Are bonds broken or formed, throughout each phase change present on a heating
curve?

Answer:

Number 1 will be in the lowest molar quantity b/c formation of 1st order products are more difficult to form than secondary (#2) or tertiary (#3) substitution products.  

Explanation:

In general, if a substitution occurs such that it is attached to a carbon that's attached to only one carbon, it is referred to as a primary carbon substitution. If a substitution occurs on a carbon that is attached to two (2) carbons, it is a secondary carbon substitution. Finally, if a substitution occurs such that it is attached to a carbon that's attached to three (3) carbons it is a tertiary substitution. Typically, primary substitution products follow an Sn2 type reaction pathway. Such requires the formation of only one intermediate that difficult to form as compared to 2° or 3° intermediates. Once formed, however, they will be very unstable and proceeds to product very quickly. Such produce very low product yield. The intermediates for 2° and 3° form more easily and are more stable in the reaction environments. An example is tertiary butyl halogens (e.g., t-butyl chloride) follow and Sn1 type reaction pathway forming a tertiary carbocation which then reacts with a nucleophile of choice and forms much higher yields than the 1° carbon substitution reactions. Suggest reviewing Sn2 and Sn1 substitution reactions.

Color Change.

Production of an odor.

Change of Temperature.

Evolution of a gas (formation of bubbles)

Precipitate (formation of a solid)

Hope this helps!:)

B trust me please ..........

Answer:

both

Explanation:

depends on what type because there is fecal material dead tissue decomposing soooo both

Answer:

a) Molarity = 0.199M

b) 21.6L of solution

c) 0.199 moles of sucrose in 1L

Explanation:

a) Molarity is the ratio of moles of solute (sucrose) in volume of solution (3.30L):

Moles sucrose -Molar mass: 342,3g/mol-:

225.0g * (1mol / 342,2965g) = 0.6573 moles

Molarity = 0.6573 moles / 3.30L

b) 0.199M means 0.199 moles in 1L. 4.30 moles are in:

4.30 mol * (1L / 0.199mol) = 21.6L of solution

c) By definition, there are 0.199 moles of sucrose in 1L. This is the meaning of 0.199M

HOW TO CALCULATE MOLARITY:

QUESTION A:

QUESTION B:

QUESTION C:

Learn more at: https://brainly.com/question/8732513?referrer=searchResults

Answer: they form at equal rates

Explanation:

By definition, at equilibrium, the rate of the forward reaction is equal to the rate of the reverse reaction.

Answer:

c

Explanation:

Answer:

c

Explanation:

Answer:

takes part in a chemical reaction

Explanation:

An atom is defined as the smallest part of an element that takes part in a chemical reaction.

When chemicals react, they simply exchange their atoms and recombine to form compounds where the atoms inside of them have a stable configuration.

Answer:

5.56×10²² molecules of AlPO4

Explanation:

i think thats is the correct answer if its wrong im really sorry

There is 40 g of sugar in a 500 ml bottle of lemon juice

The concentration of a substance can be expressed in several quantities such as moles, percent (%) weight/volume,), molarity, molality, parts per million (ppm) or mole fraction. The concentration shows the amount of solute in a unit of the amount of solvent.

the concentration of sugar in lemon juice :

[tex]\tt \dfrac{20~g}{250~ml}=0.08~g/ml[/tex]

So for 500 ml juice :

[tex]\tt 500\times 0.08=40~g~sugar[/tex]

Answer:

32 degrees fahrenheit

Explanation:

Answer:

Final concentration = 0.019 M

Explanation:

Initial Concentration [A]o = 0.27M

Rate constant, k = 0.75 s^-1

Final concentration [A] = ?

Time, t = 1.5s

The relationship between the variables is given by the equation;

ln[A] = ln[A]o - kt

ln[A] = ln(0.27) - (0.75)(1.5)

ln[A] = - 1.309 - 1.125

ln[A] = - 2.434

[A] = 0.019 M

Answer:

[tex]ppth=1.2ppth[/tex]

Explanation:

Hello!

