Car headlights have both low beams and high beams. The high beams may be necessary when it is very dark outside. If the power for the high beam is 60.0 watts and the current is 5.0 amps, how much voltage is required?

A.
65 volts
B.
0.088 volts
C.
12 volts
D.
55 volts

Answers

Answer 1

Answer:

Voltage, V = 12 V.

Explanation :

It is given that,

The power for the high beam is, P = 60.0 watts

Current flowing, I = 5 A

Car headlights have both low beams and high beams. The high beams may be necessary when it is very dark outside.

So, the voltage required for the high beam is 12 V.


Related Questions

How does Mountaineering help to improve our lifestyle?​

Answers

Answer:There are numerous benefits to mountaineering. The most obvious benefits are improving both your physical fitness and cardiovascular fitness levels as well as reducing body fat through aerobic exercise.

Explanation: trust

Answer:

Lower your risk of heart disease. Improve your blood pressure and blood sugar levels. Boost bone density, since walking is a weight-bearing exercise.

An electromagnetic wave has a frequency of 1.0 x 10^5. What is the wavelength of the wave?

Answers

Answer:

The frequency , speed and wavelength of an electromagnetic wave are related by the formula

Speed = frequency x wavelength

frequency = speed / wavelength

substituting the values

frequency = 3 x #10 ^8# m /s / 1 x #10^15# m

= 3 x #10^-7# /s

The wavelength of the wave will be 3000 m. The relationship between the wave's wavelength, time, and speed is used to solve the problem.

What is wavelength?

The distance between two successive troughs or crests is known as the wavelength. The peak of the wave is the highest point, while the trough is the lowest.

The given data in the problem is;

[tex]\lambda[/tex] is the wave's wavelength

c denotes the wave's speed=3×10⁸ m/secv

v is the frequency = 1 ×10⁵ Hz

The relationship between the wave's wavelength, time, and speed is given as

[tex]\rm \lambda = \frac{c}{v} \\\\ \rm \lambda = \frac{3 \times 10^8}{1.0 \times 10^5} \\\\ \lambda=30000 \ m[/tex]

Hence the wavelength of the wave will be 3000 m.

To learn more about the wavelength refer to the link;

brainly.com/question/7143261

Why would ash from a volcano make the temperature drop?

Answers

First, volcanic eruptions produce major quantities of carbon dioxide (CO2), a gas known to contribute to the greenhouse effect. ... The small ash particles decrease the amount of sunlight reaching the surface of the earth and lower average global temperatures.

Sheryl always expects special treatment wherever she goes because, after all, she is better than everyone else. She could care less how others feel and routinely expects people to worship her. These attributes are typical of ______.

Answers

Explanation:

it attributes to Being pride of herself

The elastic force acting on a 0.60 kg object on a spring is 1.2 N. If the distortion of the object is 0.025 m to the right, what is the spring constant?​

Answers

Answer:

Spring constant = 48 N/m

Explanation:

Given the following data;

Mass = 0.60 kg

Force = 1.2 N

Distortion = 0.025 m

To find the spring constant;

Mathematically, the force exerted on a spring to cause a distortion or an extension is given by the formula;

Force = spring constant * distortion

Substituting into the formula, we have;

1.2 = spring constant * 0.025

Spring constant = 1.2/0.025

Spring constant = 48 N/m

. A convertible moves toward you and then passes you; all the while, its loudspeakers are producing a sound. The speed of the car is a constant 9.30 m/s, and the speed of sound is 342 m/s. What is the ratio of the frequency you hear while the car is approaching to the frequency you hear while the car is moving away

Answers

Answer:

[tex]1.056[/tex]

Explanation:

v = Velocity of sound = 342 m/s

[tex]v_s[/tex] = Velocity of source of sound = 9.3 m/s

[tex]f_a[/tex] = Frequency when car is approaching

[tex]f_m[/tex] = Frequency when car is moving away

[tex]f_s[/tex] = Frequecy of source of sound

The required ratio is

[tex]\dfrac{f_a}{f_m}=\dfrac{\dfrac{v}{v-v_s}f_s}{\dfrac{v}{v+v_s}f_s}\\\Rightarrow \dfrac{f_a}{f_m}=\dfrac{v+v_s}{v-v_s}\\\Rightarrow \dfrac{f_a}{f_m}=\dfrac{342+9.3}{342-9.3}\\\Rightarrow \dfrac{f_a}{f_m}=1.056[/tex]

The ratio of the frequency you hear while the car is approaching to the frequency you hear while the car is moving away is [tex]1.056[/tex]

PLS HELP, WILL GIVE BRAINLIEST!!!
A piece of clay with a mass of 350 g is dropped to the floor from a height of 1.5 m (A). Calculate the KE and PE of the clay at

a. (A = 1.5 m).
b. (B = 70 cm), and
c. (C = 0 m, just before hitting the ground). d. Make an energy graph at each point​

Answers

Answer:

b bro it's b bro

space question 50 points
Explain how sun angle and seasons vary as you move away from the equator.

Answers

Seasonal change in the angle of sunlight, caused by the tilt of the Earth's axis, is the basic mechanism that results both in warmth of the weather and in length of the day.

Average speed is the rate at which an object is moving at a given instant. True or False.

Answers

Answer:

True

Explanation:

Average speed is the rate at which an object is moving at a given instant in time.

Answer: false.

Explanation: i’m pretty sure that’s instantaneous speed.

Will give brainliest!!

Adding a solute to a solvent ________ the boiling point of the solvent.

lowers

does not change

raises

doubles

Answers

Answer:

lowers :)

Explanation:

a wave raises a buoy twice every second and the crests of the incoming waves are 4m apart
what is the wavelength in meters?

Answers

You just said that the crests of the incoming waves are 4m apart.

That's it ! That's the wavelength. The distance between crests. It doesn't matter how often they sail past you.

The question I was expecting here: How fast are the waves traveling ?

That's (frequency)x(wavelength). 8 m/s.

plz help

In a pot of boiling water, what happens to the hot water at the bottom of the pot? What happens to the cold water at the top of the pot?​

Answers

Explanation:

First, the liquid on the bottom of the pot closest to the heat source starts to get hot; as it does, it rises. The rising hot water is replaced by the cooler, more dense water molecules. The water molecules in your pot continually exchange in this way, thanks to gravity, eventually warming the entire pot of liquid.

The water at the bottom of the pot becomes hot and it’s density decreases.Cold water could become water vapor.

A man kicks the 150-g ball such that it leaves the ground at an angle of 60° and strikes the ground at the same elevation a distance of 12 m away (14 points). Determine: (a). The velocity of the ball instantly after the man kicks the ball; (6 points) (b). Determine the impulse of his foot on the ball at A. (8 points) Neglect the impulse caused by the ball’s weight while it’s being kicked.

Answers

Answer:

[tex]313.92\ \text{m/s}[/tex]

[tex]47.088\ \text{kg m/s}[/tex]

Explanation:

m = Mass of ball = 150 g

[tex]\theta[/tex] = Angle of kick = [tex]60^{\circ}[/tex]

[tex]x[/tex] = Displacement of ball in x direction = 12 m

Range of projectile is given by

[tex]x=\dfrac{u\sin^2\theta}{2g}\\\Rightarrow u=\dfrac{2xg}{\sin^2\theta}\\\Rightarrow u=\dfrac{2\times 12\times 9.81}{\sin^260^{\circ}}\\\Rightarrow u=313.92\ \text{m/s}[/tex]

The velocity of the ball instantly after the man kicks the ball is [tex]313.92\ \text{m/s}[/tex]

Impulse is given by

[tex]J=mu\\\Rightarrow J=0.15\times 313.92\\\Rightarrow J=47.088\ \text{kg m/s}[/tex]

The impulse of his foot on the ball is [tex]47.088\ \text{kg m/s}[/tex].

pls help giving brainliest!
• Explain how Ohm's Law is like a river.
o What represents Voltage?
o What represents Current?
o What represents Resistance?​

Answers

Answer:

Pressure of water = Voltage

Flow rate of water = Current

Obstructions present in the river = Resistance

Explanation:

We can describe Ohm's Law by using the river analogy,

The flow of water from a mountain to lower parts can be considered as change from high potential to a lower potential.The flow of water can also be considered as flow of electrons, that is current in a circuitThere are also obstructions in rivers that can be considered as resistance in an electric circuit.

An astronomy class is so excited by the discovery of planets around other stars that they decide to do a library exhibit on the subject so that everyone in the school can learn about it. In this exhibit they want to pay tribute to both the astronomers of today who have done the work AND some of the scientists of the past whose work was essential to making the discoveries possible (and directly related to the techniques involved). Which of the following scientists of the past should definitely be included in the exhibit?
George Herbig  Ejnar Hertzsprung  Ptolemy 
Gerard Kuiper  Christian Doppler 

Answers

Answer:

Christian Doppler

Explanation:

The Scientist with the most significant contribution to the discovery of planets around other stars is Christian Doppler and his work that made this discovery possible is the Principle of  DOPPLER EFFECT

Christian Doppler was an Austrian scientist and physicist whose principle Doppler effect explained how observed frequency of light and sound waves are affected by a relative motion of both the source and detector

Tendons are, essentially, elastic cords stretched between two fixed ends; as such, they can support standing waves. These resonances can be undesirable. The Achilles tendon connects the heel with a muscle in the calf. A woman has a 20-cm long tendon with a cross-section area of 130 mm^2. The density of tendon tissue is 1100 kg/m^3.

Required:
For a reasonable tension of 600 , what will be the fundamental resonant frequency of her Achilles tendon?

Answers

Answer:

161.938 Hz

Explanation:

the computation of the fundamental resonant frequency is shown below

p = 1100 kg/m^3

A = 130 mm^2

= 130 ×10^-6 m^2

T = 600 N

L = 20 cm

= 0.2 m

Now the linear density of tendon is

=  1100 kg/m^3 ×  130 ×10^-6

= 0.143 kg/m

Now the wave of the string is

= √600  ÷ √0.143

= 64.775 m/s

Now finally the fundamental resonant frequency is

= 64.775 ÷ (2 × 0.2)

=161.938 Hz

a student throws a coin vertically downward frok the top of a building. the coin leaves the throwers hand with a speed of 15.0m/s. what is its speed after falling freely for 2.00s?​

Answers

Answer:

Final speed after 2 seconds = 34.6 m/s

Explanation:

Given:

Initial speed of coin (u) = 15 m/s

Time taken = 2 seconds

Find:

Final speed after 2 seconds

Computation:

Gravitational acceleration of earth = 9.8 m/s²

Using first equation of motion;

v = u + at

or

v = u + gt

where,

v = final velocity

u = initial velocity

g = Gravitational acceleration

t = time taken

v = 15 + 9.8(2)

v = 15 + 19.6

Final speed after 2 seconds = 34.6 m/s

Suppose that a particle accelerator is used to move two beams of particles in opposite directions. In a particular region, electrons move to the right at 4910 m/s and protons move to the left at 2583 m/s. The particles are evenly spaced with 0.0758 m between electrons and 0.0577 m between protons. Assuming that there are no collisions and that the interactions between the particles are negligible, what is the magnitude of the average current in this region

Answers

Answer:

The answer is "[tex]17.28 \times 10^{-14}\ A[/tex]"

Explanation:

Calculating the number of electrons passing in per second:

[tex]\to n_e = \frac{4910}{0.0758} = 6.4 \times 10^5[/tex]

Calculating the current in electron:

[tex]\to I_e = 6.4 \times 10^5 \times 1.6 \times 10^{-19} = 10.24 \times 10^{-14}\ A[/tex]

Calculating the number of protons passing in per second:

[tex]\to n_p = \frac{2583}{0.0577} = 4.4 \times 10^{4}[/tex]

Calculating the current in proton:

[tex]\to I_p = 4.4 \times 10^{4} \times 1.6 x 10^{-19} = 7.04 \times 10^{-14} \ A[/tex]

Calculating the total current:

[tex]\to I = I_p + I_e = 17.28 \times 10^{-14}\ A[/tex]

How does a sound wave's amplitude affect the sound we hear? How does a sound
wave's frequency affect the sound we hear?

Answers

Answer:

cause we hear differently

Explanation:

Answer:

As the amplitude of the sound wave increases, the intensity of the sound increases. Sounds with higher intensities are perceived to be louder. Relative sound intensities are often given in units named decibels (dB)

Compare the kinetic and potential energies of a 400 kg box being moved
horizontally by a forklift at a speed of 5 m/s. The box is at a height of 1 m.

Answers

Answer:

Kinetic energy is greater than the potential energy.

Explanation:

The potential energy stays constant because the height is not changing.  Potential energy = MGH, where m is the mass (400 kg), g is the acceleration due to gravity (9.8 m / sec2), and H is the height (1 m).  So the result is 400 * 9.8 * 1 = 3920 J

 

The kinetic energy = 1/2 mv2 = 0.5  * 400 kg * (5 m/sec)2 = 5000 J.  It also stays constant because the speed is not changing.

 

Therefore, the kinetic energy is greater than the potential energy.

19
What is the mass of a ball that is traveling 30 m/s and has 4.5 J of kinetic energy?
ave a GPF of 35512

Answers

Answer: The mass of ball is 10 grams.

Explanation:

Given : Kinetic energy = 4.5 J

Velocity = 30 m/s

The formula for Kinetic energy is as follows.

[tex]K.E = \frac{1}{2}mv^{2}[/tex]

where,

K.E = Kinetic energy

m = mass

v = velocity

Substitute the values into above formula as follows.

[tex]K.E = \frac{1}{2}mv^{2}\\4.5 J = \frac{1}{2} \times m \times (30 m/s)^{2}\\m = \frac{4.5 J \times 2}{900 m^2/s^2} (1 Js^{2} = kg m^{2})\\= 0.01 kg (1 kg = 1000 g)\\= 10 g[/tex]

Thus, we can conclude that the mass of ball is 10 grams.

Do anyone know this ?

Answers

Answer:

Distance is 100m, displacement is 0m

Explanation:

Distance is how much you travelled in total (100m)

Displacement is when you compare your final and initial positions.

It is usually Final position - Initial position.

Since you start and finish at the same point, it would be 0 - 0 = 0m

So the displacement is 0m.

Distance is 100 and displacement is 0

A house brick has a volume of 1900 cm³ and a weight in air of 80N.What is its apparent weight in water?The density of water is 1.00 g cm³?​

Answers

Answer:

61 N

Explanation:

We'll begin by calculating the mass of the brick when placed in water. This can be obtained as follow:

Volume of brick = 1900 cm³

Density of water = 1 g/cm³

Mass of brick in water =…?

Density = mass / volume

1 = mass of brick in water / 1900

Cross multiply

Mass of brick in water = 1 × 1900

Mass of brick in water = 1900 g

Next, we shall convert 1900 g to Kg.

1000 g = 1 Kg

Therefore,

1900 g = 1900 g × 1 Kg / 1000 g

1900 g = 1.9 Kg

Next, we shall determine the weight in water. This can be obtained as follow:

Mass (m) = 1.9 Kg

Acceleration due to gravity (g) = 10 m/s²

Weight (W) =?

W = m × g

W = 1.9 × 10

W = 19 N

Thus, the weight of the brick in water is 19 N.

Finally, we shall determine the apparent weight of the brick in water. This can be obtained as follow:

Weight in air = 80 N

Weight in water = 19 N

Apparent weight =?

Apparent weight = weight in air – weight in water

Apparent weight = 80 – 19

Apparent weight = 61 N

50POINTS PLEASE HELP SPACE QUESTION
Explain how and why seasons vary in the Northern and Southern Hemispheres.

Answers

Regardless of the time of year, the northern and southern hemispheres always experience opposite seasons. This is because during summer or winter, one part of the planet is more directly exposed to the rays of the Sun than the other, and this exposure alternates as the Earth revolves in its orbit.

The seasons in the Northern Hemisphere are the opposite of those in the Southern Hemisphere. Seasons occur because Earth is tilted on its axis relative to the orbital plane, the invisible, flat disc where most objects in the solar system orbit the sun.

Suppose that you'd like to find out if a distant star is moving relative to the earth. The star is much too far away to detect any change in its brightness as it moves toward or away from the earth. Instead we can use the Doppler effect to determine its relative speed. For this problem we are going to look at the spectral lines from hydrogen, specifically the one with a wavelength of 656.46 nm.

