n the diagram, the arrow shows the movement of electric charges through a wire connected to a battery.

A battery with an arrow at its top running from left to right. A black line connects the right end of the battery to the left end by making a series of straight lines to form a rectangular box with the battery as part of the bottom side.
What causes the electric charges to flow from one end of the battery to the other?

a balance in electric potential
a balance in resistance
a difference in electric potential
a difference in resistance

Answer:

12m

Explanation:

Given parameters:

Distance walked westward  = 2.8m

Time of travel  = 5min

Distance walked eastward = 9.2m

Time of travel  = 10min

Unknown:

The total shopper's travel distance  = ?

Solution:

Total distance traveled is the sum of the length of path covered by a body. It is a scalar quantity.

 Total distance = distance walked westward + distance walked eastward

  Total distance  = 2.8m + 9.2m  = 12m

Answer:

Subduction is a geological process that takes place at convergent boundaries of tectonic plates where one plate moves under another and is forced to sink due to high gravitational potential energy into the mantle. Regions where this process occurs are known as subduction zones.

Answer: Second law of thermodynamics is very important because it talks about entropy and  'entropy dictates whether or not a process or a reaction is going to be spontaneous'.

Explanation:

Answer:

C.Forced air

Explanation:

HVAC system

"By far the most common HVAC system in modern North American homes is the forced-air system that uses a furnace with a blower fan that delivers warmed air to the various rooms of the home through a network of ducts."

So can you please mark me brainliest?

Answer:

5m

Explanation:

Given parameters:

Work done in lifting the box  = 50J

Force applied  = 10N

Unknown:

Height of lifting the box  = ?

Solution:

Work done is the produce of force and distance;

      Work done  = Force x distance

Now to find the height;

  Work done  = Force  x height;

   50  = 10 x h

         h  = 5m

Answer:

ok will do that

Explanation:

The answer is number 2 stomata.

Answer:

Av = 12.9 [km/h]

Explanation:

We must remember that the average speed is defined as the relationship between the space traveled over a certain time.

[tex]Av = x/t[/tex]

where:

Av = average speed [km/h]

x = distance [km]

t = time [hr]

For when he was on the bus

The distance can be calculated by clearing the equation, for the term of the distance

[tex]x_{1}= A_{v}*t\\x_{1}= 15*1.6\\x_{1}=24[km][/tex]

For when Andy was walking

[tex]x_{2}=A_{v}*t\\x_{2}=4.5*0.4\\x_{2}=1.8 [km][/tex]

Now the total time is the sum of 1.6 + 0.4 = 2 [hr], and the total distance is the sum of the distances calculated above.

[tex]x = 24 + 1.8\\x = 25.8 [km][/tex]

The average speed is calculated using the ratio of space to time.

[tex]Av = 25.8/2\\Av = 12.9 [km/h][/tex]

Explanation:

well the father of nation is Mahtma Gandhi.

Answer:

the gradual movement of the continents across the earth's surface through geological time.

Answer:

Continental drift is the hypothesis that the Earth's continents have moved over geologic time relatives to each other.

Answer:

Scientific laws are facts that describe observed reoccurring natural events.

Explanation:

Scientific laws are explanations for the behavior of the natural world. Scientific theories are explanations for scientific laws.

Answer:

Using the range formula   S = V^2 * sin 2 theta / g

So the cannonball should travel

S = 35^2 * sin 90 / 9.8 = 125 m

Then the cannon should be placed 100 m from the wall

H = Vy t - 1/2 g t^2   height of cannonball after time t

Vy = 35 * sin 45 = 24.7 m/s     vertical speed of cannonball

Vx = 35 * cos 45 = 24.7 m/s

t = 100 m / 24,7 m/s = 4.04 sec    time for cannonball to reach wall

H = Vy t - 1/2 g t^2       height of cannonball after time t

H = 24.7 * 4.04 - 1/2 * 9.8 * 4.04^2 = 19.8 m

19.8 m - 15 m = 4.8 m     cannonball clears wall by 4.8 m

The projectile launch ratios allow to find the results on the cannonball launch questions are:

 a) The canyon is at x = 100 m from the wall.

 b) The bullet hits the wall at a height of 4.8 m above the height of the wall.

Projectile launching is an application of kinematics where there is no acceleration on the x-axis and the y-axis is gravity acceleration.

A) Indicate that the initial speed of the bullet is v = 35 m/s with an angle  θ=45º, which is the distance from the wall. The target is 25 m behind the wall, in the attachment we have a scheme of the system.

Let's find the range that is the horizontal distance for which the height is  zero.

       [tex]R = \frac{v_p^2 \ sin \ 2\theta}{g}[/tex]

Let's calculate.

       R = [tex]\frac{35^2 \ sin ( 2 45(}{9.8}[/tex]  

       R = 125 m

Therefore the canonl must be 100 m from the wall.

B) The height of the wall is y = 15m, the blah manages to pass it and by how much.

