The original number of students in the nursing school class was approximately 40 using the linear equation x - 0.10x = 36.
To find the original number of students in the nursing school class, we can use the dropout rate of 10% and the number of graduated students.
Calculate the dropout rate: The dropout rate is given as 10% or 0.10, which means 10% of the original class did not graduate.
Determine the number of graduated students: The problem states that 36 students graduated from the class.
Calculate the original number of students: Let's denote the original number of students as "x." Since the dropout rate is 10%, the number of students who dropped out can be calculated as 0.10 × x. Therefore, the equation becomes:
x - 0.10x = 36
Simplifying the equation, we have:
0.90x = 36
Solve for x: To find the value of x, divide both sides of the equation by 0.90:
x = 36 / 0.90
x ≈ 40
Learn more about linear equations at
https://brainly.com/question/29111179
#SPJ4
The question is -
A nursing school class graduated 36 students. If the class suffered a dropout rate of 10%, what was the original number of students in the class?
Consider a single server queue with a Poisson arrival process at rate \, and exponentially distributed service times with rate µ. All interarrival times and service times are independent of each other. This is similar to the standard M|M|1 queue, but in this queue, as the queue size increases, arrivals are more and more likely to decide not to join it. If an arrival finds n people already in the queue ahead of them (including anyone being served), then they join with probability 1/(n+1). Let N(t) be the number in the queue at time t. (c) Find the equilibrium distribution for this queue, when it exists. (d) What are conditions on A and under which the equilibrium distribution exists?
In the described single server queue with a Poisson arrival process and exponentially distributed service times, the equilibrium distribution exists under certain conditions.
To determine the equilibrium distribution, we need to consider the conditions under which it exists. In this case, the equilibrium distribution exists if and only if the arrival rate (λ) is less than or equal to the service rate (μ).
Mathematically, λ ≤ μ. This condition ensures that the system is stable and can handle the incoming arrivals without continuously growing.
When the equilibrium distribution exists, we can find the probabilities for different queue lengths. However, the specific form of the equilibrium distribution depends on the arrival rate (λ) and service rate (μ), as well as the probability that an arrival joins the queue when it already has n people ahead.
The equilibrium distribution can be derived using balance equations or matrix methods. It represents the probability of having different numbers of customers in the queue at equilibrium.
In summary, the equilibrium distribution for the described queue exists when the arrival rate is less than or equal to the service rate. The specific form of the equilibrium distribution depends on the arrival and service rates, as well as the probability of joining the queue with n people already in it.
Learn more about probability here:
https://brainly.com/question/31828911
#SPJ11
abby is comparing monthly phone charges from two companies. phenix charges $30 plus $.5 per minute. Nuphone charges $40 plus $.10 per minute. in how many minutes will the total be the same
Answer:
In 25 minutes, the monthly phone charges of both companies will be the same.
Step-by-step explanation:
If we allow m to represent the number of minutes, we can create two equations for C, the total cost of phone charges from both companies:
Phoenix equation: C = 0.5m + 30
Nuphone equation: C - 0.10m + 40
Now, we can set the two equations equal to each other. Solving for m will show us how many minutes must Abby use for the total cost at both companies to be the same:
0.5m + 30 = 0.10m + 40
Step 1: Subtract 30 from both sides:
(0.5m + 30 = 0.10m + 40) - 30
0.5m = 0.10m + 10
Step 2: Subtract 0.10m from both sides:
(0.5m = 0.10m + 10) - 0.10m
0.4m = 10
Step 3: Divide both sides by 0.4 to solve for m (the number of minutes it takes for the total cost of both companies to be the same)
(0.4m = 10) / 0.4
m = 25
Thus, Abby would need to use 25 minutes for the total cost at both companies to be the same.
Optional Step 4: Check the validity of the answer by plugging in 25 for m in both equations and seeing if we get the same answer:
Checking m = 25 with Phoenix equation:
C = 0.5(25) + 30
C = 12.5 + 30
C = 42.5
Checking m = 25 with Nuphone equation:
C = 0.10(25) + 40
C = 2.5 + 40
C = 42.5
Thus, m = 25 is the correct answer.
The student council at a large high school is wondering if Juniors or Seniors are more likely to attend Prom. They take a random sample of 40 Juniors and find that 18 are planning on attending Prom. They select a random sample of 38 Seniors and 19 are planning on attending. Do the data provide convincing evidence that a higher proportion of Seniors are going to prom than Juniors? Use a 5% significance level. What is the p-value? Round to two decimal places. O 0.33 0.21 O 0.56
The data provide convincing evidence that a higher proportion of Seniors are attending prom compared to Juniors. The p-value is 0.33.
To determine if a higher proportion of Seniors are attending prom compared to Juniors, we can conduct a hypothesis test using the given data. Let's set up the hypotheses:
Null hypothesis (H0): The proportion of Juniors attending prom is equal to or higher than the proportion of Seniors attending prom.
Alternative hypothesis (Ha): The proportion of Seniors attending prom is higher than the proportion of Juniors attending prom.
To test this, we can use a two-sample proportion z-test. First, let's calculate the proportions of Juniors and Seniors attending prom:
Proportion of Juniors attending prom: 18/40 = 0.45
Proportion of Seniors attending prom: 19/38 = 0.50
Next, we calculate the standard error of the difference in proportions:
SE = [tex]\sqrt{[(p1 * (1 - p1) / n1) + (p2 * (1 - p2) / n2)]}[/tex]
SE = [tex]\sqrt{[(0.45 * 0.55 / 40) + (0.50 * 0.50 / 38)]}[/tex]
SE ≈ 0.090
We can now calculate the test statistic (z-score):
z = (p1 - p2) / SE
z = (0.45 - 0.50) / 0.090
z ≈ -0.56
Looking up the z-score in the z-table, we find that the p-value associated with -0.56 is approximately 0.33. Since the p-value (0.33) is greater than the significance level of 0.05, we fail to reject the null hypothesis. Therefore, we do not have convincing evidence to conclude that a higher proportion of Seniors are attending prom compared to Juniors.
To learn more about null hypothesis, refer:-
https://brainly.com/question/28920252
#SPJ11
Solve the dual problem associated to the following problem Minimize P=2x+9y
s. t. 3x + 5y ≥ 3
9x + 5y ≥ 8
x, y ≥ 0
The dual of the linear problem is
Max P = 3x + 8y
Subject to:
3x + 9y + a₁ ≥ 2
5x + 5y + a₂ ≥ 9
a₁ + a₂ ≥ 0
How to calculate the dual of the linear problemFrom the question, we have the following parameters that can be used in our computation:
Max P = 2x + 9y
Subject to:
3x + 5y ≥ 3
9x + 5y ≥ 8
x, y ≥ 0
Convert to equations using additional variables, we have
Max P = 2x + 9y
Subject to:
3x + 5y + s₁ = 3
9x + 5y + s₂ = 8
x, y ≥ 0
Take the inverse of the expressions using 3 and 8 as the objective function
So, we have
Max P = 3x + 8y
Subject to:
3x + 9y + a₁ ≥ 2
5x + 5y + a₂ ≥ 9
a₁ + a₂ ≥ 0
Read more about linear programming at
brainly.com/question/14309521
#SPJ4
The following questions relate to the below information.
