Michael is buying new tile for his bathroom. The bathroom is 6 feet wide and 7 feet long. It costs $1.75 per square foot of material for the bathroom. If Michael goes to the store with $70, will he have enough money to buy the material. Why or why not.

The system of the equation's solution is x = -6 and y = 4 which is determined by graphically.

The system of equations is given in the question as:

y = 1/6 x + 5

4x + 3y = -12

For the first equation, y = 1/6x + 5, we can plug in two values for x and solve for y to find two points on the line. Let's plug in x = 0 and x = 1 to find two points:

When x = 0, y = 1/6(0) + 5 = 5. So the point (0, 5) lies on the line.

When x = 1, y = 1/6(1) + 5 = 5 + 1/6 = 5 1/6. So the point (1, 5 1/6) lies on the line.

For the second equation, 4x + 3y = -12,

Let's plug in y = 0 and y = 1 to find two points:

When y = 0, 4x + 3(0) = -12.

4x = -12, so x = -3. So the point (-3, 0) lies on the line.

When y = 1, 4x + 3(1) = -12.

4x + 3 = -12, so x = -4. So the point (-4, 1) lies on the line.

To solve these equations graphically, we plotted the lines on the coordinate plane, found the point of intersection, and then found the coordinates of that point.

Thus, the solution to the system of equations is x = -6 and y = 4.

Learn more about the Linear equations here:

brainly.com/question/13738061

#SPJ1

When resolving an inequality, you can, add the same amount to each side, take away the same amount from each side, multiply or divide each side by the same positive amount.

The complete question is,

How do you resolve an inequality equation?

To learn more about Inequalities refer to:

https://brainly.com/question/24372553

#SPJ1

Answer:

y=-3x-1, or 3x+y=-1

Step-by-step explanation:

well uh hopefully you don't need this

Answer: y=-3x+

Step-by-step explanation:

take the slope and the y and plug it into the equation y=mx+

There are only prime factors of the number 7 that are possible which are 1 and 7.

It is a method for dividing a polynomial into pieces that will be multiplied together. At this moment, the polynomial's value will be zero.

Prime factorization is the process of expressing a number as the sum of all its prime factors. In prime factorization, each and every integer is a prime number.

Factors can be found using either division or multiplication. Rules of divisibility can also be used.

There are only prime factors of the number 7 that are possible which are 1 and 7.

More about the factorization link is given below.

https://brainly.com/question/6810544

#SPJ4

AAA ( Angle - Angle - Angle) congruence rule is one of congruence postulate but not preferable, for showing the similarity in two triangles

Two triangles are said to be congruent if one can be superimposed on the other exactly by rigid body motion, and the congruence theorem gives the conditions under which this occurs.

AAA Congruence rule:

It is stands for angle-angle-angle Congruence rule. When all three angles of one triangle is equals to the corresponding angles of another triangle. but it is possible if and only if the corresponding sides of both triangles are equal and when all three sides of two triangles are equal to each other then we use SSS Congruence rule. So, it not considered as preferable congruence rule . For example, In ∆ABC and ∆PQR

all three angles of ∆ABC is equal to corresponding angles of ∆PQR. So,∆ABC and ∆PQR are congruent.

To learn more about AAA (angle-angle-angle) Congruence rule, refer:

https://brainly.com/question/29792706

#SPJ4

There are three terms  in the following expression 7x² 5x 5  This means that for every x in the expression, 5 will be multiplied by it

The coefficient of x in the expression 5x³ 7x² is 5. This means that for every x in the expression, 5 will be multiplied by it. To calculate the coefficient of x, we need to first expand the expression. The expanded form of the expression 5x³ 7x² is 5x³ + 7x². Here, we can see that 5 is multiplied by x three times and seven is multiplied by x twice. This indicates that the coefficient of x is 5. This can be understood by considering the following example:

Let's say we have the expression 5x³ 7x² = 5x³ + 7x².