We use trigonometry to find the components of velocity.

         v₀ₓ = v₀ cos θ

         [tex]v_{oy}[/tex] = v₀ sin θ

          v₀ₓ = 34 cos 45 = 24.7 m / s

          [tex]v_{oy}[/tex] = vo sin 45 = 24.7 m / s

Let's find the time it takes for the cannonball to travel the x = 100 m

        [tex]v_x = \frac{x}{t} \\ t = \frac{x}{v_x}[/tex]

        t = [tex]\frac{100}{35 \ cos 45 }[/tex]  

        t = 4.04 s

Let's find the height for this time.

        y = [tex]v_[oy}[/tex] t - ½ g t²

Let's calculate

        y = 24.7 4.04 - ½ 9.8 4.04²

        y = 19.8 m

This height is greater than the height of the wall h = 15m, therefore the cannoball passes the wall, by a difference in height.

        Δy = y -h

        Δy = 19.8-15

        Δy = 4.8 m

In conclusion, using the projectile launch ratios we can find the results on the cannonball launch questions are:

 a) The canyon is at x = 100 m from the wall.

 b) The cannonball hits the wall at a height of 4.8m above the height of the wall.

Learn more here:  brainly.com/question/10903823

Answer:

150 m

Explanation:

Given,

u=5m/s

a=2m/s2

t=10s

v=?

s=?

Now,

v=u+at

=5+2×10

=5+20

=25m/s

So,

s=u+v/2×t

=5+25/2×10

=30/2×10

=15×10

=150m

Answer:

10kg ball

Explanation:

a laptop is a lot less in weight so you have to use less force to lift it

Answer:

10 kg bowling ball

Explanation:

A h e m.

It would be easy to lift 1kg laptop 20 meters without breaking a sweat and would be less than your body weight. But a 10kg bowling ball is that x10 so its  heavier

Answer:

r = 0.5 m

Explanation:

First we find the angular speed of the ball by using its period:

ω = θ/t

For the time period:

ω = angular speed = ?

θ = angular displacement = 2π rad

t = time period = 0.5 s

Therefore,

ω = 2π rad/0.5 s

ω = 12.56 rad/s

Now, for the radius:

v = rω

r = v/ω

where,

v = linear speed = 6.29 m/s

r = radius = ?

r = (6.29 m/s)/(12.56 rad/s)

r = 0.5 m

Answer:

Imp_{1-2}=5000[kg*m/s]

Explanation:

In order to solve this problem, we must use the principle of conservation of momentum, which is defined as the product of mass by Velocity.

It must be defined that the impulse after the force is applied is equal to the momentum before the impulse applied on the body.

ΣPbefore = ΣPafter

P = momentum = m*v [kg*m/s]

In this way, we will construct the following equation.

[tex](m_{1}*v_{1})+ Imp_{1-2}=(m_{1}*v_{2})[/tex]

where:

m₁ = mass of the object = 200 [kg]

v₁ = velocity of the object before the impulse = 15 [m/s]

v₂ = velocity of the object after the impulse = 40 [m/s]

Now replacing:

[tex](200*15) + Imp_{1-2} = (200*40)\\Imp_{1-2}=5000[kg*m/s][/tex]

Hello!

Topic: Dinamic

Value to calculate: Force

First, we have to calculate the aceleration, for that, lets aplicate the formula:

[tex]\boxed{a=\frac{V-Vi}{t} }[/tex]

How the final velocity is in km/h, we have to convert it on m/s, so:

m/s = km/h / 3,6

m/s = 105 / 3,6

m/s = 29,16

Then, lets replace formula according problem information:

[tex]a = \dfrac{29,16m/s-0m/s}{0,934s}[/tex]

[tex]a =31,22\ m/s^{2}[/tex]

Now, how we have the aceleration, lets applicate second law of newton for calculate the force produced:

[tex]\boxed{F=ma}[/tex]

Replace and resolve it:

F = 856 kg * 31,22 m/s^2

F = 26724,32 kg * m/s^2

Then the force is of 26724,32 kg * m/s^2

But how we know an 1 kg * m/s^2 = 1 N

Then the average of the force is of 26724,32 N  

(1) The change in momentum of race car is 89880 kg-km/h.

(2) The average force exerted on the car is of 96231.26 N.

Given data:

The mass of race car is, m = 856 kg.

The initial speed of car is, u = 0 km/h.

The final speed of car is, v = 105 km/h.

The time interval is, t = 0.934 s.

1)

The change in the impact due to average force is known as momentum change. The expression for the change in momentum is given as follows,

[tex]\Delta P = m(v-u)[/tex]

Solving as,

[tex]\Delta P = 856 \times (105-0)\\\\\Delta P = 89880 \;\rm kg.km/h[/tex]

Thus, we can conclude that the change in momentum of race car is 89880 kg-km/h.

2)

Now, use the concept of impulse-momentum which says that the impulse is equal to change in momentum. Which means,

[tex]I = \Delta P[/tex]

And impulse is,

[tex]F \times t = \Delta P\\\\F = \dfrac{\Delta P}{t}[/tex]

Solving as,

[tex]F = \dfrac{89880}{0.934}\\\\F = 96231.26 \;\rm N[/tex]

Thus, we can conclude that the average force exerted on the car is of 96231.26 N.