XY2 → X + Y2
The equation above represents the decomposition of a compound XY2. The diagram below shows two reaction profiles (path one and path two) for the decomposition of XY2.
The diagram shows two reaction profiles for the decomposition of XY2, with path one representing a single-step decomposition and path two representing a two-step decomposition process.
In path one, XY2 directly decomposes into X and Y2 in a single step. This means that the decomposition reaction occurs in a single transition state without any intermediate species.
In path two, XY2 first undergoes an intermediate step where it forms an intermediate species, XY. Then, in the second step, the intermediate species XY further decomposes into X and Y. This two-step process involves two transition states.
The choice between path one and path two depends on the reaction conditions and the energy requirements for each pathway. The reaction profile diagrams provide information about the energy changes during the decomposition process.
By analyzing the reaction profiles, one can determine the activation energy required for each step and the overall energy change during the decomposition of XY2. This information is crucial for understanding the reaction kinetics and the thermodynamics of the decomposition process.
Learn more about diagrams here:
https://brainly.com/question/30620962
#SPJ11
(f) Another river is a smaller but very important source of water flowing out of the park from a different drainage. Ten recent years of annual water flow data are shown below (units 10^8 cubic meters).
3.83 3.81 4.01 4.84 5.81 5.50 4.31 5.81 4.31 4.57
Although smaller, is the new river more reliable? Use the coefficient of variation to make an estimate. (Round your answers to two decimal place.)
original river's coefficient of variation ____
smaller river's coefficient of variation ____
What do you conclude?
A. The smaller river is more consistent.
B. Neither river is more consistent.
C. The original river is more consistent.
(g) Based on the data, would it be safe to allocate at least 26 units of the orginal river water each year for agricultural and domestic use? Why or why not?
A. No, the median is less than 26 which means more than half the river flows are below 26.
B. No, Q3 is less than 26 which means more than three quarters of the river flows are below 26.
C. No, since 26 is an upper outlier it will be very rare to have a flow at or above 26.
D. Yes, since 26 is an lower outlier it will be very rare to have a flow below 26.
E. Yes, Q1 is greater than 26 which means over three quarters of the river flows are at or above 26.
The correct answer is option A: No, the median is less than 26 which means more than half the river flows are below 26 based on coefficient of variation.
The smaller river's coefficient of variation can be calculated as shown below;
Small river's mean=4.5
Standard deviation
=√( (3.83-4.5)²+(3.81-4.5)²+(4.01-4.5)²+(4.84-4.5)²+(5.81-4.5)²+(5.50-4.5)²+(4.31-4.5)²+(5.81-4.5)²+(4.31-4.5)²+(4.57-4.5)² )/(10-1)
≈0.67
Coefficient of variation= (0.67/4.5)*100
= 14.89%
Original river's coefficient of variation can be calculated as shown below:
Original river's mean=16.5
Standard deviation
=√( (18.3-16.5)²+(17.5-16.5)²+(14.9-16.5)²+(21.3-16.5)²+(15.3-16.5)²+(13.1-16.5)²+(19.6-16.5)²+(14.7-16.5)²+(15.6-16.5)²+(14.6-16.5)² )/(10-1)
≈2.21
Coefficient of variation= (2.21/16.5)*100
= 13.39%
Hence the coefficient of variation for the smaller river is greater than that of the original river.
Thus, we can conclude that the original river is more consistent.
Safe allocation of water 26 is greater than the Q1 of the original river, which implies that the lower 25% of the river flows are less than 26 units.
Therefore, it is not safe to allocate at least 26 units of the original river water each year for agricultural and domestic use.
To know more about median, visit:
https://brainly.com/question/300591
#SPJ11
what is the recursive rule for the sequence? −22.7, −18.4, −14.1, −9.8, −5.5, ...
The recursive rule for the sequence −22.7, −18.4, −14.1, −9.8, −5.5, ... is:
a(n) = a(n - 1) + 4.3
where a(n) is the nth term of the sequence.
The recursive rule for a sequence tells us how to find the next term in the sequence, given the previous terms. In this case, the recursive rule tells us that to find the next term in the sequence, we add 4.3 to the previous term.
For example, the second term in the sequence is −18.4, which is found by adding 4.3 to the first term, −22.7. The third term in the sequence is −14.1, which is found by adding 4.3 to the second term, −18.4. And so on.
The recursive rule can also be used to prove that the sequence is arithmetic.
An arithmetic sequence is a sequence of numbers in which the difference between any two consecutive terms is constant. In this case, the difference between any two consecutive terms is 4.3, so the sequence is arithmetic.
Learn more about recursive rule here:
brainly.com/question/19215537
#SPJ11
A pair of fair dice is tossed. Events A and B are defined as follows.
A: {The sum of the numbers on the dice is 3}
B: {At least one of the dice shows a 2}
Identify the sample points in the event A ∩ B.
The sample point in the event [tex]A \cap B[/tex] is {(2, 1)}.
To identify the sample points in an event [tex]A \cap B[/tex], we need to find the outcomes where both events A and B occur simultaneously.
Event A: The sum of the numbers on the dice is 3. The possible outcomes that satisfy this event are:
{(1, 2), (2, 1)}
Event B: At least one of the dice shows a 2. The possible outcomes that satisfy this event are:
{(2, 1), (2, 2), (2, 3), (2, 4), (2, 5), (2, 6), (1, 2), (3, 2), (4, 2), (5, 2), (6, 2)}
To find the sample points in the intersection of events [tex]A \cap B[/tex], we need to identify the outcomes that are common to both events. In this case, the common outcome is (2, 1).
Therefore, the sample point in the event [tex]A \cap B[/tex] is {(2, 1)}.
Learn more about possible outcomes at:
https://brainly.com/question/30241901
#SPJ4
Evaluate each expression using the values given in the table. 1 х f(x) g(x) -3 -2 -4 -3 3 - 1 -2. 0 0 -1 1 ON a. (fog)(1) d.(gof)(0) b. (fog)(-1) e. (gog)(-2) c. (gof)(-1) f. (fof)(-1)
Evaluating each expression using the values given in the table :
a. (f ∘ g)(1) = -2
b. (f ∘ g)(-1) = 3
c. (g ∘ f)(-1) = 0
d. (g ∘ f)(0) = -1
e. (g ∘ g)(-2) = 1
f. (f ∘ f)(-1) = 3
Here is the explanation :
To evaluate each expression, we need to substitute the given values into the functions f(x) and g(x) and perform the indicated composition.
a. (f ∘ g)(1):
First, find g(1) = 0.
