Miranda Inc manufactures two products, Regular and Premium, and applies overhead on the basis of machine hours. Anticipated overhead and machine hour time for the upcoming accounting period is $640,000 and 160,000 machine hours, respectively. During the accounting period, the actual overhead cost was $620,000 and the actual machine hours were 155,000.
Calculate the predetermined overhead rate, the total overhead cost applied to each product, and the overhead underapplied or overapplied for the accounting period.
The predetermined overhead rate is used to apply overhead to products and is determined using the following formula: Predetermined Overhead Rate = Estimated Overhead Cost ÷ Estimated Activity Level
Using the given data:
Predetermined Overhead Rate = $640,000 ÷ 160,000 machines hours
Predetermined Overhead Rate = $4 per machine hour
Overhead Cost Applied to Products
The overhead cost applied to each product can be calculated as follows:
Product Regular Premium Total Machine hours 30,000, 125,000, 155,000
Overhead cost applied $120,000, $500,000, $620,000
The overhead cost applied to Regular is $120,000 ($4 × 30,000 machine hours) and the overhead cost applied to Premium is $500,000 ($4 × 125,000 machine hours). The total overhead cost applied to both products is $620,000, which is the actual overhead cost for the accounting period.
The overhead underapplied or overapplied can be calculated as follows:
Actual Overhead Cost − Overhead Cost Applied
Actual Overhead Cost = $620,000
Overhead Cost Applied = $620,000
Overhead Underapplied or Overapplied = $0
The overhead cost applied to products is the same as the actual overhead cost, so there is neither overhead underapplied nor overapplied. Therefore, the amount of overhead cost applied to the products is the actual amount of overhead cost for the accounting period.
To know more about Predetermined Overhead Rate visit:
https://brainly.com/question/29829712
#SPJ11
Chapter 2 lists four ways that you can help to protect your client's or your employer's trademark. One is to use the trademark symbol. Which one of the following methods is also listed in the chapter?
a. Distinguish trademarks from other material, perhaps by setting the trademark in a different typeface or by using boldface type for emphasis.
b. Use the trademarked item in various grammatical forms, including as an adjective (Xerox® copiers), a noun (Xeroxes®), and a verb (Xerox 500 copies).
c. Use the plural form (Xeroxes) or the possessive form (Xerox's quality) of the term whenever possible.
d. Consistently use one of the trademark symbols (™ or ®) in references to other trademarked items, whether or not your client or employer owns those trademarks.
e. Include a prominent warning about the civil and criminal penalties for infringing on the protections afforded by trademark law, similar to the FBI warning about copyright that appears at the beginning of rental movies.
Chapter 2 lists four ways that you can help to protect your client's or your employer's trademark. One is to use the trademark symbol.
Another method that is listed in the chapter is to distinguish trademarks from other material, perhaps by setting the trademark in a different typeface or by using boldface type for emphasis. This method helps to differentiate the trademark from other words in the text and to indicate that it is a protected term.
It is important to protect your client's or your employer's trademark from misuse or infringement as it is a valuable asset for the company. Trademarks are used to protect brand names, logos, symbols, and other distinctive signs that are used to identify and distinguish products and services. Trademarks can help to build brand recognition and customer loyalty, which can lead to increased sales and revenue for the company.
Other methods that are listed in Chapter 2 for protecting trademarks include using the trademarked item in various grammatical forms, including as an adjective, a noun, and a verb; using the plural form or the possessive form of the term whenever possible; and consistently using one of the trademark symbols in references to other trademarked items, whether or not your client or employer owns those trademarks.
Additionally, including a prominent warning about the civil and criminal penalties for infringing on the protections afforded by trademark law is another way to help protect your client's or your employer's trademark.
To know more about trademark visit:
https://brainly.com/question/14578580
#SPJ11
Which of the following determinants of business risk would lead to more risk: Select one: a. More stable demand for the product b. More stability in your products price c. More stability in the costs of the inputs you use d. Less obsolescence in the products you produce e. Less price inelasticity of demand
Less price inelasticity of demand would lead to more risk in business. Business risk refers to the potential for loss or damage faced by a company due to factors other than interest rates. This includes many different types of risks, including credit risk, liquidity risk, market risk, and operational risk.
Price inelasticity of demand refers to the relationship between price changes and the quantity of goods demanded. When price inelasticity is high, a small change in price will result in a significant change in demand, and when price inelasticity is low, a large change in price will not significantly affect demand. If a company has less price inelasticity of demand, it means that a small change in the price of a product will significantly affect the demand for that product. This will increase the risk for the company because if the demand decreases, the revenue will decrease as well.
Therefore, less price inelasticity of demand would lead to more risk in business. Business risk is the probability of a company incurring loss or damage as a result of factors other than interest rates. Business risk can be broken down into various types of risk, such as credit risk, liquidity risk, market risk, and operational risk. Various factors affect business risk, including the stability of demand, product price stability, input cost stability, product obsolescence, and price inelasticity of demand. Price inelasticity of demand is the degree to which the quantity of goods demanded varies with price changes. A small change in price will cause a significant change in demand when the price inelasticity of demand is high. In contrast, a significant change in price will not significantly impact demand when the price inelasticity of demand is low. When a company has less price inelasticity of demand, it means that a small change in the price of a product will significantly affect the demand for that product. This can increase the company's risk because if the demand for the product decreases, the company's revenue will also decrease. Therefore, less price inelasticity of demand would lead to more risk in business.
To know more about business visit:
https://brainly.com/question/15826679
#SPJ11
Under normal conditions (65% probability), Plan A will produce a $31,000 higher return than Plan B. Under tight money conditions (35% probability), Plan A will produce $117,000 less than Plan B. What is the expected value of return? (Amounts in parentheses indicate negative values.) Multiple Choice $61,100 ($40,950) ($20,800) $20,150
The expected value of return can be calculated using the main answer and explanation provided below. The expected value of return can be calculated by using the probability and expected cash flow of the plan. For instance, if we talk about Plan A and Plan B,
then the expected value of return for each of them can be calculated as follows return of Plan A: $31,000 x 0.65 + (-$117,000) x 0.35 = $20,150Expected return of Plan B: $0 x 0.65 + $117,000 x 0.35 = $40,950Explanation:Plan A: If normal conditions prevail, Plan A will produce a return of $31,000 higher than Plan B. Therefore, the expected return of Plan A for normal conditions is 65%.Plan B.
