no links pls it’s very unhelpful

No Links Pls Its Very Unhelpful

Answers

Answer 1

answer : i don’t knowww :)

Right spelling:

Answer: I don’t know. :)


Related Questions

How are the electron structures of carbon (C) and oxygen (O) similar? PLEASE HELP

Answers

Answer:

Carbon and oxygen are similar in a few ways. They are both elements, which are the fundamental building blocks of all matter. This means that they both have protons and electrons. They also both have neutrons

A chemist uses hot hydrogen gas to convert chromium(III) oxide to

pure chromium. How many grams of hydrogen are needed to

convert 76 grams of chromium(III) oxide, Cr203?

Answers

Answer: 3.024 g grams of hydrogen are needed to  convert 76 grams of chromium(III) oxide, [tex]Cr_{2}O_{3}[/tex]

Explanation:

The reaction equation for given reaction is as follows.

[tex]Cr_{2}O_{3} + 3H_{2} \rightarrow 2Cr + 3H_{2}O[/tex]

Here, 1 mole of [tex]Cr_{2}O_{3}[/tex] reacts with 3 moles of [tex]H_{2}[/tex].

As mass of chromium (III) oxide is given as 76 g and molar mass of chromium (III) oxide [tex](Cr_{2}O_{3})[/tex] is 152 g/mol.

Number of moles is the mass of substance divided by its molar mass. So, moles of [tex]Cr_{2}O_{3}[/tex] is calculated as follows.

[tex]No. of moles = \frac{mass}{molar mass}\\= \frac{76 g}{152 g/mol}\\= 0.5 mol[/tex]

Now, moles of [tex]H_{2}[/tex].given by 0.5 mol of [tex]Cr_{2}O_{3}[/tex] is calculated as follows.

[tex]0.5 mol Cr_{2}O_{3} \times \frac{3 mol H_{2}}{1 mol Cr_{2}O_{3}}\\= 1.5 mol H_{2}[/tex]

As molar mass of [tex]H_{2}[/tex] is 2.016 g/mol. Therefore, mass of [tex]H_{2}[/tex] is calculated as follows.

[tex]No. of moles = \frac{mass}{molar mass}\\1.5 mol = \frac{mass}{2.016 g/mol}\\mass = 3.024 g[/tex]

Thus, we can conclude that 3.024 g grams of hydrogen are needed to  convert 76 grams of chromium(III) oxide, [tex]Cr_{2}O_{3}[/tex].

M
Mass can be measured in local units like dharni pau eto. Discuss the advantages of using
standard units of mass over the local units of mass. (Any two points)
N2 Points)
soup answer​

Answers

Answer:

1.They are reliable.

2.They dont vary from person to person

Iodine is prepared both in the laboratory and commercially by adding Cl2(g) to an aqueous solution containing sodium iodide. 2NaI(aq)+Cl2(g)⟶I2(s)+2NaCl(aq) How many grams of sodium iodide, NaI, must be used to produce 87.9 g of iodine, I2?

Answers

Answer:

[tex]m_{NaI}=104gNaI[/tex]

Explanation:

Hello there!

In this case, given the balanced chemical reaction, it is possible to evidence that the mole ratio of sodium iodide to iodine is 2:1 and the molar masses are 149.89 and 253.81 g/mol respectively; in such a way, we write the following stoichiometric setup in order to obtain the required grams of sodium iodide:

[tex]m_{NaI}=87.9gI_2*\frac{1molI_2}{253.81gI_2}*\frac{2molNaI}{1molI_2}*\frac{149.89gNaI}{1molNaI} \\\\m_{NaI}=104gNaI[/tex]

Regards!

2.14g of sodium sulfide react with excess hydrochloric acid to form sodium chloride and dihydrogen sulfide.
BALANCE IT TO AN EQUATION

Answers

Answer:

2.14 Na2S + 1.99 HCl ----> 3.20 NaCl + 0.935 H2S

Explanation:

The Balanced equation is

Na2S + 2HCl = 2NaCl + H2S

As we can see -

78.0452 g/mol of sodium sulfide reacts with 2 mole of HCl.

Mass of one mole of HCl = 36.458 g/mol

So, 78.0452 g/mol of sodium sulfide reacts with 2* 36.458 g/mol of HCL to produce 2* 58.44 g of NaCl and 34.1 g/mol of H2S

Thus,

2.14g of sodium sulfide will react with (2* 36.458/78.0452)* 2.14 of HCl

2.14g of sodium sulfide will react with 1.99 g of HCl

2.14 Na2S + 1.99 HCl ----> (2* 58.44/78.0452) *2.14 NaCl + (34.1/78.0452) * 2.14 H2S

2.14 Na2S + 1.99 HCl ----> 3.20 NaCl + 0.935 H2S

this particle is an electron. it has no mass and has a negative one charge
gamma particle
alpha particle
beta particle

Answers

Answer:

The answer is a gamma particle.

