Consider four different samples: aqueous LiBr, molten LiBr, aqueous LiF, and molten LiF. Current run through each sample produces one of the following products at the anode: liquid bromine, fluorine gas, or oxygen gas. Match each sample to its anodic product from aqueous LiBr, Molten LiBr, aqueous LiF, and molten LiFA. Liquid bromine,
B. Fluorine gas,
C. oxygen gas

Answer:

Following are the responses to the given question:

Explanation:

In the given question the OH could be generated as the H-bond with both the N (nitrogen), which is used to place its N as the partially positive value(+). It is used to simplifies the addition for either its  AA with the imine C. In the above H-bond, the w N is not required as the possibility to use the OCH3

Answer: When fuels are burned, the chemical energy that is released can be used to generate another form of energy, such as heat, light, motion, or electricity. This is called combustion.

Explanation:

The chemical energy present in fuels actually releases when these fuels are burned or by combustion.

Hence when fuels are burned, the chemical energy that is released can be used to generate another form of energy, such as heat, light, motion, or electricity. This is called combustion.

For example, gasoline present in vehicles burns and undergoes chemical change which is then converted into thermal energy. This thermal energy then converts into mechanical energy due to which car moves.

Thus, we can conclude that when fuels are burned, the chemical energy that is released can be used to generate another form of energy, such as heat, light, motion, or electricity. This is called combustion.

here's your answer..

Answer:

All functional groups in organic chemistry

Functional groups include: hydroxyl, methyl, carbonyl, carboxyl, amino, phosphate, and sulfhydryl.

Hope this helps Have a good day

Answer:

0.960 mol of Ag

Explanation:

Mg(s) + 2AgNO3(aq) → Mg(NO3)2(aq) + 2Ag(s)

1.00 mol of Mg ---- 2.00 mol of Ag

0.480 mol of Mg ---- x

x = (0.480×2)/1 = 0.960 mol of Ag

Answer:

A force is a push or pull that can cause an object to move, stop, or change speed or direction.

I think it's Force.

Answer:100

Explanation:

Answer:

don't know really and don't know at alll

Answer:

fhkigfkh mlfhg,hgljh

Explanation:

l,dlflfk,jhm,gkhmtyhm,;tgjnh

Answer:

In the question the mass has two significant figures; thus the mass of O2 released would be 4.0 g (two significant figures). 122.55 g of KClO3 yields 3*32 g of O2

Explanation:

Explanation:

[tex] = 2.5\% \times 2000 \\ = \frac{2.5}{100} \times 2000 \\ = 50 \: g[/tex]

Answer:

22.1 ppm

Explanation:

The equation of the reaction is;

Pb2+ (aq)  + 2NaI(s) ------>PbI2(s) + 2 Na^2+

Mass of precipitate =  55.1x10-3 g

Number of moles of precipitate =  55.1x10-3 g/461.01 g/mol = 1.2 * 10^-4 moles

1 mole of  Pb2+  yields 1 mole of PbI2

Hence 1.2 * 10^-4 moles of  Pb2+  also yields  1.2 * 10^-4 moles of PbI2.

Hence mass of Pb2+ present = 1.2 * 10^-4 moles * 207 g/mol = 0.025 g or 25 mg

Mass of solution = Density of solution * volume of solution

Mass of solution = 1.00 kg/L * 1.13 L

Mass of solution = 1.13 Kg

Concentration in mg/Kg(ppm) = mass of solute/mass of solution

= 25 mg/1.13 kg

= 22.1 ppm

Answer:

TRUE ,hope it helped you

Explanation:

Answer:

A. Orange light

Explanation:

According to the band spectrum of white light ( ROYGBIV )

Answer:

I think it blue light is higher

Answer:

The molecular formula of the compound is C10H16O.

Explanation:

Based on the given information, the mass of an unknown compound is 152 mg or 0.152 g, which was dissolved to produce 75 ml of solution.

The osmotic pressure of the solution is 0.328 atm at 27 degrees C or 300 K.

The formula of osmotic pressure is,

P = CRT

Now putting the values in the formula we get,

0.328 = C*0.0821*300

C = 0.013317

C = (mass/molecular mass) * (1000/volume of solution in ml)

0.013317 = (0.152/Molecular mass) * (1000/75)

Molecular mass = 152.186

C mass = 152.186 * 0.789 = 120.07 grams

C mole = 120.07/12 = 10

H mass = 152.186 * 0.1059 = 16.11 grams

H mole = 16.11/1 = 16

O mass = 152.186 - 120.07 - 16.116 = 16 grams

O mole = 16/16 = 1

Thus, the molecular formula of the compound will be,

C10H16O

The given question is incomplete, the complete question is:

A chemist adds 35.0mL of a 6.19 * 10^−4/mmol magnesium fluorideMgF2 solution to a reaction flask. Calculate the mass in micrograms of magnesium fluoride the chemist has added to the flask. Round your answer to

3 significant digits.

Answer:

The correct answer is 1.35 microgram.

Explanation:

Based on the given information,

The volume of magnesium fluoride given is 35 ml, and the concentration of magnesium fluoride is 6.19 × 10⁻⁴ mmol/L.

Now the moles of MgF₂ can be determined by using the formula,

Moles = Concentration × Volume

Moles of MgF₂ = Concentration of MgF₂ × Volume of MgF₂

= 6.19 × 10⁻⁴ mmol/L × 35 ml × L/1000 ml

= 217 × 10⁻⁷ mmol

The molecular mass of magnesium fluoride is 62.3 gram per mole

Thus, the mass of MgF₂ is,

= 217 × 10⁻⁷ mmol × 62.3 g/mol

= 13500 × 10⁻⁷ mg

= 1.35 microgram

Answer:

The brick has more matter because it has more mass.

Explanation:

Atoms of the same elements differing in the number of neutrons in their nuclei are known as isotopes. Thus, isotopes of an element have the same atomic number but different atomic mass number. Isotopes of an element have similar chemical properties but different physical properties.

Answer:

Answer: The correct answer is actually: The final temperature is 400 K, while volume is kept constant.

Explanation: Got it right on test!

Given :

Molarity of HCl solution, M = 0.686 M.

Number of moles, n = 0.037 moles.

To Find :

The volume of solution.

Solution :

We know, molarity is given by :

[tex]M = \dfrac{Number \ of \ moles \ of \ solute}{Volume \ in \ liter}\\\\0.686 = \dfrac{0.037}{V}\\\\V = \dfrac{0.037}{0.686}\ L\\\\V = 0.053935 \ L \\\\V = 53.94 \ ml[/tex]

Hence, this is the required solution.

Answer:

Explanation:

photosynthesis

the given chemical reaction is photosynthesis.

During photosynthesis carbon dioxide absorbed by plants reacts with water in presence of sunlight to give glucose and oxygen.

Answer:

See explanation and image attached

Explanation:

Hydrogen peroxide is made up of two atoms of hydrogen and two atoms of oxygen as shown in the image attached.

The two oxygen atoms are joined together by a single covalent bond and each of the oxygen atoms are bonded to one hydrogen atom each.

There are two lone pairs on each of the oxygen atoms.

The Lewis(dot) structure for hydrogen peroxide is shown in the image attached to this answer.

Answer: The volume of given container is 3.83 L.

Explanation:

Given: Mass of [tex]H_{2}[/tex] = 0.224 g

Mass of [tex]N_{2}[/tex] = 1.06 g

Mass of Ar = 0.834 g

Since, moles is the mass of a substance divided by its molar mass. Therefore, moles of given substances present in the mixture are as follows.

Moles of  [tex]H_{2}[/tex] are:

[tex]Moles = \frac{mass}{molar mass}\\= \frac{0.224 g}{2 g/mol}\\= 0.112 mol[/tex]

Moles of [tex]N_{2}[/tex] are:

[tex]Moles = \frac{mass}{molar mass}\\= \frac{1.06 g}{28 g/mol}\\= 0.038 mol[/tex]

Moles of Ar are:

[tex]Moles = \frac{mass}{molar mass}\\= \frac{0.834 g}{40 g/mol}\\= 0.021 mol[/tex]

Total moles = (0.112 + 0.038 + 0.021) mol = 0.171 mol

Now, using ideal gas equation the volume is calculated as follows.

PV = nRT

where,

P = pressure

V = volume

n = no. of moles

R = gas constant = 0.0821 L atm/mol K

T = temperature

Substitute the values into above formula as follows.

[tex]V = \frac{nRT}{P}\\= \frac{0.171 mol \times 0.0821 L atm/mol K \times 273 K}{1 atm}\\= 3.83 L[/tex]

Thus, we can conclude that the volume of given container is 3.83 L.

Answer:

Also, the number of atoms in a reaction remains the same. Mass cannot be created or destroyed in a chemical reaction. The law of conservation of mass states that the total mass of substances taking part in a chemical reaction is conserved during the reaction.

Answer:

The correct answer is - option D. (check image)

Explanation:

Alkynes and alkenes both decolorized bromine in carbon tetrachloride. The absorption of the IR at about 3300 cm-1 for the X here that are found in the terminal alkynes absorption range only. In presence of excess hydrogen and a nickel catalyst, x gives the  2-methyl pentane.

The most likely structure for X is: CH3-CH3-ch-CH2-C≡CH

A compound having double and triple bonds is called alkenes and alkynes. The most likely structure of the compound will be 2 -methyl -4- hexyne.

The molecular formula represents the chemical atomic proportions of the compound or the molecule through the symbols, and numbers.

Bromine is decolorized by the alkynes and alkenes. The absorption range is followed by the terminal alkynes and in excess hydrogen yields 2-methyl pentane.

Therefore, 2 - methyl - 4 - hexyne is most likely to be X.

Learn more about molecular formulas here:

https://brainly.com/question/9669153

Two airplanes are flying in the sky in such a way that the gravitational attractions between them decreases. The planes must be flying away from each other. Hence option A is correct.

Gravitational attraction is defined as a basic interaction that pulls everything with mass or energy in the same direction. All objects are subject to gravitational interactions, the strength of which is directly inversely proportional to the product of their masses. The size of an object and the separation between the objects have an impact on gravity.

In order to reduce the gravitational pull, two planes are flying in the sky. There must be a directionality between the aircraft. No matter what is in between the two bodies, there will still be gravitational pull. As a result, even if the medium between the two bodies changed, the gravitational force between them would not.

Thus, two airplanes are flying in the sky in such a way that the gravitational attractions between them decreases. The planes must be flying away from each other. Hence option A is correct.

To learn more about gravitational attraction, refer to the link below:

https://brainly.com/question/19822389

#SPJ2