If tight money conditions prevail, Plan B will produce a return of $117,000 more than Plan A. Therefore, the expected return of Plan B for tight money conditions is 35%.Expected value of return can be calculated by multiplying the probability with the expected cash flow. Here, we can multiply the probability of each plan with its respective expected cash flow, and then add the two products together. Therefore, the expected value of return is $20,150. Therefore, the correct answer is: ($20,150).
To know more about instance Visit;
https://brainly.com/question/28479537
#SPJ11
You researched Turnkey Investment's financial data and gathered the following information:
Current price per share of stock = $93 Expected market portfolio return = 8.4%
Dividend per share that will be paid next year = $5.13 Risk-free interest rate = 4.8%
Expected annual growth of dividend per share = 6% Stock Beta = 1.82
Calculate the company's cost of equity using the Dividend Growth Model approach. Your answer should be in percent, not in decimals: e.g., 12.34 rather than 0.1234
Increase decimal places for any intermediate calculations, from the default 2 to 6 or higher. Only round your final answer to TWO decimal places: for example, 10.23. Do NOT use "%" in your answer.
The cost of equity for Turnkey Investment is approximately 11.52%, calculated using the Dividend Growth Model approach.
To calculate Turnkey Investment's cost of equity using the Dividend Growth Model approach, we can use the formula:
Cost of Equity = (Dividend per Share / Current Price per Share) + Expected Dividend Growth Rate
First, let's calculate the expected dividend growth rate. Given that the expected annual growth of the dividend per share is 6%, we can convert it to a decimal by dividing it by 100: 6% / 100 = 0.06.
Next, we can substitute the given values into the formula:
Cost of Equity = ($5.13 / $93) + 0.06
Simplifying the equation:
Cost of Equity = 0.055161 + 0.06
Cost of Equity = 0.115161
To express the result as a percentage, we multiply it by 100:
Cost of Equity = 11.5161%
Finally, rounding the answer to two decimal places, the cost of equity for Turnkey Investment is approximately 11.52%.
Learn more about Equity
brainly.com/question/31458166
#SPJ11
Cash had a beginning balance of $206,700. During the month, Cash was credited for $48,000 and debited for $54,900. At the end of the month, the balance is: O $199,800 credit. O $213,600 credit. O $213
At the end of the month, the balance in the cash account, given the beginning balance can be found to be $ 199, 800
How to find the balance ?The Net change in cash can be found by the formula :
Net change in cash = Credits - Debits
Beginning balance: $206,700
Credits: $48,000
Debits: $54,900
Net change in cash = $ 48 000 - $54,900
Net change in cash = -$ 6, 900
The ending balance for cash is therefore :
Ending balance = Beginning balance + Net change
Ending balance = $ 206,700 + ( - $ 6,900)
Ending balance = $ 199, 800
Find out more on cash balance at https://brainly.com/question/29406151
#SPJ4
Is Turo a Disruptive Innovator or Sustaining Innovator. Give
examples as to why you believe it so.
If you do not think Turo is disruptive, propose how it could
be.
In terms of whether Turo is a disruptive or sustaining innovator, the answer is that it is most likely a disruptive innovator. The reason for this is that Turo is fundamentally changing the way that people think about car rental and transportation in general.
Traditionally, car rental has been dominated by large companies that own fleets of vehicles and rent them out to customers at premium prices. Turo is disrupting this model by allowing individuals to rent out their own personal vehicles at much lower prices, creating a more decentralized and democratized car rental industry.
Additionally, Turo is also disrupting the traditional model of car ownership itself. By making it easier and more affordable for people to rent cars when they need them, Turo is making it possible for more people to forego car ownership altogether and rely on rental services instead.
While Turo is definitely a disruptive innovator, there is always room for improvement. One area where the company could continue to innovate and disrupt is by expanding its offerings to include more sustainable and eco-friendly transportation options.
For example, Turo could consider partnering with electric car manufacturers to offer more electric vehicle options on its platform, or it could develop its own electric car rental service to cater to the growing demand for sustainable transportation options.
Know more about eco-friendly here:
https://brainly.com/question/30100247
#SPJ1
When Haley, the landlord for 5604 wagon wheel street, receives money given as a security deposit she may deposit the funds in one three ways. Which is the INCORRECT way to deposit the security deposit?
a. hold the money in a separate interest-bearing Florida Bank, and pay the tenant 75% of any annualized average rate or 5% per year simple interest
b. hold the money in a separate non interest-bearing Florida Bank account and not commingle funds until due to the tenant
c. post a surety bond with the clerk of the circuit court in the county in which the rental property is located
d. hold the money in any bank, credit union or savings and loans institution located in any of the 50 states and may not commingle
Most jurisdictions have specific rules and regulations regarding security deposit handling, and typically require landlords to hold the funds separately in an interest-bearing account or post a surety bond. Therefore, option (d) does not align with standard security deposit practices.
The incorrect way to deposit the security deposit is option (d) "hold the money in any bank, credit union, or savings and loan institution located in any of the 50 states and may not commingle." According to the given options, the correct ways to deposit the security deposit are mentioned in options (a), (b), and (c).Option (a) allows the landlord to hold the money in a separate interest-bearing Florida Bank and pay the tenant a specified percentage of the interest earned. Option (b) allows the landlord to hold the money in a separate non-interest-bearing Florida Bank account without commingling funds.
Option (c) permits the landlord to post a surety bond with the clerk of the circuit court. Option (d) is incorrect because it states that the landlord can hold the money in any bank, credit union, or savings and loan institution located in any of the 50 states without specifying the requirement of keeping the funds separate or not commingling them. However, most jurisdictions have specific rules and regulations regarding security deposit handling, and typically require landlords to hold the funds separately in an interest-bearing account or post a surety bond. Therefore, option (d) does not align with standard security deposit practices.
For more question on security
https://brainly.com/question/30199506
#SPJ8
Compare and contrast the three (3) tariff nomenclatures:
Harmonized System, AHTN, and TAP-AHTN.
Tariff Nomenclature is a type of classification system that is utilized in trade and commerce to regulate imports and exports to different countries. The most frequently used tariff nomenclatures are the Harmonized System, AHTN, and TAP-AHTN.