Learn more about the impulse-momentum theorem here:

https://brainly.com/question/14121529

Answer:

50 kg*m/s southward

Explanation:

p=mv

 =25kg(2m/s)

 =50 kg*m/s

Answer:

A: wear several thin layers and a waterproof top layer

Explanation:

The most common cause of hypothermia is getting wet. Wet clothes combined with wind can pull heat away from the body very quickly. Wool is a good insulator even when it is wet, but wet cotton will bolster heat loss. When dressing for cold weather, put on several thin layers, rather than one or two heavy ones, and top with windproof and waterproof outer layers.

The best way to dress for an outdoor trip in cold weather is to wear several thin layers and a waterproof top layer, the correct option is A.

Insulation is a type of material used to create barriers to the transmission of the form of energy which either is in form of heat or electricity.

For outdoor trips in cold weather, several thin layers act as better insulating barriers for heat transfer.

Learn more about insulation

https://brainly.com/question/14363642

#SPJ2

Answer:

The gravitational force between the two masses is 1.668575 × 10⁻¹¹ N

Explanation:

The given parameters are;

The mass of the two asteroids having gravitational attraction, are m₁ = m₂ = m = 50,000 kg

The separation distance between their centers, r = 1,000 m

The gravitational attraction force, F, between the two masses is given as follows;

[tex]F =G\dfrac{m_{1}m_{2}}{r^{2}}[/tex]

Where;

G = The universal gravitational constant = 6.67430 × 10⁻¹¹ N·m²/kg²

m₁ = m₂ = m

Substituting the values gives;

[tex]F =6.67430 \times 10^{-11} \times \dfrac{50,000 \times 50,000}{1000^{2}} = 1.668575 \times 10^{-7} \ N[/tex]

The gravitational force, F, between the two masses = 1.668575 × 10⁻¹¹ N.

The gravitational force between the two identical asteroids is 1.67 × 10⁻⁷ Newton.

Given the data in the question

Since the asteroids are identical

Gravitational force; [tex]F =\ ?[/tex]

To determine the gravitational force between two identical asteroids, we use the Newton's law of universal gravitation:

[tex]F = G\frac{m_1m_2}{r^2}[/tex]

Where [tex]m_1[/tex] is mass of object 1, [tex]m_2[/tex] is mass of object 2, r is the distance between centers of the masses and G is the Gravitational constant ( [tex]6.67408 * 10^{-11} m^3/kgs^2[/tex] )

We substitute our values into the equation

[tex]F = (6.67408 * 10^{-11} m^3/kgs^2) \frac{50000kg*50000kg}{(1000m)^2} \\\\F = \frac{0.166852kgm^3/s^2}{1000000m^2}\\\\ F = 1.67 * 10^{-7}kg.m/s^2\\\\F = 1.67 * 10^{-7}N[/tex]

Therefore, the gravitational force between the two identical asteroids is 1.67 × 10⁻⁷ Newton.

Learn more: https://brainly.com/question/19228907

Answer:

Heat would flow from a hot cup of coffee to a room temperature table.

Explanation:

Thermal energy will flow from a hot cup of coffee to a room temperature table.

Heat is a form of thermal energy which is the  average kinetic energy of the particles of system.

Answer:

the answer is B

Explanation:

we assume that all of these springs have tha same k , the spring constant

elastic energy for the initial system = Ep1=  [tex]\frac{kd^{2} }{2}[/tex]

for the new changed system , the spring constant = k1+k2 = k+k = 2k  , but the displacement is also reduced to 0.5 d

so Ep2 = [tex]\frac{2k(0.5d)^{2} }{2} = \frac{kd^2}{4}[/tex]

so the new total Ep stored in the new system is 1/2Ep

hope it helps

Answer:

this is true

Explanation:

just did the it on edg 2020

Answer:

True

Explanation:

Answer:

A. the tendency of moving objects to stay in motion

Explanation:

just did it on ap3x

Answer:

3N

Explanation:

Given parameters:

Mass of toy car  = 6kg

Initial velocity = 0m/s

Final velocity  = 2m/s

Time  = 4s

Unknown:

Net force  = ?

Solution:

The net force is given by;

      Force  = mass x acceleration;

     Force  = mass  x [tex]\frac{v - u}{t}[/tex]  

 v is the final velocity

 u is the initial velocity

 t is the time taken

Now insert the parameters and solve;

  Force  = 6 x [tex]\frac{2 - 0}{4}[/tex]   = 3N

Answer:

Movement of air caused by temperature or pressure differences is wind.

Explanation:

This is due to the rotation of the Earth beneath the moving air, which causes an apparent deflection of the wind to the right in the northern hemisphere, and left in the southern hemisphere.

Answer:

Air moves because of wind

Explanation:

Air moves due to a difference of air pressure which can be caused by different temperatures. Air pressure is the push caused by the particles in the air. Hope this helps

Answer:

look in internet u can find online converter and there u will get a rel answer

Explanation: