Answer:
Join it to the domain.
what is the bounce rate?
It's ideal to have a bounce rate between 26 and 40 percent. The average ranges from 41 to 55 percent. Depending on the website, a percentage of 56 to 70 percent is over average but may not be alarming.
What are bounce rate?Bounce rate, also known as single-page sessions divided by all sessions, is the proportion of all sessions on your site during which only one page was viewed and one request was made to the analytics server.User engagement can be evaluated using the bounce rate. You want people to visit your page and take action once there. even if only to look around If they don't, it can mean that your page's content, design, copywriting, or user experience are flawed.When the conversion rates are low and the bounce rates are in the 70s or higher, you have a problem. Low conversion rates and higher bounce rates are never good.A high bounce rate can indicate a number of issues with your website.To learn more about bounce rate refer to:
brainly.com/question/15062407
#SPJ1
When catching multiple exceptions that are related to one another through inheritance, you should handle the more specialized exception classes before the more general exception classes.
(T/F)
True, when catching multiple exceptions related by inheritance, you must handle the more specialized exception classes first, followed by the more general exception classes.
Java Catch Multiple Exceptions:
Multi-catch block in Java: One or more catch blocks can follow a try block. Every catch block must have its own exception handler. So, if you need to perform multiple tasks in response to different exceptions, use java multi-catch.Only one exception occurs at a time, and only one catch block is executed.All catch blocks must be ordered from most specific to most general, for example, catch for ArithmeticException comes before catch for Exception.To know more about Java exception, visit: brainly.com/question/29347236
#SPJ4
help so i took off stickers on the back monitor and i dont know how to get rid of this stuff pls help ive tried many things pls help
Answer:
get a damp paper dowel and gently wipe off that stuff
Tony, a system administrator, set up a printer on John's workstation. During the setup, Tony was able to print a test page. Later, when John attempted to print a document, an error message was displayed that indicates access was denied to the printer. John tried to restart the printer and workstation, but the same error message is displayed when he attempts to print a document. Which of the following MOST likely caused this issue?
Options are :
O The user lacks adequate security permissions to the printer (Correct)
O The printer lacks the memory required to process the document
O The print spooler is hung and must be restarted
O The printer is offline
The correct answer to the given question about system administrator is option a) The user lacks adequate security permissions to the printer.
A system administrator, also referred to as a sysadmin, administrator, or admin, is a person who is in charge of managing, setting up, and assuring the dependability of computer systems, especially multi-user computers like servers. The objective of the system administrator is to maintain the equipment under their control within a defined budget while meeting the users' expectations for uptime, performance, resources, and security. A system administrator can buy, install, or upgrade computer hardware and software, carry out routine automation, follow security policies, troubleshoot, manage employees, train staff, or provide technical support for initiatives in order to meet these requirements.
To learn more about system administrator click here
brainly.com/question/29894226
#SPJ4
which of the following programs will result in filterednames only containing the names of students who are 17 or older?O B- for var i=0 i
The program that will result in filtered names only containing the names of students who are 17 or older is for var i=0 i<ages, length, i++) age=ages [i] if (age<17) append items filtered names, age (17 and names). The correct option is b.
What is the program?A computer program is a sequence or set of instructions in a programming language for a computer to execute. Computer programs are one component of software, which also includes documentation and other intangible components.
Computer programs include MS Word, MS Excel, Adobe Photoshop, Internet Explorer, Chrome, etc. To create graphics and special effects for movies, computer applications are used.
Therefore, the correct option is b.
To learn more about the program, refer to the link:
https://brainly.com/question/29945466
#SPJ4
The question is incomplete. Your most probably complete question is given below:
for (var i = 0; i < ages.length; i++){ age = ages[i]; if (age < 17){ }
appendItem(filteredNames, age)
REPEAT 2 TIMES
{
REPEAT 2 TIMES
{
}
MOVE FORWARD ()
TURN_LEFT()
}
for(var i = 0; i < ages.length; i++){
age = ages[i];
if (age < 17){
appendItem(filteredNames, names[i])
}
for (var i = 0; i < ages.length; i++){
age = ages[i];
if (age >= 17){
appendItem(filteredNames, names[i])
}
Answer:
D. "Analise", "Ricardo", "Tanya"
Explanation:
Consider the following incomplete method that is intended to return an array that contains the contents of its first array parameter follow by contents of its second array parameter.
public static int[] appen(int[] al, int[] a2)
{
int[] result = new int[al.length + a2.length]
for (int j = 0; j < al.length; j++)
result[j] = al[j];
for (int k = 0; k < a2.length; k++)
result[ / index / ] = a2[k]
return result;
}
Which of the following expressions can be used to replace / index / so that append will work as intended?
