Answers
Answer:
2. m = 426.6 gr
4. m = 143 gr
Related Questions
Reaction of HBr with 3-methylcyclohexene yields a mixture of four products cis-and trans-1-bromo-3-methylcyclohexane and cis-and trans-1-bromo-2-methylcyclohexane. The analogous reaction of HBr with 3-bromocyclohexene yields trans-1,2-dibromocyclohexane as the soul product.
Required:
Draw structures of the possible intermediates and mechanismfor the latter reaction.
Answers
Answer:
See explanation
Explanation:
The mechanism of this reaction including intermediates are shown in the image attached to this answer.
The reaction of HBr with 3-bromocyclohexene yields trans-1,2-dibromocyclohexane as the sole product because; the proton first attacks the 3-bromocyclohexene and a brominium ion is formed. This brominium ion is a cyclic intermediate as shown in the image attached.
Attack of a bromine ion afterwards must lead to the formation of trans-1,2-dibromocyclohexane as shown.
which method is adopted in the seperation of lead chloride from water
Answers
Explanation:
by dissolving the mixture of lead sulphate and lead chloride in water we can separate the two. after dissolving the mixture on water lead sulphate can be obtained as the solid that 's left behind lead chloride can be recovered by evaporating.
please help with 1 i would like to see the work please
Answers
Answer:
D. 0.063 mol
Explanation:
We can calculate the number of moles by using the definition of molarity:
Molarity = moles / litersAs we are given both the molarity and the volume:
0.05 M = moles / 1.25 LWe can calculate the number of moles:
moles = 0.05 M * 1.25 Lmoles = 0.063 molThus the answer is option D.
2.85 x 10-3 moles of an unknown compound has a mass of 0.206 g. The compound could be:
Answers
Answer:
Calcium sulfide (CaS)
Explanation:
From the question
Number of mole (n) = reacting mass (R)/molar mass (m)
n = R/m.................... Equation 1
make m the subject of the equation
m = R/n...................... Equation 2
Given: R = 0.206, n = 0.00285 moles.
Substitute these values into equation 2
m = 0.206/(0.00285)
m = 72.3 g/mol
From the above, the compond with molar mass close to 72.3 g/mol is Calcium sulfide (CaS)
Easy question please help.
Answers
Answer:
1 km an hour
Explanation:
i mean its pretty easy like you said if at 4 hours its traveled 4 km then its going 1 km an hour and at 10 its gone 10 km
Can tell the answer pls
Answers
Explanation: where the article????
define the term semiconductor and give an example of a metalloid
Answers
Answer:
A metalloid is a chemical element that exhibits some properties of metals and some of nonmetals.The closer you get to the zone, the more blurred the properties become. Metalloids tend to be semiconductors; silicon is the best known example of a semiconductor. Most microchips and microprocessors are made with silicon.
Explanation:
That is what i know on the answer
To solve this we must be knowing each and every concept related to metalloid. Therefore, in above given ways semiconductor can be defined.
What is metalloid?Metalloids are chemical elements with physical and chemical characteristics that fall between between metal and nonmetal.
A metalloid is indeed a chemical element with characteristics of both metals and nonmetals. The properties grow increasingly blurred as you move closer to the zone. The seven most well-known metalloids are boron, germanium, silicon, antimony, arsenic, tellurium, and polonium.
Metalloids are often semiconductors, with silicon being the most well-known example. Silicon is used to make the majority of microchips and microprocessors.
Therefore, in above given ways semiconductor can be defined.
To know more about metalloid, here:
https://brainly.com/question/2548493
#SPJ2
15. Kinetic and potential energy both relate to
a. friction
a. heat
b. light
d. motion
Answers
Answer:
All forms of energy are either potential or kinetic energy. Potential refers to stored energy while kinetic is energy in motion.
Explanation:
hope help you pls thanks...
D is correct option
All forms of energy are either potential or kinetic energy. Potential refers to stored energy while kinetic is energy in motion.
Sodium acetate never precipitates
True or False?
Answers
Answer:
it is false Sodium acetate NEVER precipitates
Answer:
It is indeed true, Sodium acetate never precipitates
You have to decide to change the temperature at which you run a certain reaction in hope of obtaining more product more quickly. You find that you actually get less of the desired product, although you get to the equilibrium state more quickly. Explain what happened.