Answer:

beta particle

Explanation:

Which shows an isomer of the molecule below?

Answers

Answer: C

Explanation:

Don’t trust the other person it’s not A

*view photo for answer*

pay attention! the answer choices aren't always in the same order!

Please, can anyone confirm that my answers are correct?
Will give brainiest to first correct answer! (No links pls)
PLZ HELP

Answers

You are right, so good job

A sample of krypton occupies 15.0 L at a pressure of 2.1 atm. Use Boyle's Law to find the pressure of the krypton when the volume is decreased to 4L.

Answers

Answer:

7.5 atm

Explanation:

Given that,

Initial volume, V₁ =  15 L

Pressure, P₁ = 2.1 atm

Final volume, V₂ = 4L

We need to find the final pressure. The mathematical relation between volume and pressure is given by :

[tex]\dfrac{V_1}{V_2}=\dfrac{P_2}{P_1}\\\\P_2=\dfrac{V_1P_1}{V_2}\\\\P_2=\dfrac{15\times 2}{4}\\\\P_2=7.5\ atm[/tex]

So, the final pressure is equal to 7.5 atm.

what is Hydroelectricity?​

Answers

Answer:

Hydroelectricity, or hydroelectric power, is electricity produced from hydropower. In 2015, hydropower generated 16.6% of the world's total electricity and 70% of all renewable electricity, and was expected to increase by about 3.1% each year for the next 25 years.

Explanation:

Answer:

The electricity which is produced from flowing water or from the force exerted by the flowing water is called Hydroelectricity..

hope it is helpful to you

how do some plants grow and survive in the harshest environments like the dessert or under water

Answers

Answer:

Adaptation

Explanation:

Some plants grow and survive in the harshest environments like the desert or underwater by adapting to the environment. For example, some plants in the desert have thick, waxy skin to reduce loss of water and to reflect heat. They also have large, fleshy stems to store water.  Also, specific plants like cacti in the desert have spikes to protect them from animals wishing to use stored water. These adaptations help them to grow and survive in the desert.

In the ocean, plants have adapted to absorb all the water and carbon dioxide they need from the water they live in. Just as cacti have adapted to live in brutally hot deserts, ocean plants have adapted to deal with things like ocean tides and the salinity (or salt levels) of the water around them. Many ocean plants cling tightly to rocks in order to avoid being swept away by ocean tides.

Hope this helps! Can I have brainliest?

write a paragraph to explain how the transformation of water from one state of matter to another is important for the water cycle​

Answers

In order for us to have water to drink, it first needs to go through a process called the water cycle. And in that water cycle there’s a process called evaporation. Evaporation is the process by which water changes from a liquid to a gas. In order for it to rain we need clouds and clouds are made of water.  The water is heated  causing water molecules to convert into gas, that gas then goes through a process called condensation creating clouds. At some point those clouds will be full of water, and all that water will then cause the cloud to release the water molecules causing rain.

Water Cycle:

The water cycle shows the continuous movement of water within the Earth and atmosphere. It is a complex system that includes many different processes.

Liquid water evaporates into water vapor, condenses to form clouds, and precipitates back to earth in the form of rain and snow.

There are four main parts to the water cycle:

Evaporation, Convection, Precipitation and Collection.

Evaporation is when the sun heats up water in rivers or lakes or the ocean and turns it into vapor or steam.

The water vapor or steam leaves the river, lake or ocean and goes into the air.

Learn more:

brainly.com/question/25226746

How many moles of carbon are needed to react with 5.44moles of so2

Answers

Answer:

1.25 moles

Explanation:

hope that helps :)

ps. im learning about that in school rn too

A dry, solid rock conducts electricity better than a long, meta wire.
True
False

Answers

Answer:

false

Explanation:

metal such as copper, silver, etc conducts heat and electricity. an object such as a rock, plastic, paper does NOT conduct heat.

The name for the process that causes fertile land to become dirt-like is??

Deforestation

Urbanization

Construction

Desertification

Answers

Answer:

Desertification?

Explanation:

Desertification is when fertile lands become desert like

8.45 cm - 3.55 cm = ?

Answers

Answer:

4.9cm or 4.90cm

Explanation:

Use column method and align the numbers. Make sure you add the decimal point before you write the answer, otherwise the value would be wrong.

Answer:

4.90

Explanation:

8.45.

-3.55

minus those two and you'll get the sum!

What causes day and night?
Make sure you give a full, detailed answer, not just one sentence.

Answers

Answer:

The earth's rotation, earth is rotating, so one side of earth will be hit by the sun, and the other wont be hit, making it dark, but since earth rotates, it causes it to turn, making one side have daylight, and the other, darkness, which the light you see is from the sun's reflection on the moon

Hope this helps

In general, agitation causes the dissolving rate of most solutes to:
A- remain the same
B- increase
C- vary unpredictably
D-decrease

Answers

Increase. Agitating the particles of solute within the solvent allow the particles to become more evenly distributed and dissolve at an equal, faster rate.

If a 750 mL of a gas at a pressure of 100.7 kPa has a decrease of pressure to 99.8 kPa, what is the new volume? Show work

Answers

Explanation:

P1V1 = P2V2

(100.7 kPa)(0.75 L) = (99.8 kPa)V2

V2 = (100.7 kPa)(0.75 L)/(99.8 kPa)

= 0.757 L

HELPPP ASAP 10 POINTSS

Which feature of a sound wave directly affects the pitch of the sound? (Pitch is whether it is sounds low like a rumble of thunder or high like a bird chirping)
Question 3 options:


frequency


wavelength


amplitude


longitude

Answers

Frequency determines the pitch of the sound wave.

Answer:

wavelength

Explanation:

What is 90 kPa when converted to atm?
A. 0.5 atm
B. 0.88 atm
C. 1 atm
D. 1.5 atm


Can you show the work

Answers

0.88


I did this and I passed it.
Also this is my favorite thing to do in math so just trust me <3


How much of a 100.0 gram sample of Gold-98 remains after 8.1 days if
its half-life= 2.7 days?

50.0 g

12.5 g

6.25 g

25.0 g

Answers

Answer:

If half-life is 2.7 days then 8.1 days is three half-lives. 12.5%, or 12.5g, of AU-198 would remain.

Explanation:

How many electrons are in an ion of calcium (Ca2+)?
A. 2
B. 18
C. 0
D. 22

Answers

B 18 is the answer ......

What is the momentum of a motorcycle and a rider weighing 215 kg traveling at a speed of 62 meters per second?

Answers

Answer:

[tex]p=13330kg*\frac{m}{2}[/tex]

Explanation:

Hello there!

In this case, since the momentum of any body is calculated by multiplying the mass and the velocity:

[tex]p=m*v[/tex]

We simply need to multiply the 215 kg of the motorcycle by the velocity it has, 62 m/s to obtain:

[tex]p=215kg*62m/s\\\\p=13330kg*\frac{m}{2}[/tex]

Regards!

what is the chemical formula for aluminium?

Answers

Answer

Aluminum is a silvery-white metal which is extremely soft by nature. Totally earth's crust contains 8% of Aluminum. Aluminium is a low-density nonmagnetic and ductile metal which can be made into sheets or wires as required

Explanation:

Answer:

Al

Explanation:

Aluminum is a silvery-white metal which is extremely soft by nature. Totally earth's crust contains 8% of Aluminum.

Helium only has two valence electrons and is a stable atom. How is this possible when atoms
need 8 valence electron to become stable?

Answers

Answer:

Explanation:

Helium (He) is similar in that it, too, only has room for two electrons in its only valence shell. Hydrogen and helium have only one electron shell. The first shell has only one s orbital and no p orbital, so it holds only two electrons. Therefore, these elements are most stable when they have two electrons.

Scientist introducing a gene to the DNA of these fish that cause the fish to glow an example of which application of biotechnology?
A. Artificial selection
B. Genetic Engineering
C. cloning
D. Artificial intelligence

Answers

Answer:

The correct answer is B

Explanation:

Genetic engineering is an example of which application of because the genes are changed to get the desired features in an organism.

What is genetic engineering?

Genetic engineering is the process in which we alter the genetic makeup of an organism to produce desired characterictics in that organism.

So we can conclude that Genetic engineering is an example of which application of because the genes are changed to get the desired features in an organism.

Learn more about here Genetic engineering: https://brainly.com/question/2780091

Describe the law of conservation of mass in your own words *DO IT IN YOUR OWN WORDS PLEASE*​

Answers

Answer:

Chemical reactions and physical transformations do not create or destroy mass in an isolated system, according to the law of conservation of mass. The mass of the products in a chemical reaction must equal the mass of the reactants, according to the conservation of mass law. The law of conservation of mass can be used to solve for unknown masses, such as how much gas is consumed or produced during a reaction.