Tariff nomenclatures are utilized to classify products or goods to make it easier for individuals or companies to identify, assess, and evaluate products according to the quantity and value of import and export.The Harmonized System is a multilingual framework that is utilized to classify products into six-digit codes. The Harmonized System is utilized globally in over 200 nations, including the European Union.
This system aids the government in maintaining proper documentation of all the goods that are imported and exported.AHTN (ASEAN Harmonized Tariff Nomenclature) is a nomenclature structure utilized by ASEAN nations to classify goods. ASEAN is made up of ten countries, and AHTN is used by all of them. The AHTN system makes it simple for these nations to classify their imported and exported products.
In conclusion, the Harmonized System, AHTN, and TAP-AHTN tariff nomenclatures are classification structures used in the world to monitor imports and exports. They vary by the language of usage, the classification system, and the region or country in which they are used.
To know more about frequently visit :
https://brainly.com/question/17272074
#SPJ11
Which of the following address the fluctuation of personal property values during the policy period? Peak Season Limit of Insurance; Value Reporting Form O Functional Building Valuation endorsement; Functional Personal Property Valuation endorsement O Manufacturer's Consequential Loss Assumption endorsement; Manufacturer's Selling Price endorsement O No endorsement or form will modify fluctuations.
Value Reporting Form addresses the fluctuation of personal property values during the policy period.
This is option 2.
The Value Reporting Form endorsement addresses the fluctuation of personal property values during the policy period.
A Value Reporting Form, also known as a Value Reporting Endorsement, is an insurance rider that allows the policyholder to adjust their property insurance coverage limit to reflect changes in the value of their insured assets throughout the policy period.
The amount of insurance that the insurance firm will cover is frequently determined by a “reported value” of covered personal property. The insured is required to report the value of the property during the policy period.
Hence the answer of the question is option 2.
Learn more about fluctuations at:
https://brainly.com/question/30976209
#SPJ11
Assume there are two countries (H and F), and two firms (A and B). Firm A is located in country H and firm B is located in country F. Firms compete in quantities as in the Cournot Duopoly model. Each firm sells its product in country H only. The inverse demand is P=a-(QA+QB), with QA and QB being the quantities sold by each of the two firms, a is a positive constant. There is also a constant marginal cost of production c identical for both firms. a) Find the Nash Equilibrium quantities each firm will sell in country H. Explain using relevant theory and economic intuition. (30%) b) How would your answer in part a) change if firm A faces an additional fixed production cost E. Explain using relevant theory and economic intuition. (20%) c) How would your answer in part a) change if the domestic firm faces an additional fixed production cost E AND firm B receives a production subsidy from country F's government? Explain using relevant theory and economic intuition. (20%) d) Do you think it would be justified for country H to impose a countervailing duty in the situation presented in part c)? Explain using relevant theory and economic intuition. (30%)
a) The Nash equilibrium quantities QA* and QB*
b) The Nash equilibrium quantities QA* and QB* will likely be lower compared to the case without the fixed cost
c) The equilibrium quantities QA* and QB* will be influenced by both the additional fixed cost faced by firm A and the production subsidy received by firm B
d) The justification for imposing a countervailing duty depends on a careful assessment of the specific circumstances, including economic considerations, political considerations, and compliance with international trade regulations.
a) To find the Nash equilibrium quantities, we need to analyze the reaction functions of each firm. In the Cournot Duopoly model, each firm chooses its quantity of output to maximize its profits, taking into account the output chosen by the other firm.
Let's start with firm A's reaction function. Firm A's profit is given by:
πA = (P - c) * QA
To find the optimal quantity for firm A, we differentiate the profit function with respect to QA and set it equal to zero:
∂πA/∂QA = P - c - (QA + QB) * dP/dQA = 0
Substituting the inverse demand function P = a - (QA + QB), we have:
a - (QA + QB) - c - (QA + QB) * (-1) = 0
a - c = 2QA + QB
Similarly, for firm B, the profit function is:
πB = (P - c) * QB
Differentiating and setting the derivative equal to zero, we get:
a - c = QA + 2QB
Now we have two equations:
a - c = 2QA + QB
a - c = QA + 2QB
Solving these equations simultaneously, we can find the Nash equilibrium quantities QA* and QB*.
b) If firm A faces an additional fixed production cost E, its profit function becomes:
πA = (P - c) * QA - E
The reaction function for firm A now becomes:
a - c - E = 2QA + QB
The additional fixed cost E reduces firm A's profit. As a result, firm A would reduce its quantity of output in order to compensate for the higher production cost. The Nash equilibrium quantities QA* and QB* will likely be lower compared to the case without the fixed cost.
c) If the domestic firm (A) faces an additional fixed production cost E and firm B receives a production subsidy from country F's government, the reaction functions would be modified accordingly.
For firm A, the reaction function becomes:
a - c - E = 2QA + QB
For firm B, the profit function remains the same, but the subsidy would effectively lower its production cost, resulting in a higher profit margin.
The subsidy to firm B gives it a competitive advantage, making it more profitable to produce and sell its product. This advantage would lead firm B to increase its quantity of output, while firm A would likely reduce its quantity in response to the increased competition and higher production cost. The equilibrium quantities QA* and QB* will be influenced by both the additional fixed cost faced by firm A and the production subsidy received by firm B.
d) Whether it would be justified for country H to impose a countervailing duty in the situation presented in part c) depends on several factors, including economic and political considerations.
A countervailing duty is a tariff imposed on imported goods to offset the effects of subsidies provided by the exporting country. In this case, if firm B receives a production subsidy from country F's government, it can be seen as an unfair trade practice that distorts the level playing field between the two firms.
Imposing a countervailing duty would help mitigate the competitive disadvantage faced by firm A due to the subsidy received by firm B. By imposing a tariff on firm B's product, country H can level the playing field and reduce the distortion caused by the subsidy. This action would provide a fairer market environment for both firms.
However, the decision to impose a countervailing duty involves considering various factors, such as the potential impact on trade relations between the two countries, the economic and political consequences of such a decision, and whether it aligns with international trade rules and agreements.
Overall, the justification for imposing a countervailing duty depends on a careful assessment of the specific circumstances, including economic considerations, political considerations, and compliance with international trade regulations.
To know more about Nash equilibrium, visit the link : https://brainly.com/question/29398344
#SPJ11
Assume that value of a company’s assets is V0 = 25 million and the volatility of asset value is σv = 0.25 per annum. The debt that will have to be repaid in two year is D = 18 million. The risk-free rate is 2% per annum, continuously compounded. Use Merton’s model to find the following. a. The equity value E0 and equity volatility σE (2 marks) b. The market value of debt D0, and the expected loss from default (2 marks) c. The probability of default and the recovery rate
The equity value E0 and equity volatility σE Using Merton's model, the equity value can be calculated using the formula:
E0 = V0 − D0 = V0 − D0exp[−(r + σE2/2)T + σEZ]
Where:V0 is the total asset valueD0 is the market value of debt T is the time to maturity r is the risk-free interest rate.
Z is the standard normal random variableσE is the equity volatility Using the given values,
V0 = 25 millionσ
v = 0.25
per annum D = 18
million r = 2% per annum
T = 2 years
E0 = 25 million - D
0exp[−(0.02 + σE²/2) × 2 + 0.25 × Z]Putting the values, we get,E0 = 9.714 + 8.286ZσE can be calculated as:σE = σv E0 / (E0 + D)Substituting the value of E0 and solving,σE = 0.7227 b. The market value of debt D0, and the expected loss from default The market value of debt, D0, can be calculated using the formula:D0 = Dexp[−rT] Substituting the given values,D0 = 16.5694The expected loss from default is given as: L = D × (1 − R) × N (d2).
Where: N (d2) is the probability of defaultd2 = [ln (D/E0) + (r − σE2/2)T] / (σE √T)R is the recovery rate Substituting the given values, L = 6.2764c. The probability of default and the recovery rate The probability of default is given by the formula: N (-d1)where:d1 = [ln (V0/D) + (r + σE2/2)T] / (σE √T)Substituting the given values, we get,d1 = -0.4480d2 = -0.7816N (-d1) = N (0.4480) = 0.3269The recovery rate, R can be calculated using the formula: R = (V0 - D0) / V0Substituting the values, R = 0.3312Therefore, the probability of default is 0.3269, and the recovery rate is 0.3312.
To know more about volatility visit:
https://brainly.com/question/30905318
#SPJ11
Non-GAAP disclosures ($ in millions) 2019A
GAAP Operating profit 809
Restructuring expenses 12
Non-GAAP Operating profit 821
GAAP Net income 541
Restructuring expenses 12
Losses on investments 4
Tax impact of non-GAAP items (6)
Non-GAAP Net income 551
Based on the information provided, calculate 2019 ‘Operating expenses’ excluding non-GAAP items:
A. $484 million
B. $480 million
C. $508 million
D. $512 million
Based on the information provided, the calculation for 2019 'Operating expenses' excluding non-GAAP items is $480 million (option B).
To calculate the operating expenses excluding non-GAAP items, we need to start with the GAAP operating profit and subtract any non-GAAP adjustments. In this case, the GAAP operating profit for 2019 is given as $809 million. However, there are restructuring expenses of $12 million, which need to be excluded.
So, the calculation would be:
GAAP Operating profit - Restructuring expenses = Operating expenses excluding non-GAAP items
$809 million - $12 million = $797 million
Therefore, the 2019 'Operating expenses' excluding non-GAAP items amount to $797 million. Among the given answer options, the closest value is $480 million (option B), making it the correct answer.
Learn more about Operating expenses here:
brainly.com/question/14697297
#SPJ11
Significant noncash financing transactions Multiple-Choice (2.5 Points) O A. Should not be disclosed in the body of a statement of cash flows but should appear elsewhere C B. Are deducted from netincome to determine cash provided by operating activities on a :tatement of cash flows C C. Should not be disclosed at all since they are irrelevant to actual performance O D. Are included parenthetically on a statement of cash flow:
1A. Should not be disclosed in the body of a statement of cash flows but should appear elsewhere. Significant noncash financing transactions refer to transactions that involve the issuance or retirement of debt or equity instruments, but do not directly involve cash.
In a statement of cash flows, the primary purpose is to report the cash inflows and outflows from operating, investing, and financing activities. Noncash financing transactions, although significant, are not included in the body of the statement of cash flows because they do not involve the actual flow of cash.
However, it is important to disclose these significant noncash financing transactions in the financial statements or footnotes. They should be reported separately to provide transparency and ensure that users of the financial statements have a complete understanding of the company's financial position and the impact of these transactions.
Examples of significant noncash financing transactions include the conversion of debt into equity, the issuance of stock for the acquisition of assets or other businesses, the retirement of debt through the issuance of equity, and the issuance of debt in exchange for assets.
By disclosing these transactions elsewhere in the financial statements or footnotes, users can assess the impact of these noncash financing activities on the company's overall financial performance and make more informed decisions.
for more questions on cash flows
https://brainly.com/question/735261
#SPJ11
You are asked to approve or deny a request to purchase a new printer which costs $28,000 now but will increase efficiency and save $6500 cash/year for the next 6 years and can be sold after 6 years for $2,000. The discount rate is 12%
It is a wise decision to consider the purchase of a new printer that costs $28,000 now, but will increase efficiency and save $6500 cash per year for the next six years and can be sold after six years for $2,000.
The discount rate is 12%. To determine whether or not to approve the request to purchase the printer, we must first compute the net present value of the investment (NPV).
NPV formula is: Net Present Value = Present Value of Future Cash Flows – Initial Investment
Firstly, let's determine the annual cash inflow using the formula below:
Annual cash inflow = Annual savings – Depreciation Annual savings = $6500
Depreciation = (Cost – Salvage Value) / Useful Life= ($28,000 - $2,000) / 6= $4,333.33
Annual cash inflow = $6500 - $4333.33= $2166.67
Next, calculate the present value of annual cash inflow for 6 years:
PVA = CF [((1 + r)n – 1) / (r(1 + r)n)] Where r = discount rate, n = number of years, and CF = cash flow
PVA = $2166.67 [((1 + 0.12)6 – 1) / (0.12(1 + 0.12)6)]PVA = $9739.77
Now, let's calculate the present value of the initial investment:
PVI = Cost – Salvage Value / (1 + r)n= ($28,000 - $2,000) / (1 + 0.12)6= $12,234.06
Thus, Net present value (NPV) = Present Value of Future Cash Flows – Initial Investment= $9,739.77 - $12,234.06= -$2,494.29
Now that we have computed the net present value of the investment, we can make a decision. As you can see from the NPV computation, the value is negative. As a result, the investment does not seem to be profitable. So, based on the NPV outcome, the request for purchasing a new printer can be denied. If the printer does not have a net present value greater than zero, it would not be worthwhile to purchase it. It demonstrates that the initial cost of $28,000 outweighs the savings and future benefits of $9,739.77 over six years, including the salvage value of the printer after six years. Because the printer's NPV is negative, purchasing the printer would result in a loss of $2,494.29. As a result, the purchasing request should be denied.
