in this experiment, what would be the effect if the point on the arm hanging the bob and the pointer are not on the same vertical line in the experiment?
Answers
If the point on the arm hanging the bob and the pointer are not on the same vertical line then the torque applied by the bob will not be zero.
When the point of arm and the pointer are in same vertical line than the angle between the point of arm and pointer will not be zero. We know that Torque is defined as the cross product of distance of point where force is applied and force applied on the body.
In other words, Torque=distance × Force
or Torque=rFsinθ(since cross product involves sinθ) where r is the distance and F is the applied force.
Since angle is not zero, therefore angle(θ) will be greater than zero,so sinθ have some value which is greater than zero,and it is enough to rotate the system from its equilibrium point.Due to torque,system will become unstable.
To know more about torque, visit here:
https://brainly.com/question/5352966
#SPJ4
(Complete question) is:
If a metal bob is rotated in a uniform circular motion in this experiement, what would be the effect if the point on the arm hanging the bob and the pointer are not on the same vertical line?
Related Questions
Question 6 of 10
If this vector were twice as long, what would be the coordinates of the tip?
O A. (1,-2)
O B. (-2, 1)
O C. (-4,2)
D. (2,-4)
PREVIOUS
Answers
A sphere is released into the atmosphere where air resistance is present. As it falls it loses 7J of potential energy. How much kinetic energy did it gain?
Answers
Answer:
7 J
Explanation:
Given that,
A sphere is released into the atmosphere where air resistance is present.
The lose in energy is equal to 7 J
We need to find the gain in its kinetic energy.
We know that, as per the law of conservation of energy,
Loss in potential energy = gain in kinetic energy
⇒
Gain in kinetic energy = 7 J
Hence, the gain in kinetic energy is 7 J.
This graph shows the energy of a reaction over time. Which statement is
true?
A. H represents the energy of the products.
B. G represents the activation energy.
C. G represents the energy of the products.
D. F represents the activation energy
Answers
Answer: D.
Explanation: Just took the quiz.
Answer:
D. F represents the activation energy
Explanation:
Three people push a piano on wheels with forces of 130 N to the right, 150 N to the left, and 165 N to the right. What is the strength and direction of the net force on the piano?
Answers
Answer:
45 N to the right possibly?
An aluminum rod is 300m and at 25 degree Celsius. Calculate the change in rod
length at 45 degree Celsius
Answers
Answer:
Explanation:
540
Compare and contrast hydrogen fuel cell vehicles with vehicles that have intemal combustion engines.
Answers
A hydrogen fuel cell vehicle is different from internal combustion engine as in fuel cell, hydrogen combines with oxygen whereas in internal combustion engines, gasoline is used.
What are hydrogen fuel cell vehicles and internal combustion engines?
In a internal combustion engine or fuel cell vehicle, the hydrogen fuel is combined with oxygen atom. While the combustion in a hydrogen- fuel or in a gasoline-powered engine is converted into mechanical energy, however in the hydrogen fuel cell vehicle, the chemical energy from the hydrogen and oxygen is converted into electrical energy.
Both hydrogen internal combustion engines and the hydrogen fuel cells can power vehicles using hydrogen, a zero-carbon fuel. Hydrogen engines burn hydrogen gas in an internal combustion engine, in the same way as the gasoline is used in a power engine. Examples of hydrogen internal combustion engines include gasoline engines, diesel engines, gas-turbine engines, and rocket-propulsion systems.
Learn more about Internal combustion engines here:
https://brainly.com/question/2836941
#SPJ2
A car and a semi-truck are both traveling along a road. Based on Newton's 2nd law, what will happen if both cars apply the same type of brakes at the same time?
Answers
Answer: ask god in your prayers
Explanation: im here for the same reason you are
I DONT KNOW THE ANSWER
Answer:
The semi-truck will stop after the car.
Explanation:
It will do that because the semi-truck has more mass than the car.
What is the transfer of energy from a wave to the medium through which travels
Answers
Answer:
'Wave' is a common term for a number of different ways in which energy is transferred: In electromagnetic waves, energy is transferred through vibrations of electric and magnetic fields. In sound waves, energy is transferred through vibration of air particles or particles of a solid through which the sound travels.
En las olimpiadas del 2012 del colegio villapalos maria gano la carrera de los 100 m en 10,56 s y la de 200 m en 22,34 s ¿en cual fue mas veloz
Answers
Answer:
Fue mas velóz en los 100 m.
[tex]v_{1}=9.47\: m/s[/tex]
Explanation:
Tomando en cuanta que la definición de velocidad es:
[tex]v=\frac{\Delta x}{t}[/tex]
Donde:
Δx es el desplazamientot es el tiempoLa primera velodcidad esta dada por:
[tex]v_{1}=\frac{100}{10.56}[/tex]
[tex]v_{1}=9.47\: m/s[/tex]
La segunda velocidad sera:
[tex]v_{1}=\frac{200}{22.34}[/tex]
[tex]v_{1}=8.95\: m/s[/tex]
Por lo tanto, en el primer tramo fue más rápido.
