if the potential of a voltaic cell is 0.837 v, what is the free energy change when two moles of electrons are transferred in an oxidation-reduction reaction?

Answers

Answer 1

Gibb's free energy change is  -1,61,541Joules when two moles of electrons are transferred in an oxidation-reduction reaction.

In thermodynamics, the Gibbs free energy (or Gibbs energy ) is a thermodynamic potential that can be utilized to compute the greatest measure of work that might be performed by a thermodynamically shut framework at consistent temperature and pressure. It likewise gives an important condition to cycles, for example, substance responses that might happen under these circumstances.

For calculating free energy change, we need to know about the value of faraday constant and voltage of the cell.

We know that 1 faraday=96500Coloumb,voltage=0.837,n=2

So, free energy(ΔG)= - n × F × E°

=>ΔG= -2 × 96500× 0.837

=>ΔG= -193000×0.837

=>ΔG= -1,61,541Joules (Here negative sign shows that voltaic cell is possible in this universe).

Hence, required free energy is -1,61,541Joules.

To know more about Gibb's free energy, visit here:

https://brainly.com/question/20358734

#SPJ4


Related Questions

calculate the ph for the strong acid/strong base titration between 50.0 ml of 0.100 m hno3(aq) and 0.200 m naoh (titrant) at the listed volumes of added base: 0.00 ml, 15.0 ml, 25.0 ml, and 40.0 ml.

Answers

The pH of the strong acid /strong base for different volumes are 1.00,1.51,7,12.523.

What is pH?

Water's pH level indicates how acidic or basic it is. The range is 0 to 14, with 7 acting as a neutral value. A pH of greater than 7 denotes a base, while one of less than 7 suggests acidity. The pH scale really measures the proportion of free hydrogen and hydroxyl ions in a solution.

Using the concept of titration we can calculate pH for each volumes.

Using pW=pH+pOH

For detailed answer please visit attached file

For more information about pH please visit:

https://brainly.com/question/12609985

#SPJ4

50.0 g of sucrose (molar mass 342 g/mol) is dissolved in a total volume of 200. ml of solution. 10.0 ml of this solution is withdrawn and then diluted with water to a total volume of 50.0 ml. what is the molarity of sucrose in this final solution?

Answers

According to molar concentration, the molarity of  sucrose in the final solution is 0.0584 M.

What is molar concentration?

Molar concentration is defined as a measure by which concentration of chemical substances present in a solution are determined. It is defined in particular reference to solute concentration in a solution . Most commonly used unit for molar concentration is moles/liter.

The molar concentration depends on change in volume of the solution which is mainly due to thermal expansion. Molar concentration is calculated by the formula, molar concentration=mass/ molar mass ×1/volume of solution in liters.

In terms of moles, it's formula is given as molar concentration= number of moles /volume of solution in liters.

Initially the molarity of sucrose is determined as, number of moles /volume of solution in liters which is 0.146/0.2=0.0292 moles and then molarity after dilution is determined as, M₁V₁=M₂V₂, on substitution M₂=0.0292×10/50=0.0584 M.

Thus, the molarity  of sucrose in this final solution is 0.0584 M.

Learn more about molar concentration,here:

https://brainly.com/question/21841645

#SPJ1

Can valence electrons be in the d-orbital?

Answers

Due to the reason that inner d-orbitals do not belong to the outermost shell, these electrons are not included in valence electronic configuration

What is valence electrons ?

The electrons in an atom's outermost energy level or shell are known as valence electrons. With six valence electrons, oxygen has two in the 2s subshell and four in the 2p subshell.

Ti is a transition metal with valence electrons in d orbitals since it is an element of the d block.

Normally, only electrons at the highest energy level are considered as valence electrons, however for transition metals, electrons in the d-orbital state following the preceding noble gas configuration are also counted. Fe contains 8 valence electrons, for instance, and its electron configuration is [Ar]3d^64s^2.

Learn more about Valence electrons here:

https://brainly.com/question/371590

#SPJ4

A 295 g aluminum engine part at an initial temperature if 13.00 degrees Celsius absorbs 75.0 kJ of heat. What is the final temperature of the part (c of AL - 0.900 J/gK)?

Answers

Answer: 295°C


Explanation: Given data:

The mass is m=295g
The initial temperature is T1=13∘C
The absorbed heat is Q=75kJ
The specific heat of aluminum is CAl=0.9J/g∘C


The expression for the heat is written as:

Q=mCAl(T2−T1)

Here, T2is the final temperature



Substitute the known values:
75×103=295g×0.9J/g∘C(T2−13∘C)T2≈295∘C
Thus, the final temperature is 295∘C.

What are the 4 common elements that form covalent bonds?

Answers

Answer:

The four (4) most important elements found in cells that form covalent bonds are carbon, hydrogen, oxygen and nitrogen.

Explanation:

Is sodium bicarbonate a physical or chemical change?

Answers

When sodium bicarbonate breaks down into sodium carbonate and water this reaction comes under the category of a chemical change.

Decomposition and pH are two common chemical properties of sodium bicarbonate. The pH tells us about the number of (H+) ions present in the compounds. It helps us to identify whether a given substance is acidic , basic or neutral in nature.

A chemical change happens when a reaction takes place , whereas a physical change happens when something changes shape but not its chemical properties.

Physical changes are reversible whereas chemical changes are irreversible. Example , melting of ice is physical change whereas burning of paper is chemical change.

To learn more about sodium bicarbonate

brainly.com/question/8560563

#SPJ4

draw complete lewis dot structures for ethyl acetate, acetaminophen, phenacetin, caffeine, and aspirin. after analysis of the lewis structure of ethyl acetate (which is used as the mobile phase in this experiment), determine its polar or nonpolar nature. using the structure of ethyl acetate, is it a polar or a non-polar solvent?

Answers

The Lewis structure is a simplified representation of the valence shell electrons in a molecule. It is used to show how electrons are arranged around individual atoms in a molecule. Electrons are shown as "dots" or to connect electrons as a line between two atoms.

1) Ethyl acetate: [tex]C_{4}H_{8}O_{2}[/tex]

Ethyl acetate is a widely used solvent, especially for paints, varnishes, lacquers, cleaning compounds, and perfumes. Like last week's MOTW, dichloromethane, is used as a solvent to reduce coffee grounds. In the laboratory, ethyl acetate is a common solvent for column and thin layer chromatography.

     

2. Acetaminophen:

Acetaminophen is an active ingredient in hundreds of over-the-counter (OTC) and prescription medications. It relieves pain and fever. Acetaminophen can also be combined with other active ingredients in medications that treat allergies, coughs, colds, flu, and insomnia. In prescription  acetaminophen is found along with other active ingredients to treat severe pain. Acetaminophen can cause serious liver damage if used more than prescribed. The FDA has taken action to improve consumer safety when using acetaminophen.

3) Phenacetin:

Phenacetin has been used as an analgesic and antipyretic in both human and veterinary medicine for many years. It was introduced in treatment in 1887 and was widely used in analgesic mixtures until it was included in kidney diseases (nephropathy) due to the abuse of analgesics. Phenacetin was also once used as a stabilizer for hydrogen peroxide in hair bleaching preparations.

4-Caffeine

Caffeine is a stimulant, which means it increases activity in your brain and nervous system. Caffeine also increases the circulation of chemicals in the body like cortisol and adrenaline. In small doses, caffeine can make you feel relaxed and focused.

5.Aspirin

Aspirin is a common medicine to relieve minor aches, pains, and fever. Also, people use it as an anti-inflammatory or blood thinner.

Aspirin can buy by people can buy  over the counter without a prescription. Daily benefits include relieving headaches, reducing inflammation, and reducing fever.

For more such question on Lewis Dot Structure:

https://brainly.com/question/20300458

#SPJ4

What is the process of enzymes called?

Answers

The process of enzymes is called enzymatic action and the in terms of body it is known as digestion.

The response then occurs, changing the substrate into merchandise and forming an enzyme merchandise complicated. The merchandise then go away the energetic site of the enzyme. The first step of an enzyme catalyzed response is catalytic turnover the binding of substrate via way of means of the enzyme the discharge of product dissociation of the ES complicated ES -> E + P. An enzyme-catalyzed response may be more or less divided into 3 stages: enzyme-substrate binding, "catalysis" and product release.

To learn more about enzyme check the link below:

brainly.com/question/1596855

#SPJ4

What is chemical simple answer?