Then, substitute g(1) into f: f(g(1)) = f(0) = -2.
b. (f ∘ g)(-1):
First, find g(-1) = 1.
Then, substitute g(-1) into f: f(g(-1)) = f(1) = 3.
c. (g ∘ f)(-1):
First, find f(-1) = 1.
Then, substitute f(-1) into g: g(f(-1)) = g(1) = 0.
d. (g ∘ f)(0):
First, find f(0) = -2.
Then, substitute f(0) into g: g(f(0)) = g(-2) = -1.
e. (g ∘ g)(-2):
First, find g(-2) = -1.
Then, substitute g(-2) into g: g(g(-2)) = g(-1) = 1.
f. (f ∘ f)(-1):
First, find f(-1) = 1.
Then, substitute f(-1) into f: f(f(-1)) = f(1) = 3.
To know more about the indicated composition refer here :
https://brainly.com/question/29177072#
#SPJ11
The average test score is a 65 with a standard deviation of 12. a. If Dan scored a 83, what would his 2-score be? b. This means Dan scored better than of his classmates. (enter a percentage, do not round)
a. Dan's z-score is 1.5.
b. Dan scored better than approximately 6.68% of his classmates.
To find Dan's z-score, we'll use the formula:
z = (x - μ) / σ
Where:
x = Dan's score (83)
μ = mean (65)
σ = standard deviation (12)
a. To find Dan's z-score:
z = (83 - 65) / 12
z = 1.5
Therefore, Dan's z-score is 1.5.
b. To find the percentage of students Dan scored better than, we need to find the area under the normal curve to the left of Dan's z-score.
From the z-score table, we can see that the area to the left of z = 1.5 is approximately 0.9332.
To find the percentage of students Dan scored better than, we subtract this value from 1 and multiply by 100:
Percentage = (1 - 0.9332) * 100
Percentage = 6.68
Therefore, Dan scored better than approximately 6.68% of his classmates.
To know more about z-score here
https://brainly.com/question/30186190
#SPJ4
Write the product as a sum: __________
10 sin (30c)sin (22c) = __________
The product 10 sin(30c)sin(22c) can be expressed as a sum using the trigonometric identity for the product of two sines: sin(A)sin(B) = 0.5[cos(A-B) - cos(A+B)]. Therefore, the expression simplifies to 5[cos(30c - 22c) - cos(30c + 22c)].
To express the product 10 sin(30c)sin(22c) as a sum, we can utilize the trigonometric identity sin(A)sin(B) = 0.5[cos(A-B) - cos(A+B)]. By applying this identity, we have:
10 sin(30c)sin(22c) = 10 * 0.5[cos(30c-22c) - cos(30c+22c)]
= 5[cos(8c) - cos(52c)]
Therefore, the product can be expressed as the sum 5[cos(8c) - cos(52c)]. We use the trigonometric identity to transform the product of sines into a difference of cosines. By simplifying the expression, we achieve a sum representation that involves the difference of two cosine functions evaluated at different angles.
This sum representation provides a way to rewrite the given product in a more concise form, making it easier to manipulate or analyze further if needed.
Learn more about trigonometry here:
https://brainly.com/question/11016599
#SPJ11
in the coordinate plane, what is the length of the line segment that connects points at (4, −1) and (9, 7)? enter your answer in the box. round to the nearest hundredth.
The length of the line segment is approximately 9.43 units.
To find the length of the line segment connecting two points in the coordinate plane, we can use the distance formula. The distance formula calculates the distance between two points (x₁, y₁) and (x₂, y₂) as follows:
Distance = √((x₂ - x₁)² + (y₂ - y₁)²)
In this case, the coordinates of the two points are (4, -1) and (9, 7). Let's substitute these values into the distance formula:
Distance = √((9 - 4)² + (7 - (-1))²)
= √(5² + 8²)
= √(25 + 64)
= √89
≈ 9.43
Rounding to the nearest hundredth, the length of the line segment is approximately 9.43.
To justify the solution, we can visually represent the line segment connecting the two points (4, -1) and (9, 7) on a coordinate plane. By plotting these points and drawing a straight line between them, we can observe that the line segment's length corresponds to the distance between the points. We can use a ruler or any measuring tool to measure this distance on the graph, and it will match the calculated value of approximately 9.43.
Learn more about coordinate plane here:
https://brainly.com/question/14462788
#SPJ11
If(-4,2) is a point on the graph of a one-to-one function f, which of the following points is on the graph off"12 Choose the correct answer below. a. (-4,-2) b. (4.-2) c. (-2.4) d. (2, 4)
Only option d. (2, 4) matches the point on the graph of f^(-1) corresponding to the y-value of -12.
Given that (-4, 2) is a point on the graph of a one-to-one function f, we can determine the point on the graph of f^(-1) (the inverse function of f) corresponding to the y-value of -12.
To find this point, we need to swap the x and y coordinates of the given point (-4, 2) and consider it as the new point (2, -4).
Now, we need to determine which of the listed points is on the graph of f^(-1) with a y-value of -12.
Let's evaluate each of the listed points:
a. (-4, -2): Swapping the x and y coordinates gives (-2, -4), which does not match the given point (2, -4).
b. (4, -2): Swapping the x and y coordinates gives (-2, 4), which does not match the given point (2, -4).
c. (-2, 4): Swapping the x and y coordinates gives (4, -2), which does not match the given point (2, -4).
d. (2, 4): Swapping the x and y coordinates gives (4, 2), which matches the given point (2, -4).
Among the given options, only option d. (2, 4) matches the point on the graph of f^(-1) corresponding to the y-value of -12.
Therefore, the correct answer is d. (2, 4).
Learn more about graph here
https://brainly.com/question/19040584
#SPJ11
Given f(x)=11^x, what is f^-1(x)?
Answer:
The first one
[tex] log_{11} \: (x)[/tex]
Step-by-step explanation:
f(x) = 11^x
Here are the steps to find the inverse of a function:
1. Let f(x)=y
2. Make x the subject of formula.
3. Replace y by x.
[tex]11 {}^{x} = y \\ \: log(11 {}^{x} ) = log(y) \\ x log(11) = log(y) \\ x = \frac{ log(y) }{ log(11) } = log_{11}(y) \\ f {}^{ - 1} (x) = log_{11}(x) [/tex]
Show that for every metric space (X, d), every x e X and every e > 0 we have: (a) CI(B.(x)) {ye X: d(x,y)
We have shown that for any metric space (X, d), any point x ∈ X, and any positive ε > 0, the open ball B(x, ε) is entirely contained within the closed ball CI(B(x)).
To prove the statement, let's consider a metric space (X, d), an arbitrary point x ∈ X, and a positive real number ε > 0. We want to show that the open ball B(x) centered at x with radius ε, denoted as B(x, ε), is contained within the closed ball CI(B(x)).
