The average atomic mass of her sample is 114.54 amu
Let the 1st isotope be A
Let the 2nd isotope be B
From the question given above, the following data were obtained:
Abundance of isotope A (A%) = 59.34% Mass of isotope A = 113.6459 amuMass of isotope B = 115.8488 amuAbundance of isotope B (B%) = 100 – 59.34 = 40.66%Average atomic mass =?The average atomic mass of the sample can be obtained as follow:
[tex]Average \: atomic \: mass \: = \frac{mass \: of \: A \times A\%}{100} + \frac{mass \: of \: B \times B\%}{100} \\ \\ Average \: atomic \: mass \: = \frac{113.6459\times 59.34}{100} + \frac{115.8488\times 40.66}{100} \\ \\ Average \: atomic \: mass \: = 114.54 \: amu \\ \\ [/tex]
Thus, the average atomic mass of the sample is 114.54 amu
Learn more about isotope: https://brainly.com/question/25868336
How many moles does 205 g of helium,He, contain ?
Answer:
4.002602
Explanation:
Seems Am Converting Between Grams Helium And Mole.
The store paid 4.50 for a book and sold it for $7.65.what is the profit as a percent of the cost to the store? A. 3. 15% b. 58.8% c. 70% d. 315%
Answer: This would be C.) 70%
Explanation:
Equation for the incomplete combustion of methanol
Answer:
The basis for incomplete combustion is that instead of carbon dioxide being produced alongside water, carbon monoxide and carbon is produced instead, the carbon being released as soot. That handily sets the products up for the equation.
And combustion is simply a reaction between a fuel, in this case, methanol and oxygen.
The chemical formula for methanol is CH3OH. Simply write the reactants and products as a chemical equation and balance it, and you have the equation.
Explanation:
[tex]{ \red {\sf{Define \: Transportational}}}[/tex]
2+x=19
Find x
Easy!!
2+17=19
#hope that helps
Answer:
To find the answer you may
2+17=19
Explanation:
so that is the answer I'm sorry,to not give all the solutions
Will mark BRAINLIEST!!
PLEASE ANSWER I HAVE 5 MINS
Answer:
Explanation:
7A 0.2
7B cork
7C Yes because the lighter it is the more likely it will float
7D Density is one of the fundamental scientific principles of life. It can describe any everyday object. Despite its significance, students often struggle to understand what it really is. Density is a measurement of how much space or volume is packed in an object or substance.
8 property means a characteristic or trait that you can use to describe matter by observation, measurement, or combination.
How is a mixture different from a compound?
Answer:
A compound is something like atoms coming together as a team, and a mixture is 2 or more substances mixing together.
Explanation:
The results of Rutherford's gold foil experiment gave him the evidence to conclude that the center of an atom was A) called the nucleus. B) neutral and relatively small. C) positively charged and relatively small. D) a densely packed area containing both positive and negative particles.
Answer:
c)
Explanation:
because alpha particles can go through it
What are three Possible overlaps that can occur during bond formation
Answer:
The Sigma (σ) Bond
S-S Overlapping. In this kind of overlapping, one 's' orbital from each participating atom undergoes head-on overlapping along the internuclear axis. ...
S-P Overlapping. ...
P-P overlapping.
In general, people of __ heritage will be the last to get
white hair.
Answer:
African?
Explanation:
Heart, 5 stars, and Brainiest to first right answer!
Which layer of the atmosphere reflects radio waves back to Earth?
A. Mesosphere
B. Stratosphere
C. Thermosphere
D. Troposphere
Answer:
Thermosphere
Explanation:
More specifically the ionosphere, since the ionosphere is the lower part of the thermosphere.
Hope this helps!
14. Which has the lowest ionization energy?
A. beryllium (Be) B. strontium (Sr) Calcium (Ca) D. magnesium (Mg)
Answer: B. strontium
Explanation: This is due to electrons being further away from the nucleus in strontium.
2. In which state of matter do particles vibrate in place? *
1 point
A. gas
B. solid
C. liquid
solid.................
Answer:
b solid
Explanation:
i know for a fact
How do you out pizza the hut?
ou dissolve a 2.50 g penny in 50.0 mL of HNO3. After reacting overnight, you dilute the blue solution to a volume of 100 ml. You test a sample of this solution, and find that it has an absorbance of 0.12 abs at 635 nm. i Calculate the concentration of Cu
This question is describing an spectrophotometry experiment in which the concentration of copper(II) ions has to be determined when 2.50 g of a copper-rich penny is reacted with 50.0 mL of nitric acid. In addition, the absorbance of a sample of the solution turned out to be 0.12 at 635 nm, so that the concentration was estimated as 12.8 g/L.