Answers

A chemical is any substance whose composition is known. A chemical always consists of the same "substance," to put it another way. Water is one of the substances found in nature.

What makes chemistry simple?

Chemical science is the branch of natural science that investigates the composition of substances as well as their properties and reactions. It is defined as the study of matter options include chemistry.

Chemical biology: what is it?

The study of chemistry and biology is combined in a field of research known as chemical biology. To study and influence biological processes, chemists commonly utilize analytical tools, tiny compounds produced by synthetic chemistry, and chemical instrumentation.

To know more about Chemical visit:-

https://brainly.com/question/29240183

#SPJ4

Why does a solution have a depressed freezing point and an elevated boiling point compared with the pure solvent?

Answers

Depressed freezing point because the solute changed the solvent's molecular structure, causing it to refreeze at a lower temperature. More solute supplied generates a higher boiling point because the solute interacts with the solvent, requiring more energy to bring to a boil.

What is a pure solvent?

When mating surfaces are in close contact and no gap filling is necessary, pure solvents, which have just one component, are employed to affix thermoplastics.

Depressed freezing point because the solute changed the solvent's molecular structure, causing it to refreeze at a lower temperature. More solute supplied generates a higher boiling point because the solute interacts with the solvent, requiring more energy to bring to a boil.

To learn more about pure solvent from the given link.

https://brainly.com/question/1414549

#SPJ4

What are the elements located on the right side of the table called?

Answers

The farthest right side of the table is the noble gases. Please give brainliest I need three more

Convert The Following Measurement. 0.0088 G/ CM3 = KG/M3

Answers

The value of density in kg/m³ is equal to 0.00088 kg/m³.

What is the metric system?

The metric system can be demonstrated as a system of measurement that is composed after the decimalized system based on the meter.  Each of the fundamental dimensions can be represented by a single base unit of measurement.

For parameters derived from the base units of the system, units derived from the base units can be used such as the square meter being the derived unit for the area, a parameter derived from length.

Metric units can be defined as units based on the gram, meter, or second and decimal multiples.

Given the density in the unit of g/cm³.

Density = 0.0088 g/cm³

We know that 1 Kg = 1000 g

⇒ 1 g = 10⁻³ Kg

We know that 1 m = 100cm

1 cm = 10⁻² m

Therefore, Density = 0.0088 × 10⁻³Kg/10⁻² m³

Density = 0.00088 kg/m³

Learn more about Metric units, here:

brainly.com/question/19483018

#SPJ4

you created a standard curve and calculated the slope to be 64.52. after synthesizing your copper network, you weighed 0.059 grams of your copper product, worked it up with nitric acid, buffer, and ammonia and added it to a 25 ml volumetric flask. then, you measured the absorbance of your solution and received a value of 0.374. what is the % mass of copper in your product?

Answers

The % mass of copper in your product will be 3.93 %.

Calculated slope = 64.52

Mass of copper product = 0.059 g

Initial volume (V1) = 25 ml

Final volume (V2) = 100 ml

Absorbance (A) = 0.374

% mass of copper = ?

To find out the concentration (C) we use the following equation

C = A / slope

Put the values

C (M2) = 0.374 / 64.52

C (M2) = 0.005797 g/L

To calculate M1 we use the following equation.

M1V1 = M2V2

M1 = 0.005797 * 100 ml / 25 ml

M1 = 0.0232 g/L

mass of copper = Penny solution x Volume

mass of copper  = 0.0232 g/L x 0.1 L

mass of copper = 0.00232 g

% mass of copper = (total mass of copper ÷ mass of penny) x 100

% mass of copper = (0.00232/ 0.059 ) x 100

% mass of copper = 3.93 %

You can also learn about percent mass from the following question:

https://brainly.com/question/5394922

#SPJ4

which of the following describes an unsymmetrical addition reaction? group of answer choices propyne with 2 moles cl2 in ccl4 propyne with 1 mole h2, ni and heat propyne with na/nh3 propyne with 1 mole hbr propyne with 1 mole br2 in ccl4

Answers

Propyne with 1 mole HBr describes an unsymmetrical addition reaction.

When a neutral reagent is added to a neutral alkene, the negative side of the reagent attaches itself to a neutral carbon atom that has a smaller number of hydrogen atoms than the positive side of the reagent.

The addition of H-X to a rational alkene such as propene produces a rational alkene. (given in image 2)

Propene and but-1-ene are examples of unsymmetrical alkenes because the groups or atoms attached to either end of the carbon-carbon double bond are unbalanced.

A hydrogen and a methyl group are found at the end of the double bond in propene, but two hydrogen atoms are found at the opposite end of the double bond in hexane. (given in image 4)

Due to the presence of these non-covalent alkenes, it is possible to obtain two different products from some addition processes. When HX molecules are added to propene, you can get one of the following reactions as given in image 3.

It depends on which side of the circuit you add HX across the two connections to determine the answer. In fact, in most cases, it is the second response that occurs. As we have described it, the hydrogen atom is bonded to the carbon atom on the right side. This is my machine.

For more such question on unsymmetrical alkenes:

https://brainly.com/question/28024588

#SPJ4

a soluble chloride X with liquid Y on heating to give gas Z which turns moist blue litmus paper red
1.identify Y and Z
2. give chemical test that can be used to confirm X is a chloride

Answers

Answer:(a)(i) Y is Conc. H2SO4, Z is HCl(g) or hydrogen chloride

(ii) Acidify a solution of X with dilute HNO3 and add AgNO3(aq). White ppt. soluble in aqueous ammonia confirms the presence of chloride. E.g. add solution of X to Pb2+ solution to get a white ppt. soluble when hot, reappearing on cooing.

Explanation:

HI(aq) + H2O(l) = H3O(aq) + I-(aq) Identify each as either a: Bronsted-Lowry acid, Bronsted-Lowry base, conjugate acid, or conjugate base.

Answers

HI is the Bronsted-Lowry acid and water is the Bronsted-Lowry base, it accepts the H⁺.

According to Bronsted Lowry theory:

Acid is the one that release a proton

Base is the one that accept a proton

HF is the acid, it donates the proton to water.

Water is the base, it accepts the H⁺

HI (aq)  +  H₂O(l)   →   H₃O⁺  (aq)   +   I⁻ (aq

HF is the acid, it donates the proton to water.

Water is the base, it accepts the H⁺

The Bronsted Lowry theory

The Bronsted-Lowry hypothesis, sometimes known as the proton theory of acid and base, was devised by English chemist Thomas Martin Lowry and Swedish scientist Johannes Nicolaus Bronsted.

According to the theory, when an acid and a base react, the acid trades its proton for the base's conjugate base, and the base for the acid's conjugate proton.

The Bronsted-Lowry hypothesis is an enlarged version of the Arrhenius theory of acid-base.

The Arrhenius theory states that while base increases the concentration of OH- ions in an aqueous solution, acid increases the concentration of H+ ions.

The Arrhenius hypothesis' disadvantage is that it can only be used to identify an acid-base interaction in an aqueous medium.

To learn more about Bronsted Lowry theory do follow

brainly.com/question/1435076

#SPJ4

Calcium carbide (CaC2) reacts with water to produce acetylene (C2H2): CaC2 (s) + 2H2O (g) → Ca(OH)2 (s) + C2H2 (g) Production of 39 g of C2H2 requires consumption of ________ g of H2O

Answers

Mole measure the number of elementary entities of a given substance that are present in a given sample. Therefore,  production of 39 g of C[tex]_2[/tex]H[tex]_2[/tex] requires consumption of 53.6g of H[tex]_2[/tex]O.

What is mole?

The SI unit of amount of substance in chemistry is mole. The mole is used to measure the quantity or amount of substance. We know one mole of any element contains 6.022×10²³ atoms which is also called Avogadro number.

moles of C[tex]_2[/tex]H[tex]_2[/tex]= mass of C[tex]_2[/tex]H[tex]_2[/tex]/molar mass of C[tex]_2[/tex]H[tex]_2[/tex]

                        =39 g /26.04

                        = 1.49moles

for 1 mole of C[tex]_2[/tex]H[tex]_2[/tex], 2 moles of H[tex]_2[/tex]O is required.

for 1.49 moles of C[tex]_2[/tex]H[tex]_2[/tex], 2×1.49=2.98 moles of H[tex]_2[/tex]O is required.

mass of water= moles× Molar mass

                       = 2.98×18

                       =53.6g

Therefore,  production of 39 g of C[tex]_2[/tex]H[tex]_2[/tex] requires consumption of 53.6g of H[tex]_2[/tex]O.

To know more about mole, here:

https://brainly.com/question/15209553

#SPJ1

In our chem lab. We have to do something called the chem 21. This weeks topic was about solving ten test tube mystery and basically we were using a plate to mix it by one chemical to one chemical.We discovered thatA=KlB=Na2sC=NH4ClD=HClE=AgNo3F=BaCl2G=H2SO4H=NaBrI=NaOHJ=CuSO4However, we have to explain why and write the net ionic equation?

Answers

our chemistry lab. The chem 21 is a requirement for us. Basically, we were using a plate to chem lab it by one chemical to one.

Your Instructor has defined tolerances, which the Chem21 computer uses to score your response. This week's theme was about solving ten test tube mysteries. You will be informed on the website whether you are required to round your response chem lab to the correct number of Significant Figures; otherwise, you need just enter a number that lies between the correct amount minus

Here are some Chemistry Practical Class 12 experiments that will help students effectively prepare for their exams. I Making potash alum or ferrous ammonium sulphate double salt. Identifying a cation and an anion in a.

To learn more about chem lab please click on below link

https://brainly.com/question/28447712

#SPJ4

What is the concentration of solution which contains 16 gram of urea in 20 gram of solution?

Answers

The concentration of a solution which contains 16 gram of urea in 20 gram of solution is 80%.

What is concentration?

Concentration in chemistry is a quantitative measure of the amount of solute in a given solution. It is usually expressed in terms of the amount of solute per unit volume of solution. It is commonly used to determine the amount of reactants or products in a reaction. It is also used to measure the amount of dissolved substances in a given sample, such as the amount of salt in seawater.
Urea is a non-volatile solute, meaning it does not evaporate when the solution is heated. Therefore, the concentration of the solution remains the same throughout the heating process.
To know more about the concentration click-
https://brainly.com/question/23437000
#SPJ4

What will be the ratio of the root mean square speeds of the molecules?

Answers

The root mean square speeds of the molecules of a gas is calculated as  [tex]V_{rms}[/tex][tex]= \sqrt{\frac{3RT}{M} }[/tex]

After that, the speeds of the molecules are calculated at the two different temperatures as given in the question and then, the ratio is calculated by dividing.

Here, T is the temperature,

         m is the mass of the molecules and

         R is the Gas constant.

Let's taken an example of the two temperatures are as follows:

[tex]T_{1}[/tex]=270K

[tex]T_{2}[/tex]=30K

We know that the root mean square speed of the molecules is given as:

 [tex]V_{rms} = \sqrt{\frac{3RT}{M} }[/tex]

Putting the values of the temperatures and calculating the root mean square speeds of the molecules:

[tex]V_{rms1} = \sqrt[]{\frac{3R*270}{M} }[/tex]

[tex]V_{rms2} = \sqrt{\frac{3R*30}{M} }[/tex]

Dividing the above two root mean square speed equations in order to get the ratio of the two, we get,

⇒ [tex]\frac{V_{rms1} }{V_{rms2} } = \frac{\sqrt{\frac{3R*270}{M} } }{\sqrt{\frac{3R*30}{M} } }[/tex]

⇒ [tex]\frac{V_{rms1} }{V_{rms2} } = \sqrt{\frac{9}{1} }[/tex]

⇒ [tex]\frac{V_{rms1} }{V_{rms2} } = \frac{3}{1}[/tex]

Hence, the ratio of the root mean square speeds of the molecules of an ideal gas at 270K and 30K is 3:1.

Note: It is important to note that the root-mean-square speed is the measure of the speed of particles in a gas, defined as the square root of the average velocity-squared of the molecules in a gas. The mass and the Gas constant values for a particular gas remain the same and only temperature is the variant.

To know more about root mean square speeds, check:

https://brainly.com/question/13095222

#SPJ4

6. For 2NH3 equilibrium N₂ + 3H2, Kb is 6 × 104 then Kb is a.1.12 × 10^3 b. 1.67 * 10^5 1.51 × 10^-3 d. 1.67 x 10^-5​

Answers

Answer:

Explanation:

The equilibrium constant (K) for the reaction 2NH3 equilibrium N₂ + 3H2 is given as 6 × 104. This value indicates the relative concentrations of the reactants and products at equilibrium.