Answers
Answer:
see explanation
Explanation:
The reaction has a negative rate law; i.e., Rate = - ΔConcentration / ΔTime which is graphically a negative slope for the plot of Rate as a function of reactant concentration. => Rate ∝ f(Reactant Concentration). However, by raising the temperature, an increase the probability of reaction occurs and the formation of more product.
A balloon is filled
with 35.0 L of
helium when the
temperature is
200K. If the tem-
perature rises to
450K, what is the
new volume of the
balloon?
Answers
Answer:
78.75L
Explanation:
According to Charle's Law:
V1/T1=V2/T2
35/200=V2/450
V2=(35*450)200
V2=78.75L
If 50.0 g of silicon dioxide is heated with an excess of carbon, 27.9 g of silicon carbide is produced. What is the percent yield of the reaction
Answers
Answer: The percent yield of the reaction is 83.5 %
Explanation:
The given balanced equation is
[tex]SiO_2+3C\rightarrow SiC+2CO[/tex]
[tex]SiO_2[/tex] is the limiting reagent as it limits the formation of product and [tex]C[/tex] is the excess reagent.
According to stoichiometry :
60.08 g of [tex]SiO_2[/tex] produce = 40.11 of [tex]SiC[/tex]
Thus 50.0 of [tex]SiO_2[/tex] will produce=[tex]\frac{40.11}{60.08}\times 50.0=33.4[/tex] of [tex]SiC[/tex]
Experimental yield of SiC = 27.9 g
Percent yield = [tex]\frac{\text {Experimental yield}}{\text {theoretical yield}}\times 100=\frac{27.9g}{33.4g}\times 100=83.5\%[/tex]
Thus percent yield of the reaction is 83.5 %
The percent yield of 83.5 % of 50.0 g of silicon dioxide is heated with an excess of carbon, and 27.9 g of silicon carbide is produced in the reaction.
What is the chemical balance of the equation?
The chemical equations are balanced when the reactants react to form products. The reactants and products react in proper ratios and if they are not in ratio then we balance them by adding the required quantity in the reactants and the products.
The given balanced equation is
[tex]\rm SiO_2+3C---- > SiC+2CO[/tex]
[tex]SiO_2[/tex] is the limiting reagent as it limits the formation of product and is the excess reagent.
According to stoichiometry
60.08 g [tex]SiO_2[/tex] of produce = 40.11 of [tex]SiC[/tex]
Thus 50.0 of [tex]SiO_2[/tex] will produce= [tex]\dfrac{40.11}{60.08} \times 50=33.4\ SiC[/tex]
The experimental yield of SiC = 27.9 g
The percentage yield will be calculated as
[tex]\rm Percentage \ Yield = \frac{Experimental\ yield}{Theoretical \ yield }\times 100[/tex]
[tex]\rm Percentage \ yield =\dfrac{27.9}{33.49} \times 100=83.5[/tex]
Thus the percent yield of 83.5 % of 50.0 g of silicon dioxide is heated with an excess of carbon, and 27.9 g of silicon carbide is produced in the reaction.
To know more about balanced chemical equations follow
https://brainly.com/question/26227625
Why do scientists think that liquid water might have once existed on Mars?
Answers
Answer: The discovery of three buried lakes. Scientists think that a long time ago there were lakes and rivers, etc on Mars. Now of course, you can't see any visible water sources on the surface.
Answer:
Almost all water on Mars today exists as ice, though it also exists in small quantities as vapor in the atmosphere.[5] What was thought to be low-volume liquid brines in shallow Martian soil, also called recurrent slope lineae may be grains of flowing sand and dust slipping downhill to make dark streaks.The only place where water ice is visible at the surface is at the north polar ice cap. Abundant water ice is also present beneath the permanent carbon dioxide ice cap at the Martian south pole and in the shallow subsurface at more temperate conditions. More than 5 million km3 of ice have been detected at or near the surface of Mars, enough to cover the whole planet to a depth of 35 meters. Even more ice is likely to be locked away in the deep subsurface.