(A) j
(B) k
(C) k + al.length - 1
(D) k + al.length
(E) k + al.length + 1
Answer: (D) k + a1.length
Explanation:
The best way to learn these type of questions would be to create a main class, where you implement the appen() method and test all of the options A-E
an analyst is cleaning a new dataset containing 500 rows. they want to make sure the data contained from cell b2 through cell b300 does not contain a number greater than 50. which of the following countif function syntaxes could be used to answer this question? select all that apply.
The countif function syntaxes that could be used to answer this question is =COUNTIF(B2:B300,"<=50").
The COUNTIF function counts the number of cells in the specified range that meet the criteria specified in the second argument (the criteria). In this case, the criteria is a string that specifies the condition "less than or equal to 50", so the function will count the number of cells in the range B2:B300 that contain a value less than or equal to 50. Here is an example of how you could use the COUNTIF function in a formula to check if the values in the range B2:B300 are less than or equal to 50:
=COUNTIF(B2:B300,"<=50")
The missing part in the question is shown below.
An analyst is cleaning a new dataset containing 500 rows. they want to make sure the data contained from cell b2 through cell b300 does not contain a number greater than 50. which of the following countif function syntaxes could be used to answer this question? select all that apply.
=COUNTIF(B2:B300,">50").
=COUNTIF(B2:B300,"<=50").
=COUNTIF(B2:B300,"<50").
=COUNTIF(B2:B300,"50").
Learn more about COUNTIF, here https://brainly.com/question/28180164
#SPJ4
ben works as a database designer for abc inc. He is designing a database that will keep track of all watches manufactured be each manufacturer. Each manufacturer produces a range of watches. Ben wants the database to be normalized. How many tables should he include in the database?
Since ben works as a database designer for abc inc., the numbers of tables that he include in the database is between 3- 5.
What is data table in database?All of the data in a database is stored in tables, which are database objects. Data is logically arranged in tables using a row-and-column layout akin to a spreadsheet. Each column denotes a record field, and each row denotes a distinct record.
Therefore, one can say that database management system (or DBMS) is just a computerized data-keeping system. Users of the system are provided with the ability to carry out a variety of actions on such a system for either managing the database structure itself or manipulating the data in the database and thus 3-5 is ok.
Learn more about database from
https://brainly.com/question/518894
#SPJ1
In c++, for every opening curly brace ({), there should be a closing curly brace (}) .
true or false
Answer: True
Explanation:
Which of the following are defined as correspondence?
I Written letter to a client
II E-mail
III Instant message
IV Group e-mail
A. I only
B. II and IV only
C. I, II, III only
D. I, II, III, IV
Email and a written letter to a client are both considered forms of correspondence. A contingency table is subjected to a weighted main components analysis in simple correspondence analysis.
What class of words are letters?Friendly conversation reciprocal interchange of manners, particularly correspondence between individuals. an agreement between events or things and the intended result.
What is the correspondence method?Different ways that journal entries balance debit and credit accounts are identified by correspondence approaches. Each document adheres to one of the accounting types shown in the following table, depending on the batch type or document type. The number of underlying dimensions in a contingency table with r rows and c columns is equal to the smaller of (r 1) or (c 1).
To know more about Email visit:-
https://brainly.com/question/14380317
#SPJ4
FILL IN THE BLANK. ___ is a form of supervised learning that is suitable for situations where data are abundant, yet the class labels are scarce or expensive to maintain and where the learning algorithm can query a person for labels.
Active learning is a form of supervised learning that is suitable for situations where data are abundant, yet the class labels are scarce or expensive to maintain and where the learning algorithm can query a person for labels.
