Answer:
The rate of change of distance between the two ships is 18.63 km/h
Explanation:
Given;
distance between the two ships, d = 140 km
speed of ship A = 30 km/h
speed of ship B = 25 km/h
between noon (12 pm) to 4 pm = 4 hours
The displacement of ship A at 4pm = 140 km - (30 km/h x 4h) =
140 km - 120 km = 20 km
(the subtraction is because A is moving away from the initial position and the distance between the two ships is decreasing)
The displacement of ship B at 4pm = 25 km/h x 4h = 100 km
Using Pythagoras theorem, the resultant displacement of the two ships at 4pm is calculated as;
r² = a² + b²
r² = 20² + 100²
r = √10,400
r = 101.98 km
The rate of change of this distance is calculated as;
r² = a² + b²
r = 101.98 km, a = 20 km, b = 100 km
[tex]2r(\frac{dr}{dt} ) = 2a(\frac{da}{dt} ) + 2b(\frac{db}{dt} )\\\\r(\frac{dr}{dt} ) = a(\frac{da}{dt} ) + b(\frac{db}{dt} )\\\\101.98(\frac{dr}{dt} ) = 20(-30 ) + 100(25 )\\\\101.98(\frac{dr}{dt} ) = -600 + 2,500\\\\101.98(\frac{dr}{dt} ) = 1900\\\\\frac{dr}{dt} = \frac{1900}{101.98} = 18.63 \ km/h[/tex]
If the child has a mass of 13.9 kg, calculate the magnitude of the force in newtons the mother exerts on the child under the following conditions. (b) The elevator accelerates upward at 0.898 m/s2. 148.702 N
The elevator accelerates upward at an acceleration, then the magnitude of the force is 148.84 N.
What is Force?The force is the action of push or pull which makes an object to move or stop.
Given the mass of child m =13.9 kg, acceleration a =0.898 m/s², then the force will be given by
F = m(g-a)
F = 13.9 x (9.81 - (-0.898))
F = 148.84 N
Thus, the magnitude of the force is 148.84 N.
Learn more about force.
https://brainly.com/question/13191643
#SPJ2
If a second ball were dropped from rest from height ymax, how long would it take to reach the ground
Answer:
[tex](b)\ t_1 - t_0[/tex]
[tex](d)\ t_2 - t_1[/tex]
[tex](e)\ \frac{t_2 - t_0}{2}[/tex]
Explanation:
Given
See attachment for complete question
Required
How long to reach the ground from the maximum height
First, calculate the time of flight (T)
[tex]T =t_2 - t_0[/tex]
The time taken (t) from maximum height to the ground is:
[tex]t = \frac{1}{2}T[/tex]
So, we have:
[tex]t = \frac{t_2 - t_0}{2}[/tex]
Another representation is:
At ymax, the time is: t1
On the ground, the time is t2
The difference between these times is the time taken.
So;
[tex]t = t_2 - t_1[/tex]
Since air resistance is to be ignored, then
[tex]t_2 - t_1 = t_1 - t_0[/tex] --- i.e. time to reach the maximum height from the ground equals time to reach the ground from the maximum height
A car drives 110 km in 2 hours. Calculate the speed of the car
Answer: 55 kmph
Explanation: Divide 110 by 2
A car travels at a constant speed around a circular track whose radiu is 2.6 km. The goes once arond the track in 360s . What is the magnitude
Answer:
Centripetal acceleration = 0.79 m/s²
Explanation:
Given the following data;
Radius, r = 2.6 km
Time = 360 seconds
Conversion:
2.6 km to meters = 2.6 * 1000 = 2600 meters
To find the magnitude of centripetal acceleration;
First of all, we would determine the circular speed of the car using the formula;
[tex] Circular \; speed (V) = \frac {2 \pi r}{t}[/tex]
Where;
r represents the radius and t is the time.Substituting into the formula, we have;
[tex] Circular \; speed (V) = \frac {2*3.142*2600}{360} [/tex]
[tex] Circular \; speed (V) = \frac {16338.4}{360} [/tex]
Circular speed, V = 45.38 m/s
Next, we find the centripetal acceleration;
Mathematically, centripetal acceleration is given by the formula;
[tex] Centripetal \; acceleration = \frac {V^{2}}{r}[/tex]
Where;
V is the circular speed (velocity) of an object.r is the radius of circular path.Substituting into the formula, we have;
[tex] Centripetal \; acceleration = \frac {45.38^{2}}{2.6}[/tex]
[tex] Centripetal \; acceleration = \frac {2059.34}{2600}[/tex]
Centripetal acceleration = 0.79 m/s²
Convert 387.1 K to °C
A weightlifter presses a 200 N weight 0.5 m over his head in 2 s. What is the power of the weightlifter
Answer:
50 watts
Explanation:
Applying,
Power (P) = Workdone (W)/Time(t)
But,
Work done (W) = Force (F)×distance(d)
Therefore,
P = Fd/t..................... Equation 1
Where P = power of the weightlifter, F = Force applied, d = distance, t = time.