Some liquid water may occur transiently on the Martian surface today, but limited to traces of dissolved moisture from the atmosphere and thin films, which are challenging environments for known life. No large standing bodies of liquid water exist on the planet's surface, because the atmospheric pressure there averages just 600 pascals , a figure slightly below the vapor pressure of water at its melting point; under average Martian conditions, pure water on the Martian surface would freeze or, if heated to above the melting point, would sublime to vapor. Before about 3.8 billion years ago, Mars may have had a denser atmosphere and higher surface temperatures, allowing vast amounts of liquid water on the surface, possibly including a large ocean that may have covered one-third of the planet.Water has also apparently flowed across the surface for short periods at various intervals more recently in Mars' history. Aeolis Palus in Gale Crater, explored by the Curiosity rover, is the geological remains of an ancient freshwater lake that could have been a hospitable environment for microbial life.Many lines of evidence indicate that water ice is abundant on Mars and it has played a significant role in the planet's geologic history.The present-day inventory of water on Mars can be estimated from spacecraft images, remote sensing techniques (spectroscopic measurements, radar, etc.), and surface investigations from landers and rovers.Geologic evidence of past water includes enormous outflow channels carved by floods, ancient river valley networks, deltas and lakebeds,and the detection of rocks and minerals on the surface that could only have formed in liquid water. Numerous geomorphic features suggest the presence of ground ice (permafrost)and the movement of ice in glaciers, both in the recent past and present. Gullies and slope lineae along cliffs and crater walls suggest that flowing water continues to shape the surface of Mars, although to a far lesser degree than in the ancient past.Although the surface of Mars was periodically wet and could have been hospitable to microbial life billions of years ago, the current environment at the surface is dry and subfreezing, probably presenting an insurmountable obstacle for living organisms. In addition, Mars lacks a thick atmosphere, ozone layer, and magnetic field, allowing solar and cosmic radiation to strike the surface unimpeded. The damaging effects of ionizing radiation on cellular structure is another one of the prime limiting factors on the survival of life on the surface. Therefore, the best potential locations for discovering life on Mars may be in subsurface environments. Large amounts of underground ice have been found on Mars; the volume of water detected is equivalent to the volume of water in Lake Superior. In 2018, scientists reported the discovery of a subglacial lake on Mars, 1.5 km (0.93 mi) below the southern polar ice cap, with a horizontal extent of about 20 km (12 mi), the first known stable body of liquid water on the planet.Understanding the extent and situation of water on Mars is vital to assess the planet’s potential for harboring life and for providing usable resources for future human exploration. For this reason, "Follow the Water" was the science theme of NASA's Mars Exploration Program (MEP) in the first decade of the 21st century. NASA and ESA missions including 2001 Mars Odyssey, Mars Express, Mars Exploration Rovers (MERs), Mars Reconnaissance Orbiter (MRO), and Mars Phoenix lander have provided information about water's abundance and distribution on Mars.Mars Odyssey, Mars Express, MRO, and Mars Science Lander Curiosity rover are still operating, and discoveries continue to be made.
A 72.0 g sample of an organic solid is dissolved in 180mL of water. The solid is extracted using one 60 mL extraction in the first extraction of an organic solvent which has a partition (distribution) coefficient with water of 10. The first extraction removed 55.4 g of solid from water. What are the numbers that need to go in box A and B to calculate the volume of solvent (y) that would be necessary to remove an additional 7.0g from the remaining sample dissolved in water. You DON'T have to complete the calculation to solve for y.
Answers
Answer:
[tex]V_{7.0}\approx 235ml[/tex]
Explanation:
From the question we are told that
mass of sample [tex]M=72.0 grams[/tex]
volume of water [tex]V=180 mL[/tex]
volume for extraction [tex]V'=60mL[/tex]
partition (distribution) coefficient water [tex]d=10[/tex]
initial extraction removal [tex]x=55.4g[/tex]
Generally the equation for the weight of sample [tex]x_n[/tex] is mathematically given by
[tex]x_n=x*(\frac{DV}{DV+V'})^n[/tex]
[tex]x_n=55.4(\frac{10*180}{10*180+60})^1[/tex]
[tex]x_n=53.613g[/tex]
Generally the weight extracted [tex]x_e[/tex] is therefore
[tex]w_e=x-x_n[/tex]
[tex]w_e=55.4-53613[/tex]
[tex]w_e=1.787[/tex]
[tex]w_e=1.787[/tex] is extracted with 60ml solvent .