Conclusion:
Therefore, based on the Net present value (NPV) calculation, the purchase of the new printer should be denied. Because the printer's NPV is negative, purchasing the printer would result in a loss of $2,494.29. If the printer does not have a net present value greater than zero, it would not be worthwhile to purchase it. It demonstrates that the initial cost of $28,000 outweighs the savings and future benefits of $9,739.77 over six years, including the salvage value of the printer after six years.
To know more about Net present value (NPV) visit:
brainly.com/question/29525757
#SPJ11
Speculator is willing to create an arbitrage strategy on the derivative market. The spot price of coupon paying bond is 500 USD. The bond has a remaining life of 1.5Y, nominal value of 1,000 USD and interest of 5% p.a. under semiannual compounding. Coupons are paid each 6M (incl. the next coupon that will be paid in 6M period). The spot risk-free market rates pa. under continuous compounding for 6M, 1Y and 1.5Y maturity are 4%, 6% and 8% respectively. What should be speculator's arbitrage strategy if speculator could write / enter a 1Y forward contract with: a. a delivery price of 510 GBP, b. a delivery price of 400 GBP.
a)a delivery price of 510 GBP:they will make a risk-free profit of -14.72 GBP
b)a delivery price of 400 GBP:it will enable them to make a risk-free profit of 95.28 GBP.
Arbitrage strategy is an effective trading strategy that is often used in financial markets. The strategy seeks to exploit inefficiencies or discrepancies in prices between two or more markets. When such discrepancies occur, traders take advantage of them by simultaneously buying and selling assets to make a risk-free profit. The question can be solved using the following steps:
a. Delivery price of 510 GBP
The first step is to calculate the theoretical forward price of the bond. The theoretical forward price is calculated as follows:
FP = [S / (1 + r)^n] + [C / (1 + r)^n]
Where FP = theoretical forward price of the bond, S = spot price of the bond, r = risk-free rate of interest, n = time to delivery, and C = coupon payment.
For the bond, the theoretical forward price can be calculated as follows:
FP = [500 / (1 + 0.06)^1] + [25 / (1 + 0.06)^1] = 495.28 USD
Therefore, if the speculator enters a 1Y forward contract with a delivery price of 510 GBP, they will make a risk-free profit of:
495.28 - 510 = -14.72 GBP
b. Delivery price of 400 GBP
For a delivery price of 400 GBP, the speculator will make a risk-free profit of:
495.28 - 400 = 95.28 GBP
Therefore, the speculator's arbitrage strategy should be to enter the 1Y forward contract with a delivery price of 400 GBP. This will enable them to make a risk-free profit of 95.28 GBP.
Learn more about arbitrage strategy at:
https://brainly.com/question/32742399
#SPJ11
a series of sequential steps that must be carried out to produce a given product is called:
A series of sequential steps that must be carried out to produce a given product is called a manufacturing process. The manufacturing process involves the conversion of raw materials into finished goods that can be sold to the end consumer.
The manufacturing process can be divided into several sequential steps, including the following: Design: In this step, the product is designed using CAD (computer-aided design) software. The design is created in 3D and includes all the necessary details like dimensions, materials, etc. Production planning: Once the design is ready, the next step is to plan the production process. This involves deciding on the materials, machines, and equipment required for the production process. Material procurement: In this step, the raw materials required for the production process are procured.
This may involve sourcing the materials from suppliers or manufacturing them in-house. Production: The production step involves actually manufacturing the product. This may involve several sub-steps like cutting, shaping, welding, and assembling the various components of the product. Quality control: In this step, the finished product is checked for quality to ensure that it meets the required standards. Packaging and shipping: The final step is to package the finished product and ship it to the end consumer. This may involve several sub-steps like labeling, packing, and shipping the product to the desired location.
Know more about sequential steps, here:
https://brainly.com/question/14453698
#SPJ11
Abigail, Bernard, Cornwallis, and Douglas each derive a distinct amount of utility from consuming apples and bananas. Initially, apples cost $2, bananas cost $1, and each person receives a weekly allowance of $20 to spend. For each of the four sets of preferences described below, calculate the compensating variation if the price of apples rises to $5. (a) (4) Abigail: U(a, b) = a + 2b (b) (4) Bernard: U(a, b) = 2a + b (c) (4) Cornwallis: U(a, b) = b-a (d) (4) Douglas: U(a, b) = min(a, 3b) Question 5 (28 points) Demand for Rover dogwalking services in Harrisonburg is given by the following inverse demand function: Pa(q) = 30- 10⁹
In each case, the compensating variation represents the change in income required to offset the decrease in utility resulting from the increase in the price of apples. The specific calculation will depend on the individual's utility function and the relative prices of apples and bananas.
To calculate the compensating variation, we need to determine the change in income required to restore each person's utility level to what it was before the price of apples increased.
(a) Abigail: U(a, b) = a + 2b
If the price of apples rises to $5, Abigail's utility function becomes U(a, b) = 5a + 2b. To calculate the compensating variation, we need to find the income level that would make Abigail just as well off as before. By comparing the utility levels before and after the price change, we can determine the change in income required.
(b) Bernard: U(a, b) = 2a + b
Similar to Abigail, we need to modify Bernard's utility function to U(a, b) = 2a + 5b and find the compensating variation.
(c) Cornwallis: U(a, b) = b - a
For Cornwallis, the utility function remains the same, U(a, b) = b - a. We need to assess the change in income necessary to maintain the initial utility level.
(d) Douglas: U(a, b) = min(a, 3b)
Douglas' utility function is U(a, b) = min(a, 3b). By substituting the new price of apples, we can calculate the compensating variation.