To determine the correct option among the choices given (a, b, c, or d), we need to know the concentration units of the equilibrium constant. Without this information, it is not possible to determine which of the given options is correct.

The equilibrium constant is usually expressed in terms of the concentration of the reactants and products in the reaction. For example, if the concentration units for the equilibrium constant are mol/L, then the correct option could be one of the following:

a. 1.12 × 10^3: This option has the correct units (mol/L) but the value is incorrect.

b. 1.67 * 10^5: This option has the correct units (mol/L) but the value is incorrect.

c. 1.51 × 10^-3: This option has the correct units (mol/L) but the value is incorrect.

d. 1.67 x 10^-5: This option has the correct units (mol/L) but the value is incorrect.

Without more information about the concentration units of the equilibrium constant, it is not possible to determine which of the given options is correct.

Using the activity series and the information from the handbook, which method do you think the suspects used to make the coins, additive plating or displacement plating?.

Answers

They create a redox reaction between zinc solid and zinc ions using additive plating. As a result, neutral zinc atoms were produced, which were then deposited onto copper coins.

A technique for coating one metal on top of another called electroplating. Typically, this is carried out for decorative, industrial, or coin-making purposes.

There are two methods for coating a metal:

1. Additive plating

2: Displacement plating

In additive plating, a species in a solution that contributes electrons reduces metal ions. Now, the reduced metal begins to deposit on top of another metal.

When the plating metal is present in the solution during displacement plating, a metal with a lower oxidation number displaces a metal with a higher oxidation number.

The only method used by counterfeiters to create fake coins is additive plating, in which the coinage metal is deposited on top of another base metal.

To know more about redox reaction click on below link:

https://brainly.com/question/2671074#

#SPJ4

What is 3 oxygen called?

Answers

Answer: Ozone

Explanation:

Ozone, O3, also known as Trioxygen, is a triatomic molecule consisting of three oxygen. Ozone is the allotrope, or behavior, of oxygen that is less stable than O2.

list the elements na, ca, rb, cl, he in order of decreasing first ionization energy.

Answers

The order of the elements in decreasing first ionization energy is He > Cl > H > Ca > Rb.

In physics and chemistry, ionization energy, ionization energy is the minimum energy required to remove the weakest bound electron from an isolated atom, positive ion, or molecule. The ionization energy of an atom, denoted Ei, is measured by finding the minimum energy of a light quantum (photon) or electron being accelerated to a known energy that would repel loosely bound atomic electrons. . Measurements are made in the gas phase on single atoms.

On the periodic table, the first ionization energy usually increases as you move from left to right over a period of time. This is because the increased nuclear charge causes the outermost electron to bind more strongly to the nucleus.

To learn more about ionization energy, here

https://brainly.com/question/28385102

#SPJ4

Stereochemistry: Choose the chiral structures Choose the chiral structures among the ones shown. Check all that apply. Stereochemistry: Choose the achiral structures Choose all the achiral compounds among the ones shown. (Each of your choices can be achiral in any conformation, not just the ones shown.) Check all that apply.

Answers

Among the given compounds all are having chiral centres since the  central carbon is attached to different groups.

What is chirality?

A compound become chiral if it contains at least one chiral centre that is., a carbon atom with four different valencies. For example CFClBrI is chiral since the carbon atom is joined with four different groups.

Chiral compounds are optically active and have stereoisomers. The first given compound is chiral , where the second carbon with the OH group is attached with four different groups. One is OH, second is H, and one is CH₃ group and the last one is CH (CH₃)₂.

The second compound is also chiral where the carbon with the OH group has four different valencies. The third one is also chiral with a carbon atom having four different groups. Hence, all of the compounds are chiral.

To find more on chirality, refer here:

https://brainly.com/question/29022658

#SPJ4

What will be the result if we use little amount of chemical sanitizer in sanitizing the tools used in preparing food?

Answers

Dangerous pathogens won't be reduced sufficiently without sanitizer. A surplus could be harmful.

Why is proper use of the chemical sanitizer so important?

Sanitizers are substances that have the ability to eradicate microorganisms, including the bacteria responsible for food poisoning and other diseases. When used properly, they can reduce the number of bacteria on surfaces to a safe level.

What would occur if chemical sanitizers were used excessively?

Concentrations higher than necessary can be hazardous, detrimental to flavour and odour, corrosive to metals and other materials, and residue-producing. Over time, a chlorine bleach sanitising solution starts to lose part of its effectiveness.

To know more about sanitizers visit:-

https://brainly.com/question/4296165

#SPJ4

What is the ratio of rms velocity of the molecules of an ideal gas at 240 K and 60 K?

Answers

The ratio of root mean square velocity of molecules of the ideal gas is 2.

The root mean square is the sum of the squares of the individual velocity values divided by the number of values.

The root mean square is the same as the root mean square velocity.

An ideal gas is considered a monoatomic molecule with molecular mass equal to one.The root mean square velocity([tex]V_{rms}[/tex])  of an ideal gas is calculated by the formula below.

[tex]V_{rms} =[/tex] [tex]\sqrt{\frac{V_{1} ^{2} + V_{2} ^{2} +V_{3} ^{2} +....V_{n} ^{2}}{n} }[/tex]

In terms of temperature, the formula is

[tex]V_{rms} =[/tex][tex]\sqrt{\frac{3RT}{M_{w} } }[/tex]

n= Number of molecules

R= Universal gas constant (8.314 J [tex]K^{-1}[/tex] [tex]mol^{-1}[/tex])

T=Temperature(in Kelvin)

[tex]M_{w}[/tex]= Molecular weight of gas

ratio = [tex]\frac{\sqrt{\frac{3R \ 240}{M_{w} } }}{\sqrt{\frac{3R \ 60}{M_{w} } }}[/tex]

        = [tex]\frac{\sqrt{240} }{\sqrt{60} }[/tex]

        = 2

Learn more about : Root Mean Square

brainly.com/question/29655057

#SPJ4

What percent of MgO is Mg?

Answers

The percent composition is calculated by dividing the mass of an atom by the total mass of the compound multiplied by 100.

percentage of atom= (mass of atom/molecular mass) X 100

The atomic weight of magnesium Mg is 24.3. The atomic weight of oxygen is 16.0.

The total mass is (24.3+16.0 = 40.3)

put values in formula to calculate percentage,

Percentage of magnesium= (24.3/40.3) X 100

Percentage of magnesium= 60.29%.

The percent composition of magnesium in magnesium oxide is 60.29 %.

molecular mass

Molecular mass of an element is defined as the sum of the masses of the elements present in the molecule.

Learn more about percentage composition here :-

https://brainly.com/question/1350382

#SPJ4

Draw the final product of this series of reactions. 1. BH3 2. H2O2, NaOH 3. PBrz 4. 1 equivalent of NaOEt • Use the wedge/hash bond tools to indicate stereochemistry where it exists. • Show stereochemistry in a meso compound. • If the reaction produces a racemic mixture, draw both stereoisomers. • Draw one structure per sketcher. Add additional sketchers using the drop-down menu in the bottom right corner. • Separate multiple products using the + sign from the drop-down menu. OH compound a compound b (racemic) compound d OH compoundc compound b compound e (racemic) y. 104 z mCPBA aa. NaOH, H20 bb. Naº Reagents a. HX m. Na/NH3 HBr, H2O2, hv n. H2SO4, HgSO4 C. H2O, H2SO4 0. (sia) BH then H2O2, NaOH d. X2 p. 1 equivalent of NaNH2 e. H2, Pd q. NBS, hv f. X2, H20 r. Bre, hv g. OsO4 then NaHSO3 s. (CH3)2COK h. Hg(OAC)2, H2O then NaBH4 t. PBrz i. BH2 then H2O2, NaOH SOCI2 j. Oz then (CH3)2S H3PO4 k. 2 equivalents of NaNH2 W. H2Cro4 1. H2, Lindlar's catalyst X. PCC This synthesis was designed using the Organic Chemistry Road Map found in the appendix of your textbook. In this synthesis, reagents from the table are used to carry out the indicated steps (shown in blue). In the box below, draw the structure of compound b.

Answers

The final product of the given series of reactions is shown in the attached diagram below.

What is hydroboration?

In organic chemistry, hydroboration can be described as the addition of a hydrogen-boron bond to double and triple bonds involving carbon (C=C, C=O, and C≡C).

Hydroboration forms organoborane compounds that react with a variety of reagents to form useful compounds, such as alcohols, or alkyl halides. The mostly known reaction of the organoboranes is oxidation to form alcohols by hydrogen peroxide.

Hydroboration is typically anti-Markovnikov according to which the hydrogen adds to the most substituted carbon of the alkene bond. Hydroboration proceeds through a four-membered transition state where both B and H are added on the same face of the double bond. The plane through which they are added is generated less hindered face.

After the addition of Boron, we get OH after the oxidation of BH₂ with H₂O₂. PBr₃ is used for the conversion of OH into Br and then base NaOEt will give eliminating reaction so the final product is an alkene.

Learn more about Hydroboration, here:

https://brainly.com/question/29238473

#SPJ4

]
Consider the following intermediate chemical equations.
C(s) +
CO(g) +
O₂(g) → CO(g)
How will oxygen appear in the final chemical equation?
O O2(g) as a product
O O2(g) as a reactant
OO(g) as a product
O 20(g) as a reactant
O₂(g) → CO₂(g)

Answers

In the above intermediate chemical equation, oxygen will appear as follows: O₂(g) as a reactant (option B).

What is a chemical equation?

A chemical equation in chemistry is a symbolic representation of a chemical reaction where reactants are represented on the left, and products on the right.

According to this question, an intermediate chemical equation is presented as follows:

CO(g) + O₂(g) → CO(g)C(s) + O₂(g) → CO₂(g)

As observed in the above chemical equation, oxygen will react in its gaseous form i.e. as a reactant.

Learn more about chemical equation at: https://brainly.com/question/28294176

#SPJ1

Other Questions
an earhtquake magnitude 2.0 or less The table shows the values (in thousands) of the average salary of NBA players x years after 1990. Write and use an exponential model to find the yearwhen the average NBA player's salary will be more than $3 million12Years, X34501530Salary, y60240480120Write an exponential model for this situation(put parentheses around the "b" value)What is the projected salary in 9 years?In what year would the salary be more than $3 million? (round to two decimal places) Tom Jordan is a manager for a McDonald's restaurant. Many of his key responsibilities include analyzing data and making key decisions for the success of his store. Tom's store has been experiencing decreased sales for breakfast services over the past 3 months. Tom is unsure why breakfast revenues are down while lunch and dinner revenues remain unchanged. Tom believes that he can drive revenue up by implementing a few different breakfast promotions such as free coffee or hash browns with the purchase of a meal. Tom performs an extensive analysis of how continuous changes in breakfast promotions could impact his daily revenue. What type of DSS analysis is Tom performing? optimization analysis sensitivity analysis transaction analysis goal-seeking analysis Can someone please help me with this! i feel like im gonna drown in math, help me pls Find the surface area of a cylinderwhose radius is 5 cm and whoseheight is 10 cm.Round to the nearest whole number.[?] cm2 Can someone help asap For the following right triangle, find the side length x. Round your answer to the nearest hundredth.010X15 plz I need help!!!!!!!!!!!!!!!!!! Which statement describes one way that nuclear fission differs from nuclear fusion? A. Nuclear fission can be sustained only in the Sun and other stars. B. Nuclear fission can occur spontaneously. C. The temperature required for nuclear fission is more than 15 million degrees Celsius. D. It is more difficult to start and control nuclear fission, Help!! I will give brainlest Which one is the right answers? I need some help with this! I will try to give brainliest!! Which choice gives the solution of this inequality? 3t+ < 28 The graph shows the number of y gallons of gasoline remaining in a car x hours after filling the tank. If log 5 = 0.699 and log 3 = 0.477, find log 45 without usingthe log key. 1. Lacewings are insects that hatch from eggs. Which of these correctly compares the lacewing life cycle with the frog life cycle? help me answer this question please When the women marched on the palace of Versailles, what did they achieve?O The king abdicated the throneThe soldiers turned on the monarchyO The queen was executedO The royal family returned to Paris ill give brainliest pls