Espero te haya ayudado!
A car travels 9 km East, turns around, then travels 3 km West. What is the car's
DISPLACEMENT? *
Answers
Explanation:
I think you are 100℅ clear.
How does radiation occurs on earth or in space?
Answers
Answer:
Space radiation is made up of three kinds of radiation: particles trapped in the Earth's magnetic field; particles shot into space during solar flares (solar particle events); and galactic cosmic rays, which are high-energy protons and heavy ions from outside our solar system.
Explanation:
Which of the waves has the smallest amplitude?
A. The blue wave
B. The orange wave
C. The green wave
D. The red wave
Answers
Answer:
I think its the Blue wave, im not sure so dont take my word for it.
Explanation:
Answer: it’s the green wave
Explanation: trust me bro
Robb wants to win the next sled race. He asks for your advice. What would you tell him he should change in order to win? Explain why your solution would work in terms of energy.
Answers
Answer: Start at the top of the hill.
Explanation:
The options include:
a. Start at the bottom of the hill.
b. Start at the top of the hill.
c. Start in the middle of the hill.
Sled racing is simply a winter dog sport racing. Since Robb wants to win the next sled race, the advice that'll be given to him is that he should start at the top of the hill.
Other options such as starting at the bottom of the hill or the middle of the hill are wrong.
neeeeeeddddddssssshelp
Answers
Answer:
valence
Explanation:
A girl kicks a blue ball with a velocity of 20.0 m/s at 65.0o. How long is it in the air?
1.85s
1.92s
13.6s
3.69s
Answers
Explanation:
t = usin©/g
Where t is the time to reach the maximum height
Time spent in air is T = 2t
Hence, T = 2usin©/g
T = 2 x 20 x sin 65°/ 9.8
T = 3.69s
which lens have plus power
Answers
Answer:
Explanation:
A plus lens which is convex in shape, converges light and the accommodative system must relax in order to keep an image clear.
A car hits a wall with a force of 80 N and
has a mass of 4.5 kg. What was the
acceleration of the car?
Answers
A=F/M
A=80N/4.5kg
A=17.7 m/s^2
Unit for A is meters per second (m/s^2)
Hope this helps :)
Plan an experiment to measure the ideal mechanical advantage of a three-hole punch. (a) What materials would you need? (b) What procedure would you use?
Answers
Answer:
A) Three hole punch and either a layered plastic or paper
B) Identify the lengths involved ,
Length of input arm / length of output arm = L1/ L2
Explanation:
a) Materials involved includes :
Three hole punch and either a layered plastic or paper
Identify the forces acting on the three-hole punch which are Input and output forces
Identify the points where they act
B) procedures involved
The mechanical advantage = output force / input force
step one: Identify the lengths involved
assuming no friction or relatively small friction \
mechanical advantage can be calculated as : Length of input arm / length of output arm = L1/ L2
The tendency of an object to resist a change in motion is called ___________________
a.
displacement
c.
momentum
b.
inertia
d.
acceleration
Answers
the tendency of an object to resist a change in motion is called inertia
Calculate the momentum elephant of a 2020 kg elephant charging a hunter at a speed of 7.49 m/s .
Answers
Answer:
15129.8 Kg•m/s
Explanation:
From the question given above, the following data were obtained:
Mass = 2020 kg
Velocity = 7.49 m/s
Momentum =?
Momentum is simply defined as the product of mass and velocity. Mathematically, it is expressed as:
Momentum = mass × velocity
With the above formula, we can obtain the momentum of the Elephant as follow:
Mass = 2020 kg
Velocity = 7.49 m/s
Momentum =?
Momentum = mass × velocity
Momentum = 2020 × 7.49
Momentum = 15129.8 Kg•m/s
Thus, the momentum of the Elephant is 15129.8 Kg•m/s
The equation below shows a general equation for a reaction, and the amounts of the substance are written underneath.
AB + CD → AC + BD
(15 g) (?) (?) (10 g)
The total mass of the products is 50g. Which best completes the other two amounts?
The amount of CD is 40 g, and the amount of AC is 35 g.
The amount of CD is 35 g, and the amount of AC is 40 g.
The amount of CD and AC would be the same.
The amount of CD and AC is undetermined.
Answers
Explanation:
The amount of CD is 35 g, and the amount of AC is 40 g.
Explanation:
AB + CD \rightarrow AC + BDAB+CD→AC+BD
The law of conservation of mass states that in any chemical reaction, the total mass of the reactants must be equal to the total mass of the products.
In this reaction, we know the mass of one reactant (AB, 15 g) and the mass of one product (BD, 10 g). In order to have the same total mass on the left side and on the right side of the equation, the mass of AC must be 5 g more than the mass of CD. We see that the only choice that satisfies this condition is:
The amount of CD is 35 g, and the amount of AC is 40 g.
In fact, if we assume these masses are correct, we have:
- on the reactant side: m(AB)+m(CD)= 15g + 35g = 50g
- on the product side: m(AC)+m(BD)= 40g + 10g = 50g
so, we have the same mass on both sides of the equation, and the law of conservation of mass is satisfied.
Answer:
B is the answer on edge
Explanation:
B: The amount of CD is 35 g, and the amount of AC is 40 g.
A rock has a density of 2 g/mL and a mass of 17.5 g. What is the volume of the rock?
HELP PLEASE
Answers
HELP pleaseee which nucleus completes the following equation?
Answers
Answer:
its D
Explanation:
i just got it correct on a. p. e. x. :)
A 100 L ball is blown up inside at 200K. It is then taken outside in the hot sun, and the volume increases to 150 L. What is the new temperature?
Answers
Answer:
Temperature, T2 = 300 Kelvin
Explanation:
Given the following data;
Initial volume = 100 Liters
Initial temperature = 200 Kelvin
Final volume = 150 Liters
To find the final temperature T2, we would use Charles' law.
Charles states that when the pressure of an ideal gas is kept constant, the volume of the gas is directly proportional to the absolute temperature of the gas.
Mathematically, Charles is given by;
[tex] \frac {V}{T} = K[/tex]
[tex] \frac{V1}{T1} = \frac{V2}{T2}[/tex]
Making T2 as the subject formula, we have;
[tex] T_{2}= \frac{V_{2}}{V_{1}} * T_{1}[/tex]
Substituting into the formula, we have;
[tex] T_{2}= \frac{150}{100} * 200[/tex]
[tex] T_{2}= 1.5 * 200 [/tex]
Temperature, T2 = 300 Kelvin
The three main stages to the memory process are encoding, storage, and retrieval.
A.True B.False
Answers
Answer:
A
Explanation:
Answer:
a- true
Explanation:
i did the test and its correct
Auntie Sarah mops the floor by applying a force of 9N at an angle of 60° to the floor, How much work has she done
after mopping a total distance of 10m?
Answers
Answer:
9×1/2×10=45J
Explanation:
[tex]w = f \times d \times \cot( \beta ) [/tex]
f=9N
d=10m
cos(B)=1/2
state and explain the disadvantages of anomalous expansion of water
Answers
Answer:
я не знаю старайся изо всех сил
Explanation:
[tex]\huge{\mathbb{\tt { QUESTION↓}}}[/tex]
[tex]\color{green}{\tt State \: and \: explain \: the \: disadvantages}[/tex]
[tex]\color{green}{\tt { of \: anomalous \: expansion \: of \: water}}[/tex]
[tex]\huge{\mathbb{\tt {ANSWER↓}}}[/tex]
[tex]{\boxed{\boxed{\tt { DISADVANTAGES \: of \: anomolous \: expansion \: of \: water }}}}[/tex]
Since the maximum density can be found for a positive temperature, water's own weight will prevent it from freezing from the bottom up. However, the anomalous expansion of water has some negative consequences. ... As the water freezes it expands and can rip pipes open.[tex]{\boxed{\boxed{\tt { What \: is \: the \: state \: of \: anomalous \: expansion \: of \: water? }}}}[/tex]
The anomalous expansion of water is an abnormal property of water whereby it expands instead of contracting when the temperature goes from 4o C to 0o C, and it becomes less dense. The density is maximum at 4 degree centigrade and decreases below that temperature as shown in graph#CarryOnLearning
#JustEnjoyTheSummer
→XxKim02xXhow slow would a 60,000 kg freight car have to roll to have the same momentum as an 80 kg person running 6.5 m/s
Answers
(8 and 2/3) millimeters per second.
That's about 0.02 mile per hour.
How far is it between the cafeteria and the swimming pool
A.
length
B.
volume
C.
distance
D.
displacement
Answers
Explanation:
An object has a weight of 1550N when it is on the surface of a planet of radius R. What will be the gravitational force on the object after it has been moved to a distance of 4R from the surface of the planet?
Answers
Answer:
W = 96.875 N
Explanation:
For this exercise let's use the law of universal gravitation
F = [tex]G \frac{m M }{r^2}[/tex]
we substitute this force in Newton's second law
F = m a
G \frac{m M }{r^2} = m a
a = [tex]G \frac{M}{r^2}[/tex]
This sidewalk we will call it gravity acceleration
g₀ = a
the weight of a body is
W₀ = m g₀
if we change the cario of r ’= 4r
a’= [tex]G \frac{M}{r'^2 }[/tex]
a ’= G \frac{M}{(4r)^2 }
a' = [tex]G \frac{M}{r^2} \ \frac{1}{16}[/tex]
a ’= [tex]\frac{g_o}{16}[/tex]
therefore the weight of the body must be
W = m g = [tex]m \ \frac{g_o}{16}[/tex]
W = W₀ / 16
W = 1550/16
W = 96.875 N