How far has a 15 kg object moved, when a force of 22 N is applied for 5 seconds if it started at 3 m/s?

Answer:

An ammeter has a zero offset error. This fault will affect. neither the precision nor the accuracy of the readings. only the precision of the readings.

The accuracy of the present measurement will be impacted by an ammeter's zero offset inaccuracy, but the precision of the measurement will not change.

Resistance is the obstruction of electrons in an electrically conducting material.

voltage = current ×resistance

How accurate measurement or reading is may be determined by its accuracy. The measurements will be off because of zero inaccuracy.

Thus, The precision of the measurement would not alter if an ammeter made a mistake with its zero offsets, but the accuracy of the current measurement would be decreased.

To learn more about resistance, refer to the link;

brainly.com/question/14547003

#SPJ2

A force of 50 N was applied to an object with a mass of 5 kg, then the acceleration of the object will be 10 m/s².

The rate of change in an object's velocity with respect to time is known as acceleration in mechanics. The vector quantity of accelerations. The direction of the net force that is acting on an object determines its acceleration.

Since acceleration has both a magnitude and a direction, it is a vector quantity. Velocity is a vector quantity as well. The definition of acceleration is the change in velocity vector over a time interval divided by the time interval.

There are several types of acceleration :

According to the question, the given values are :

Force, F = 50 N

Mass, m = 5 kg

Force = m × a

a = 50 / 5

a = 10 m/s².

Hence, the acceleration of the object will be 10 m/s².

To get more information about acceleration :

https://brainly.com/question/2303856

#SPJ2

Answer:

I hope you liked my answer. Thank You!

Answer:

Explanation:

The father of the Multitude was Abraham. And he did precede the 10 commandments. But the story really has nothing to do with the 10 commandments.

He obeyed God's Command because it was God who issued it. Abraham had complete faith in God's ability to make things come out right. The sacrifice of Isaac was a test of faith.

I would advise you to answer true, but whoever wrote the question employed a twisted kind of logic. The sacrifice of Isaac had nothing to do with the 10 commandments. Thou Shalt not murder is not really covered by this circumstance.

So true might not be the correct answer. The question is very complex and does not lend itself to a simple True/ False answer.

Answer:

Explanation:

Ignoring friction, the acceleration will double

F = ma

2F = m(2a)

Answer:

[tex]\frac{a_{d}}{a_{i}} = \frac{(1 -mu)}{mu}[/tex]

= (1 - μ)/μ

Explanation:

Always draw a diagram!

Up the incline:

[tex]Fr_{max}[/tex] = maximum friction

[tex]Fr_{max}[/tex] = μk

k = R = mg.cos(45) = mg.sin(45)

Resolution of forces parallel to the slope:

F (Fp in the diagram) = force of propulsion

g = gravity

[tex]F - Fr_{max} = ma_{i}[/tex]

[tex]F -[/tex] μ.mg.cos(45) [tex]= ma_{i}[/tex]

Down the decline:

Resolution of forces:

[tex]mg.sin(45) - Fr_{max} = ma_{d}[/tex]

[tex]mg.sin(45) -[/tex] μ.mg.cos(45) [tex]= ma_{d}[/tex]

Then, find the ratio:

[tex]\frac{ma_{d}}{ma_{i}} = \frac{mg.sin(45) - mu.mg.cos(45)}{-F + mu.mg.cos(45)} \\\\ \frac{a_{d}}{a_{i}} = \frac{k - k.mu}{-F + k.mu} \\\\ = \frac{k(1 -mu)}{-F + k.mu}[/tex]

Potentially, there is no need to consider F in this situation, in which case:

[tex]\frac{a_{d}}{a_{i}} = \frac{k(1 -mu)}{k.mu} \\\\ = \frac{(1 -mu)}{mu}[/tex]

= (1 - μ)/μ

Answer:

Explanation:

Impulse results in a change of momentum

FΔt = mΔV

F = mΔV/Δt

The impulse acting on the hammer will equal the impulse acting on the nail

If we assume upward is the positive direction

F = m(vf - vi)/t

F = 1.2(1.0 - (-1.5)) / 0.001

F = 3000 N

A 1.2 kg hammer slams down on a nail at 5.0 m/s and bounces off at 1.0 m/s, if the impact lasts 1.0 ms, so the average force exerted on the nail is 3000 N.