Here, 5 is multiplied by x three times and seven is multiplied by x twice. This means that the coefficient of x is 5. This can be written as 5x³ + 7x² = 5x³ + 7x x 1 = 5x(x² + x). Hence, the coefficient of x in the expression 5x³ 7x² is 5.The coefficient of x in the expression 5x³ 7x² can be calculated using the following steps:

Expand the expression 5x³ 7x².

The expanded form of the expression is 5x³ + 7x².

Here, we can see that 5 is multiplied by x three times and seven is multiplied by x twice. This indicates that the coefficient of x is 5.

Learn more about expression here

brainly.com/question/14083225

#SPJ4

Answer:

2 linear equations can only have 1 solution.

Step-by-step explanation:

⭐ What is a linear equation?

⭐What does "solution" mean?

Thus, when 2 linear equations intersect, they can only have 1 solution, because straight lines can only meet at 1 point.

AAS (Angle-Angle-Side) is the basic congruence criteria for proving the congruence ( similarity) of two triangles.

Two triangles are said to be congruent if all three corresponding sides are equal and all three corresponding angles are equal.

The basic terms of the agreement are as follows.

Now let's talk about AAS Consensus Criteria.

AAS Congruence Criteria: AAS Criterion stands for Angle-Angle-Side Criterion. According to the AAS criterion, two triangles are congruent if any two angles and excluded sides of one triangle are equal to the corresponding angles and excluded sides of the other triangle.

To learn more about AAS Congruence postulate, refer:

https://brainly.com/question/28039171

#SPJ4

the probability of risk increases with the extension of supply chain. The more we enlarge our business the more possibility of risk.

A supply chain refers a system of connection of the business elements such as raw materials, products, resources, profit, loss as well as all the activities of a running business organization.

the extent of possibility of occurring unexpected incident in a business. while going on with our business, we wish to extend our organization so as to earn reputation as well as gaining outstanding outcomes. But at the same time the chance of getting bad outcomes rises. It is termed as probability of risk.

hence, the above expression risk rises with increasing supply chain is true.

to know more about supply chain and risk visit:

https://brainly.com/question/18793688

#SPJ4

The solution of the given quadratic equation is  x = (- 7 ± √(65)) / (2)

The meaning of quadratic equation is any equation containing one term in which the unknown is squared and no term in which it is raised to a higher power.

Given is a quadratic equation,

For this case, the first thing we must do is rewrite the polynomial:

x² + 7x - 4 = 0

We use the resolver to solve the problem using quadratic formula;

x = (- b ± √(b² - 4 × a × c)) / (2 × a)

Where,

a = 1

b = 7

c = -4

Substituting the values:

x = (- 7 ± √((7)² - 4 × (1) × (- 4))) / (2 × (1))

x = (- 7 ± √(49 + 16)) / (2×(1))

x = (- 7 ± √(65)) / (2)

Hence, The value of x is (- 7 ± √(65)) / (2)

For more references on quadratic equation, click;

https://brainly.com/question/17177510

#SPJ4

Let x= the co-efficient of x^3-1. So the co-efficient of given function is x=1.

The term "coefficient" refers to a number or symbol that multiplies another number or symbol (used as a mathematical variable).

An amount multiplied by a variable is known as a coefficient. As an illustration, 6z stands for 6 times z. Since z is a variable, 6 is a coefficient. For variables without a value, the coefficient is 1.

Let x= the co-efficient of x^3-1. So the co-efficient of given function is x=1.

The term multiplied with x^3 is the co-efficient of this expression. As there is not term with x^3 so it is 1.

To learn more about co-efficient visit the link:

https://brainly.com/question/1038771

#SPJ4

The graph of the function h(x) is attached below.

What is a function?

A mathematical phrase, rule, or law that establishes the link between an independent variable and a dependent variable (the dependent variable). In mathematics, functions exist everywhere, and they are crucial for constructing physical links in the sciences.

Given function is h(x) = √(x-2) + 3

The radical function is always positive.

Therefore,

x - 2 ≥ 0

x ≥ 2

The domain of the function is [2, ∞)

The value of h(x) is at the lowest value of x that is x = 2.

h(2) = √(2-2) + 3

h(2) = 3

The range of the function is [3, ∞)

The starting point of the function is (2,3).