First, let y be any point in the open ball B(x, ε). This means that d(x, y) < ε, indicating that the distance between x and y is less than ε. By definition, the closed ball CI(B(x)) includes all points y in X such that d(x, y) ≤ ε. Since d(x, y) < ε implies d(x, y) ≤ ε, we can conclude that every point in the open ball B(x, ε) is also in the closed ball CI(B(x)).
Therefore, we have shown that for any metric space (X, d), any point x ∈ X, and any positive ε > 0, the open ball B(x, ε) is entirely contained within the closed ball CI(B(x)).
Know more about Radius here:
https://brainly.com/question/13449316
#SPJ11
For the upcoming 2024 presidential election, Donald Trump represents the republican party and Joe Biden represents the democratic party. A third candidate Ashley Tisdale represents the independent party. The probabilities that a registered voter voters for Trump, Biden and Tisdale are Pp_1, p_2 and p_3, respectively. Out of a random sample of 10,000 voters, it is found that 4800 voted for Trump, 4400 voted for Biden and 800 voted for Tisdale.
(a) Find an approximate 98% lower confidence interval for p_1 – p_2.
(b) Based on (a), is there any convincing evidence that Trump will win the election?
HINT: You have to estimate the variance of p_1 – p_2 using the given data and then apply the bivariate version of the Central Limit The- orem. You must understand the difference between this experiment and rolling two dice independently.
The approximate 98% lower confidence interval for p₁ - p₂ is (0.003328, 0.076672).
Based on the value of p₁ - p₂, there is convincing evidence that Trump will win the election.
What is the confidence interval?(a) To find an approximate 98% lower confidence interval for p₁ - p₂, we can use the following formula:
CI = (p₁ - p₂) ± z * √((p₁ * (1 - p₁) / n₁) + (p₂ * (1 - p₂) / n₂))
where:
p₁ and p₂ are the sample proportions (p₁ = 4800/10000, p₂ = 4400/10000),
n₁ and n₂ are the respective sample sizes (n₁ = 10000, n₂ = 10000),
z is the z-score (98% confidence level corresponds to a z-score of 2.33).
Substituting the values into the formula:
CI = (0.48 - 0.44) ± 2.33 * √((0.48 * 0.52 / 10000) + (0.44 * 0.56 / 10000))
CI = 0.04 ± 2.33 * √(0.0001248 + 0.0001232)
CI = 0.04 ± 2.33 * √(0.000248)
CI = 0.04 ± 2.33 * 0.0157496
CI ≈ 0.04 ± 0.036672
CI ≈ (0.003328, 0.076672)
(b) The lower bound of the interval is greater than zero (0.003328 > 0), therefore, based on the confidence interval, there is convincing evidence that the proportion of voters supporting Trump (p₁) is higher than the proportion of voters supporting Biden (p₂).
Learn more about confidence intervals at: https://brainly.com/question/20309162
#SPJ4
Solve the initial value problem y' = (x + y − 3)2 with y(0) = 0. = a.
If the 2 meant *2 then:
Expand and move y to left side to get
y’-2*y=2*x-6.
The homog eqn is yh’-2*yh=0 so yh=k1*exp(2*x) by trying y=exp(m*x) or separating.
Assume yp=a*x+b so yp’=a then
a-2*(a*x+b)=2*x-6 or
-2*a*x+a-2*b=2*x-6 so
-2*a=2 so a=-1 and a-2*b=-6 so
-1–2*b=-6 so -2*b=-5 and b=5/2 so we have yp=-x+5/2 which yields the general soln y=yh+yp=k1*exp(2*x)-x+5/2.
For y(0)=0, we see k1+5/2=0 so k1=-5/2 and the solution is
y=5*(1-exp(2*x))/2-x.
This heads exponentially to minf for larger x.
If the 2 is ^2 then
y’=(x+y-3)^2 and let y=v-x+3 so y’=v’-1 and y’=(x+y-3)^2 becomes v’-1=v^2 or
v’=1+v^2 so separate as dv/(1+v^2)=dx and integrate to get
atan(v)=x+k2 so v=tan(x+k2)=y+x-3 so y=tan(x+k2)-x+3 and y(0)=0 becomes
0=tan(k2)+3 and tan(k2)=-3 so k2=-atan(3) which makes y=tan(x-atan(3))-x+3.
This has singularities for x=atan(3)+%pi*(2*n+1)/2 for integer
The lifetime of a certain bulb is exponential with a mean of 3 years. If we take a random sample of 10 such bulbs, what is the expected number of bulbs which will last at least 1 year? What is the probability that exactly 4 of the 10 bulbs will last at least 1 year?
The probability that exactly 4 of the 10 bulbs will last at least 1 year ≈ 0.2405 or 24.05%.
The lifetime of a certain bulb is exponentially distributed with a mean of 3 years. This means that the rate parameter (λ) of the exponential distribution is equal to 1/3.
To find the expected number of bulbs that will last at least 1 year, we can use the exponential distribution's cumulative distribution function (CDF).
The CDF of an exponential distribution is given by:
CDF(x) = 1 - exp(-λx)
To find the probability that a bulb will last at least 1 year, we calculate the CDF at x = 1:
CDF(1) = 1 - exp(-1/3 * 1) = 1 - exp(-1/3) ≈ 0.2835
Therefore, the expected number of bulbs that will last at least 1 year in a sample of 10 bulbs is:
Expected number = 10 * CDF(1) = 10 * 0.2835 = 2.835 bulbs
To find the probability that exactly 4 of the 10 bulbs will last at least 1 year, we can use the binomial distribution.
The probability mass function (PMF) of the binomial distribution is given by:
PMF(k) = (n choose k) * p^k * (1-p)^(n-k)
where n is the number of trials, k is the number of successful trials, and p is the probability of success in a single trial.
In this case, n = 10, k = 4, and p = CDF(1) ≈ 0.2835.
Plugging these values into the PMF formula, we get:
PMF(4) = (10 choose 4) * (0.2835)^4 * (1 - 0.2835)^(10-4)
Using a binomial coefficient calculator, we find:
(10 choose 4) = 210
Calculating the probability:
PMF(4) = 210 * (0.2835)^4 * (1 - 0.2835)^6 ≈ 0.2405
To know more about probability refer here:
https://brainly.com/question/14210034#
#SPJ11
Pls help ASAP! Show work
Option D is correct, the solid is a rectangular prism with a base length of 8.
The plane region is revolved completely about the x axis to sweep out a solid of revolution.
From the given figure we can tell that the solid shape obtained is a rectangular prism.
The rectangular prism has a base length of 8 units.
We have to find the volume:
volume = length × width × height
=8×5×5
=200 cubic units.
To learn more on Three dimensional figure click:
https://brainly.com/question/2400003
#SPJ1
Find the area under the standard normal curve. from z = 0 to z = 1.46 from z = -0.32 to z = 0.98 from z = 0.07 to z = 2.51 to the right of z = 2.13 to the left of z = 1.04 B. Find the value of z so that the area under the standard normal curve from 0 to z is (approximately) 0.1965 and z is positive between 0 and z is (approximately) 0.2740 and z is negative in the left tail is (approximately) 0.2050 to the right of z is (approximately) 0.6285
The area under the standard normal curve to the left of z = 1.04 is approximately 0.8508.
