Convert 1.65 moles of nitrogen gas at STP to liters.

What is the coefficient of the scientific notation answer ? What is the exponent of the scientific notation answer ? How many significant figures are there in the answer ? What is the right most significant figure in the answer ?

There are four primary routes through which a chemical may enter the body:breathing (inhalation) (breathing)Contact with the skin or the eyes swallowing and injecting

Chemicals must reach your body in order to harm your health.The three basic "routes of exposure," or methods by which a chemical enters your body, are as follows.BREATHING

The method via which a person may come into touch with a dangerous material is referred to as an exposure pathway.There are three primary exposure routes: direct touch, ingestion, and inhalation.Measuring the quantity of the dangerous material just at point of contact allows for the determination of the degree and extent of exposure.

To know more about chemical exposure visit:
https://brainly.com/question/29548487

#SPJ4

Answer:

UNsaturated

Explanation:

Eventually by adding solute you will reach a point where no more will dissolve....then it is saturated

Protons All Elements' Neutrons & Electrons (List + Images) Atomic number: all protons, neutrons, and electrons 5 Boron is made up of 5 protons, 6 neutrons, and 5 electrons.

6 Carbon consists of 6 protons, 6 neutrons, and 6 electrons. Protons, neutrons, and electrons total seven for nitrogen. Oxygen contains 8 protons, 8 neutrons, and 8 electrons. 34 more rows

Protons All Elements' Neutrons & Electrons (List + Images) 1 Atomic number All Elements Have Two Electrons. Diagram of 3 Shells 4 Neon Magnesium (5) Aluminum 6 Phosphorus 7 Sulfur 8 9 Argon Potassium 10 More things...

All elements' protons, neutrons, and electrons Diagram of a shell One proton, zero neutrons, and one electron make up hydrogen. Helium contains two protons, two neutrons, and two electrons.

To learn more about electrons please click on below link

https://brainly.com/question/1255220

#SPJ4

Yes, Scope 3 emissions include emissions that are a result of a Customer's activities but are not under its direct control.

These emissions can be caused by a wide range of activities, such as the use of products and services by customers. Therefore, customers' GHG emissions from using a company's products or services would be included in the company's Scope 3 emissions. For example, if a car manufacturer includes the GHG emissions from the use of its cars by customers in its Scope 3 emissions, this would include the emissions from the fuel burned by the customers while driving the cars.

Learn more about Scope 3 Emission here:

https://brainly.com/question/29546967

#SPJ4

Yes, 20 grams of salt can be dissolved in 100 mL of water.

Solubility is the ability of a substance to dissolve in a liquid or to be dispersed in another substance. It is a physical property of a substance that determines how much of a solute can be dissolved in a particular solvent. Solubility is a measure of the maximum amount of solute that can be dissolved in a given solvent at a particular temperature and pressure. Solubility is an important factor to consider when formulating products as it affects the concentration of the active ingredient or solute in the end-product.

The amount of salt that can be dissolved in a given amount of water is determined by the solubility of the salt. The solubility of salt in water is typically around 357 grams per liter, so 20 grams of salt can be dissolved in approximately 56 milliliters of water.

To know more about solubility click-

https://brainly.com/question/23946616

#SPJ4

To design a synthesis of acetophenone from benzyl alcohol and methanolBenzyl alcohol is converted to Benzaldehyde using PCC. Mean while methanol was converted to methyl bromide and Generated Grignard reagent.

Benzaldehyde react with Grignard reagent to give secondary alcohol which is oxidized to Acetophenone by PCC.benzaldehyde and methylmagnesium bromide are the appropriate starting material for AcetophenoneMethanol, the most basic alcohol (CH3OH), is a chemical key component in hundreds of everyday items such as plastics, paints, automobile parts, and building supplies. Methanol is also a clean energy source of information that is used to power cars, trucks, buses, ships, fuel cells, boilers, and cook stoves. . Chronic methanol vapour poisoning can cause eye inflammation (conjunctivitis), recurrent cramps, giddiness, insomnia, stomach disruptions, and visual failure.

To learn more about Benzaldehyde here:

https://brainly.com/question/28146845

#SPJ4

a. The acid on the left is H₂O and its conjugate base on the right is OH⁻.

b. The base on the left is HONH₂ and its conjugate acid on the right is HONH₃⁺.

Chemical reactions between acids and bases always produce its conjugate base and its conjugate acid. According to Bronsted-Lowry

HONH₂ + H₂O ⇄ HONH₃⁺ + OH⁻

Learn more about conjugate acid and base here: https://brainly.com/question/12584785

#SPJ4

To solve this type of question we must know the concept of rate law. Therefore, 8.242g will be left after 32 days. The kinetic for the decay of Plutonium is of first order kinetics.

There are two kinds of rate law in chemical kinetics one is differential rate law and other is integrated rate law.

The rate law for first order kinetics is

K=(2.303/T)×log(a/a-x)

half life=0.693/K

Where

k - rate constant

t - time passed by the sample

a - initial amount of the reactant

a-x - amount left after the decay process

K=0.693/half life

K=0.693/ 8

 =0.086

0.086=(2.303/ 32)×log( 136/a-x)

0.086=0.07×log( 136/a-x)

1.22=log( 136/a-x)

136/a-x=16.5

a-x=8.242g

Therefore, 8.242g will be left after 32 days.

Learn more about rate law for first order kinetics, here:

https://brainly.com/question/12593974

#SPJ1

This is due to the fact that NaCl molecules are much smaller than glucose molecules.

Molecules are the smallest particles of a substance that can still be identified as that substance. They are composed of two or more atoms that are chemically bonded together. Molecules are the fundamental building blocks of all matter, both living and nonliving. The number and type of atoms in a molecule determine its chemical identity.

The smaller molecules of NaCl can fit into the water molecules more easily than the larger glucose molecules, causing more water molecules to be displaced and therefore a higher freezing point.

To learn more about molecules
https://brainly.com/question/26044300
#SPJ4

NaCl, as an electrolyte, dissociates almost completely to give 'Na(+) and Cl(-)' ions, whereas glucose, as a non-electrolyte .

A solute's freezing point is completely based on its concentration, not on its mass or chemical composition. A typical instance of freezing point depression is when salt reduces the freezing point of water in cold weather.

Frost point When solute molecules are added to a solvent, a colliding phenomenon known as depression results.

As a result, the freezing temperatures of all solutions are lower than those of pure solvents and are inversely related to the solute's molality.

study the freezing point.

Visit

https://brainly.com/question/9530198

#SPJ4

As a result, 5.7 of calcium nitrate contains 1.02 × 10²⁵ nitrate ions..

Called Norgessalpeter, calcium nitrate is an inorganic substance having the formula Ca(NO3)2x. The unusual anhydrous chemical absorbs moisture from the environment to form the tetrahydrate. Salts can be found in two different states: hydrated and anhydrous. Calcium nitrate is a chemical compound that dissolves in water and has several applications, including the treatment of water, fertilizers, concrete, and cold packs. Calcium nitrate is mostly utilized in wastewater treatment to eliminate hydrogen sulfide-related odors and guard against oxygen shortage.

Calcium nitrate is a chemical compound that dissolves in water and has several applications, including the treatment of water, fertilizers, concrete, and cold packs. Calcium nitrate is mostly utilized in wastewater treatment to eliminate hydrogen sulfide-related odors and guard against oxygen shortage.

Lethargy, muscle weakness, vomiting, nausea, and constipation are all signs of hypercalcemia. Some calcium salts irritate the digestive tract. Dermal irritation may result from even brief skin contact with caustic calcium salts.

1 mole of Ca(NO₃)₂ contains = 6.022 × 10²³ formula Units

So,

5.7 mole of Ca(NO₃)₂ will contain = X Formula Units

Solving for X,

X = (5.7 mol × 6.022 × 10²³ formula units) ÷ 1 mol

X = 3.43 × 10²⁴ Formula Units

As discussed,

1 Formula Unit of Ca(NO₃)₂ contains = 3 Ions

So,

3.43 × 10²⁴ Formula units will contain = X ions

Solving for X,

X = (3.43 × 10²⁴ Formula Unit × 3 Ions) ÷ 1 Formula Unit

X = 1.02 × 10²⁵ Ions

To know more about Calcium Nitrate visit:

https://brainly.com/question/11567557

#SPJ1

Specific Heat of the metal will be = 4.184 J/C

Mass of metal = 28 g

Mass of water = 28 g

Rise in temperature = 23.8 - 19 = 4.8 C

Specific heat of water = 4.184 J/C

Let the specific heat of metal =S

The heat released by metal =mass of metal * specific heat of metal * Change in temperature

[tex]& =28\times S \times 4.8{ }^{\circ} \mathrm{C} \\& =134.4 S^{\circ} \mathrm{C}[/tex]

Heat absorbed by water = mass of water x specific heat of water x change in temp. [tex]=28 \times 4.184 \times 4.8=562.3296 J[/tex]

Using the principal of Caloriemeter:

We have, Heat released by metal = Heat absorbed by water

134.4S = 562.3296 =>4.184 J/C

For similar question on Specific heat:

https://brainly.com/question/21406849

#SPJ4

The correct question should be:

if we are heated a metal with 28g mass then we add it in a coffee cup with 28g water. the water temperature raised from 19 degree to 23.8 oc. what was the specific heat of the metal. the water specific heat of water is 4.184 j/g oc.

For work to be accomplished, an object must move in the same direction as the applied force.

Work in physics refers to the measure of energy expended in moving an object; most commonly, force times distance.

It is said that no work is done if the object does not move. When a force acts upon an object to cause a displacement (directional distance) of the object, it is said that work was done upon the object.

In order for work to be done, the object must move in the same direction as the force being applied to it.

Applied force is the force which is applied to an object by another object. For example, a person pushing a barrel is an example of applied force. When the person pushes the barrel then there is an applied force acting upon the barrel.

Therefore, the correct answers have been inserted into the blank in the main answer section.

Learn more about work at: https://brainly.com/question/2750803

#SPJ1

The first structure is ketotetrose.

The second structure is ketohexose.

The third structure is aldohexose.

Monosaccharides are the most fundamental form of sugar and are the monomers from which all other types of carbohydrates are produced. They are also frequently referred to as simple sugars. In addition to this, they are the most basic form of sugar. The majority of the time, these compounds have a crystalline form, are white in color, and are soluble in water. Despite their common name, monosaccharides are not all sugars. Only certain monosaccharides have a flavor that can be described as sweet. The structure of the great majority of monosaccharides can be represented mathematically as CnH₂nOn. disaccharides and polysaccharides are created from monosaccharides, which are the foundational building blocks of carbohydrates. Sucrose, most commonly referred to as table sugar, is a disaccharide.

The complete question is attached as an image.

Want to know more about monosaccharides visit the link which is given below;

https://brainly.com/question/13416862

#SPJ4

1.567 g of solute is needed to make 3450 ml of a 2.25 M solution of Ca(NO3)2.

The amount of a substance in a specific volume of solution is known as its molarity (M). The number of moles of a solute per liter of a solution is known as molarity. The molar concentration of a solution is another name for molarity.

Molarity (M), which is determined by dividing the solute's mass in moles by the volume of the solution in liters, is the most widely used unit to express solution concentration: liters of solution/moles of solute equals M. One liter of a solution with a 1.00 molar concentration (1.00 M) contains 1.00 moles of solute.

No. of moles of NO₃⁻ = (0.1528 mol/L) × (125.00/1000 L) = 0.0191 mol

Each mole of Ca(NO₃)₂ contains 2 moles of NO₃⁻.

No. of moles of Ca(NO₃)₂ = (0.0191 mol) × (1/2) = 0.00955 mol

Molar mass of Ca(NO₃)₂ = (40.078 + 14.007×2 + 15.999×6) g/mol = 164.086 g/mol

Mass of Ca(NO₃)₂ required = (0.00955 mol) × (164.086 g/mol) = 1.567 g

Learn more about Molarity here:

brainly.com/question/8732513

#SPJ1

2Al(OH)3 + 3H₂ →2AI + 6H₂O , 2 moles of Al(OH)3 give ,3 moles of H₂O. so, 100gm of  Al(OH)3 gives 300 gm of H₂O.

Endothermic chemical processes are those that generally absorb (or use) energy. When bonds in the reactants are broken in endothermic reactions, more energy is absorbed than is released when new bonds are created in the products.

Not applicable, (also known as N/A), is a written acronym for not applicable that is used on forms when you are unable to provide a relevant (i.e., answer the question) response. Related words and phrases are part of the SMART Vocabulary. undesirable and inappropriate. amiss.

Learn more about redox reaction here :

https://brainly.com/question/13293425

#SPJ1

Answer:

Well lithium is a metal and chlorine is a nonmetal. Therefore this is most likely going to be ionic

Electron geometry is provided by four electron pair pairs. The lone pair would have molecular geometry and would result in lone pair-bonded pair repulsions.

Tetrahedral geometry is the four-electron pair geometry.

Trigonal bipyramidal geometry with a four-electron pair and a single pair

(b). Electron geometry is created by five pairs of electrons. In order to reduce lone pair-bonded pair repulsions, the lone pair occupies an equatorial position, and the molecule would have molecular geometry.

Trigonal bipyramidal geometry is the five-electron pair's geometry.

See-saw geometry is the geometry with a five-electron pair and a single pair.

(c). The geometry of the electron is made up of six pairs. To reduce lone pair-lone pair repulsions, the two lone pairs would be in opposing locations, and the molecule would have molecular geometry.

Octahedral geometry is the geometry with the six electron pairs.

To learn more about Electron geometry please click on below link

https://brainly.com/question/7558603

#SPJ4

Parabola is line formed from fixed points on a plane curve.

Parabola is described as a plane curve generated by a point moving so that its distance from a fixed point is equal to its distance from a fixed line and the intersection between a right circular cone and a plane parallel to an element of the cone.

The name "parabola" is given due to Apollonius, who discovered many properties of conic sections. It means "application", referring to "application of areas" concept, which has a connection with this curve, as Apollonius had proved. The focus–directrix property of the parabola and other conic sections exists due to Pappus.

Learn more about parabola from the link given below.

https://brainly.com/question/21685473

#SPJ4

The given image represents the deletion kind of mutation. Therefore, option (A) is correct.

In genetics, a deletion can be described as a mutation in which a part of a chromosome or a sequence of DNA is left while DNA replication. From a single base to an entire piece of chromosome any number of nucleotides can be deleted.

Some chromosomes have weak spots where breaks take place which results in the deletion of a part of the chromosome. The separation can be induced by heat, viruses, radiation, and chemicals. When a chromosome breaks, the missing piece of a chromosome is known as deletion.

The single base deletion mutations take place by a single base flipping in the template DNA, followed by DNA strand slippage.

Learn more about deletion, here:

https://brainly.com/question/26919766

#SPJ1

Answer:

An exposure limit is a legal or upper or lower level used as a safety measure to prevent health and safety risks caused by excessive exposure to a poisonous or harmful chemical. Exposure limits are simply the limitations established for substances that endanger human life and/or health.

Explanation:

After that, the speeds of the molecules are calculated at the two different temperatures as given in the question and then, the ratio is calculated by dividing.

Here, T is the temperature,

         m is the mass of the molecules and

         R is the Gas constant.

Let's taken an example of the two temperatures are as follows:

[tex]T_{1}[/tex]=270K

[tex]T_{2}[/tex]=30K

We know that the root mean square speed of the molecules is given as:

 [tex]V_{rms} = \sqrt{\frac{3RT}{M} }[/tex]

Putting the values of the temperatures and calculating the root mean square speeds of the molecules:

[tex]V_{rms1} = \sqrt[]{\frac{3R*270}{M} }[/tex]

[tex]V_{rms2} = \sqrt{\frac{3R*30}{M} }[/tex]

Dividing the above two root mean square speed equations in order to get the ratio of the two, we get,

⇒ [tex]\frac{V_{rms1} }{V_{rms2} } = \frac{\sqrt{\frac{3R*270}{M} } }{\sqrt{\frac{3R*30}{M} } }[/tex]

⇒ [tex]\frac{V_{rms1} }{V_{rms2} } = \sqrt{\frac{9}{1} }[/tex]

⇒ [tex]\frac{V_{rms1} }{V_{rms2} } = \frac{3}{1}[/tex]

Hence, the ratio of the root mean square speeds of the molecules of an ideal gas at 270K and 30K is 3:1.

Note: It is important to note that the root-mean-square speed is the measure of the speed of particles in a gas, defined as the square root of the average velocity-squared of the molecules in a gas. The mass and the Gas constant values for a particular gas remain the same and only temperature is the variant.

To know more about root mean square speeds, check:

https://brainly.com/question/13095222

#SPJ4

The simplest response is that atoms are attempting to enter the most stable (lowest-energy) state possible. When an atom meets the octet rule or forms chemical bonds, many of them become stable.

The attraction between two or more atoms that enables them to combine to produce a stable chemical compound is known as chemical bonding. Chemical bonds can have many different types, but covalent and ionic bonds are the most well-known. When one atom has less energy, the other has enough thanks to these bonds.

The valence electrons are the ones in charge of forming chemical bonds. Atoms trade electrons to form chemical bonds. Ionic and covalent bonds are the two basic types of bonding. When two atoms with different electronegativity join together, ionic connections are formed.

Learn more about chemical bonding here:

brainly.com/question/15444131

#SPJ1

Out of the sketch of the orbitals, the options are:

A three-dimensional representation of an electron's most likely position within an atom is called an orbital. The likelihood of discovering an electron near a hydrogen atom's nucleus is depicted in the diagram below. The 1s orbital has the highest likelihood, as you can see.

A p orbital resembles a pair of lobes on either side of the nucleus, or it has a slightly dambell-like structure. A p orbital electron has an equal chance of being in either half.

Therefore, the correct options are:

To learn more about orbitals, refer to the link:

https://brainly.com/question/18914648

#SPJ4

The question is incomplete. Your most probably complete question is given below: the image is added.

Answer: two;ideal;identical

Explanation:

The angle between two bonds on the same atom is known as the bond angle. It varies according to the number of lone pairs, hybridization, atom repulsion, and each atom's electronegativity.

The geometric angle formed by two adjacent bonds is known as a bond angle. Simple molecules can take on a variety of forms, such as: Atoms are connected in a straight line in a linear model.

The number of lone pairs an atom contains frequently influences the bond angle. In the case of an atom with no lone pairs, the form is trigonal planar, and the bond angle is 120°. The molecule has a 118 bond angle and one lone pair that generates a bent shape.

Therefore, We predict that the two zones of electron density will align themselves with a 180° bond angle on either side of the centre atom using the VSEPR theory.

Learn more about bond angle here:

https://brainly.com/question/13751116

#SPJ12

Answer:

c. colour

other options will have effect on the bottle

In the XeI₂ Lewis structure, a xenon atom displays a xenon atom in the center, surrounded by two iodine atoms. There are two single bonds connecting the xenon atom to each iodine atom. There are three lone pairs on the xenon atom and both iodine atoms.

Lewis's structure is a pattern or diagram that describes the number of valence electrons of the atoms that will form chemical bonds. The Lewis structure is also known as the electron dot formula.

Several stages of how to write a Lewis structure:

Learn more about Lewis's structure at https://brainly.com/question/20300458

#SPJ4

The enzymatic cycle has four steps, and they include the following;

1. The reaction between the Enzyme and Substrate

2. The substrate/enzyme complex formation

3. Catalysis

4. Enzyme releases a product

A small molecule will attach to the enzyme's active site and stop the action. The plants adapt by changing amino acid(s) in the enzyme. They adjust the structure and are continuously active; the small molecule cannot limit this enzyme.

The four steps in an enzyme cycle are;

1. The substrate and enzyme are found in one region. There are times when there is more than one substrate molecule and the enzyme changes.

2. The enzyme will then be trapped on the substrate in the special region called the active site. The combination is called substrate/enzyme complex. The active site will be in a shaped special region for the enzyme, which fits around a substrate.

3. Catalysis will happen when the Substrate changes. It can be broken down or combined with other molecules forming something new. It will break and form chemical bonds; afterward, a product/enzyme complex will occur.

4. The enzyme will release a product. When the enzyme is relaxed, it will return to its original shape and be ready to work on the other substrate molecule.

To learn more about the enzyme, refer;

brainly.com/question/1596855

#SPJ4

a biochemist investigating the function of the massive protein complex known as the ribosome

What action might a chemical analyst take?

In industry, academia, and government, analytical chemists are used in many facets of chemical research. They conduct fundamental laboratory research, create procedures and products, create analytical instrumentation, teach, and engage in marketing and legal activities.

What are the four types of chemical analytical techniques?

Analytical chemistry is important in four main areas since it is used in many different scientific fields. These fields include chromatography, potentiometry, acid-base techniques, and spectroscopy.

To know more about Biochemist

Visit:

https://brainly.com/question/8167734