To know more about compensating variation, refer to the link below:
https://brainly.com/question/32769369#
#SPJ11
7. Unequal project lives Luthering Corp. has to choose between two mutually exclusive projects. If it chooses project A, Luthering Corp. will have the opportunity to make a similar investment in three years. However, if it chooses project B, it will not have the opportunity to make a second investment. The following table lists the cash flows for these projects. If the firm uses the replacement chain (common life) approach, what will be the difference between the net present Value (NPV) of project A and project B, assuming that both projects have a weighted average cost of capital of 10%? Cash Flow Project A Year 0: Year 1: Year 2: Year 3: -$10,000 7,000 15,000 14000 Year O: Year 1: Year 2: Year 3: Year 4: Year 5: Year 6: $45,000 9,000 16,000 15,000 14,000 13,000 12,000 $17,344 $21,680 $19,512 $13,008 $18,428 Luthering Corp. is considering a three-year project that has a weighted average cost of capital of 10% and a NPV of $85,647. Luthering Corp. can replicate this project indefinitely. What is the equivalent annual annuity (EAA) for this project? $16,426 Luthering Corp. is considering a three-year project that has a weighted average cost of capital of 10% and a NPV of $85,647. Luthering Corp. can replicate this project indefinitely. What is the equivalent annual annuity (EAA) for this project? $37,884 $39,606 $29,274 $34,440 $41,328
Previous question
To determine the difference in net present value (NPV) between project A and project B using the replacement chain approach, we need to calculate the present value of each project's cash flows and compare them.
Project A has cash flows of -$10,000 at Year 0, $7,000 at Year 1, $15,000 at Year 2, and $14,000 at Year 3. Project B has cash flows of $45,000 at Year 0, $9,000 at Year 1, $16,000 at Year 2, $15,000 at Year 3, $14,000 at Year 4, $13,000 at Year 5, and $12,000 at Year 6.
Using the weighted average cost of capital (WACC) of 10%, we can discount each cash flow to its present value. The present value of each cash flow is calculated by dividing the cash flow by (1 + WACC)^t, where t represents the time period.
Once we have the present value of each cash flow for both projects, we can sum them up to calculate the NPV of each project. The NPV is the sum of all the present values of the cash flows.
For project A, the NPV is calculated as:
NPV(A) = -$10,000/(1+0.10)^0 + $7,000/(1+0.10)^1 + $15,000/(1+0.10)^2 + $14,000/(1+0.10)^3
For project B, the NPV is calculated as:
NPV(B) = $45,000/(1+0.10)^0 + $9,000/(1+0.10)^1 + $16,000/(1+0.10)^2 + $15,000/(1+0.10)^3 + $14,000/(1+0.10)^4 + $13,000/(1+0.10)^5 + $12,000/(1+0.10)^6
After calculating the NPV for both projects, we can find the difference between NPV(A) and NPV(B):
Difference = NPV(A) - NPV(B)
By substituting the values of the cash flows and the WACC into the respective formulas and performing the calculations, we can determine the specific difference in NPV between project A and project B.
Unfortunately, the specific values for NPV(A) and NPV(B) were not provided in the question, so we cannot calculate the exact difference.
To know more about Replacement visit-
brainly.com/question/29765379
#SPJ11
Nu Company reported the following data for its first year of operations: Net Sales $2,800 Cost of Goods Sold $1,680 Operating Expenses $880 Ending Inventory $820 What is the gross profit ratio?
The gross profit ratio for Nu Company is 40%.
The gross profit ratio for Nu Company is 40%.The gross profit ratio is a profitability ratio that measures the proportion of gross profit generated from net sales. Gross profit ratio is calculated by dividing the gross profit amount by the net sales amount. It is usually expressed as a percentage and it reflects how efficiently a company is using its raw materials and labor in the production process .Gross Profit Ratio = Gross Profit / Net Sales x 100Given,Net Sales = $2,800Cost of Goods Sold = $1,680Ending Inventory = $820Gross Profit = Net Sales – Cost of Goods Sold Gross Profit = $2,800 - $1,680 = $1,120Gross Profit Ratio = 1,120 / 2,800 x 100 = 40%
Know more about profit ratio here:
https://brainly.com/question/30902683
#SPJ11
The outstanding share capital of Sheng Inc Includes 47,000 shares of $9.60 cumulative preferred and 82,000 common shares, all issued during the first year of operations. During its first four years of operations, the corporation declared and paid the following amounts in dividends: Year Total Dividends Declared
2018 $ 0
2019 480,000
2020 1,008,000
2021 480,000
Required: Determine the total dividends paid in each year to each class of shareholders. Also determine the total dividends paid to each class over the four years.
Year 2018: Total dividends paid to preferred shareholders = $0, Total dividends paid to common shareholders = $0.
Year 2019: Total dividends paid to preferred shareholders = $0, Total dividends paid to common shareholders = $480,000.
Year 2020: Total dividends paid to preferred shareholders = $460,800, Total dividends paid to common shareholders = $547,200.
Year 2021: Total dividends paid to preferred shareholders = $92,160, Total dividends paid to common shareholders = $387,840.
Total dividends paid to preferred shareholders over four years = $553,960.
Total dividends paid to common shareholders over four years = $1,415,040.
In 2018, no dividends were declared or paid, so the total dividends paid to both preferred and common shareholders are $0.
In 2019, the total dividends declared and paid were $480,000, and these were paid only to the common shareholders. No dividends were paid to the preferred shareholders.
In 2020, the total dividends declared and paid were $1,008,000. For the preferred shareholders, the dividends are cumulative, so the unpaid dividends from 2019 ($480,000) are paid in addition to the current year's dividends. Therefore, the total dividends paid to preferred shareholders in 2020 are $480,000 + $460,800 = $940,800. The remaining amount of $1,008,000 - $940,800 = $67,200 is paid to the common shareholders.
In 2021, the total dividends declared and paid were $480,000. For the preferred shareholders, the unpaid dividends from 2020 ($67,200) are paid in addition to the current year's dividends. Therefore, the total dividends paid to preferred shareholders in 2021 are $67,200 + $92,160 = $159,360. The remaining amount of $480,000 - $159,360 = $320,640 is paid to the common shareholders.
Over the four-year period, the total dividends paid to the preferred shareholders are $940,800 + $159,360 = $1,100,160. The total dividends paid to the common shareholders are $480,000 + $67,200 + $320,640 = $867,840.
To learn more about share capital, here
https://brainly.com/question/32538254
#SPJ4
Which tab in the Books review menu allows you to view and adjust balances for balance sheet accounts?
Final review
Account reconciliation
Setup
Transaction review
The tab in the Books review menu that allows you to view and adjust balances for balance sheet accounts is the "Account reconciliation" tab. Option B.