What is an example of Chemical energy to thermal energy to electrical current?​

Answers

Answer:

Coal is burned at power plant.

Explanation:

the chemical Energy is released as coal changes

have a good day

Which rule for assigning oxidation numbers is correct?
a.)Hydrogen is usually -1
b.)Oxygen is usually -2
c.)A pure group 1 element is +1
d.)A monatomic ion is 0

Answers

Answer:

Answer... Option B. Oxygen is usually -2; except in Peroxides

Other Questions
I WILL MARK BRAINLIEST DO NOT GUESS OR GIVE ME A FULE IF YOU DO WILL REPORT THANK YOUThere are 20 kittens in a box. Some of them are black. If the probability of randomly picking a black kitten is how many black kittens are in the box?(Photo above) Please help. When the writer stays with one main idea from the beginning of the paragraph to the end, the paragraph should have A) unityB) sequenceC) disarray A professor surveys students regarding personality as an example of Why are shadows longer in the morning and evening?Make sure you give a full, detailed answer, not just one sentence. Sin theta=x, 0degree Calculate the surface area?Please help Write an equation of the line that goes through the points (-5, 1) and (3, 2). A 10 foot long fence post is placed in a hole that is 3 feet deep.How much of the post is above ground? Please help!!What is the sum of the measures of the angles of a 25-gon?4,140253602,500 Humans depend on mineral resources. Describe TWO ways that people could use minerals mined from the ocean floor. While using a datasheet to track shoe orders, Gustav wants to see a picture of the shoes and read details about the shoes materials. Which steps should he follow? Double-click on the record in the Customer ID field, then double-click on the customer dialog box. Create a new field, select images of the shoes from the Internet, and embed images into OLE type. Create a new shoe identification field by clicking on Click to Add, and type notes using memo type. Double-click on the record in the Attachment field, then double-click on the attachment in the dialog box. Shoemakers of America forecasts the following demand for the next six months: 5000 pairs in month 1; 6000 pairs in month 2; 7000 pairs in month 3; 9000 pairs in month 4; 6000 pairs in month 5; 5000 pairs in month 6. It takes a shoemaker 20 minutes to produce a pair of shoes. Each shoemaker works 150 hours per month plus up to 40 hours per month of overtime. A shoemaker is paid a regular salary of $2000 per month plus $20 per hour for overtime. At the beginning of each month, Shoemakers can either hire or fire workers. It costs the company $1000 to hire a worker and $1200 to fire a worker. The monthly holding cost per pair of shoes is 5% of the cost of producing a pair of shoes with regular-time labor. The raw materials in a pair of shoes cost $10. At the beginning of month 1, Shoemakers has 15 workers and 500 pairs of shoes in inventory. Determine how to minimize the cost of meeting (on time) the demands of the next six months. A skull with a chin projected outward, and has wide nasal cavities and square eye orbits wouldlikely be? Select the correct answer.Wayne is holding a can of juice that has a diameter of 4 inches. There is a price tag stuck to the side of the can. Wayne places the can on its withside with the sticker on the bottom and rolls it across a table top at a constant speed. The can reaches Wayne's friend at the other end of thetable in 5 seconds and completes 4 full rotations,Which function could represent the price tag's height relative to the table top, h(t), after it has been rolling for e seconds?OA n(t) = 2008(832) +2O B. h(t) =-2005(522) +2OC h(t) = 2sin(572) +2OD. h(t) = 4sin (22) +4 What is the % ofincrease from 62 to88? (Round to thenearest tenth.) (NH4)2Cr2O7 Cr2O3 + N2 + H2OIf 4.7369 moles of H2O are produced, how many moles of (NH4)2Cr2O7 were reacted? Read the paragraph.Until 1965, half-dollars and quarters were 90% silver. In late 1965, the U.S. Mint ceased to produce silver coins and instead began to mint"Sandwich coins made of copper and nickel. This minting was done to allow the silver to be used for industrial purposes, where it was badlyneeded. Within a year, over 3.5 billion new coins had been minted, and the older silver ones were beginning to disappear from circulation.Which sentence best summarizes the paragraph? Solve, using the substitution method. X + y = -11 2x - 3y = 3A. (-6, -5)B. (-10, -1)C. (15, -4)D. (6, 1) What is a difference between cellular respiration and breathing?Select one:a.All animals have cellular respiration and also breatheb.All animals breathe , but not all animal have cellular respiration.c.All animals have cellular respiration, but not all animals breathe. HELPfind the value of x in a circle 8,x, 20,36