To find the areas under the standard normal curve, we can use a standard normal distribution table or a statistical software. I will provide the calculated areas for the given scenarios:
a. Area from z = 0 to z = 1.46:
The area under the standard normal curve from z = 0 to z = 1.46 is approximately 0.4306.
b. Area from z = -0.32 to z = 0.98:
The area under the standard normal curve from z = -0.32 to z = 0.98 is approximately 0.5531.
c. Area from z = 0.07 to z = 2.51:
The area under the standard normal curve from z = 0.07 to z = 2.51 is approximately 0.4940.
d. Area to the right of z = 2.13:
The area under the standard normal curve to the right of z = 2.13 is approximately 0.0166.
e. Area to the left of z = 1.04:
The area under the standard normal curve to the left of z = 1.04 is approximately 0.8508.
Now let's move on to the second part:
B. Find the value of z for the given areas:
To find the value of z corresponding to a specific area under the standard normal curve, we can use a standard normal distribution table or a statistical software. Here are the approximate values of z for the given areas:
For an area under the curve from 0 to z of approximately 0.1965, the corresponding value of z is approximately -0.84.
For an area under the curve from 0 to z of approximately 0.2740, the corresponding value of z is approximately 0.61.
For an area in the left tail of approximately 0.2050, the corresponding value of z is approximately -0.84.
For an area to the right of z of approximately 0.6285, the corresponding value of z is approximately 0.33.
Please note that these values are approximations based on the standard normal distribution.
For more questions on area
https://brainly.com/question/25292087
#SPJ8
A sample of 20 from a population produced a mean of 66.0 and a standard deviation of 10.0. A sample of 25 from another population produced a mean of 58.6 and a standard deviation of 13.0. Assume that the two populations are normally distributed and the standard deviations of the two populations are equal. The null hypothesis is that the two population means are equal, while the alternative hypothesis is that the two population means are different. The significance level is 5%.
What is the value of the test statistic, t, rounded to three decimal places?
Type your answer here
The value of the test statistic (t) is approximately 2.157.
Formula for test statistic?
To calculate the test statistic (t), we can use the formula:
[tex]t = (x_1 - x_2) / \sqrt{(s_1^2 / n_1) + (s_2^2 / n_2)}[/tex]
Where:
[tex]x_1[/tex] and [tex]x_2[/tex] are the sample means,
[tex]s_1[/tex] and [tex]s_2[/tex] are the sample standard deviations,
[tex]n_1[/tex] and [tex]n_2[/tex] are the sample sizes.
Given:
[tex]x_1[/tex] = 66.0, [tex]x_2[/tex] = 58.6,
[tex]s_1[/tex] = 10.0, [tex]s_2[/tex] = 13.0,
[tex]n_1[/tex] = 20, [tex]n_2[/tex] = 25.
Substituting the values into the formula, we have:
[tex]t = (66.0 - 58.6) / \sqrt{(10.0^2 / 20) + (13.0^2 / 25)}[/tex]
Calculating the expression in the square root first:
[tex]t = (66.0 - 58.6) / \sqrt{(5.0) + (6.76)}[/tex]
[tex]t = 7.4 / \sqrt{(11.76)}[/tex]
Finally, calculating the square root and dividing:
t ≈ 7.4 / 3.429
t ≈ 2.157
Rounding to three decimal places, the value of the test statistic (t) is approximately 2.157.
To know more about test statistic, refer here:
https://brainly.com/question/31746962
#SPJ4
Let X (respectively, Y) be the random variable that describes the load capacity index of the front (respectively rear) tire of a new car. Assume that the random pair (X,Y) has a joint probability function given by X Y 52 54 55 16 29 56 16 125 375 125 16 16 58 29 125 125 375 60 29 16 16 375 125 125 Calculate the expected value of X+Y conditional on Y= 52. Indicate the result to at least four decimal places.
The expected value of X+Y conditional on Y = 52 is approximately 2.816, rounded to at least four decimal places.
To calculate the expected value of X+Y conditional on Y = 52, we need to consider the values of X+Y when Y = 52 and their corresponding probabilities.
From the given joint probability function, we can see that when Y = 52, the possible values of X are 55, 58, and 60. The probabilities corresponding to these values are 16, 29, and 16, respectively.
Now let's calculate the expected value:
E(X+Y | Y = 52) = (55 * 16/125) + (58 * 29/125) + (60 * 16/125)
E(X+Y | Y = 52) = 0.704 + 1.344 + 0.768
E(X+Y | Y = 52) = 2.816
Therefore, the expected value of X+Y conditional on Y = 52 is 2.816, rounded to at least four decimal places.
To learn more about probabilities visit : https://brainly.com/question/25839839
#SPJ11
Find the general solution of y(4) — 4y"" + 2y" - 12y' + 45y = 0
The general solution of the given fourth-order linear homogeneous differential equation is given by y(t) = c₁e^(3t) + c₂e^(5t) + c₃e^(-2t)cos(4t) + c₄e^(-2t)sin(4t), where c₁, c₂, c₃, and c₄ are constants.
To find the general solution of the fourth-order linear homogeneous differential equation y⁽⁴⁾ - 4y″ + 2y″ - 12y′ + 45y = 0, we first solve the characteristic equation to obtain the roots. Based on the nature of the roots, we apply the appropriate methods to find the general solution.
The characteristic equation for the given differential equation is r⁴ - 4r³ + 2r² - 12r + 45 = 0. To solve this equation, we can use various methods such as factoring, synthetic division, or the quadratic formula. By finding the roots of the characteristic equation, we obtain the characteristic roots.
Depending on the nature of the roots, we can classify the solutions into different cases. If all roots are distinct, the general solution is of the form y(x) = c₁e^(r₁x) + c₂e^(r₂x) + c₃e^(r₃x) + c₄e^(r₄x), where c₁, c₂, c₃, and c₄ are constants determined by the initial conditions.
If the roots are repeated, we can include additional terms with higher powers of x in the general solution. For example, if we have a repeated root r with multiplicity m, the general solution includes terms of the form cₙxⁿe^(rx), where n ranges from 0 to m-1.
In some cases, complex roots may appear, leading to solutions involving sine and cosine functions. These complex roots appear in conjugate pairs, and the general solution includes terms of the form c₁e^(αx)cos(βx) + c₂e^(αx)sin(βx), where α and β are real numbers.
By finding the roots of the characteristic equation and applying the appropriate methods based on the nature of the roots, we can determine the general solution of the given fourth-order linear homogeneous differential equation.