Therefore volume of solvent (y) that would be necessary to remove an additional 7.0g
[tex]V_{7.0}=\frac{60}{1.767}*7[/tex]
[tex]V_{7.0}=235.030ml[/tex]
[tex]V_{7.0}\approx 235ml[/tex]
Which element had the smallest atomic radius
Answers
Answer:
helium is the answer
Explanation:
helium is the smallest element in francium is the largest hope this helps
For many years chloroform (CHCl3) was used as an inhalation anesthetic in spite of the fact that it is also a toxic substance that may cause severe liver, kidney, and heart damage. Calculate the percent composition by mass of this compound to four significant figures.
Answers
Answer:
SEE EXPLANATION
Explanation:
We must first obtain the molar mass of CHCl3 as follows;
CHCl3 = ( 12.01 * 1 )+ (1.008 * 1 ) + ( 35.45 * 3 ) => 119.37 g/mol
Then we obtain the percentage by mass of each element
For Carbon = ( atomic mass C / molar mass CHCl3 ) * 100
C = (12.01 / 119.37 ) * 100
C = ( 0.1006 * 100 )
C = 10.06 %
For Hydrogen :
H = ( atomic mass H / molar mass CHCl3 ) * 100
H = ( 1.008 / 119.37 ) * 100
H = 0.008444 * 100
H = 0.8444 %
For Chlorine :
Cl ( molar mass Cl3 / molar mass CHCl3 ):
Cl = ( 3 * 35.5 / 119.37 ) * 100
Cl = ( 106.5 / 119.37 ) * 100
Cl = 0.8921 * 100
Cl = 89.92%
Which of these compounds are molecular?
CBr4
FeS
P4O6
PbF2
Answers
Answer:
I think it's answer is P4O6
I hope it's helpful for you...
Calculate the ratio of the effusion ratesbetween chlorine gas (Cl2, molar mass = 71 g/mol) and iodine gas(I2, molar mass = 254 g/mol).
a)0.280
b)1.89
c)3.58
d)8.43
Answers
Answer:
d is the correct answer
Explanation:
8. How much heat will be released when
18.6 g of hydrogen reacts with excess O2
according to the following equation?
Answers
Answer:
15 is it
Explanation:
What is the source of the forces that cause this plate movement
Answers
Convection currents in the mantle, I got it right on a p e x
Iron has a density of 7.87 g/cm^3. What is the mass of 55.2 cm^3 of iron?
Answers
Answer: Formula: Mass = (Volume)(Density)
Iron Density = 7.87 g/cm^3
Volume of Iron = 55.2 cm^3
Mass=(V)(D)
Mass= (55.2 cm^3) x (7.87 g/cm^3)
Mass= 434,42 g
Explanation:
Iron has a density of 7.87 g/cm³. 434,42 g is the mass of 55.2 cm³ of iron.
What do you mean by density ?The term density is defined as the measurement of how closely a material is packed together.
It is also defined as the mass per unit volume. Density Symbol is D or ρ Density Formula is ρ = m/V, where ρ is the density, m is the mass of the object and V is the volume of the object.
Density is an important because it allows us to find out what substances will float and what substances will sink when placed in a liquid.
Formula:
Mass = (Volume)(Density)
Given:
Iron Density = 7.87 g/cm³
Volume of Iron = 55.2 cm³
Mass=(V)(D)
Mass= (55.2 cm³) x (7.87 g/cm³)
Mass= 434,42 g
Thus, Iron has a density of 7.87 g/cm³. 434,42 g is the mass of 55.2 cm³ of iron.
To learn more about the density, follow the link;
https://brainly.com/question/29775886
#SPJ2
Estimate the solubility of barium fluoride, BaF2, in a 0.100 M solution of barium nitrate, Ba(NO3)2, given that the K sp of BaF2 is 2.45×10-5.
A)7.83×10-3 M
B)1.57×10-2 M
C)7.83×10-4 M
D)2.45×10-4 M
Answers
Answer:
A) 7.83 x 10^-3 M
Explanation:
7.83 x 10⁻³ M is the solubility of barium fluoride, BaF[tex]_2[/tex], in a 0.100 M solution of barium nitrate, Ba(NO[tex]_3[/tex])[tex]_2[/tex], given that the K sp of BaF[tex]_2[/tex]is 2.45×10-5. The correct option is option A.