First of all, we must recall the Beer's law that can be written as follows:
[tex]A=ebC[/tex]
Whereas A is the absorbance of the sample, e the molar absorptivity, b the cuvette's path and C the concentration. However, this problem is not providing sufficient information to calculate the required concentration, however, similar absorbance experiments have graphed (absorbance vs concentration) calibration curves exhibiting trendlines as the one shown below:
[tex]y=0.009647x-0.003655[/tex]
Thus, since y stands for the absorbance and x for the concentration but in g/L not M (mol/L) for those experiments, we can set y equal to 0.12 so we solve for x as the concentration of the copper(II) ions in the sample:
[tex]y=0.009647x-0.003655\\\\x=\frac{0.12+0.003655}{0.009647}\\\\x=12.8g/L[/tex]
Nevertheless, it would be great if you come up with your own trendline, having clear the units for the absorbance vs concentration graph and thus double check your results because the data was not enough for the time being.
Learn more:
(Beer's law and trendlines) https://brainly.com/question/5093710(Spectrophotometry) https://brainly.com/question/14467788
3. Given 20g of Barium Hydroxide, how many grams of
Ammonium Nitrate would it take for all the Barium Hydroxide
to react? Balance the chemical equation first
The number of grams of ammonium nitrate (NH₄NO₃) it would take for all the barium hydroxide to react is 18.7g
First, we will write the balanced chemical equation for the reaction
The balanced chemical equation for the reaction is
Ba(OH)₂ + 2NH₄NO₃ → 2NH₄OH + Ba(NO₃)₂
This means, 1 mole of barium hydroxide is required to react with 2 moles of ammonium nitrate
Now, we will calculate the number of moles of barium hydroxide present.
Mass of barium hydroxide (Ba(OH)₂) = 20 g
Using the formula
[tex]Number\ of\ moles = \frac{Mass}{Molar\ mass}[/tex]
Molar mass of Ba(OH)₂ = 171.34 g/mol
∴ Number of moles of Ba(OH)₂ present =[tex]\frac{20}{171.34}[/tex]
Number of moles of Ba(OH)₂ present = 0.116727 mole
Now,
Since 1 mole of barium hydroxide is required to react with 2 moles of ammonium nitrate
Then,
0.116727 mole of barium hydroxide will react with 2 × 0.116727 mole of ammonium nitrate
2 × 0.116727 = 0.233454 mole
∴ Number of moles of NH₄NO₃ required is 0.233454 mole
Now, for the mass of ammonium nitrate (NH₄NO₃) required
From the formula
Mass = Number of moles × Molar mass
Molar mass of NH₄NO₃ = 80.043 g/mol
∴ Mass of NH₄NO₃ required = 0.233454 × 80.043
Mass of NH₄NO₃ required = 18.68636 g
Mass of NH₄NO₃ required ≅ 18.7g
Hence, the number of grams of ammonium nitrate (NH₄NO₃) it would take for all the barium hydroxide to react is 18.7g
Learn more on determining mass of reactant required here: https://brainly.com/question/11232389
Which of the following is considered to be matter?
O A. Water
O B. Facts
O C. Energy
D. Theories
bcz the defination of matter is that
anything which occupy space
water can occupy space so it is matterfact :something that you know has happened or is true which doesn't occupy any space so this option is falseenergy : energy is the quantitative property that must be transferred to a body or physical system to perform work on the body, or to heat it. it doesn't occupy any space so this option is falseA theory is a well-substantiated explanation of an aspect of the natural world that can incorporate laws, hypotheses and facts.--it doesn't occupy any space so this option is falseHence , option a is correct
as the ionic compound decreases in size, the melting point __
A. increases
B. decreases
c stays the same
Answer:
A. increase
Explanation:
the smaller the size of the ionic compounds, the more closer they get packed together. This means electrostatic attraction also increases, which means the ionic bonds gets stronger...therefore increases the melting point
A mixture contains 220 mmHg of CO, 350 mmHg of Ne and 840 mmHg of He. What is the total pressure of the mixture
a
1.86 at
b
1.59 atm
c
1.46 atm
d
none of these
Considering the Dalton's partial pressure, the correct answer is option a.: the total pressure of the mixture is 1.86 atm.
