Answer:
you hit the breakes and wait till the light turns green and then turn on your blinkers im very sorry if this is wrong
Explanation:
:)
At some intersections, the traffic signals has been equipped with the sensors just to detect vehicles, and the traffic signal will only change if a vehicle facing the red traffic light stops at the stop line.
What is a traffic signal?A traffic signal has been refers to the sign that has been erected just beside or above roads by the road safety agency, in order to give warnings and the instructions to road users such as the Driverers, the Passengers, or the Pedestrians.
At some intersections, the traffic signals has been equipped with the sensors just to detect vehicles, and the traffic signal are the programmed to the only change if a vehicle facing the red traffic light stops at the stop line.
Traffic at intersection could be complicated at the times. If the green light comes on after just a red light, you have the right of way to go, but you should be careful to only go when the intersection is clear to avoid an accident.
Therefore, At some intersections, the traffic signals has been equipped with the sensors just to detect vehicles, and the traffic signal will only change if a vehicle facing the red traffic light stops at the stop line.
Learn more about traffic light on:
https://brainly.com/question/29038476
#SPJ2
Your questions seems to be incomplete, the complete question is most probably is
At some intersections the traffic signals have sensors to detect vehicles, and the traffic signal will only change if A: At least two vehicles have stopped at the red traffic light. B: A vehicle facing the red traffic light stops 20 feet back from the stop line. C: A vehicle facing the red traffic light stops at the stop line.
When two or more people give something up to resolve a problem, they have _____.
The collapse of the magnetic field inside the ignition coil happens as a
result of the interruption of current to the:
A circuit is a pathway for electron flow.
A. True
B. False
Higher voltage creates less current flow.
A. True
B. False
Which factor does not affect
resistance.
A. Wire color
B. Length
C. Wire diameter
D. Temperature
E. Material type
Resistance is measured in ohm’s
A. True
B. False
Voltage equals pressure
A. True
B. False
Amperage is the rate of electron flow
A. true
B. False
Answer:
True
False
Wire color
True
False
True
Why are scientists and engineers looking for ways to reduce our dependence on fossil fuels? Help
In order to lift a lighter object on the other side, a boy placed 155 N of
effort force through a vertical distance of 0.25 m. How far will the lever lift
the lighter object if the resistance distance is 3.5 m from the fulcrum and
the effort distance is 1.5 m from the fulcrum? *
Answer:
0.58 m
Explanation:
In order to find the vertical distance the load lifts, we first need to find the magnitude of the resistance force. So, Rd = Fd' where R = resistance force = ?, d = resistance distance = 3.5 m, F = effort force = 155 N and d' = effort distance = 1.5 m.
So R = Fd'/d = 155 N × 1.5 m/3.5 m = 232.5 Nm/3.5 m = 66.43 N
Now, the vertical work done by the effort = vertical work done by load
Fy = Ry' where y = vertical distance moved by effort = 0.25 m and y' = vertical distance moved by resistance force
So, Fy = Ry'
y' = Fy/R
= 155 N 0.25 m/66.43 N
= 38.75 Nm/66.43 N
= 0.58 m
So, the vertical distance the lighter object moves is y' = 0.58 m
HELP!!!
What is the mass of a cylinder of lead that is 2.50 cm in diameter, and 5.50 cm long. The density of lead is 11.4 g/cm3. Volume = h r2 (Show your work)
Density of cylinder = 11.4g/cm3
Volume of cylinder = h r2
but height (h) = 5.50cm
radius(r) = d/2 = 2.50/2 = 1.25cm
Hence Volume = 5.50 × (1.25)2
= 8.6cm3
Density = Mass/Volume
Hence Mass of the cylinder =
Density × Volume
Mass = 11.4 × 8.6 = 94.04g.
Imagine you have to create a pet robot that responds to touch. When someone touches or pets the head of the robot, the LED lights should blink. You have to create the robot head with legs. List the components and tools you will use to create this robot. Research online if required.
Answer:
ive been stuck on this for 30 minutes bro
Explanation:
Which of the following men was the first to use graphs to analyze statistical data?
Copernicus
Escher
Playfair
Aldrin
what car do you like better
I like the orange and red one
What are some constraints related to size, time, or materials? Remember, constraints are limitations, issues, or obstacles.
Answer:
too big, too small, deadlines, not enough materials
Explanation:
What is the purpose of a scatter plot?
In which equation is y a nonlinear function of x
PLEASE HURRY!!!
Which of the following distinguishes a geotechnical engineer from a structural engineer?
A geotechnical engineer investigates subsurface conditions.
A geotechnical engineer ensures building safety.
A geotechnical engineer designs and plans the construction of structures.
A geotechnical engineer has a mechanical engineering degree.
Answer:
A
Explanation:
I just took the test. Plus I'm built different ;]
Answer:
A geotechnical engineer investigates subsurface conditions.PLZ HELP ASAP!!!
Chan is creating a robot that will pick packed boxes in a supermarket. Which actuator will he use in the application?
A. R/C servo motor
B. stepper motor
C. DC motor
D. DC linear actuator
The correct answer is D. DC linear actuator.
A DC linear actuator converts a rotating motion into a linear motion, and is used to lift weights.
I took the test and got it right, so I hope this helps! :)
Foam weather stripping is often placed in the frames of doors and
windows in a home. What effect does this weather stripping have?
The weather stripping increases heat transfer by radiation.
Heat is conducted quickly through the weather stripping.
The weather stripping reduces heat loss due to convection.
Heat can transfer through the weather stripping due to reflection
Answer:
prevents weathering
Explanation:
9 Select the correct answer. Conservation agents object to legal hunting. OA True B. False
Answer:
its true
Explanation:
How can you drop two eggs the fewest amount of times, without them breaking?
Armando is trying to decide how he will alert players that the game is over in the new video game that he is designing. He is considering showing a message that says “Game Over” or perhaps showing a scoreboard at the end. Which of the four elements is Armando working on in his GDD? operation obstacles outcome objective PLZZZZZZZZZZZZZZ HURFRY MT TEST IS TIMED
Answer:
if(x + dx > canvas.width-ballRadius || x + dx < ballRadius) {
dx = -dx;
}
if(y + dy > canvas.height-ballRadius || y + dy < ballRadius) {
dy = -dy;
}
var interval = setInterval(draw, 10);
if(y + dy < ballRadius) {
dy = -dy;
} else if(y + dy > canvas.height-ballRadius) {
alert("GAME OVER");
document.location.reload();
clearInterval(interval); // Needed for Chrome to end game
}
Answer:
sry im late but its outcome
Explanation:
it describes the end of the game and i got 100:
PLEASE HURRY!!!
Which option indicates the path Seth should take in the following scenario?
Seth graduated with a civil engineering degree. He wants to become a geotechnical engineer.
Seth should work for two years in the engineering field to gain experience.
Seth should obtain a bachelor’s degree in structural engineering.
Seth should study to pass his state’s written examination.
Seth should obtain a graduate degree in civil engineering.
Answer:
A
Explanation:
He should get a job in engineering to see what it's like to work in the field.
I can confirm that the answer is "Seth should work for two years in the engineering field to gain experience." :)
( On my own, I had put "Seth should obtain a graduate degree in civil engineering." as my answer and got the question wrong. It showed me that this was the correct answer. )
Which of the following is the class of ingredient which is the base for most baked items?
Answer:flour
Explanation:
Division of labor means that one worker would now have to divide his or her time between a number of tasks.
A. True
B. False
The _____ plane is the plane in which the side of an object appears in
its true size and proportion.
This is for Drafting and Mech Drawing
Answer:
It is true
Explanation:
how do simple machines make work easier
a.they increase the force needed to work
b.they add energy to work
c.they reduce the speed of work over a long period of time
d.they increase the distance over which a force is applied
Answer: The answer is D
Explanation:
I think it is
Answer:
D.
Explanation:
hope this helps, mark me brainliest! xo!
Drag each label to the correct location on the chart. Classify the organisms based on how they obtain food.
Autograph: Trees (Image 1), algae (Image 4), carrots (image 6)
Heterograph: Tiger (Image 2), deer (image 3), human (image 5)
Explanation:
The difference between autotroph and heterotroph organisms is the way they obtain energy. In the case of the first category, these include organisms that can produce energy by a process known as photosynthesis. This covers all plants and similar such as tress, algae, and carrots.
On the other hand, heterotrophic organisms cannot produce energy and need to feed on other organisms, which can include feeding on plants or animals. In this context, this category includes tigers because they feed on other animals, deer because they feed on plants, and humans because we feed on plants and animals.
Answer:
Autograph: Trees (Image 1), algae (Image 4), carrots (image 6)
Heterotroph: Tiger (Image 2), deer (image 3), human (image 5)
I hope this helps
what you guys like the best
Answer:
I Don't Know
Explanation:
Which employer is the least likely for careers in Energy?
self-employed
state government
local government
private company
Answer: Self-Employed,
Explanation: Edge 2020.
A self-employed employee is the least likely for careers in Energy.
Who is a self-employed employee?A self-employed employee is defined as the self working person that is not hired by a single company that gives them a set salary or wage.
Self-employed people, often known as independent contractors, make money by directly contracting with a trade or business. Energy occupations are least likely to be pursued by self-employed individuals.
Therefore, option A is correct.
Learn more about the self-employed, refer to:
https://brainly.com/question/13308791
#SPJ2
What is the weight of an 80 kg astronaut on Earth? *
Answer:
uhm
Explanation:
A manufacturer has been asked to produce 100 customized metal discs with a particular pattern engraved on them. Which production process should be selected?
Answer:
Job Shop production
Explanation:
Why did Jesus Christ die?
Answer:
I know my answer is dumb but I think he died because he was old.
Answer:
Jesus Christ died for our sins
Explanation:
what truck you like the best
Answer:
The 3rd one!!!!
Answer: the last white one its looks better than all of them
Explanation: