Draw as many Lewis structures of C4H8 as possible. Every Lewis structure should include one double bond between 2 C atoms.

structure BrF₂ attached below and it have 20 electron valency.

The Lewis structure of BrF₂⁺ can be illustrated as follows:

Take the valence electron count as the first step.

With 7 valence electrons each, the halogens bromine and fluorine belong to the 17th group of the periodic table.

The bromine atom in BrF₂ has 7 outermost valence shell electrons.

BrF₂ has 7 electrons in the fluorine atom's outermost valence shell.

Due to the presence of two fluorine atoms in bromo difluoride, a total of 7+7(2) = 21 valence electrons are available. and BrF₂⁺ means it donate their proton so there gonna be 20 valence electron.

The second step is to place the least electronegative atom possible in the middle of the molecule.

From the top of the group in the periodic table to the bottom, the value of electronegativity drops. Therefore, the electronegative value of bromine is lower than that of fluorine.

The bromine atom is preserved in the middle of the molecule and is surrounded by two fluorine atoms since it has the least electronegativity.

Then Place two electrons to symbolize a link between the atoms.

Of order for the atoms in a BrF₂⁺ molecule to make bonds with one another, place two electrons between each bromine and fluorine atom.

The remaining unbonded electrons are divided among the atoms to complete the octet.

The BrF₂⁺ molecule contains a total of 20 valence electrons. Four of these are utilised to form bonds with the bromine and fluorine atoms, leaving the remaining 16 electrons unconnected.

To complete the octet, each fluorine atom needs six non-bonded electrons and two electrons from the single bond it created with bromine. The BrF₂⁺ molecule requires 12 non-bonded electrons because it contains two fluorine atoms.

The central bromine atom will continue to receive the remaining five unbonded electrons, and four additional electrons will be used to create the single bond with the fluorine atoms. As a result, bromine gains a total of nine electrons, expanding into an octet.

Learn more about lewis structure here at: https://brainly.com/question/20300458

#SPJ4

Boiling point of solution when 0.6 g of urea is dissolved in 100g of water, is 100.052°C.

Urea mass = 0.6 g

Water's mass is 100 g, or 0.1 kg, and its molarity is 0.6/60*0.1, or 0.1 M.

Boiling point increase = Tb

Boiling point of the solution is calculated as Kb*m = 0.52*0.1 = 0.052 K.

Pure water has a boiling point of T = 373 K.

Tb = Tb - T Tb

= Tb + T 373 + 0.052

= 373.052 K

= 100.05 °C

Consequently, the solution's boiling point is 100.052°C.

To know m ore about boiling point of solutions from given link

brainly.com/question/24675373

#SPJ4

Complete question: When 0.6g of urea dissolved in 100g of water, the water will boil at (Kb for water=0.52kJ.mol −1 and normal boiling point of water =100 ∘ C).

A lithium atom has a charge of three. As a result, a nitrogen atom will produce an anion with a charge of 3 and three more electrons than protons. The ion is known as a nitride ion and has the symbol N3 for it.

There are protons, neutrons, and electrons, three types of subatomic particles. Protons and electrons, two of the subatomic particles, each have an electrical charge of one or the other. On the other hand, neutrons lack a charge.

Triatomic molecules are made up of three atoms, which can be from the same chemical element or another. Examples include H2O, CO2, HCN, and O3 (see image) (ozone).

To know more about lithium atom visit:-

https://brainly.com/question/17338557

#SPJ4

In a control experiment, to validate the amount of HCl neutralized by an antacid, at the end of experiment antacid would not be present.

The following net-ionic equation describes how a strong acid and a strong base react together: H₃O⁺(aq) + OH⁻(aq) → 2H₂O(l). The pH of the resulting solution can be calculated from the concentration of the excess reactant if either the acid or the base is in excess. The solution has a pH of 7.00 at 25°C if the acid and base are equimolar.

Contrarily, weak bases only partially react with water to form hydroxide ions, whereas strong bases completely react to form the hydroxide ion. A strong acid and strong base react by neutralizing one another, which results in the production of salt and water.

To know more about neutralization reaction visit:-

brainly.com/question/23008798

#SPJ4

Answer:

2358.1

Explanation:

I just pressed the calculator :]

10³ = 1000

2.3581 × 1000

=2358.1

Sorry if this didn't help you :)

A substance that resists changes in pH is referred to as a buffer.

A buffer is a substance that resists changes in its pH when a small quantity of a strong acid or base is added to it.

Buffers are usually prepared from solutions of a weak acid and its conjugate base or a weak base and its conjugate acid.

Buffers are usually found in living organisms as they help living organisms maintain homeostasis.

Some of the buffers found in living organisms include:

The pH of a solution measures the acidity or basicity of the solution.

pH values less than 7 are acidic, while pH values greater than 7 are basic, A pH of 7 is neutral.

Learn more about buffers at: https://brainly.com/question/1385846

#SPJ1

Answer:

A

Explanation:

"Nonmetals tend to be gases or liquids at room temperature and are found on the right side of the table."

This can be observed using a labelled periodic table.

The ksp for silver sulfate if the solubility of ag2so4 in pure water is 4.5 g/l is 1.2x10-5.

The Ksp is the solubility product, which is the product of the ions increased to their coefficients. This is based on the chemical equation's mole ratio. The stoichiometry of the dissolving reaction influences the relationship between solubility and solubility product constant. When two ionic compounds share an ion, the solubility of a sparingly soluble ionic material is considerably reduced in a solution of another ionic molecule.

The equilibrium constant for the dissolving of a solid material into an aqueous solution is the solubility product constant. It's represented by the symbol Ksp. The solubility product is a type of equilibrium constant whose value varies with temperature.

To learn more about solubility product, here

https://brainly.com/question/1419865

#SPJ4

Carbohydrates require carbon as their primary component. There is carbon in every known carbohydrate. All carbohydrates also contain hydrogen and oxygen atoms, with the exception of a few simple sugars, which only contain carbon and hydrogen atoms.

Carbon, hydrogen, and oxygen atoms make up the macromolecules known as carbohydrates. They are a significant energy source. They can be found in fruits and vegetables as sugars, starches, and fibre. What categories do the carbs fit into? Starchy meals are complex carbohydrates because they include two or more sugar units. Compared to simple carbs, complex carbohydrates' molecules digest and transform more slowly. They are widely distributed in whole-grain bread, cereals, lentils, beans, peanuts, potatoes, peas, and corn. As one of the three primary macronutrients, carbohydrates are one of the three.

To learn more about Carbohydrates please click on below link

https://brainly.com/question/14614055

#SPJ4

4-Chlorobut-1-ene with HBr (a)

In this reaction, an alkene is present. Thus, there will be an addition reaction in which the most substituted carbon will get the addition of the nucleophile "". Here, carbon 3 results in 3-bromo-1-chlorobutane.

1-Chlorobut-1-ene with HBr (b)

We additionally have an alkene in this reaction. Thus, there will be an addition reaction in which the most substituted carbon will get the addition of the nucleophile "". Here, carbon 2 creates 2-bromo-1-chlorobutane.

(c) H2O, H+, and 4,4-Dimethylcyclopentene

In this reaction, an alkene is present. Thus, there will be an addition reaction in which the most substituted carbon will get the addition of the nucleophile "". 3,3-dimethylcyclopentan-1-ol is produced in this instance from carbon 3.

Propyne with 2HCl (d)

In this reaction, an alkyne is present. We will therefore experience an additional reaction.

To learn more about reaction please click on below link

https://brainly.com/question/28984750

#SPJ4

Hybridization of oxygen is Sp³ and hybridization of carbon is Sp³ .Due to the polarity of the carbonyl group, which results from the electronegativity differences between the oxygen and carbon atoms, acetone is a polar chemical. As a result, Acetone has a dipole moment of about 2.69. Lewis Structure, Molecular Structure and isomer are attach in image below.

The organic molecule acetone has the chemical formula (CH3)2CO. The smallest and most basic ketone. It is a colourless, flammable liquid with a distinctively strong odor that is also highly volatile. Because it is miscible with water, acetone is used as a significant organic solvent in industry, the household, and laboratories.

Acetone is a ketone, whereas alcohols belong to a separate class known as alcohols. Alcohols can be created from ketones (reacting with hydrogen or another reducing agent). Ketones can isomerize to unsaturated alcohols under specific circumstances.

Thus,  Acetone has a dipole moment of about 2.69.

To learn more about acetone, follow the link;

https://brainly.com/question/13334667

#SPJ4

A mixture of 50g of 20C water and 80g of 40C water has a temperature of 30C.

T is equal to M1 (50g), M2 (25g), and M1 (25g). T1 : 20C

M2 : 50g. T2 : 40C

final temperature: (50*20+50*40)/50+50 :. (3000)/100 : 30C for M1T1+M2T2/M1+M2.

The ° symbol is typically used to denote temperature measurements in degrees rather than the written word, with a space following the number but not the symbol and the temperature scale: 80 °C was applied to the sample.

Chemistry relies heavily on temperature as a factor. It is due to an increase in the material's temperature that a substance transforms from solid to liquid. Increasing the temperature frequently hastens chemical processes.

To know more about Temperature visit:

https://brainly.com/question/29133754

#SPJ4

Examples of scope 2 emission are, the electricity and natural gas that is purchased from the local power utility and energy consumption that purchased from the utility.

The Scope 2 emissions are the indirect emissions from the generation of purchased energy from a utility provider. All GHG emissions released in the atmosphere from the consumption of purchased electricity, steam, heat and cooling. For most organizations, electricity will be the unique source of scope 2 emissions. Scope 2 covers the electricity consumed by the end user. We can use the simple term “buy” for the scope 2 emission because the organization typically buys energy to run its operations. This emissions come from purchased electricity, steam, heating, or cooling.

To learn more about Scope 2 emission please visit:

https://brainly.com/question/28240761

#SPJ4

When the concentration of a substance is 0.1, the freezing point depression will be the maximum.

The temperature when a substance changes into a solid is known as the freezing point.. It is the point when the molecules in a liquid gain enough energy to form solid crystals and form a solid. Freezing point depends on the type of substance and the pressure. For example, water freezes at 0°C (32°F) at 1 atmosphere of pressure. However, some substances freeze at temperatures below 0°C and some substances do not freeze solid at all. The freezing point of a substance is an important physical property that can be used to identify it.

This is because the freezing point depression increases with the increase in concentration. The freezing point depression for a 0.1 molar solution is approximately 1.86°C. This means that the freezing point of a 0.1 molar solution is 1.86°C lower than the freezing point of pure solvent. This effect is due to solutes interfering with the hydrogen bonding between molecules of the solvent and therefore decreasing the freezing point.

To learn more about freezing point
https://brainly.com/question/24314907
#SPJ4

The periodic table's third period (row) element, aluminum, has three valence electrons.

Therefore, gallium has three valence electrons. By sharing electrons, atoms can join to form an octet of valence electrons. Consequently, a substance with three electron shells is classified as Period 3.

Lithium, beryllium, boron, carbon, nitrogen, oxygen, fluorine, and neon are among the elements found in the second period. This time frame corresponds to the filling of the second (n = 2) shell, notably its 2s and 2p subshells, in a quantum mechanical description of atomic structure.

To know more about periodic table's visit:-

https://brainly.com/question/8832755

#SPJ4

The chemical reaction takes place when a substrate is chemically altered by an enzyme after entering the active site of the enzyme.

At the enzyme's catalytic site, which is where the reaction takes place, this chemical modification of the substrate occurs. The substrate may engage in a number of chemical reactions at the catalytic site, such as the transfer of a chemical group or the breaking or forming of chemical bonds. The enzyme and the substrate in question determine the specific kind of chemical reaction that occurs.

One or more products are produced as a result of the chemical modification of the substrate and are then released by the enzyme. The chemical is then accessible to tie and catalyze the response with extra substrate atoms.

Learn more about Enzymes here:

https://brainly.com/question/14577353

#SPJ4

Explanation:

To solve for molarity, you would need to change the volume of the solution.

Molarity is a measure of concentration in a solution, and it is calculated by dividing the number of moles of solute (in this case, potassium hydroxide) by the volume of the solution (in liters). The molarity of a solution is usually represented by the symbol "M".

In the given sample, the number of moles of potassium hydroxide (KOH) is 0.0255 mol, and the volume of the solution is 10.0 ml. To solve for the molarity of the solution, you would need to convert the volume from milliliters to liters, and then divide the number of moles of KOH by the volume of the solution in liters to calculate the molarity.

For example, to solve for the molarity of the solution, you could use the following formula:

M = (0.0255 mol KOH) / (10.0 ml / 1000 ml/L)

= 0.00255 M

This would give you the molarity of the solution as 0.00255 M.

Answer:

inner transition elements.

Explanation:

right answer

A business is considered carbon neutral if it has net zero carbon emissions, meaning that it has balanced its GHG emissions with an equivalent amount of GHG reductions or removals.

To determine if a business is carbon neutral, the following steps can be taken:

Learn more about carbon-neutral business here;

https://brainly.com/question/20405263

#SPJ4

Three levels of electron energy are present in the magnesium atom (shells).

Magnesium and aluminum are a desired alloy because it combines strength and lightweight while having a lower density than aluminum. All cells and almost 300 enzymes depend on this element, which is the tenth most prevalent element by mass in the human body. An atom's mass is its atomic mass. Because it relates to the mass of a single particle, the atomic mass or relative isotopic mass is associated with a particular isotope of an element. Magnesium has an atomic mass of 24.305 u. Magnesium's typical isotopes have masses of 24, 25, and 26. 12 is the atomic number.

To know more about Magnesium please click on the link brainly.com/question/1533548

#SPJ4

The cells contain the same text as red oval are 5.

A string is a sort of data in computer science that contains sequences of characters, some of which can take the form of series of integers.

With the exception of the last shape at the bottom right of the figure, all of the forms in the choice have a string of numbers that correspond to the red oval shape.

As a result, we can infer that there are 5 forms that share the same string as the red oval.

Thus, computer science can help solve problem related to complex mathematics with ease.

To know more about strings, click here:

brainly.com/question/25965491

#SPJ4

The pressure of a sample of pure, gaseous hydrocarbon introduced into a previously evacuated rigid 1.00L vessel will be 0.00 atm.

The sample of gas is pure, so the pressure will depend only on the number of molecules in the vessel and the temperature. This can be calculated using the Ideal Gas Law, which states that ,

PV=nRT.

The term n is the number of moles of gas, R is the gas constant (8.314 J/(K⋅mol)), and T is the temperature in Kelvin.

Therefore, the pressure can be calculated as:

P = nRT/V

Where P is the pressure in atm, V is the volume of the vessel in liters, and n and T are as described above.

Since the sample of hydrocarbon is pure, the number of moles (n) can be calculated from the mass of the sample. Assuming the sample is introduced into the vessel at room temperature (25°C = 298K), the pressure of the gas can be calculated as:

P = (m/M)(8.314 J/(K⋅mol))(298 K)/1.00L

Where m is the mass of the sample and M is the molar mass of the hydrocarbon.

Therefore, the pressure of a sample of pure, gaseous hydrocarbon introduced into a previously evacuated rigid 1.00L vessel will be 0.00 atm.

Learn more about Ideal Gas Law at : https://brainly.com/question/28257995

#SPJ4

Answer:

The correct statement about the number of protons and neutrons in a nuclear change is: "The relative numbers of protons and neutrons can differ before and after the change, but the total number of those particles remains the same."

Explanation:

In a nuclear change, the total number of protons and neutrons (also known as nucleons) remains constant, but the specific arrangement of those nucleons can change. This can be achieved through processes such as nuclear decay, where an unstable nucleus emits particles and becomes more stable, or through nuclear reactions, where two or more nuclei collide and rearrange to form new nuclei. In either case, the total number of protons and neutrons is conserved, but the specific numbers of protons and neutrons in the resulting nuclei can be different from the original nuclei.

It's important to note that the total atomic mass (also known as the atomic weight) and total charge of a nucleus can change as a result of a nuclear change. The atomic mass is determined by the total number of protons and neutrons in a nucleus, so it will be different if the relative numbers of those particles change. The total charge of a nucleus is determined by the number of protons, so it will be different if the number of protons changes.

Scope 1 emissions are greenhouse gas (GHG) emissions that are directly caused by an organization's activities. Scope 2 emissions are GHG emissions that result from the generation of electricity, heat, or steam that an organization consumes.

Scope 1 emissions are greenhouse gas (GHG) emissions that are directly caused by an organization's activities. These emissions are emitted from sources that are owned or controlled by the organization, and are a result of the organization's operations. Examples of scope 1 emissions include emissions from fuel combustion in company-owned vehicles and emissions from on-site fuel-fired boilers or heaters.

Scope 2 emissions are GHG emissions that result from the generation of electricity, heat, or steam that an organization consumes. These emissions are often referred to as "indirect emissions" because they are not directly emitted by the organization itself, but rather by the source of the energy that the organization consumes. For example, if an organization consumes electricity from a coal-fired power plant, the emissions from the power plant's fuel combustion would be considered scope 2 emissions for the organization.

Scope 1 and 2 emissions are often referred to as "direct emissions" because they are caused directly by the activities of the reporting organization. In contrast, scope 3 emissions, also known as "other indirect emissions," are those that result from activities that are not under the control or ownership of the reporting organization, but are a part of its value chain.

To know more about scope 3

https://brainly.com/question/29546969

#SPJ4

Answer:

experiments which gases that first became possible at the turn of the nineteenth century legend Dalton in 1803 to propose a modern theory of the atom based on the how did the following assumptions

Your brain's stress-reduction mechanisms are activated when you smile. Neuropeptides are these chemicals that let neurons in your brain communicate with one another. Dopamine, endorphins, and serotonin are also released by smiling in the brain.

Why is smiling so essential?

Studies have shown that in addition to the endorphins that people release, smiling can also reduce stress, blood pressure, blood sugar, and blood sugar levels, strengthen immune systems, and release serotonin and natural painkillers. Attracts People to You - A smile frequently relaxes other people.

Your brain's stress-reduction mechanisms are activated when you smile. Neuropeptides are these chemicals that let neurons in your brain communicate with one another. Dopamine, endorphins, and serotonin are also released by smiling in the brain.

To learn more about smile from the given link.

https://brainly.com/question/29414798

#SPJ4

The compound NH₄⁺ is tetrahedral in geometry and is non-polar. SO₂ is polar in nature and has a bend shape. CHCl₃ is tetrahedral and it is polar.

Polar compounds are those having a permanent dipole moment. When the atoms bonded together have significant difference in electronegativity the electrons will attracts more to the highly electronegative atom and there occurs a net dipole moment results in polarity.

The ammonium ion NH₄⁺ is a tetrahedral molecule having no polarity. The dipole moments cancel each other due its tetrahedral nature. SO₂ is bend in geometry due to the presence of lone pair of electrons on oxygen atom. It is a polar compound.

The compound trichloromethane has a net dipole moment and it is polar with a tetrahedral structure.

To find more on polar compounds, refer here:

https://brainly.com/question/14752836

#SPJ4

The shape of oval symbol is a ellipse.

The oval shape symbol depict a elliptical path. Except in the context of projective geometry, the term "oval" as used to describe curves in geometry is not well defined. Commonly referred to as ovals or described as having a "oval shape," several unique curves. Typically, a planar curve must resemble the shape of an egg or an ellipse in order to be referred to as an oval. These unique characteristics of ovals are typical:

They have a shape that is similar to that of an ellipse, are differentiable (smooth-looking), simple (not self-intersecting), convex, closed, planar curves, and an axis of symmetry would often exist in an oval, but it is not necessary.

To know more about oval, click here,

brainly.com/question/10684783

#SPJ4

H2SO4 solution will freeze at the lowest temperature.

What is freezing point?

A solution's freezing point is lesser than that of the pure solvent. This signifies that freezing can only occur when a solution is reduced to a lower temperature than the pure solvent.

We have four solutions,

1.0 M NaOH

Pure water

1.0 M H2SO4

1.0 M C6H12O6

As, freezing point of solution ∝ 1\number of ions\ moles produced

1. NaOH= Na+ + OH-   (Number of ions= 2)

2. H2O + H2O = H3O+ + OH- (Number of ions= 2)

3. H2SO4 = 2H+ + SO42- (Number of ions= 3)

4. Glucose will not dissociate in any extent.

Therefore, freezing point of solution is least when it contains 1.0 M H2SO4 in it, as number of ions is maximum among these (3).

To learn more about freezing point from the given link.

https://brainly.com/question/24314907

#SPJ4

Complete question:

Which solution will freeze at the lowest temperature? 1.0 M NaOH Pure Water 1.0 M H2SO4 1.0 M C6H12O6.