Required:
What is V(star) , the speed at which the star is moving relative to the earth?

Answers

Answer:

The speed will be "18km/s". A further explanation is given below.

Explanation:

According to the question, the values are:

Wavelength,

[tex]\lambda = 656.46 \ nm[/tex]

[tex]\Delta \lambda = 0.04[/tex]

[tex]c=3\times 10^8[/tex]

As we know,

⇒  [tex]\frac{\Delta \lambda}{\lambda} =\frac{v}{c}[/tex]

On substituting the values, we get

⇒  [tex]\frac{656.46}{0.04} =\frac{v}{3\times 10^8}[/tex]

⇒         [tex]v=\frac{656.46}{0.04} (3\times 10^8)[/tex]

⇒            [tex]=16411.5\times 3\times 10^8[/tex]

⇒            [tex]=18280 \ m/s[/tex]

or,

⇒            [tex]=18 \ km/s[/tex]

The  speed at which the star is moving relative to the earth is 18 km/s

Calculation of the speed:

Since the wavelength is  656.46 nm.

And, Δλ=0.04nm

Here Wavelength should represent the distance between the same points in the cycles of a signal propagated in space or it should be along a wire.

Now the speed should be

[tex]= 0.04 \div 656.46 \times 3 \times 10^8[/tex]

= 1820m/s

= 18 km.s

Therefore, The  speed at which the star is moving relative to the earth is 18 km/s

learn more about speed here: https://brainly.com/question/24692367

Rudy plans to conduct an experiment using three rosebushes of the same variety and size. His hypothesis is that the plant
receiving the most sunlight at the end of three months will show the most growth. In his plan below, he has listed how much
water, fertilizer, and sunlight each plant will receive. Why is his experiment flawed?

Answers

Answer: B) He has too many independent variables.

Explanation: Nothing in the experiment is a constant or being measured.

a large heavy truck and a baby carriage roll down a hill. Neglecting friction, at the bottom of the hill, the baby carriage will likely have A. less momentum, B. about the same momentum, C. more momentum or D. double the momentum of the truck​

Answers

Answer:

please give me brainlist and follow

Explanation:

At the bottom of the hill, the baby carriage will likely have less momentum Therefore, option D is correct. Solution: ... Therefore, at the bottom of the hill, the heavy truck will have more momentum and baby carriage will have less momentum.

Someone please help me! And I will mark you as brainlist!!

1) A ball with a mass of 2.0 kg is thrown upward 1.2m calculate its gravitational potential energy into two significant figures. Gravity = 9.8 N/kg

• 2.4 J
• 1.4 J
• 120 J
• 24 J


2) Translation kinetic energy is defined as the energy of a system due to the motion of the system’s...

• center of mass
• axis of symmetry
• molecules
• rotational movement

PLEASE HELP!!

Answers

Answer:

1. G.P.E = 24 J

2. center of mass

Explanation:

Given the following data;

Mass = 2kg

Height, h = 1.2m

Acceleration due to gravity = 9.8 N/kg or m/s².

To find the gravitational potential energy;

Gravitational potential energy (GPE) is an energy possessed by an object or body due to its position above the earth.

Mathematically, gravitational potential energy is given by the formula;

[tex] G.P.E = mgh[/tex]

Where;

G.P.E represents potential energy measured in Joules.m represents the mass of an object. g represents acceleration due to gravity measured in meters per seconds square. h represents the height measured in meters.

Substituting into the formula, we have;

[tex] G.P.E = 2*1.2*9.8 [/tex]

G.P.E = 23.52 to 2 S.F = 24 Joules.

Translation kinetic energy is defined as the energy of a system due to the motion of the system’s center of mass. The center of mass is typically where the mass of the object or particle is concentrated.

Some fundamental particles such as quarks (and some leptons, such as the electron) have an electric charge and use photons as mediating particles to communicate with other particles with electric charge. Similarly, quarks, identified by their color charge, use a mediating particle to interact with other particles with color charge, that is, other quarks. What is the particle that mediates interactions among quarks

Answers

Answer: hello the options to your question is missing below are the missing

options :

the W boson the gluon the Z boson the tau particle

answer : The Gluon ( option 2 )

Explanation:

The particle that mediates the interactions between quarks is known as the Gluon.