The account reconciliation process is an essential part of financial management and ensures the accuracy and integrity of financial statements.
It involves comparing the balances recorded in the company's accounting records with external sources, such as bank statements or vendor statements, to identify and resolve any discrepancies.
The Account reconciliation tab provides a centralized location within the accounting software where you can access and review the balances of balance sheet accounts. This tab allows you to view the current balances of various balance sheet accounts, such as cash, accounts receivable, accounts payable, inventory, and fixed assets.
In addition to viewing the balances, the Account reconciliation tab also provides functionality to adjust the balances if necessary. This feature allows you to correct any errors or discrepancies found during the reconciliation process, ensuring that the financial statements reflect the correct balances for the balance sheet accounts.
By using the Account reconciliation tab, businesses can maintain accurate and up-to-date financial records. It provides a systematic approach to monitor and control the balances of balance sheet accounts, identify potential errors or fraud, and ensure the financial health of the company.
Overall, the Account reconciliation tab is a critical tool within the Books review menu that enables businesses to view, analyze, and adjust balances for balance sheet accounts, contributing to the accuracy and reliability of financial reporting. SO Option B is correct.
For more question on balance visit::
https://brainly.com/question/29473582
#SPJ8
YOUR TURN: Based on this paragraph enter these assumptions and apply the appropriate number formats. Wally's Widgets expects to collect 25% of sales in the month the sale occurs, 50% the following month, and 25% the second month after the sale has occurred. Wally's Widgets will pay for 60% of inventory purchases in the month the purchase occurs, and 40% the following month.
Collection of Sales:
25% of sales are collected in the month the sale occurs.
50% of sales are collected in the following month.
25% of sales are collected in the second month after the sale has occurred.
Payment for Inventory Purchases:
60% of inventory purchases are paid in the month the purchase occurs.
40% of inventory purchases are paid in the following month.
Number Formats:
For the collection of sales and payment for inventory purchases, the appropriate number format would be percentages (%). This format will represent the proportions of sales collected and payments made as percentages of the total amount.
If you need to apply these assumptions to specific sales or inventory purchase amounts, you can express those values in the desired currency format (e.g., USD) or any other appropriate format for your context.
To know more about inventory purchases, here
brainly.com/question/29843293
#SPJ4
Provide 3 Examples of Stock Certificates and 3 examples of Bond
Certificates.
Examples of Stock Certificates:
Apple Inc. Stock CertificateFord Motor Company Stock CertificateCoca-Cola Company Stock CertificateExamples of Bond Certificates:United States Treasury Bond Certificate: This is a bond certificate issued by the U.S. Department of the Treasury, representing a loan to the U.S. government. It would include information such as the bond's face value, maturity date, coupon rate, and the government's official seals.
General Electric Corporate Bond Certificate: This is a bond certificate issued by General Electric, a multinational conglomerate. It would contain details about the bondholder, the bond's face value, maturity date, coupon rate, and the company's branding.
Municipal Bond Certificate: This is a bond certificate issued by a municipal government or a local authority to raise funds for public projects. It would feature information about the bondholder, the bond's face value, maturity date, interest rate, and the municipality's official seals or emblems.
Learn more about Stock Certificates at
https://brainly.com/question/14657553
#SPJ4
Financial statements:
Income statement for the year ending 12/31/2021
Sales/revenues
1,750
Variable cost a.k.a. cost of goods sold (COGS)
(700)
Fixed cost a.k.a. selling general and administrative (SG&A)
(400)
Depreciation
(100)
EBIT
550
Interest expense
(100)
EBT
450
Taxes (40%)
(180)
Net Income
270
The NI belongs to the stockholders, assume that half is paid out in dividends and the rest is added to retained earnings.
- Dividends 135 (50% of net income in this case)
- Additions to retained earnings 135 (net income minus dividends)
Balance sheet on 12/31/2021:
Cash
100
A/P
200
A/R
150
Accruals
125
Inventory
250
Notes payable
100
Fixed assets
1,500
Long term debt
725
Common stock
50
Retained earning
800
Total assets
2,000
Total claims
2,000
Calculate the price to earnings ratio(P/E ratio) and ROE
ROE is a metric that gauges a corporation's efficacy in utilizing its investors' equity to generate earnings.
The Financial StatementsP/E ratio
Net income = $270
Number of shares outstanding = 100
P/E ratio = $270 / 100 = 27
ROE
Net income = $270
Total equity = $800
ROE = $270 / $800 = 33.75%
The calculation involves dividing the net income by the overall equity amount. An excellent return on equity signifies that the company is utilizing its equity effectively, whereas a poor return on equity signifies that the company is ineffective in using its equity.
Read more about return on equity here:
https://brainly.com/question/11468206
#SPJ4
Sproul's common stock has an expected return of 10.08%. The
return on the S&P 500 is 11.6% and the U.S. T-Bill rate is
3.42%. What is Sproul's beta?
Beta coefficient is a method of measuring how sensitive a stock's price is to market volatility. Beta is a measure of stock risk that indicates how far the stock will fluctuate relative to the overall market. It is a measure of a stock's relative volatility.
A beta of 1 indicates that the stock's price will move with the market, while a beta of less than 1 indicates that the stock's price is less volatile than the market. A beta of greater than 1 indicates that the stock's price is more volatile than the market.Beta coefficient is a method of measuring how sensitive a stock's price is to market volatility.
Beta is a measure of stock risk that indicates how far the stock will fluctuate relative to the overall market. It is a measure of a stock's relative volatility. A beta of 1 indicates that the stock's price will move with the market, while a beta of less than 1 indicates that the stock's price is less volatile than the market.
A beta of greater than 1 indicates that the stock's price is more volatile than the market. The formula to calculate Beta is:Beta = (Return on Stock - Risk-free Rate) / (Return on Market - Risk-free Rate)Given, Sproul's expected return = 10.08%,Return on S&P 500 = 11.6%,Risk-free Rate (T-Bill rate) = 3.42%
Now, calculate the beta as follows:Beta = (10.08 - 3.42) / (11.6 - 3.42)Beta = 6.66 / 8.18Beta = 0.813So, the Beta of Sproul's common stock is 0.813.