According to Newton's third law, there is an equal and opposite force for every force. The hammer's force on the nail will be identical in size to the nail's force on the hammer, but opposite in direction.

Momentum shifts as a result of impulse.

FΔt = mΔV

F = mΔV/Δt

The force exerted on the hammer will be equivalent to the force exerted on the nail.

m(vf - vi)/t = F

F = 1.2(1.0 - (-1.5)) / 0.001

F = 3000 N

Therefore, F = 3000 N, if A 1.2 kg hammer slams down on a nail at 5.0 m/s and bounces off at 1.0 m/s, if the impact lasts 1.0 ms.

Learn more about force, here:

https://brainly.com/question/20038742

#SPJ2

Answer: I think its zero-

I dont really know about this...

Answer:

Water speed Plays a key role In determining The shape of it

Answer:

i cant see

Explanation:

but im smart

Hi there!

We can use the work-energy theorem to solve.

Recall:

[tex]\large\boxed{E_i = E_f}}[/tex]

Initial energy = final energy

The initial energy is purely potential (she starts from rest), and, if we assign the bottom of the slope as the 0 line, her energy at the bottom is purely kinetic.

PE = mgh

KE = 1/2mv²

We can begin by setting the two equal:

mgh = 1/2mv²

Cancel out the mass and rearrange to solve for velocity:

2gh = v²

v = √2gh

Plug in given values and use g ≈ 10 m/s²:

v = √2(10)(20) = 20 m/s

Answer:

Explanation:

Potential energy gets converted to rotational kinetic energy

a)         ½Iω² = mgh

½(mL²/3)ω² = mgL/2

       (L/3)ω² = g

              ω = [tex]\sqrt{3g/L}[/tex]

       v(CG) = (L/2) [tex]\sqrt{3g/L}[/tex]

Not sure if you wanted angular speed or tangential speed of the CG so I gave both.

b) v = Rω =  L [tex]\sqrt{3g/L}[/tex]

Answer:

Explanation:

F = kx = 65 N/m(0.94 m) = 61.1 = 61 N

Option B is correct.Increasing the distance between the particles by a factor of 3 decrease the force between two charged particles by a factor of 9.

The electric force between the two charges is directly proportional to the product of the charge and inversely proportional to the square of the distance between them.

The electric force is found as;

[tex]\rm F = \frac{K q_1q_2}{r^2}[/tex]

The electric force between the two charges is directly proportional to the product of the charge.

The electric force is inversely proportional to the square of the distance between them.

Increasing the distance between the particles by a factor of 3 decreases the force between two charged particles by a factor of 9

Hence, option B is correct.

To learn more about the electric force, refer to the link;

https://brainly.com/question/1076352

#SPJ2

Answer:

the movement of snail on the ground is in random motion.

the strings of the guitar is in oscillatory motion.

the whirling of stone tied with a thread is in circular motion.

Answer:

Neutrons

Explanation:

The region a represents the distance of the electron from the nucleus.

According to the wave mechanical model of the atom, the probability of finding an electron within a given volume element (representing the atom) is the square of the wave function psi.

Since a is the region in space where there is the greatest probability of finding the electron in the atom, it follows that distance of the electron form the atom is always a.

Learn more about the wave mechanical model: https://brainly.com/question/1382157

Explanation:

Downstream: you just sum the magnitude of the velocity vectors:

3km/h + 4km/h = 7km/h

Upstream: difference of the magnitudes of the velocity vectors, in absolute value:

|3km/h - 4km/h| = 1km/h

Answer:

d.

Explanation:

Radiometric dating is a method of dating geological/ archaeological specimens by determining the relative proportions of particular radioactive isotopes present in a sample. Carbon dating is a form of radiometric dating, but, in choice b, you're not comparing the carbon to the rock. One would compare ¹⁴C levels within the organic compound, just as one would compare radioactive isotope levels in a rock.

Answer:

Explanation:

Let x be the leaf spring compression distance

F = kx

5.20 x 10⁵ = (5.45 x 10⁵)x + (3.80 x 10⁵)(x - 0.500)

5.20 x 10⁵ = (5.45 x 10⁵)x + (3.80 x 10⁵)(x) - 1.90 x 10⁵

7.10 x 10⁵ = (9.25 x 10⁵)x

x = 0.76756...

x = 0.768 m

W = ½(5.45 x 10⁵)0.768² +  ½(3.80 x 10⁵)(0.768 - 0.500)²

W = 174,148.648648...