What is solubility?The ability of a material, the solute, to combine with some other substance, the solvent, is known as solubility in chemistry. Insolubility, or the solute's inability to create such a solution, is the opposite attribute. The concentration of a solute inside a saturated solution is typically used to determine how much of a substance is soluble in a certain solvent.
The two compounds are said to be just at solubility equilibrium at this time. There might not be a limit for some solutes or solvents, in which case they two are referred to as "miscible in any quantities." Whereas the solvent is often solid or liquid, the solute may be either a solid, liquid, or gas.
BaF[tex]_2[/tex]=0.100 M
Ba(NO[tex]_3[/tex])[tex]_2[/tex]=0.100 M
K sp of BaF[tex]_2[/tex]=2.45×10⁻⁵
solubility of barium fluoride=2.45×10⁻⁵×0.100 =7.83 x 10⁻³ M
Therefore, the correct option is option A.
To know more about solubility, here:
https://brainly.com/question/14366471
#SPJ2
If 8.25g N2 gas is inside a 1.50L flask at 325K what is the pressure inside the flask
Answers
Answer:
8.26g
Explanation:
8.25g +1.50÷325k=8.26g
You rub a comb on your hair and then the comb is able to pick up pieces of paper. Explain why this happens
Answers
Answer:
This happened because,the comb was charged with static electricity when it was rubbed on your hair.
(¬_¬)ﾉ( ˘ ³˘)♥
At some temperature for the equilibrium PX3(g) + X2(g) # PX5(g) the equilibrium constant is 0.74. At the same temperature the equilibrium constant for PX5(9) + PX3(g) X2(g) is
Answers
Answer: The equilibrium constant for [tex]PX_5(g)\rightarrow PX_3(g)+X_2(g)[/tex] is 1.35
Explanation:
Equilibrium constant is defined as the ratio of concentration of products to the concentration of reactants each raised to the power their stoichiometric ratios. It is expressed as [tex]K_c[/tex]
For the given chemical reaction:
[tex]PX_3(g)+X_2(g)\rightarrow PX_5(g)[/tex]
The expression for [tex]K_c[/tex] is written as:
[tex]K_c=\frac{[PX_5]^1}{[PX_3]^1[X_2]^1}[/tex]
[tex]0.74=\frac{[PX_5]^1}{[PX_3]^1[X_2]^1}[/tex]
For the reverse chemical reaction:
[tex]PX_5(g)\rightarrow PX_3(g)+X_2(g)[/tex]
The expression for [tex]K_c'[/tex] is written as:
[tex]K_c'=\frac{[PX_3]^1[X_2]^1}{[PX_5]^1}[/tex]
[tex]K_c'=\frac{1}{K_c}=\frac{1}{0.74}=1.35[/tex]
The equilibrium constant for [tex]PX_5(g)\rightarrow PX_3(g)+X_2(g)[/tex] is 1.35
what is the molecular geometry for CH2Br2?
Answers
HCH bond angle is ~110 degrees.
how many mg are in 125ml of
phosphoric acid?
Answers
Answer:
125000mg
Explanation:
1ml = 1000mg
125(1000) = 125000mg
HELPP PLZ FAST WILL GIVE BRAINLIEST
Benzene, a nonpolar, colorless solute, is most commonly found in oil and is a major component in gasoline.
In which of these two solvents will benzene most likely dissolve?
Solvent
Characteristics
A
Carbon tetrachloride
• Colorless liquid, noncombustible
• Nonpolar
Ethanol
• Flammable, colorless liquid
• Polar
Methanol
• Distinctive odor; volatile, colorless liquid
• Polar
Cyclohexane
• Strong odor; flammable; colorless liquid
• Nonpolar
OA
OB
ОС
OD
Answers
fossil fuels form in sedimentary rocks when-
Answers
Answer:
fossil fuels form in sedimentary rocks when increased heat and pressure applies to fossils.
Explanation:
fossil fuels are made when sedimentary rock gets heat and pressure increased.
Calculate the number of grams of Hydrogen required to produce 5.73 grams of water. 2H2+O2--->2H2O 2 grams 0.636 grams 1.2 gram 7.98 grams
Answers
Explanation:
32
2H
2
+O
2
→2H
2
O
Molecular mass of H
2
=2 g/mol
Molecular mass of O
2
=32 g/mol
From the balanced chemical equation,
2×2=4 g of hydrogen requires 32 g of Oxygen to react completely