In this case, since the parts per thousand of a solute in a solute is defined in terms of its grams per kilogram of solution (unlike parts per million which are mg/kg) we can mathematically represent it via:

[tex]ppth=\frac{grams_{solute}}{kg{solution}}[/tex]

Now, since the whole human body acts as the solution and the chlorine in the form of ions as the solute, the required ppth turns out:

[tex]ppth=\frac{84.0g}{70.0kg}\\\\ppth=1.2ppth[/tex]

Best regards!

Answer:

0.12 mol O₂

Explanation:

Step 1: Write the balanced combustion reaction

C₂H₂ + 2.5 O₂ ⇒ 2 CO₂ + H₂O

Step 2: Establish the appropriate molar ratio

We want to know the moles of oxygen needed to produce 0.095 moles of carbon dioxide. The molar ratio of O₂ to CO₂ is 2.5:2.

Step 3: Calculate the moles of oxygen needed to produce 0.095 moles of carbon dioxide

0.095 mol CO₂ × 2.5 mol O₂/2 mol CO₂ = 0.12 mol O₂

Answer:

sipi

Explanation:

Answer:

oxidation, synthesis, polymerization

Explanation: I took the test

The three types of reactions are product that is a chemically bonded combination of reactants are oxidation, synthesis, polymerization

Conclusively, we can therefore say that the three types of reactions are product that is a chemically bonded combination of reactants are oxidation, synthesis, polymerization

Learn more from:

https://brainly.com/question/14197404

Answer:

Groups 1 and 2.

Explanation:

The elements of Group 1 and Group 2 of the modern periodic table are called S block elements. The two types of s block elements are possible i.e. the elements with one electron (s1) or the elements with two electrons (s2) in their s-subshell.

Answer:

An element is the simplest form of matter that cannot be split into simpler substances or built from simpler substances by any ordinary chemical or physical method. There are 110 elements known to us, out of which 92 are naturally occurring, while the rest have been prepared artificially. Elements are further classified into metals, non-metals, and metalloids.

Table 2.11.1: Characteristic properties of metallic and non-metallic elements:

Distinguishing luster (shine)

Non-lustrous, various colors

Nonmetals

Elements that tend to gain electrons to form anions during chemical reactions are called non-metals. These are electronegative elements. They are non-lustrous, brittle and poor conductors of heat and electricity (except graphite). Non-metals can be gaseous, liquids or solids.

Physical Properties of nonmetals:

Physical State: Most of the non-metals exist in two of the three states of matter at room temperature: gases (oxygen) and solids (carbon).

Non-Malleable and Ductile: Non-metals are very brittle, and cannot be rolled into wires or pounded into sheets.

Conduction: They are poor conductors of heat and electricity.

Luster: These have no metallic luster and do not reflect light

Conductivity: Poor conductors of heat and electricity

Melting and Boiling Points: The melting points of non-metals are generally lower than metals

Seven non-metals exist under standard conditions as diatomic molecules:

H2(g)

N2(g)

O2(g)

F2(g)

Cl2(g)

Br2(l)

I2(l) (volatile liquid - evaporates readily)

Chemical Properties of Nonmetals

Non-metals have a tendency to gain or share electrons with other atoms. They are electronegative in character.

Nonmetals, when reacting with metals, tend to gain electrons (typically attaining noble gas electron configuration) and become anions:

Nonmetal + Metal -> Salt

3Br2(l)+2Al(s)→2AlBr3(s)(2.11.4)

Compounds composed entirely of nonmetals are molecular substances (not ionic).

They generally form acidic or neutral oxides with oxygen that that dissolve in water react to form acids:

Physical Properties of Metalloids

State: They are all solid at room temperature.

Conduction: Some metalloids, such as silicon and germanium, can act as electrical conductors under the right conditions, thus they are called semi-conductors.

Luster: Silicon for example appears lustrous, but is not malleable or ductile (it is brittle - a characteristic of some nonmetals). It is a much poorer conductor of heat and electricity than the metals.

Solid Solutions: They can form alloys with other metals.

Chemical Properties of Metalloids

Their physical properties tend to be metallic, but their chemical properties tend to be non-metallic.

The oxidation number of an element in this group can range from +3 to -2, depending on the group in which it is located.

Trends in Metallic and Nonmetallic Character

Metallic character is strongest for the elements in the leftmost part of the periodic table, and tends to decrease as we move to the right in any period (nonmetallic character increases with increasing ionization values). Within any group of elements (columns), the metallic character increases from top to bottom (the ionization values generally decrease as we move down a group). This general trend is not necessarily observed with the transition metals.

2.10: Electron Affinities 2.12: Electronegativity

Recommended articles

2.1: Many-Electron Atoms

2.2: Electron Configurations

2.3: Electron Configurations and the Periodic Table

2.4: Development of the Periodic Table

2.5: Effective Nuclear Charge

The calculation of orbital energies in atoms or ions with more than one electron (multielectron atoms or ions) is complicated by repulsive interaction...

The LibreTexts libraries are Powered by otherwise noted, LibreTexts content is licensed by CC BY-NC-SA 3.0. Have questions or comments? For mor

Explanation:

its D

Answer:

(A) Varying ability to conduct electric current.

Explanation:

The most useful property of metalloids is their varying ability to conduct electric current.

Metalloids are elements or substances that shares properties that transcends between those of a true metal and non-metal.

Answer: the non metal

Explanation:

Answer:

9.62moles of NH₃

Explanation:

Given parameters:

Number of moles of nitrogen  = 4.81moles

Unknown:

Number of moles of  NH₃ = ?

Solution:

To solve this problem, we need to establish a balanced reaction equation:

            N₂  +  3H₂  →  2NH₃

Now, we can solve the problem by working from the known to the unknown.

          1 mole of N₂ produced 2 moles of NH₃

         4.81moles of N₂ will produce 2 x 4.81  = 9.62moles of NH₃

Answer:

KOH  molar mass = 39 + 16 + 1 = 56g

To make 1 L of 1M soln needs 56g KOH

To make 500mL 1M needs 56/2 = 28g

To make 500mL 0.2M needs 28 x 0.2gn:

Explanation:

The weight of KOH are required to prepare 500. mL of 0.450 KOH solution is 12.6 gm

Molar concentration is a measure of the concentration of a chemical species, in particular of a solute in a solution, in terms of amount of substance per unit volume of solution.

In chemistry, the most commonly used unit for molarity is the number of moles per liter, having the unit symbol mol/L or mol/dm³ in SI unit.

Molar mass of KOH  = 39 + 16 + 1 = 56g

To make 1 L of 1M soln needs =  56g KOH

To make 500mL 1M needs 56/2 = 28g

To make 500mL 0.450 M needs =  28 x 0.450

                                                      =  12.6 gm

Therefore, The weight of KOH are required to prepare 500. mL of 0.450 KOH solution is 12.6 gm.

Learn more about concentration here ;

https://brainly.com/question/10725862

#SPJ2

Answer:

A.Realesing contaminated waste into the water system

Explanation:

because if you you try it would really work

Answer:

Fossils of the same animals have been found on South America and on Africa.

Africa and South America look as if they could be fit together perfectly (they almost can!)

Explanation:

Basically, the idea is that South Africa and Africa were once the same landmass. The same animals lived in that landmass, but when they broke off, then the animals were on different continent, yet they came from the same place.

Answer:

Brainliest?

Explanation:

pls!!!!!

color of the substance

Answer:

Rutherford's gold foil experiment showed that the atom is mostly empty space with a tiny, dense, positively-charged nucleus. Based on these results, Rutherford proposed the nuclear model of the atom.