The pressure exerted by a particular gas in a mixture is known as its partial pressure. So, Dalton's law states that the total pressure of a gas mixture is equal to the sum of the pressures that each gas would exert if it were alone:
[tex]P_{T} =P_{1} +P_{2} +...+P_{n}[/tex]
where n is the amount of gases present in the sample.
This relationship is due to the assumption that there are no attractive forces between the gases.
In this case, a mixture contains 220 mmHg of CO, 350 mmHg of Ne and 840 mmHg of He. The total pressure of the mixture can be calculated as:
[tex]P_{T} =P_{CO} +P_{Ne} +P_{He}[/tex]
[tex]P_{T} =220 mmHg +350 mmHg+840 mmHg[/tex]
Solving:
[tex]P_{T}[/tex]= 1410 mmHg
Being 760 mmHg=1 atm, then:
[tex]P_{T}=1410 mmHgx\frac{1 atm}{760 mmHg}[/tex]
Solving:
[tex]P_{T}[/tex]= 1.86 atm
Finally, the correct answer is option a.: the total pressure of the mixture is 1.86 atm.
Learn more:
brainly.com/question/14239096?referrer=searchResults brainly.com/question/25181467?referrer=searchResults brainly.com/question/14119417? Which types of batteries are commonly used in laboratory equipments
Answer:
your question is not very clear but I think the answer is either
Primary (non-rechargeable)
Secondary (rechargeable) or
Lithium-ion battery.
Rechargeable li-ion button cell.
Carbon has a half-life of 5,730 years and you found a fossil with 4 atoms of Carbon and 12 atoms of
Nitrogen, how old would it be?
a. 0 years old
b. 5,730 years old
c. 11,460 years old
d. 17,190 years old
Answer:
D. 17,190 years old
the property of matter that determines whether or not an electrical current can pass through it
Need asap thank you
Answer:
c.boron-11
Explanation:
The atomic mass of boron is 10.81 u.
And 10.81 u is a lot closer to 11u than it is to 10u, so there must be more of boron-11.
To convince you fully, we can also do a simple calculation to find the exact proportion of boron-11 using the following formula:
(10u)(x)+(11u)(1−x)100%=10.81u
Where u is the unit for atomic mass and x is the proportion of boron-10 out of the total boron abundance which is 100%.
Solving for x we get:
11u−ux=10.81u
0.19u=ux
x=0.19
1−x=0.81
And thus the abundance of boron-11 is roughly 81%.
Write the IUPAC names for the following compounds.
A block has 73 kg is being pushed and accelerated at rate of 10 m/s. what force is being applied to the block?
A-730 N
B-7.3 N
C-7300 N
D-730 Kg
Answer:
730 N
Explanation:
force =mass×acceleration
force= 73kg × 10 m/s
f=730N
1. Here is a chemical equation: C2H2 + O2 → CO2 + H2O
• A Balance this chemical equation.
• B State what type of chemical reaction this is.
• C What will happen during this reaction besides just CO2 and H2O being released.
• D Discuss how your balanced chemical equation agrees with the law of conservation of mass.
2. Balance each of the reactions listed below. What type of reactions are they? Single-displacement, double-displacement, synthesis, decomposition, or combustion reaction.
• A Na + Cl2 → NaCl
• B Fe + O2 → FeO
Answer:
1) a) 2 C2H2 + 3O2 --> 2CO2 + 2H2O
b) Combustion Reaction
c) Bonds will be broken on the reactant side which will require energy.
d) It agrees with the law of conservation of mass because there are the same amount of molecules of each element on both sides of the equation, meaning mass was not created nor destroyed.
2) a) 2Na + Cl2 --> 2NaCl
Synthesis
b) 2Fe + O2 --> 2FeO
Synthesis
Hope this helps!
Explanation:
To calculate the atoms of an element in a given molecule, we need to multiply stoichiometry by the number that is written on the foot of that element. Therefore, the balanced equation is
2 C[tex]_2[/tex]H[tex]_2[/tex]+ 3O[tex]_2[/tex] [tex]\rightarrow[/tex] 2CO[tex]_2[/tex]+ 2H[tex]_2[/tex]O
What is Balanced equation?Balanced equation is the one in which the total number of atoms of a species on reactant side is equal to the total number of atoms on product side. The mass of the overall reaction should be conserved. There are so many types of chemical reaction reaction like combination reaction, displacement reaction.
a) 2 C[tex]_2[/tex]H[tex]_2[/tex]+ 3O[tex]_2[/tex] [tex]\rightarrow[/tex] 2CO[tex]_2[/tex]+ 2H[tex]_2[/tex]O is the balanced equation
b)Reaction is a Combustion Reaction
c) energy is required for the breaking of bond.
d) It agrees with the law of conservation of mass as the number of atoms of each element on reactant and product side is same.
