously in the forward direction.
Check all that apply.
2Ag+(aq)+Ni(s)→2Ag(s)+Ni2+(aq)
2Cr(s)+3Pb2+(aq)→2Cr3+(aq)+3Pb(s)
Ca2+(aq)+Zn(s)→Ca(s)+Zn2+(aq)
Sn(s)+Mn2+(aq)→Sn2+(aq)+Mn(s)
The redox reactions that occur spontaneously in the forward direction are:
2Ag+(aq) + Ni(s) → 2Ag(s) + Ni2+(aq)
Ca2+(aq) + Zn(s) → Ca(s) + Zn2+(aq)
Among the given redox reactions, the ones that occur spontaneously in the forward direction are: 2Ag+(aq) + Ni(s) → 2Ag(s) + Ni2+(aq) and Ca2+(aq) + Zn(s) → Ca(s) + Zn2+(aq). These reactions occur because the reduction potentials of Ag+ and Ca2+ are higher than those of Ni2+ and Zn2+, respectively. As a result, Ag+ and Ca2+ are reduced, while Ni and Zn are oxidized. The other two reactions, 2Cr(s) + 3Pb2+(aq) → 2Cr3+(aq) + 3Pb(s) and Sn(s) + Mn2+(aq) → Sn2+(aq) + Mn(s), do not occur spontaneously in the forward direction due to the lower reduction potentials of the species being reduced.
Learn more about redox reaction here : brainly.com/question/28300253
#SPJ11
place the following in order of increasing standard molar entropy. n2o4 (g) no (g) no2 (g)
The standard molar entropy of no₂ is 240.0 J/(mol.K).Therefore, the order of increasing standard molar entropy of the given gases is n₂o₄ (g) < no (g) < no₂ (g).
Entropy is the measure of disorder in a system. It is a thermodynamic property that depends on the degree of randomness in the molecules of a substance. The unit of entropy is Joules per Kelvin. In general, the entropy of a substance increases with an increase in temperature.
This is because at higher temperatures, the molecules of a substance have more kinetic energy and can move more freely, leading to an increase in the number of possible arrangements of molecules, which increases entropy.
Increasing Standard Molar Entropy Order n₂o₄ (g) < no (g) < no₂ (g)The standard molar entropy (S°) is the entropy of one mole of a substance at standard temperature and pressure (STP). In the order of increasing standard molar entropy, the gases listed are as follows: n₂o₄ (g) has the least entropy because it is a relatively heavy and rigid molecule. It has fewer possible arrangements of molecules, which results in a lower entropy.
The standard molar entropy of n₂o₄ is 304.3 J/(mol.K).no (g) has more entropy than n₂o₄ because it is a lighter molecule that is more mobile. It has more possible arrangements of molecules, leading to higher entropy.
The standard molar entropy of no is 210.6 J/(mol.K).no₂ (g) has the highest entropy because it is the lightest and most mobile molecule of the three gases. It has the most possible arrangements of molecules, leading to the highest entropy. The standard molar entropy of no₂ is 240.0 J/(mol.K).
Therefore, the order of increasing standard molar entropy of the given gases is n₂o₄ (g) < no (g) < no₂ (g).
To know more about standard molar entropy refer here: https://brainly.com/question/32252456#
#SPJ11
In the following reaction, identify the element getting oxidized and element getting reduced: Ba(s) + 2H+ (aq) → Ba2+ (aq) + H2(g) Ba getting oxidized/H getting reduced Ba2 getting oxidized / Ba2+ getting reduced H getting oxidized/H* getting reduced H getting oxidized / Ba getting reduced NO
The correct answer is:Ba getting oxidized/H getting reduced.
Explanation: In the following reaction, Ba is getting oxidized and H is getting reduced. Given reaction is: Ba(s) + 2H+ (aq) → Ba2+ (aq) + H2(g)In the given redox reaction, the Ba is being oxidized to Ba2+. Its oxidation state is increasing from 0 to +2. This means that Ba is losing electrons and getting oxidized. Hence, Ba is the element that is getting oxidized in the given reaction.The H+ is getting reduced to H2. Its oxidation state is decreasing from +1 to 0. This means that H is gaining electrons and getting reduced. Hence, H is the element that is getting reduced in the given reaction.Therefore, the correct option is:Ba getting oxidized/H getting reduced.
Learn more about the element getting oxidized and element getting reduced here https://brainly.in/question/33572786
#SPJ11
27 which statement about members of a homologous series is true ? a) they are all constitutional isomers. b) they are always hydrocarbons. c) each differs from its nearest neighbors by 14 amu. d) they may also be classified as tautomers.
The statement about members of a homologous series that is true is that they differ from their nearest neighbors by 14 amu (c).
A homologous series is a group of compounds with a similar general formula, chemical properties, and a constant increment in molecular structure. As a result, each member varies from the previous by a constant unit, which is often a CH2 group.Each member of the homologous series is classified as either a tautomer or a constitutional isomer. Constitutional isomers, also known as structural isomers, are compounds with the same molecular formula but different structural arrangements. Isomers of tautomers are structural isomers that interconvert by a simple chemical reaction. As a result, the formula and composition of tautomers are the same, but they differ in the distribution of their valence electrons and bonding patterns.Members of a homologous series may or may not be hydrocarbons, and they are not always constitutional isomers. Therefore, statement (a) and statement (b) are both incorrect. Statement (d) is also incorrect because tautomers cannot be classified as members of a homologous series. However, statement (c) is correct because members of a homologous series differ from their nearest neighbors by a constant increment in molecular structure, which is usually 14 amu. Therefore, the correct answer is C.
To know more about homologous series visit:
https://brainly.com/question/30842881
#SPJ11
Se midió el pH de una muestra del agua de lluvia en la ciudad de México, y se obtuvo un valor de 3.5 Calcula la [H+] en dicha muestra.
Answer:
[tex][H^+]=3.16x10^{-4}M[/tex]
Explanation:
¡Hola!
En este caso, dado que el pH de una solución se entiende como el potencial de los iones hidrógeno en la misma, es posible recordar la ecuación que se usa para calcularlo:
[tex]pH=-log([H^+])[/tex]
De este modo, al conocer el pH, se resuelve para la concentración de iones hidrógeno como se muestra a continuación:
[tex][H^+]=10^{-pH}[/tex]
Así, reemplazamos el pH para obtener:
[tex][H^+]=10^{-3.5}=3.16x10^{-4}M[/tex]
¡Saludos!