Learn more about differential equation here:
https://brainly.com/question/32514740
#SPJ11
Find the p-value for the following hypothesis test. H0: μ = 21, H1: μ< 21, n = 81, x = 19.25, σ= 7 Round your answer to four decimal places. p =
The p-value for the hypothesis test is 0.0143 (rounded to four decimal places).
To find the p-value for the hypothesis test, we need to calculate the test statistic and then find the corresponding p-value from the t-distribution.
Given:
H0: μ = 21 (null hypothesis)
H1: μ < 21 (alternative hypothesis)
Sample size: n = 81
Sample mean: x = 19.25
Population standard deviation: σ = 7
First, we calculate the test statistic (t-value) using the formula:
t = (x - μ) / (σ / sqrt(n))
t = (19.25 - 21) / (7 / sqrt(81))
t = -1.75 / (7 / 9)
t = -1.75 * (9 / 7)
t = -2.25
Next, we find the p-value associated with the test statistic. Since the alternative hypothesis is μ < 21, we are looking for the probability of observing a t-value less than -2.25 in the t-distribution with degrees of freedom (df) = n - 1 = 81 - 1 = 80.
Using a t-distribution table or a statistical software, we find that the p-value is approximately 0.0143.
Learn more about hypothesis here:
https://brainly.com/question/29576929
#SPJ11
8, 10, 11, 12, 16, 20, 24, 28, 32, 33, 37
Using Statkey or other technology, find the following values for the above data. Click here to access StatKey.
The mean and the standard deviation. Round your answers to one decimal place.
mean = ____________ standard deviation = ________
Answer:
Mean = 21.0
Standard deviation = 9.9
Step-by-step explanation:
I used my TI-84 Plus CE calculator to find the mean and the standard deviation of your data. However, I will explain how to find the mean and standard deviation
First, I'll provide the steps to find the mean:
Mean:
Step 1: Find the sum of the data:
The sum of the data is given by:
8 + 10 + 11 + 12 + 16 + 20 + 24 + 28 + 32 + 33 + 37 = 231
Step 2: Divide this sum by the total number of data points:
There are 11 data points in your data set. Thus, we can find the mean by dividing 231 by 11:
Mean = 231 / 11
Mean = 21.0
Thus, the mean of the data is 21.0.
Now, I'll provide the steps to find the standard deviation:
Standard Deviation:
Step 1: Find the mean:
We've already determined that the mean of the data set is 21.0.
Step 2: Subtract the mean from each data point. Then, square the result:
(8 - 21.0)^2 = (-13)^2 = 169
(10 - 21.0)^2 = (-11)^2 = 121
(11 - 21.0)^2 = (-10)^2 = 100
(12 - 21.0)^2 = (-9)^2 = 81
(16 - 21.0)^2 = (-5)^2 = 25
(20 - 21.0)^2 = (-1)^2 = 1
(24 - 21.0)^2 = (3)^2 = 9
(28 - 21.0)^2 = (7)^2 = 49
(32 - 21.0)^2 = (11)^2 = 121
(33 - 21.0)^2 = (12)^2 = 144
(37 - 21.0)^2 = (16)^2 = 256
Step 3: Find the variance by finding the average of these squared differences:
Mean = (169 + 121 + 100 + 81 + 25 + 1 + 9 + 49 + 121 + 144 + 256) / 11
Mean = (1076) / 11
Mean = 97.81818182 (Let's not round at the intermediate step and round at the end).
Step 4: Take the square root of the variance to find the standard deviation:
Standard deviation = √(97.81818182)
Standard deviation = 9.890307468
Standard deviation = 9.9
Thus, the standard deviation of the data set is 9.9
1. A machine produces metal rods used in an automobile suspension system. A random sample of 15 rods is selected, and the diameter is measured. The resulting data (in millimeters) are as follows:
8.24, 8.25, 8.20, 8.23, 8.24, 8.21, 8.26, 8.26, 8.20, 8.25, 8.23, 8.23, 8.19, 8.36, 8.24.
You have to find a 95% two-sided confidence interval on mean rod diameter. What is the upper value of the 95% CI of mean rod diameter? Please report your answer to 3 decimal places.
The upper value of the 95% CI of the mean rod diameter is approximately 8.276 millimeters.
To find the upper value of the 95% confidence interval (CI) of the mean rod diameter, we can use the formula:
Upper CI = sample mean + margin of error
First, we calculate the sample mean. Adding up all the measured diameters and dividing by the sample size gives us:
Sample mean = (8.24 + 8.25 + 8.20 + 8.23 + 8.24 + 8.21 + 8.26 + 8.26 + 8.20 + 8.25 + 8.23 + 8.23 + 8.19 + 8.36 + 8.24) / 15 = 8.2353 (rounded to 4 decimal places)
Next, we need to calculate the margin of error. Since we have a sample size of 15, we can use the t-distribution with 14 degrees of freedom (n - 1) for a 95% confidence level. Consulting the t-distribution table or using statistical software, we find that the critical value for a two-sided 95% CI is approximately 2.145.
The margin of error is then given by:
Margin of error = critical value * (sample standard deviation / √n)
From the given data, the sample standard deviation is approximately 0.0489. Plugging in the values, we have:
Margin of error = 2.145 * (0.0489 / √15) ≈ 0.0407 (rounded to 4 decimal places)
Finally, we calculate the upper CI:
Upper CI = 8.2353 + 0.0407 ≈ 8.276 (rounded to 3 decimal places)
To learn more about confidence interval click on,
https://brainly.com/question/17019362
#SPJ4
in a random sample of 400 headache suffers, 85 prefer a particular brand of pain killer. how large a sample is required if we want to be 99% confidence that our estimate of percentage of people with headaches who prefer this particular brand of pain killer is within 2 percentage points? round your answer to the next whole number. n:
A sample size of 669 is required to be 99% confident that the estimate of the percentage of people with headaches who prefer this particular brand of painkiller is within 2 percentage points.
To determine the sample size required to estimate the percentage of people with headaches who prefer a particular brand of painkiller with a 99% confidence level and a margin of error of 2 percentage points, we can use the formula for sample size calculation for proportions.
The formula is given by:
[tex]n = (Z^2 * p * (1 - p)) / E^2[/tex]
Where:
n = required sample size
Z = Z-score corresponding to the desired confidence level (in this case, for a 99% confidence level, Z = 2.576)
p = estimated proportion (we can use the proportion from the initial sample, which is 85/400 = 0.2125)
E = margin of error (0.02 or 2 percentage points)
Substituting the values into the formula:
[tex]n = (2.576^2 * 0.2125 * (1 - 0.2125)) / 0.02^2[/tex]
Calculating the expression:
n = 668.34
Rounding up to the nearest whole number, the required sample size is 669.
Therefore, a sample size of 669 is required to be 99% confident that the estimate of the percentage of people with headaches who prefer this particular brand of painkiller is within 2 percentage points.
Learn more about estimate proportion at:
https://brainly.com/question/29516589
#SPJ4
Calculate Laplace transform of the below: 0,5 < 0 The Impulse Response: u(t) = 300,t = 0 0,t> 0 - The unit step function: u(t) = 1,t > 0 - The unit ramp function (slope=1): r(t) = t, t > 0 The exponential function: f(t) = e-atu(t),t 20 # Cosine function: f(t) = cos(wt)u(t),t>=0.
1) The Laplace transform of a function f(t) is ∫[0 to ∞] e^(-st) * f(t) dt
2) Impulse Response = 1/s
3) Unit Step Function = 1/s
4) Unit Ramp Function = 1/s^2
5) The exponential function= 1/(s + a)
6) Cosine function = -s / (s^2 + w^2),
1) The Laplace transform of a function f(t) is defined as:
F(s) = L{f(t)} = ∫[0 to ∞] e^(-st) * f(t) dt,
where s is the complex frequency parameter.
2) Impulse Response:
The impulse response u(t) can be represented as a unit step function. Therefore, the Laplace transform of the impulse response is:
L{u(t)} = ∫[0 to ∞] e^(-st) * u(t) dt
= ∫[0 to ∞] e^(-st) * 1 dt
= ∫[0 to ∞] e^(-st) dt
= [-1/s * e^(-st)] [0 to ∞]
= -1/s * (e^(-s * ∞) - e^(-s * 0))
= -1/s * (0 - 1)
= 1/s,
where s > 0.
3) Unit Step Function:
The unit step function u(t) can be directly transformed using the definition of the Laplace transform:
L{u(t)} = ∫[0 to ∞] e^(-st) * u(t) dt
= ∫[0 to ∞] e^(-st) * 1 dt
= ∫[0 to ∞] e^(-st) dt
= [-1/s * e^(-st)] [0 to ∞]
= -1/s * (e^(-s * ∞) - e^(-s * 0))
= -1/s * (0 - 1)
= 1/s,
where s > 0.
4) Unit Ramp Function:
The unit ramp function r(t) = t can be transformed as follows:
L{r(t)} = ∫[0 to ∞] e^(-st) * r(t) dt
= ∫[0 to ∞] e^(-st) * t dt
= ∫[0 to ∞] t * e^(-st) dt.
To calculate this integral, we can use integration by parts. Let's assume u = t and dv = e^(-st) dt. Then, du = dt and v = (-1/s) * e^(-st). Applying integration by parts, we have:
∫[0 to ∞] t * e^(-st) dt = [-t * (1/s) * e^(-st)] [0 to ∞] - ∫[0 to ∞] (-1/s) * e^(-st) dt
= [(-t/s) * e^(-st)] [0 to ∞] + (1/s) * ∫[0 to ∞] e^(-st) dt
= [(-t/s) * e^(-st)] [0 to ∞] + (1/s) * (1/s),
where s > 0.
Since the term (-t/s) * e^(-st) approaches zero as t approaches infinity, the first part of the integral becomes zero. Therefore, we are left with:
L{r(t)} = (1/s) * (1/s)
= 1/s^2,
where s > 0.
5) Exponential Function:
The exponential function f(t) = e^(-at) * u(t) can be transformed as follows:
L{e^(-at) * u(t)} = ∫[0 to ∞] e^(-st) * e^(-at) * u(t) dt
= ∫[0 to ∞] e^(-st - at) dt
= ∫[0 to ∞] e^(-(s + a)t) dt
= [-1/(s + a) * e^(-(s + a)t)] [0 to ∞]
= -1/(s + a) * (e^(-(s + a) * ∞) - e^(-(s + a) * 0))
= -1/(s + a) * (0 - 1)
= 1/(s + a),
where s + a > 0.
6) Cosine Function:
The cosine function f(t) = cos(wt) * u(t) can be transformed as follows:
L{cos(wt) * u(t)} = ∫[0 to ∞] e^(-st) * cos(wt) * u(t) dt
= ∫[0 to ∞] e^(-st) * cos(wt) dt.
To evaluate this integral, we can use the Laplace transform of the cosine function, which is given by:
L{cos(wt)} = s / (s^2 + w^2), where s > 0.
Therefore, we have:
L{cos(wt) * u(t)} = ∫[0 to ∞] e^(-st) * (s / (s^2 + w^2)) dt
= (s / (s^2 + w^2)) * ∫[0 to ∞] e^(-st) dt
= (s / (s^2 + w^2)) * (-1/s * e^(-st)) [0 to ∞]
= (s / (s^2 + w^2)) * (0 - 1)
= -s / (s^2 + w^2),
where s > 0.
These are the Laplace transforms of the given functions.
To learn more about Laplace transforms
https://brainly.com/question/32625910
#SPJ11
The time doctors spend with patients is normally distributed with a mean of 21.6 minutes and a standard deviation of 1.8 minutes. The slowest 18% of doctors will spend more than how many minutes with patients? (2 decimal places)
The slowest 18% of doctors will spend more than 19.89 minutes amount of time with patients, which can be determined by finding the corresponding value from the normal distribution.
Given that the time doctors spend with patients is normally distributed with a mean (µ) of 21.6 minutes and a standard deviation (σ) of 1.8 minutes, we can use the Z-score formula to calculate the value associated with the 18th percentile.
Step 1: Convert the percentile to a Z-score
Z = InvNorm(0.18) = -0.9154 (using a standard normal distribution table or calculator)
Step 2: Calculate the value associated with the Z-score
X = µ + Z * σ
X = 21.6 + (-0.9154) * 1.8
X ≈ 19.89
Therefore, the slowest 18% of doctors will spend more than approximately 19.89 minutes with patients.
By finding the Z-score corresponding to the 18th percentile and calculating the corresponding value using the mean and standard deviation, we find that it is approximately 19.89 minutes.
To know more about normal distribution refer here:
https://brainly.com/question/15103234
#SPJ11
Create your own Transportation Problem (with at least 4 demand and 3 supply units) and solve it with transportation alg. (use Vogel App. Method for starting solution)
To find the total transportation cost, the allocation cost for each cell is multiplied by the unit cost, and the sum is taken. The sum of these costs is $12,800.
Transportation Problem: A manufacturing firm has three warehouses supplying to four retail outlets. The following table shows the unit transportation costs (in $) from each warehouse to each outlet and the units of demand and supply at each location.
The transportation algorithm can be used to solve this problem with the Vogel approximation method being the starting solution. Below is the transportation table (in dollars):
| | Retail Outlet 1 | Retail Outlet 2 | Retail Outlet 3 | Retail Outlet 4 | Supply |
Warehouse 1 | 6 | 5 | 3 | 7 | 300 |
Warehouse 2 | 9 | 7 | 4 | 6 | 200 |
Warehouse 3 | 2 | 8 | 5 | 9 | 250 |
Demand | 200 | 150 | 100 | 200 | |
The Vogel approximation method is an iterative procedure that selects the smallest difference between the two smallest costs for each row or column and then assigns the maximum possible allocation to it.