W = 174 KJ

Answer:

Explanation:

If we ignore wind resistance, the time needed for the hay to drop from vertical rest is

t = √(2h/g) = √(2(300)/9.81) = 7.82 s

d = vt = 80.0(7.82) = 626 m before passing over the cow.

If the speed of the magnet is doubled, the induced voltage is twice as great

Faraday's law of induction states that whenever relative motion exists between a coil and magnetic field, a voltage will induce in the circuit and this voltage is proportional to the rate of change of the flux. The expression for the motional emf is as follows:

ε=Blv

Here, ε is the motional emf, B is the magnetic field, l is the length of the conductor, and v is the velocity at which the magnetic field changes.

The induced voltage by the moving magnet is directly proportional to the speed of the magnet. Therefore, an increase in the speed of the magnet will increase the induced voltage.

If the speed of the magnet is doubled, the induced voltage is twice as great

Find out more at: https://brainly.com/question/13369951

Answer:

Mechanical energy into electrical energy

Explanation:

Answer:

ExplanMechanical energy into electrical energy

SIation:

The amount of work done by the hairdryer is equal to 450 Kilojoules.

Given the following data:

To determine the amount of work done by the hairdryer:

Mathematically, the work done by an object with respect to power and time is given by the formula:

[tex]Work\;done = power \times time[/tex]

Substituting the given parameters into the formula, we have;

[tex]Work\;done = 750 \times 600[/tex]

Work done = 450,000 Joules

Note: 1000 Joules = 1 Kilojoules.

Work done = 450 Kilojoules.

Read more: https://brainly.com/question/13818347

Answer:

Explanation:

Average velocity in the 24 m interval is 24 / 4 = 6 m/s

Average velocity in the 64 m interval is 64 / 4 = 16 m/s

There is a 4 second interval between the two points where average velocity equals actual velocity

a = Δv/t = (vf - vi) / t = (16 - 6) / 4 = 2.5 m/s²

s = v₀t + ½at²

24 = v₀(4) + ½(2.5)4²

4v₀ = 24 - 20

v₀ = 1 m/s

Not asked for but the velocity at the end of the first segment and beginning of the second segment is 11 m/s and final velocity is 21 m/s

The initial velocity of the 3250 Kg mass is 2.1 m/s. The distance covered by the larger mass in 5s is 4.7 cm.

In this problem, we have to apply the law of conservation of linear momentum. Note that;

Momentum before collision = Momentum after collision

m1u1 + m2u2 = m1v1 + m2v2

(2150 × 10) + (3250u1) = (2150 + 3250)5.22

21500 + 3250u1 = 5400 × 5.22

3250u1  = 28188 - 21500

u1 = 28188 - 21500/3250

u1 = 2.1 m/s

2) Again from the principle of conservation of linear momentum;

(0.40 × 3.5) + (0.60 × 0) = (0.40  × 0.70) + (0.60 × v2)

1.4 = 0.28 + 0.60v2

1.4 - 0.28 =  0.60v2

v2 = 1.87 cm/s

Using;

s = 1/2 ( u + v)t

s = 1/2(0 + 1.87) × 5

s = 4.7 cm

Learn more: https://brainly.com/question/8898885

Answer:

Explanation:

Itz Deepika Here to help ~ .

Note:- If you have more questions then let me know !!

Answer:

A. 340 meters/second

I think this is the right answer.

Answer:

Explanation:

Work is the area under the curve between the limits

W = ½(5)(8 - 5) = 7.5 J

The work done when an object moves from 5 m to 8 m is 7.5 J.

The work done in moving an object from one point to another is equal to the product of force and displacement of the object.

W = Fs

The work done on an object is equal to area under the curve

The area between point 5 m and 8 m = ¹/₂ x (8 - 5) x 5 = 7.5 J

Thus, the work done when an object moves from 5 m to 8 m is 7.5 J.

Learn more about work done here: https://brainly.com/question/8119756

Answer:

Explanation:

a = F/m = 7500/2000 = 3.75 m/s²

v² = u² + 2as

s = (v² - u²) / 2a

s = (0² - 45²) / (2(-3.75))

s = 270 m