Therefore, the balanced equation is
2 C[tex]_2[/tex]H[tex]_2[/tex]+ 3O[tex]_2[/tex] [tex]\rightarrow[/tex] 2CO[tex]_2[/tex]+ 2H[tex]_2[/tex]O
Learn more about the balanced equation, here:
https://brainly.com/question/7181548
#SPJ2
The effect of a catalyst is to: change the stoichiometry of the reaction. lower the activation energy of a reaction whereby making it easier for the reactants to get over the energy hump. change the position of the equilibrium. increase the number of collisions between reactants. increase the temperature of the reactants whereby more products are forme
The effect of a catalyst is
Option B(lower the activation energy of a reaction whereby making it easier for the reactants to get over the energy hump)What is a catalystA catalyst allows an alternative reaction pathway that leaves activation energy than the uncatalysed reaction. This does not change the frequency of collision.
Frequency of collisionFrequency of collision depend upon concentration of reactant temperatures
Catalyst on activation energyHence, catalyst lowers the activation energy of reaction thereby making it easier for the reactant to get over the energy hump.
For more information on catalyst, visit
https://brainly.com/question/18464572?referrer=searchResults
Why does adding salt allow ice to freeze milk?
A.It increases the freezing point
B.Salt is colder than point
C.It increases the boiling point
D.It decreases the freezing point
Answer:
It increases the freezing point
Explanation:
The salt lowers the temperature at which water freezes. :)
In one to two sentences, describe an experiment that would show that intramolecular forces (attractions between atoms within molecules) are stronger than intermolecular forces (attractions between molecules).(2 points)
An experiment that would show that intramolecular forces are stronger than intermolecular forces will be heating a block of ice in a sealed container then allowing it to change to steam.
Intramolecular forces are the forces of attraction that hold atoms together within a molecule. Intramolecular forces require a high amount of energy to splits atoms or molecules in a chemical bonding.
Intermolecular forces are weaker forces of attraction that occur between molecules. They require lesser energy to splits molecules compared to intramolecular forces.
An experiment that would show that intramolecular forces are stronger than intermolecular forces will be heating a block of ice in a sealed container then allowing it to change to steam.
In the process, the energy required to change the state from ice to steam water is more than intermolecular forces.
Thus, we can conclude that this experiment shows that the intramolecular forces are stronger than the intermolecular forces.
Learn more about Intramolecular forces here:
https://brainly.com/question/13588164
Determine the number of moles in 4.9*10 raise to the power of 24 of Ag
Answer:
4.5425806678891E+22mol
Explanation:
How many moles of chlorine could be produced by decomposing 157g NaCl? 2NaCl --> 2Na+Cl2
By decomposing 157g of NaCl, approximately 1.35 moles of chlorine can be produced.
To determine the number of moles of chlorine that could be produced by decomposing 157g of NaCl, we need to use the molar mass of NaCl and apply stoichiometry.
The molar mass of NaCl is the sum of the atomic masses of sodium (Na) and chlorine (Cl), which is approximately 22.99 g/mol + 35.45 g/mol = 58.44 g/mol.
Now, we can calculate the number of moles of NaCl:
Moles of NaCl = Mass of NaCl / Molar mass of NaCl
Moles of NaCl = 157 g / 58.44 g/mol
Moles of NaCl ≈ 2.69 mol
According to the balanced equation 2NaCl → 2Na + Cl₂, we can see that for every 2 moles of NaCl, we produce 1 mole of Cl₂.
Therefore, using the stoichiometric ratio, we can calculate the number of moles of chlorine produced:
Moles of Cl₂ = (Moles of NaCl / 2) × 1
Moles of Cl₂ = 2.69 mol / 2
Moles of Cl₂ ≈ 1.35 mol
Thus, by decomposing 157g of NaCl, approximately 1.35 moles of chlorine can be produced.
Learn more about chlorine from the link given below.
https://brainly.com/question/19460448
#SPJ2