Gluon is known as an elementary particle that acts as the exchange particle between quarks. It's function is similar to the activity involving the exchange of photons in the electromagnetic force involving  two charged particles

On the graph of voltage versus current, how do the resistors compare?

Answers

It would e letter D hope you have a good day
Other Questions
The multiplication rule of counting indicates that the product of the outcomes of each event gives the total number of possible outcomes for the series of all 5 events. There are 5 outcomes for the first city, 4 outcomes for second city, 3 outcomes for the third city, 2 outcomes for the fourth city, and 1 outcome for the final city. Write the product of the outcomes.(first city) (second city) (third city) (fourth city) (final city) = 5 4 3 2 Note that factorial notation can be used here, since we have the product of consecutive decreasing counting numbers. Recall that n! = n(n 1)(n 2) 1.Here, n = 5 and 5! = 5 4 3 2 Step 3Multiply to find the total number of possible outcomes.5! = 5 4 3 2 1 = ?So by the multiplication rule of counting, the sales representative has different choices for the order in which to visit the cities. Which is bigger? 9^27 or 3^81? Hint: can you write 9^27? Evaluate 32. (4 + 2) - 1 + (2.3)A1523C54D57 qu nmero entero est entre -2 y 5 Write a summary of the ways in which modern, international city life is taking over inBangkok and of the signs of the past that remain. during a debate Bonnie used 9 minutes to present her opinion 6 minutes to rebut the opposing opinion and 5 minutes to summarize what percent of the time did she spend summarizing xy + 4y - 2x - 8 thanks Match the spanish idioms in the first colums with their english equivalent in the second colum. The scatter plot shows how much puppy weighs within a certain time period. about how much did the puppy gain during this time period? The mean of four numbers is 7. Three of the numbers are 5, 7, and 7. What is the fourth number? Show your work. The following financial information is available on Rawls Manufacturing Company: Current per share market price $48.00 Current per share dividend $3.50 Current per share earnings $6.00 Beta 1.1 Expected rate of return on market 12.0% Risk-free rate 6.0% Expected long-term growth rate 5.0% Rawls can issue new common stock to net the company $44 per share. Determine the cost of external equity capital using the dividend capitalization model approach. (Compute answer to the nearest 0.1%.) Tom scored double what Ali scored. Bob scored 6 less then Ali. If together they scored 60 points. How many points did they each score? The combustion of ethene,C2H4,is an exothermic reaction. Use the information below to determine the amount of energy given off when 1000g of ethene is conbusted C2H4+3 O2-> 2CO2 + H20 Which one is not a function? DONT USE THE LINK SCAM, I really need help What does Mrs Morningstar say that Sancho and Bolsa couldn't find in a porta-potty? A.toilet paperB.a polar bear C.an elephant plz plz plz help me ill give brainliest i just really need helpWhich rectangular prism has a surface area of 62 square units? [Note: Art is not drawn to scale.]A rectangular prism with a length of 5, width of 3, and height of 1.A rectangular prism with a length of 2, width of 2, and height of 6.A rectangular prism with a length of 5, width of 3, and height of 2.A rectangular prism with a length of 6, width of 2, and height of 4. which statement best describes a chemical property related to the particles that make up a materialA. nickel is a good conductor of electricity because the metallic bonds between its atoms allow electrons to move freely.B. demand is a hard substance because its atoms are joined together by covalent bonds.C. metallic bonds between its ions cause silver to be a highly malleable material.D. chlorine is highly reactive with other elements because its atoms have 7 valence eletrons. The cost of materials transferred into the Rolling Department of Keystone Steel Company is $510,000 from the Casting Department. The conversion cost for the period in the Rolling Department is $81,200 ($54,700 factory overhead applied and $26,500 direct labor). The total cost transferred to Finished Goods for the period was $553,200. The Rolling Department had a beginning inventory of $25,000. Required:a. Journalize the cost of transferred-in materials.b. Journalize the conversion costs.c. Journalize the costs transferred out to Finished Goods. d. Journalize the costs transferred out to Finished Goods. e. Determine the balance of Work in ProcessRolling at the end of the period. How to slove this question please give a full explanation:)