To learn more about graph, click on below link:

https://brainly.com/question/14813590

#SPJ1

Answer:6 dollars

Step-by-step explanation:

1 dozen=12 oranges

3 dozen=36 oranges

36 divided by 6=6

6 times 1= 6 dollars

Sam spent two-fifth of his work day by answering email. He works for 9 hours.

Steps to translate and solve a word problem using algebraic expressions:

- Assign the unknowns to variables

- Translate the word into operators plus, less, multiply, or division

- Isolate the unknown

In the given problem, let p is the variable to express the total hours Sam worked yesterday.

He spent two-fifth of hi work day by answering email = 2/5 p

He spent 3.6 hours answering email yesterday, means:

2/5 p = 3.6

p = 5 x 3.6/2 = 9 hours

Hence, Sam worked for 9 hours.

Learn more about variables here:

https://brainly.com/question/28651633

#SPJ4

Linear equations are one-degree equations. It is a straight-line equation. A linear equation with parameters a and b equal to zero has the conventional form ax + by + c = 0.

The graph of a two-variable inequality is the set of points that describe all solutions to the inequality. The coordinate plane is split in half by a boundary line created by a linear inequality, with one-half representing the solutions to the inequality.

It's a line with a shaded side on one side to show which xy pairings are the inequality's solutions.

Following steps to graph inequalities on a calculator:

1) Press the [Y=].

2) Press [3] [X,T,θ,n] [+] [2] on Y1.

3) Press [◄] six times until the symbol to the left of Y1 is flashing.

4) Press [ENTER] [▼] to select the Line area.

5) Press [►] repeatedly until a triangle pointing to the lower part is displayed.

6) Press [▼] [ENTER].

7) This will change the graph style to shade below the function (this style was chosen because the solution set consists of all real numbers below the line of the y= equation).

To know more about linear equation refer to:

brainly.com/question/28732353

#SPJ4

The Median of 23 will be 23.

How to calculate the Median?

A data set's median value is the point where 50% of the data points have values that are lower or equal to it, and 50% of the data points have values that are higher or equal to it. In a list of odd numbers, one would select the middle number with an equal number of numbers on either side of it to determine the median value. The numbers should be arranged in order, typically from lowest to highest, before calculating the median.

The middle pair must be identified, added, then divided by two in order to calculate the median value in a list of even integers. Once more, group the figures from lowest to highest.

The median will be the average of the two middle numbers, in our questions 23 and 23, the mean of which is 23 because there are an even number of values.

So the final answer will be 23.

To learn more about Median, visit: https://brainly.com/question/11237736

#SPJ4

Answer: It would take the snake approximately 14 hours to travel 686 centimeters

Step-by-step explanation:

At a rate of 49 centimeters per hour, it would take the snake approximately 14 hours to travel 686 centimeters. To find this, we can divide the distance the snake needs to travel by the rate at which it can travel to find the time it would take: 686 centimeters / 49 centimeters/hour = approximately 14 hours

7 pens are obtained by adding 5 and 2. We receive 5 back after subtracting 7 pens and 2 pens. The procedures of addition and subtraction are reversed in this case.

Given,

Inverse operations;

Inverse operations, such as addition and subtraction, multiplication and division, are pairs of mathematical operations where one operation reverses the effect of the other. The term "inverse" refers to the reciprocal of a number, i.e., x - 1 = 1 / x. One results from multiplying a number by its reciprocal, or inverse.

Examples for inverse operations;

We get 7 pens when we mix 5 and 2. We now have 5 pens left after subtracting 7 pens and 2 pens. Addition and subtraction are inverse operations in this situation.

Learn more about inverse operations here;

https://brainly.com/question/12425007

#SPJ4

The documents needed for SSS loan sickness benefit are as follows :

                 - Driver’s License

                 - Passport

                 - Voter’s ID Card

                 - National Bureau of Investigation (NBI) Clearance

                 - Postal Identity Card

                 - Any other government-issued (secondary) ID      cards/documents

                 - Laboratory, X-ray, ECG, and other diagnostic results

                 - Operating room/clinical record that will support the diagnosis

For illnesses or injuries that occurred abroad, the issuing nation's official documentation must include an English translation and be properly authenticated by the Philippine Embassy or Consulate Office or properly certified by a notary public of the receiving nation.