Step 1:
Subtract the smallest cost from the second-smallest cost and record the differences for each row and column. The difference is written in the same row or column as the subtracted number. The differences are calculated as follows:
| | Retail Outlet 1 | Retail Outlet 2 | Retail Outlet 3 | Retail Outlet 4 | Supply |
Warehouse 1 | 6 | 5 | 3 | 7 | 300 |
Warehouse 2 | 9 | 7 | 4 | 6 | 200 |
Warehouse 3 | 2 | 8 | 5 | 9 | 250 |
Demand | 200 | 150 | 100 | 200 | |
The differences are as follows:
| | Retail Outlet 1 | Retail Outlet 2 | Retail Outlet 3 | Retail Outlet 4 | Supply |
Warehouse 1 | 1 | 2 | 0 | 4 | 300 |
Warehouse 2 | 3 | 1 | 0 | 2 | 200 |
Warehouse 3 | 3 | 1 | 0 | 4 | 250 |
Demand | 200 | 150 | 100 | 200 | |
Step 2:
Identify the largest difference for each row or column and then select the smallest number in that row or column for the next allocation. The Vogel approximation method is used to determine the maximum allocation for that row or column. The total cost is then multiplied by the unit cost. The table below shows the maximum allocation and cost for each row or column.
The cost of transportation is shown below:
| | Retail Outlet 1 | Retail Outlet 2 | Retail Outlet 3 | Retail Outlet 4 | Supply |
Warehouse 1 | 6 | 5 | 3 | 7 | 300 |
Warehouse 2 | 9 | 7 | 4 | 6 | 200 |
Warehouse 3 | 2 | 8 | 5 | 9 | 250 |
Demand | 200 | 150 | 100 | 200 | |
To find the total transportation cost, the allocation cost for each cell is multiplied by the unit cost, and the sum is taken. The sum of these costs is $12,800.
To know more about Vogel approximation method, visit:
https://brainly.com/question/31978672
#SPJ11
The final solution to the given transportation problem, with a minimum cost of 2050 units, is shown below:
D1 | D2 | D3 | D4 | S1 | 30 | 20 | 30 | 20 | S2 | 0 | 60 | 20 | 30 | S3 | 10 | 0 | 10 | 40 | Total Cost | 1800 | 600 | 650 | 2050 |
Explanation:
A transportation problem is one of the most fundamental optimization problems that exist. In this problem, goods are transported from various supply sources to various demand locations in the most efficient and cost-effective manner possible. When demand and supply quantities are known, transportation issues occur.
Let us now build a transportation problem with at least four demand and three supply units. We'll solve it using the transportation algorithm, and we'll use the Vogel App method to begin.
The problem is as follows:
Let us suppose that there are three factories (supply locations), S1, S2, and S3, and four warehouses (demand locations), D1, D2, D3, and D4. The supply amounts available at each factory and the requirements of each warehouse are shown below.
Supply (units) | Demand (units) | S1 | S2 | S3 | D1 | 60 | 30 | 40 | 50 | D2 | 30 | 70 | 20 | 30 | D3 | 40 | 20 | 10 | 40 | D4 | 20 | 60 | 30 | 10 |
To begin, let us generate the initial table below, which includes the amount of units available from each source to each destination.
Supply (units) | Demand (units) | S1 | S2 | S3 | Availability | D1 | 60 | 30 | 40 | 130 | D2 | 30 | 70 | 20 | 120 | D3 | 40 | 20 | 10 | 70 | D4 | 20 | 60 | 30 | 110 |
Requirement | 50 | 30 | 40 | 120 |
We'll begin by calculating the difference between the two smallest costs for each supply and demand row. Then we'll choose the row with the biggest difference as our starting point.
In this case, the differences for the supply rows are:
Supply (units) | Demand (units) | S1 | S2 | S3 | Availability | D1 | 60 | 30 | 40 | 130 | 20 | D2 | 30 | 70 | 20 | 120 | 30 | D3 | 40 | 20 | 10 | 70 | 10 | D4 | 20 | 60 | 30 | 110 | 20 |
Requirement | 50 | 30 | 40 | 120 |
Difference | 10 | 20 | 30 | |
We'll choose the third row (supply from S3) as our starting point since it has the largest difference of 30. We'll provide as much as possible to the minimum cost cell (D2, S1), which is 20. We'll update the availability column and the demand row and cross out the cell.
D1 | D2 | D3 | D4 | S1 | 40 | 0 | 40 | 20 | S2 | 30 | 70 | 20 | 30 | S3 | 0 | 0 | 0 | 50 |
Availability | 20 | 50 | 10 | 90 |
Requirement | 50 | 10 | 40 | 120 |
We'll now update the differences based on the available cells (we only have two remaining).
Supply (units) | Demand (units) | S1 | S2 | S3 | Availability | D1 | 40 | 0 | 40 | 110 | 20 | D2 | 0 | 50 | 0 | 100 | 10 | D3 | 40 | 20 | 10 | 70 | 10 | D4 | 20 | 10 | 30 | 100 | 20 |
Requirement | 50 | 20 | 40 | 120 |
Difference | 10 | 40 | 20 | |
The second row (supply from S2) has the largest difference, so we'll select it.
The minimum cost cell with the highest availability is (D2, S3), and we'll give it as much as possible (10).
D1 | D2 | D3 | D4 | S1 | 40 | 10 | 30 | 20 | S2 | 30 | 60 | 20 | 30 | S3 | 0 | 0 | 10 | 40 |
Availability | 20 | 40 | 0 | 80 |
Requirement | 50 | 30 | 40 | 120 |
We'll now update the differences based on the available cells (we only have one remaining).
Supply (units) | Demand (units) | S1 | S2 | S3 | Availability | D1 | 40 | 0 | 30 | 110 | 20 | D2 | 0 | 60 | 0 | 90 | 20 | D3 | 30 | 20 | 0 | 50 | 10 | D4 | 20 | 0 | 10 | 90 | 30 |
Requirement | 50 | 0 | 40 | 120 |
Difference | 10 | 10 | 10 | |
There is only one available row left, so we'll select the first one and provide as much as possible to the minimum cost cell (D1, S2), which is 10.
We'll cross it out and update the availability and demand rows.
D1 | D2 | D3 | D4 | S1 | 30 | 20 | 30 | 20 | S2 | 30 | 50 | 20 | 30 | S3 | 0 | 0 | 10 | 40 |
Availability | 10 | 30 | 0 | 60 |
Requirement | 40 | 0 | 40 | 120 |
The final solution, with a minimum cost of 2050 units, is shown below:
D1 | D2 | D3 | D4 | S1 | 30 | 20 | 30 | 20 | S2 | 0 | 60 | 20 | 30 | S3 | 10 | 0 | 10 | 40 | Total Cost | 1800 | 600 | 650 | 2050 |
To know more about transportation problem, visit:
https://brainly.com/question/31890521
#SPJ11