From the question,
Given: F = 200 N, d = 0.5 m, t = 2 s
Substitute these values into equation 1
P = (200×0.5)/2
P = 100/2
P = 50 watts
A ball is launched from the ground with a horizontal speed of 30 m/s and a vertical speed of 30 m/s. What will the vertical speed be right before it hits the ground?
A. 0 m/s
B. 15 m/s
C. 40 m/s
D. 30 m/s
Answer:
Explanation:
The nice thing about parabolic motion is that the object launched from a certain height will have the same velocity coming down when it reaches that height again, just in the opposite direction. For us, that means if the velocity of the ball right off the ground is 30 m/s, then right before it hits the ground again it will be -30 m/s (the negative just means that the direction is the opposite). Your choice is D.
5N
5 N
19 N
19 N
Pls help look at the pic
Answer:
b. is the correct answer ....
If you move 10 times farther away from a source of light, then how will the
apparent brightness of that source change?
it will become 10 times less bright
it will become 2 times less bright
its brightness will not change
O it will become 100 times less bright
A charged particle enters into a uniform magnetic field such that its velocity vector is perpendicular to the magnetic field vector. Ignoring the particle's weight, what type of path will the particle follow
Answer:
a circular path
Explanation:
In a magnetism field if a charged particle having a charge of magnitude '' enters such that its velocity vector V is 90° to the direction of the magnetic field "B'', then it will experience a force, called Lorentz force F
[tex]F = V\times B[/tex]
According to the property of cross-product, the Lorentz force (F) acting on the particle will be perpendicular to the instantaneous position of the particle, making the path of the particle to be a circular path.
At what speed was object A moving ?
Answer:
C
Explanation:
The answer is C because if you look at the 1 hour mark it shows 10km
Answer:It will be 10km/hour
Explanation:
a) Find the current in the 1 Ω resistor.
b ) Find the current in the 8 Ω resistor.
c ) Find the current in the 5 Ω resistor.
PLEASE HELP I NEED THIS TODAY
Answer:
a)I=V/R
39.5 amp
Explanation:
because the voltage in serious with 1ohm resistor
A 1.2 kg basketball is thrown upwards. What is the potential energy of the basketball at the top of its path if it reaches a height of 15.6 m?
Answer:
Answer is 183.6 J
Explanation:
Using the Physics reference sheet the formula for Potential energy is
(mass) x (gravity) x (height)
Mass= 1.2
Gravity I used is 9.81 (use 10 to get the answer most schools use)
Height= 15.6
Activity 1
The equation for the combustion of butane gas is given below.
1.1
1.2
AH < 0
butane(g) + 1302(g) → 8CO2(g) + 10H2O(g)
Define the term activation energy.
Is the combustion reaction of butane exothermic or endothermic? Give
reason for the answer.
Draw a sketch graph of potential energy versus course of reaction for
reaction above.
3
Clearly indicate the following on the graph:
o
Activation energy
Heat of reaction (AH)
Reactants and products
Determine the empirical formula of butane gas if it consists of 82,76%
and 17,24% hydrogen.
Answer:
I don't know hhaha ammmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm I wish I could help
What are the relationships between the temperature scales of Fahrenheit, Kelvin, Celsius, and Rankine
The maximum amount of pulling force a truck can apply when driving on
concrete is 8760 N. If the coefficient of static friction between a trailer and
concrete is 0.8, what is the heaviest that the trailer can be and still be pulled
by the truck?
O A. 8760 N
O B. 12,680 N
O C. 10,950 N
O D. 7240 N
Answer:
8760 N
Explanation:
think this is the right answer :)
What are impact and non-impact printers?
Impact printers involve mechanical components for conducting printing. It is a type of printer that works by direct contact of an ink ribbon with paper.
In Non-Impact printers, no mechanical moving component is used.
mark me brainliesttt :)))
consider a circular loop of wire carrying a counterclockwise current as shown. Indicate the direction of the magnetic field at points both inside and outside of the loop.