To learn more about loan here:

https://brainly.com/question/13580545

#SPJ4

Answer:

C. BA ≅ DA

Step-by-step explanation:

⭐ What is the HL theorem?

✔️In this problem, it is already established that ΔABC and ΔADC are right triangles because they have a right angle.

✔️ΔABC and ΔADC have congruent hypotenuses because they both share hypotenuse AC, and by the reflexive property of congruence, AC ≅ AC

❌There is no indication that their corresponding legs are congruent, and that is what we need for the HL theorem.

The only answer option that mentions their corresponding legs being congruent is option C.

A three-term expression is called a trinomial.

Math is a powerful tool that can be used to solve a range of problems. From simple arithmetic to complex equations, math provides us with powerful tools to explore the world around us. One such tool is the trinomial, a three-term expression that can be used to represent a wide variety of mathematical problems. In this essay, we will explore the possibilities of trinomials, examining their structure, uses, and potential applications.

Trinomials are composed of three terms: a variable, a coefficient, and a constant. Each term can be used to represent a different aspect of a problem. The variable is typically either an x or a y, and is used to represent the unknown quantity in an equation. The coefficient is a number used to modify the variable, and the constant is a number that is not affected by the variable. Together, these three terms form a trinomial, which can be used to represent a wide range of mathematical problems.

Learn more about math expressions:

https://brainly.com/question/4541471

#SPJ4

Answer:

(1) The answer is given in the paper.

(2) The answer is given in the paper.

(3) PT = 21.26 cm

Step-by-step explanation:

(1) the paper says the answer is 7.81 cm

(2) the paper says the answer is 42 cm

(3) The work is in the image that is attached to this response.

The mean formula in statistics for a set is defined as the sum of the observations divided by the total number of observations.

One of the most significant and often employed metrics of central tendency is the mean. In mathematics, there are various different kinds of means. In statistics, the mean is the product of all the values in a set of data divided by the total number of values in the data for a particular set of observations.

To put it another way, calculating the mean of a data set only requires adding up all the values and dividing the result by the total number of values.

However, depending on whether grouped or ungrouped data is provided, the basic approach and formulae change. Ungrouped data is a collection of random observations, whereas grouped data is a collection of individual observations of a variable aggregated into separate groups.

To know more about the mean visit: brainly.com/question/29895356

#SPJ4

To put it another way, all that is necessary to determine the mean of a set of data is to sum up all the values and divide the total by the number of values.

However, the fundamental approach and equations vary according on whether grouped or ungrouped data are presented. Ungrouped data is a collection of arbitrary observations, whereas grouped data is a collection of distinct groupings of individual observations of a variable.

By applying direct proportion, the value of y when x is 17 is equal to 68.

Mathematically, a direct proportion or direct variation can be represented the following mathematical expression:

y = kx

Where:

Next, we would determine the constant of proportionality (k) as follows:

k = y/x

k = 156/39

k = 4

Now, we can calculate the value of y when x is 17;

y = kx

y = 4 × 17

y = 68.

Read more on proportionality here: brainly.com/question/12866878

#SPJ1

Answer:

the result of subtracting (3x^3 −2x^2 +6x−1) from the sum of (2x^3 −3x+2) and (5x^2 +4x−6) is −x^3 +3x^2 +7x−5.

Step-by-step explanation:

To find the result of subtracting (3x^3 −2x^2 +6x−1) from the sum of (2x^3 −3x+2) and (5x^2 +4x−6), we can first add the two given expressions to find the sum, and then subtract the third expression from that sum.