For more questions on: stock
https://brainly.com/question/28003025
#SPJ11
The spot price of an investment asset that provides no income is $30 and the risk-free rate for all maturities (with continuous compounding) is 10%. Show all work.
a. What, to the nearest cent, is the three-year forward price?
b. Assume that the asset provides an income of $2 at the end of the first year and at the end of the second year. What is the three-year forward price?
a. The three-year forward price, without any income from the asset, is approximately $40.46.
b. Considering an income of $2 at the end of the first and second year, the three-year forward price is approximately $43.50.
a. To calculate the three-year forward price without any income, we can use the formula:
Forward Price = Spot Price * e^(risk-free rate * time)
where e represents the mathematical constant Euler's number.
Using the given values:
Spot Price = $30
Risk-free rate = 10% = 0.10
Time = 3 years
Forward Price = $30 * e^(0.10 * 3)
Forward Price ≈ $40.46
b. If the asset provides an income of $2 at the end of the first and second year, we need to adjust the calculation. The forward price formula becomes:
Forward Price = (Spot Price - Present Value of Income) * e^(risk-free rate * time)
Calculating the present value of $2 at the end of each year:
PV of $2 at the end of Year 1 = $2 / (1 + 0.10)^1 ≈ $1.82
PV of $2 at the end of Year 2 = $2 / (1 + 0.10)^2 ≈ $1.65
Substituting the adjusted values into the forward price formula:
Forward Price = ($30 - $1.82 - $1.65) * e^(0.10 * 3)
Forward Price ≈ $43.50
a. The three-year forward price without any income from the asset is approximately $40.46.
b. Considering an income of $2 at the end of the first and second year, the three-year forward price is approximately $43.50.
To know more about Forward Price, visit
https://brainly.com/question/30500386
#SPJ11\
When and how is the general ledger updated for transactions processed by the transaction cycle accounting sunystems in a software- based accounting information system jeg journal entries produced by the Expenditure cycle subsystem?
O None of the these
O The software can usually be configured to update the general ledger periodically through summary journal entries or in real-time through journal entries for each transaction as it is processed
O Only in real-time through journal entries recorded as transactions are processed
O Transaction cycle accounting subsystems do not produce journal entries or update the general ledger.
O Only periodically through summary journal entries that represent the results of transactions for the chosen period
The correct answer is: The software can usually be configured to update the general ledger periodically through summary journal entries or in real-time through journal entries for each transaction as it is processed.
In a software-based accounting information system, the general ledger can be updated either periodically or in real-time, depending on the configuration. The software can be programmed to generate summary journal entries at specific intervals, such as daily, weekly, or monthly, to update the general ledger with the cumulative results of transactions processed during that period
Alternately, the program can be configured to update the general ledger in real-time, in which case journal entries are made for each transaction as the transaction cycle accounting subsystems process it. By doing this, it is made sure that the general ledger is constantly updated with the most recent data.
To know more about General Ledger, refer
https://brainly.com/question/30164092
#SPJ4
According to its original plan, Gibson Consulting Services Company plans to charge its customers for service at $127 per hour in Year 2. The company president expects consulting services provided to c
To develop flexible budgets based on different service levels, we need to calculate the total costs for each level of service and then add the fixed costs to obtain the total budget.
How to solve for the flexible budgetGiven information:
Service rate: $127 per hour
Expected service hours: 49,000 hours
Variable cost per hour: $44
Fixed cost: $1,490,000
Service revenue 46,000 x 127 = $5,842,000 49,000 x 127 = $6,223,000 52,000 x 127 = $6,604,000
Variable costs 46,000 x 44 = $2,024,000 49,000 x 44 = $2,156,000 52,000 x 44 = $2,288,000
Contribution margin 3,818,000 4,067,000 4,316,000
Fixed costs 1,490,000 1,490,000 1,490,000
Net income $2,328,000 $2,577,000 $2,826,000
Read more on budget here:
https://brainly.com/question/6663636
#SPJ4
Complete question
According to its original plan, Gibson Consulting Services Company plans to charge its customers for service at $127 per hour in 2018 The company president expects consulting services provided to customers to reach 49,000 hours at that rate. The marketing manager, however, argues that actual results may range from 46,000 hours to 52,000 hours because of market uncertainty. Gibson's standard variable cost is $44 per hour, and its standard fixed cost is $1,490,000. Required Develop flexible budgets based on the assumptions of service levels at 46,000 hours, 49,000 hours, and 52,000 hours. Flexible Budget Flexible Budget Flexible Budget 46,000 Hours 49,000 Hours 52.000 Hours
(a) Give an example of a Condorect voting cycle when there are
four alternatives A, B, C, D. Briefly explain. [8 marks]
A Condorcet voting cycle occurs when there are at least three alternatives in the election process, and each alternative wins and loses in a cycle in the pairwise vote.
The four alternatives A, B, C, and D can generate a Condorcet voting cycle as follows: Let's say A wins against B, B wins against C, C wins against D, and D wins against A. A Condorcet cycle can occur when there is no agreement on the order of preference of voters among at least three options.
When two candidates obtain an equal number of votes in a cycle, it means that the majority of voters prefer the remaining candidates to each other. In a Condorcet cycle, there is no clear majority winner, and any outcome between the options can result in a cycle.
To know more about election refer to:
https://brainly.com/question/31273232
#SPJ11
Manual controls would most likely be more suitable than automated controls for which of the following?
A. Situations with routine errors that can be predicted and corrected.
B. Large, unusual, or nonrecurring transactions.
C. High-volume transactions that require additional calculations.
D. Circumstances that require a high degree of accuracy.
Manual controls would most likely be more suitable than automated controls for circumstances that require a high degree of accuracy. The correct answer is option (D).
The reasons for this are as follows:1. The automation of high-precision operations may be challenging or prohibitively expensive.2. Manual controls have a better chance of identifying potential errors than automated controls, especially in instances where the procedure's inputs or processes are unknown.3. Automated controls that are programmed incorrectly may produce incorrect results, whereas manual controls are less likely to do so.Manual controls are the best option for situations requiring a high degree of precision because humans are better able to identify and correct errors than machines. Hence, the right answer is option (D).
Humans have a better chance of detecting inconsistencies, and by using manual controls, errors may be corrected rapidly and accurately. For instance, processes like reconciling cash registers, closing books, reviewing cash movements, and doing physical stock counts are manual tasks that need a high degree of accuracy because they form a critical part of the company's internal control system.
To know more about controls click here
brainly.com/question/32097186
#SPJ11