Answer:
in this case around the loop the field points downwards on the outside and upwards on the inside
Explanation:
To find the direction of the magnetic field in a wire you must use the right hand rule.
The thumb points in the direction of the current flow and the other created fingers point in the direction of the magnetic field.
Therefore in this case around the loop the field points downwards on the outside and upwards on the inside
Which of the following would likely happen if a person’s lactic acid system had difficulty breaking down glycogen in the muscles?
The person would have difficulty swimming across a lake.
The person would have difficulty sprinting in a race.
The person would have difficulty cycling down a hill.
The person would have difficulty running a marathon.
Answer: I think that its b, they would have difficulty sprinting in a race
Explanation:
A tank containing a fluid is stirred by a paddle wheel. The work input to the paddle wheel is 5090 kJ. The heat transfer from the tank is 1500 kJ. Consider the tank and the fluid inside a control surface and determine the change in internal energy, in kJ, of this control mass.
Answer: [tex]3590\ kJ[/tex]
Explanation:
Given
Paddle wheel work is [tex]W=-5090\ kJ\quad \text{work is done on the system}[/tex]
Heat transfer from the tank is [tex]Q=-1500\ kJ\quad \text{heat taken from the system}[/tex]
From the first law of thermodynamics
Change in the internal energy of the system is equal to the difference of heat and work .
[tex]\Rightarrow \Delta U=Q-W\\\Rightarrow \Delta U=-1500-(-5090)\\\Rightarrow \Delta U=3590\ kJ[/tex]
Therefore, the change in internal energy is [tex]3590\ kJ[/tex]
The blade of a windshield wiper moves through an angle of 90.08 in 0.40 s. The tip of the blade moves on the arc of a circle that has a radius of 0.45 m. What is the magnitude of the centripetal acceleration of the tip of the blade
Answer:
The centripetal acceleration is 6.95 m/s²
Explanation:
Given;
angular displacement of the blade, θ = 90.08⁰
duration of motion of the blade, t = 0.4 s
radius of the circle moved by the blade, r = 0.45 m
The angular speed of the blade in radian is calculated as;
[tex]\omega = \frac{\theta}{t} \times \frac{\pi \ radian}{180^0} \\\\\omega = \frac{90.08 ^0}{0.4 \ s} \times \frac{\pi \ radian}{180^0} \\\\\omega = 3.93 \ rad/s[/tex]
The centripetal acceleration is calculated as;
a = ω²r
a = (3.93)² x 0.45
a = 6.95 m/s²
A hot-air balloon stays aloft because hot air at atmospheric pressure is less dense than cooler air at the same pressure. If the volume of the balloon is 500.0 m^3 and the surrounding air is at 15.0°C. What must the temperature of the air in the balloon be for it to lift a total load of 290 kg (in addition to the mass of the hot air)? The density of air at 15.0°C and atmospheric pressure is 1.23kg/m^3.
Answer:
272° C
Explanation:
Given :
Volume of the balloon, V = 500 [tex]m^3[/tex]
The temperature of the surrounding air, [tex]T_{air} = 15^\circ C[/tex]
Total load, [tex]m_{T}[/tex] = 290 kg
Density of the air, [tex]$\rho_{air} = 1.23 \ kg/m^3$[/tex]
We known buoyant force,
[tex]$F_B = \rho_{air} V$[/tex]
For a 290 kg lift, [tex]$m_{hot} = \frac{F_B}{g} = 290 \ kg$[/tex]
[tex]$m=\rho V$[/tex]
∴ [tex]$m_{hot}=\rho_{hot} V ; \ \ \ \ \ \frac{F_B}{g}-m_{hot} = 290 \ kg$[/tex]
[tex]$(\rho_{air} - \rho_{hot}) V= 290 \ kg$[/tex]
[tex]$\rho_{hot} = \rho_{air}- \frac{290}{V} \ kg = 1.23 \ kg/m^3 - \frac{290 \ kg}{500 \cm^3}$[/tex]
[tex]$\rho_{hot}= 0.65 \ kg/m^3 =\frac{\rho M}{R T_{hot}}$[/tex]
∴ [tex]$\rho_{hot} T_{hot}= \rho_{air} T_{air}$[/tex]
[tex]$T_{hot}= T_{air}\left[\frac{\rho_{air}}{\rho_{hot}}\right]$[/tex]
[tex]$=288 \ K \times \frac{1.23 \ kg/m^3}{0.65 \ kg/m^3}$[/tex]
= 545 K
[tex]$=272^\circ C$[/tex]
Therefore, temperature of the air in the balloon is 272 degree Celsius.
To lift a load more than the weight of the balloon, the temperature of the air in the balloon has to be higher than the air in the surrounding.
The temperature of the air in the balloon to lift a total load of 290 kg is approximately 272.12°C.Reasons:
Given information are;
Volume of the balloon = 500.0 m³
Temperature of the surrounding air = 15.0°C
Density of air at 15.0°C = 1.23 kg/m³
Required:
The temperature required to lift 290kg.
Solution:
Let, [tex]\rho _{air , b}[/tex], represent the density of the air in the balloon, we have;
[tex]\rho _{air , b}[/tex] × 500.0 + 290 = 1.23 × 500
Therefore;
[tex]\displaystyle \rho _{air , b} = \frac{1.23 \times 500- 290}{500} = 0.65[/tex]
According to the Ideal Gas Law, we have;
ρ₁ × R × T₁ = ρ₂ × R × T₂
Therefore;
[tex]\displaystyle T_2 = \mathbf{\frac{\rho_1 \times T_1}{\rho_2}}[/tex]
Therefore;
[tex]\displaystyle T_2 = \frac{1.23\times288.15}{0.65} \approx 545.27[/tex]
The temperature of the balloon, T₂ ≈ 545.27 - 273.15 = 272.12
The temperature of the air in the balloon, T₂ ≈ 272.12 °C
Learn more hear:
https://brainly.com/question/11236279
Please help! ❤️
I’ll make you the Brainlyest, I can’t get this one wrong.
A ballistic pendulum is a device for measuring the speed of a projectile. The projectile is launched horizontally and embeds in a stationary block on the end of a string. The block-projectile system swings upward after the collision, reaching a maximum height. Which of the following statements is correct about the collision between the projectile-block system?
a. Kinetic energy of the system is conserved.
b. Linear momentum of the system is conserved.
c. Linear momentum of the system is not conserved.
d. The total mechanical energy of the system is conserved
please help! will mark brainliest
Answer:
27.D.28.AExplanation:
THE ANSWERME MY ANSWERWAH IS ME AND MY ANSWER WAHHHWALA NA SIYA WALA NA SIYA MASAYA MASAYA MASAYA WAHHtinapon na siya tipon na siya wahhsa basurahan wahh wahh ...............You’re working with a patient who suddenly falls. You should?
After your school's team wins the regional championship, students go to the dorm roof and start setting off fireworks rockets. The rockets explode high in the air and the sound travels out uniformly in all directions. If the sound intensity is 1.62 10-6 W/m2 at a distance of 165 m from the explosion, at what distance from the explosion is the sound intensity half this value
Answer:
required distance is 233.35 m
Explanation:
Given the data in the question;
Sound intensity [tex]I[/tex] = 1.62 × 10⁻⁶ W/m²
distance r = 165 m
at what distance from the explosion is the sound intensity half this value?
we know that;
Sound intensity [tex]I[/tex] is proportional to 1/(distance)²
i.e
[tex]I[/tex] ∝ 1/r²
Now, let r² be the distance where sound intensity is half, i.e [tex]I[/tex]₂ = [tex]I[/tex]₁/2
Hence,
[tex]I[/tex]₂/[tex]I[/tex]₁ = r₁²/r₂²
1/2 = (165)²/ r₂²
r₂² = 2 × (165)²
r₂² = 2 × 27225
r₂² = 54450
r₂ = √54450
r₂ = 233.35 m
Therefore, required distance is 233.35 m
А bus has started to move from
the rest with an acceleration of
0.25 m/s². find its final velocity
light travels approximately 982,080,000 ft/s, and one year has approximately 32,000,000 seconds. A light year is the distance light travels in one year.
Answer:
The distance traveled in 1 year is: [tex]3.143*10^{16}ft[/tex]
Explanation:
Given
[tex]s = 982,080,000 ft/s[/tex] --- speed
[tex]t = 32,000,000 s[/tex] --- time
Required
The distance traveled
This is calculated as:
[tex]Speed = \frac{Distance}{Time}[/tex]
So, we have:
[tex]Distance = Speed * Time[/tex]
This gives:
[tex]Distance = 982,080,000 ft/s * 32,000,000 s[/tex]
[tex]Distance = 982,080,000 * 32,000,000ft[/tex]
[tex]Distance = 3.143*10^{16}ft[/tex] -- approximated
Which of these is a source of thermal energy inside earth
There's no multiple answers that you added if that's what you meant but it possibly could be Magma or radioactive decay of particles from the earths core if those two are any of the options