The sum of (2x^3 −3x+2) and (5x^2 +4x−6) is:

(2x^3 −3x+2) + (5x^2 +4x−6) = 2x^3 +5x^2 −3x+4x −6 = 2x^3 +5x^2 +x−6

Subtracting (3x^3 −2x^2 +6x−1) from this sum gives us:

(2x^3 +5x^2 +x−6) − (3x^3 −2x^2 +6x−1) = (2x^3 −3x^3) + (5x^2 −2x^2) + (x+6x) − (−1−6) = −x^3 +3x^2 +7x−5

Therefore, the result of subtracting (3x^3 −2x^2 +6x−1) from the sum of (2x^3 −3x+2) and (5x^2 +4x−6) is −x^3 +3x^2 +7x−5.

Answer:

no solutions

Step-by-step explanation:

y = -x + 4

y=-x+1

-x+1 = -x+4  ==> since y=-x+1 and y=-x+4, -x+1=-x+4

-x+1-1 = -x+4-1  ==> isolate x on one side by subtracting 1 on both sides

-x = -x+3

-(-x) = -(-x+3)

x = x - 3  ==> this isn't equal since a number won't have the same value if

                     you take away 3 from it.

Hence, there are no solutions.

Answer:

There is no solution

Step-by-step explanation:

y = -x + 4

y=-x+1

If we solve

-x + 4 = -x +1

Add x to both sides and it will be 0

So, there is no solution!

Answer: the tradition is to use (x, y) as the order of the coordinate pair locating a point on a plane

Step-by-step explanation: A two-axis system of east-west and north-south was defined using the algebra coordinate system created by mathematician René Descartes in the 1600s

By analyzing and applying correct method we can solve for any given Y problem.

Analysis is the process of carefully examining something difficult in order to comprehend it or identify its key characteristics.

Explaining, rephrasing, or otherwise demonstrating your own understanding of something is the act of interpretation. An interpreter is a person who interprets from one language into another for the purpose of explaining what is being said to a non-native speaker.

Let any problem is represented as Y. We can solve Y problem by analyzing the situation that is presented in the problem and by applying right method or formula to get required solution of given problem.

To learn more about analysis visit the link:

https://brainly.com/question/1859113

#SPJ4

(3,0) is an x-intercept of the continuous function in the table.

If the graph of a function crosses the x-axis, then the function has an x-intercept. The x-intercept(s) of a function are called the zeros or the roots of the function.

If the graph of function crosses the y-axis, then the function has a y-intercept. A function can have at most one y-intercept.

Given that,

The table with x as the domain and f(x) as the range.

To find the x-intercepts, we need to find all the x-values that support the equation; f(x) = 0. An x-intercept is the first component of the ordered pair (k,0). Where k is any real number.

A y-intercept is the second component of the ordered pair (0,c), where c is any real number.

From the table provided, stated that:

So, the x-intercept becomes: (3,0).

To know more about x-intercept refer to:

https://brainly.com/question/17932786

#SPJ1

The complete question is as follows:

Which is an x-intercept of the continuous function in the table? (0,-6) (3,0) (-6, 0) (0, 3)

Test value for a test of the difference between these two population proportions would be 2.44

What is Proportion?

A proportion in math is when two ratios are equivalent, that means they are equal to each other.

To calculate the test value for the difference between the two population proportions, you will need to first calculate the sample proportions for each group.

The sample proportion for the group of students attending 2-year colleges is 105/300 = 0.35.

The sample proportion for the group of students attending 4-year universities is 20/225 = 0.089.

Next, you can use these sample proportions to calculate the test value using the following formula:

      test value =  [tex]\frac{p1-p2}{\sqrt{[(p1(1-p1)/n1) + (p2(1-p2)/n2)]} }[/tex]

where p1 is the sample proportion for the first group, p2 is the sample proportion for the second group, n1 is the sample size for the first group, and n2 is the sample size for the second group.

Plugging in the values from the problem, we get:

test value = [tex]\frac{(0.35 - 0.089)}{\sqrt{[(0.35(1-0.35)/300) + (0.089(1-0.089)/225)]} }[/tex]

Simplifying this expression gives us a test value of approximately 2.44. This is the test value for the difference between the two population proportions.

To know more about Proportion visit,

https://brainly.com/question/870035

#SPJ4