What does supervised learning using examples mean?Predicting housing values is a real-world example of supervised learning issues.We must first gather information about the homes, such as their dimensions, number of rooms, characteristics, and whether or not they have gardens. The cost of these dwellings, or the labels that relate to them, must then be known. A subset of machine learning and artificial intelligence is supervised learning, commonly referred to as supervised machine learning. It is distinguished by the way it trains computers to properly categorize data or predict outcomes using labeled datasets.For issues where the data is in the form of labelled examples, where each data point has characteristics and a corresponding label, supervised learning is a machine learning paradigm.To learn more about supervised learning refer to:
https://brainly.com/question/25523571
#SPJ4
Build a 2-3 Tree using the following values. After the tree is built, what value(s) is/are in the root? 27 49 19 24 39 71 48 44 27 44 71 39 19 88 24 49 38
The value is in the root is 24 and 48.
What is meant by computer programming?Computer programming is the process of creating instructions and coding to enable certain tasks in a computer, application, or software program.
To create graphics and special effects for movies, computer applications are used. Medical examinations such as ultrasounds, X-rays, and other procedures are carried out using computer programs.
It is well known that one of the hardest subjects to master is programming. Given how different coding is from traditional educational techniques, including college degrees, it is not difficult to comprehend why some people find it impossible to learn how to code. in computer science.
To learn more about computer programming refer to :
https://brainly.com/question/23275071
#SPJ4
create one function to read the ids from the file employee.dat and tally how many belong to reach group. the function will need a temporary id variable to read into and evaluate.
To create one function to read the ids from the file employee.dat and tally how many belong to reach group and the function will need a temporary id variable to read into and evaluate, check the code given below.
What is variable?A variable is a named piece of data that has a value. Even if the value changes, the name doesn't. Variables are a common feature of programming languages, and they can take many different forms, depending on the script or software programmer.
Some variables are mutable, which means that their values can be altered. Other variables, known as immutable ones, cannot have their values added, changed, or removed after they have been assigned.
When a variable's value must conform to a specific data type, it is said to be typed.
#include<iostream>
#include<fstream>
#include<iomanip>
using namespace std;
void display_data(int arr[4]){
cout << "\n************************************************\n\n" ;
cout << arr[0] << " Employees belong to group 01 - HR \n\n" ;
cout << arr[1] << " Employees belong to group 02 - Purchasing \n\n" ;
cout << arr[2] << " Employees belong to group 03 - IT \n\n" ;
cout << arr[3] << " Employees belong to group 04 - Executive \n\n" ;
cout << "************************************************\n\n" ;
}
void read_data(){
ifstream ftp ;
ftp.open("Employee.dat" , ios::in);
int group[4] = {0, 0, 0, 0} ;
// Initialzing array of four integers to count number of employees in each section
int Id = 0 ;
while(!ftp.eof()){
ftp >> Id ;
if((Id >= 100) && (Id <= 299)){
group[0] = group[0] + 1;
}
else if((Id >= 300) && (Id <= 499)){
group[1] = group[1] + 1;
}
else if((Id >= 500) && (Id <= 799)){
group[2] = group[2] + 1;
}
else if((Id >= 800) && (Id <= 899)){
group[3] = group[3] + 1;
}
else{
cout << "\nInvalid Id Found\n" ;
break;
}
}
display_data(group) ;
}
int main(){
read_data();
return 0;
}
Learn more about variable
https://brainly.com/question/28463178
#SPJ4
using the countifs() formula, count how many successful, failed, and canceled projects were created with goals within the ranges listed above.
Using the knowledge of computational language in python it is possible to write a code that using the countifs() formula, count how many successful, failed, and canceled projects
Writting the code:COUNTIFS(criteria_range1, criteria1, [criteria_range2, criteria2]…)
=COUNTIFS(D2:D21, “Cell Phone”, C2:C21, “South”)
=COUNTIF(range,criteria)+COUNTIF(range,criteria)
=COUNTIFS(B2:B18,“arts”,C2:C18,3)
=COUNTIFS(C2:C21, “west”, E2:E21, “>400”)
=COUNTIFS(C2:C21, “west”, E2:E21, “>”&400)
=COUNTIFS(C2:C21, “north”, D2:D21, “<>cell phone”)
=COUNTIFS(A2:A21,G2,D2:D21, “>=”&G3)
=COUNTIFS(A2:A21,G2,D2:D21, G3)
=COUNTIFS(A2:A21,DATE(2022,11,21),D2:D21, “>=”&1500)
=COUNTIFS(A2:A21, “<”&G2,D2:D21, “>=”&G3)
=COUNTIFS(A2:A18,"*1??",C2:C18,3)
=COUNTIFS(Courses,F2,Faculties,F3,Buildings,F4)
=COUNTIFS(H6:H22,F2,C2:C18,F3)
See more about EXCEL at brainly.com/question/18502436
#SPJ1
The figure below represents a network of physically linked devices, labeled A through F. A line between two devices indicates a connection. Devices can communicate only through the connections shown.
Which of the following statements are true about the ability for devices A and C to communicate?
The network is fault tolerant. If a single connection fails, any two devices can still communicate. Computers B and F need to first communicate with at least one other device in order to communicate with each other. The correct statements are I and II.
What is a network?Computer networking is the term for a network of connected computers that may communicate and share resources.
These networked devices transmit data through wireless or physical technologies using a set of guidelines known as communications protocols.
Local-area networks (LANs) and wide-area networks are two fundamental types of networks (WANs). LANs use links (wires, Ethernet cables, fibre optics, and Wi-Fi) that carry data quickly to link computers and peripheral devices in a constrained physical space, such as a corporate office, lab, or college campus.
The network can withstand errors. Any two connected devices can still communicate even if one connection breaks. In order to communicate with at least one other device, Computers B and F must first communicate with that device.
Thus, both the statements are correct.
For more details regarding networking, visit:
https://brainly.com/question/15002514
#SPJ4
Your question seems incomplete, the complete question is:
The figure below represents a network of physically linked computers labeled A through F. A line between two computers indicates that the computers can communicate directly with each other. Any information sent between two computers that are not directly connected must go through at least one other computer. For example, information can be sent directly between computers A and B, but information sent between computers A and C must go through other computers.
Which of the following statements are true about this network:
I - The network is fault tolerant. If a single connection fails, any two devices can still communicate.
II - Computers B and F need to first communicate with at least one other device in order to communicate with each other.
Several users at an adjacent office building report intermittent connectivity issues after a new flag pole was installed between the two offices. The network technician has determined the adjacent office building is connected to the main office building via an 802.11ac bridge. The network technician logs into the AP and confirms the SSID, encryption, and channels are all correct. Which of the following is MOST likely the cause of this issue?
Signal attenuation is most likely the cause of the issue that users are facing in the given question.
Signal attenuation refers to the reduction in signal power in networking cables or connections. This is often expressed as a change in voltage or decibels (dB), and it can happen for a number of reasons. It can result in distorted or undetectable signals. Passive media elements like cables, cable splices, and connectors are what produce attenuation. Attenuation still happens during both multimode and single-mode transmission even if it is substantially less for optical fiber than for other media. Instead of reducing the length of the PCB routing, signal attenuation can be decreased by choosing lower loss materials, however this comes at a greater expense. By altering the epoxy used across the glass weave, materials with reduced attenuation can be produced with a lower dissipation factor.
To learn more about Attenuation click here
brainly.com/question/20368482
#SPJ4
Which of the following is a routing protocol proprietary to Cisco that combines the features of link-state and distance vector routing protocols? O a Enhanced Interior Gateway Routing Protocol Ob. NetBEUL O Both A and B Od. None of the above 4
On a computer network, the Enhanced Interior Gateway Routing Protocol (EIGRP) is a sophisticated distance-vector routing protocol used to automate routing design and decisions. The proprietary protocol was created by Cisco Systems and is exclusively supported by Cisco routers.
Is STP a protocol that Cisco only uses?A proprietary variant of Rapid Spanning Tree Protocol was also released by Cisco. Similar to PVST, it builds a spanning tree for each VLAN.
A link-state protocol, is EIGRP?Due to its similarities to both link-state and distance-vector protocols, EIGRP is frequently referred to as a hybrid routing protocol.
To know more about EIGRP visit:-
https://brainly.com/question/29376286
#SPJ4
the distinction between application and infrastructure security: application security is designed to resist attacks. infrastructure security is the software configured to resist attacks
Application security is a difficulty for software engineers since the system must be made to withstand attacks. Configuring the infrastructure to defend against attacks is a key component of infrastructure security, which is a systems management challenges.
What is application security?
All tasks that introduce a secure software development life cycle to development teams are included in application security. Its ultimate purpose is to enhance security procedures and, through that, to identify, address, and ideally avoid security flaws in applications. Application security controls are strategies to increase an application's coding-level security, making it less susceptible to attackers. A lot of these options relate to how the application reacts to unforeseen inputs that a hacker might use to exploit a flaw.
One well-known instance is static code analysis, in which a testing tool gets direct access to the application's source code. White box testing can spot poor code quality problems, security setting errors, and unsafe coding techniques.
To learn more about application security, use the link given
https://brainly.com/question/26701098
#SPJ4
Technological singularity is point at which artificial intelligence advances so far that we cannot comprehend what lies on the other side
When artificial intelligence reaches the technological singularity, humans will not be able to understand what is on the other side.
What does "technological singularity" mean?The singularity in technology is a possible future in which unchecked and unstoppable technological advancement occurs. These sophisticated and potent technologies will fundamentally alter our reality in unpredictable ways.
What occurs when technology reaches its singularity?The technological singularity, often known as the singularity, is a possible future time point at which technological advancement becomes unstoppable and irreversible, bringing about unexpected changes to human civilization.
To know more about artificial intelligence visit:-
https://brainly.com/question/23824028
#SPJ4
Question:
at which artificial intelligence advances so far that we cannot comprehend what lies on the other side?
innovations in shipping and the growth of commercial networks were most directly related to which of the following other developments of the first half of the nineteenth century? innovations in shipping and the growth of commercial networks were most directly related to which of the following other developments of the first half of the nineteenth century?
Because the development of commercial networks and innovations in shipping were most closely linked to option B: the migration of more Americans to the west of the Appalachian Mountains.
What exactly is a business network?
Business networks are tremendous organizations, and the scale is the primary qualification among them and home organizations. Commercial networks and their smaller siblings, residential networks, use similar protocols, networking topologies, and services.
Companies can reap many advantages from networking, including: Build connections: You can form strong bonds with influential figures from a variety of industries by connecting with other businesses through networking, and you can contact them whenever you need to.
As a result, innovation can take the form of either a novel product, such as an invention, or the procedure of developing and introducing a novel product. Innovation is usually the cause of a new product, but it can also mean a new way of thinking or doing things.
Learn more about Innovations from
brainly.com/question/19969274
#SPJ4
Build an AVL tree from the following values, which value is the first to become the Alpha node? 35, 49, 22, 27, 64, 60 O 35 O 60 O 64 O 49 O 27 O 22
Creating an AVL tree, the value indicating the first alpha node would be 49 because the alpha node is the node that needs to be rebalanced. A node is basic unit of data structures such as a linked list or tree data structure.
What does AVL tree mean?AVL tree is a kind of binary search tree. Like a binary search tree, it consists of a "root" node and "leaf" nodes. Each node has at most two children, the left child being smaller than the parent and the right child being larger than the parent. However, binary search trees can be either unbalanced or balanced.
What is the balance factor of the nodes in the AVL tree?The balance factor for a node in an AVL tree is the height difference between the left and right subtrees of that node. The self-balancing property of the AVL tree is maintained by the balancing factor. The correction factor value must always be -1, 0, or +1.
How can I find a node in the AVL tree?Start at the root of the tree and compare the key to the node's value. Returns a node if the key is equal to the value. If the key is greater, search from the right child, otherwise continue searching from the left child.
To learn more about AVL tree visit:
https://brainly.com/question/30005720
#SPJ4
6) Which of the following Venn diagrams closely represents the relationship between various disciplines and sub-disciplines one wh 1 CS/IT DM ut with an in PATIENT ML DM ML STATS CS DM ML
The Venn diagrams that closely represents the relationship between various disciplines and sub-disciplines is option C;
What are Venn diagrams?The similarities and differences between objects or groups of objects are displayed using a Venn diagram using circles that either overlap or do not overlap. Circles that share characteristics are displayed as overlapping, but those that are unique stand alone.
A Venn diagram employs circles or other shapes that overlap to show the logical connections between two or more groups of objects.
Therefore, option C is selected because when you look at the diagram. they are all existing in one environment and they can easily interact with one another. This is not the same with the other two because they only shows two association instead of three.
Learn more about Venn diagrams from
https://brainly.com/question/2099071
#SPJ1
Lisa needs to identify if a risk exists on a web application and if attackers can potentially bypass security controls. However, she should not actively test the application. Which of the following is the BEST choice?A. perform a penetration testB. perform a port scanC. perform a vulnerability scanD. perform traffic analysis with a sniffer
Perform a vulnerability scan. The practice of locating security holes and faults in computer systems and the software that runs on them is known as vulnerability scanning.
What does a vulnerability scan do?The practice of locating security holes and faults in computer systems and the software that runs on them is known as vulnerability scanning. This is a crucial part of a vulnerability management program, which has as its main objective safeguarding the organization from breaches and the disclosure of private information.Although different security professionals may refer to the various steps of security exploit detection or types of vulnerability scans by different names, security scanning often falls into one of three categories: Exploration Scanning. Complete Scanning scanning for compliance.
To learn more about vulnerability scan refer,
https://brainly.com/question/25633298
#SPJ4
TRUE OR FALSE in most modern relational dbmss, a new database implementation requires the creation of special storage-related constructs to house the end-user tables.
Answer:
Trueeee
Explanation:
:DD
suppose the method printstar(n) is given to display n stars. write a recursive method printtriangle(k) that displays a triangle. for example, printtriangle(5) displays * ** *** **** *****
Launch the algorithm, Verify that the value(s) being processed right now match the base case. Rephrase the solution in terms of a more manageable or straightforward sub-problem or sub-problems. Execute the algorithm on the related issue.
How do I construct a JavaScript recursive function?Recursive functions are those that call themselves repeatedly. Recursive functions have the following syntax: function recurse(); / function code recurse(); The recursive function in this case is called recurse().
Recursive formula examples: what are they?Any term of a series can be defined by its preceding term in a recursive formula (s). For instance: An arithmetic series has the recursive formula a = an-1 + d. An = An-1r is the recursive formula for a geometric sequence.
To know more about Recursive functions visit:-
https://brainly.com/question/25762866
#SPJ4
In database access control area, which of following statement is the best to explain Authentication O Methods to restrict users to access the database system O Control to access to partial database o verifying whether a user is the claimed user o defining the scope of access O All above mentioned
In database access control area, which of following statement is the best to explain Authentication- verifying whether a user is the claimed user.
What exactly is authentication?To the server or client, the user or computer must authenticate their identity. A user name and password are typically required for server authentication. Card-based authentication, retinal scanning, voice recognition, and fingerprint authentication are additional options.
3 distinct types of authentication?Three categories of authentication factors exist: A token, like a bank card, is something you have; a password or personal identification number (PIN) is something you know; and biometrics, like voice and fingerprint recognition, are something you are.
To know more about Card-based authentication visit:-
brainly.com/question/29031868
#SPJ4
note: this is a multi-part question. once an answer is submitted, you will be unable to return to this part. consider the following symbols and their frequencies: a: 0.20, b: 0.10, c: 0.15, d: 0.25, e: 0.30 since b and c are the symbols of least weight, they are combined into a subtree, which we will call t1 for discussion purposes, of weight 0.10 0.15
Average number of bits required to encode a character in Huffman code for the given weights and given frequencies is = 2 x 0.20 + 3 x 0.10 + 3 x 0.15 + 2 x 0.25 + 2 x 0.3 = 2.25
What is Huffman code?
A lossless data compression algorithm is huffman coding. Input characters are given variable-length codes, the lengths of which are determined by the frequency of the matching characters.
The character used the most often is given the smallest code, and the character used the least often is given the largest code.
The variable-length codes (bit sequences) assigned to input characters are Prefix Codes, which indicates that no other character will have a code that is the prefix of the code assigned to that character.
This is how Huffman Coding ensures that the produced bitstream cannot contain any ambiguities during decoding.
The concept of prefix code, which states that a code associated with a character should not be included in the prefix of any other code, is used by Huffman Coding to avoid any ambiguity in the decoding process.
To know more about Huffman code, visit: https://brainly.com/question/15709162
#SPJ4
TRUE/FALSE. users spend the majority of their time on smart phone using apps, and apps are incrasibly creating content specific alternatives to 's web based search
Users spend a majority of their time on smart phone using apps, and apps are increasingly creating content specific alternatives to Gσσgle's web based search. (True)
What is web?The World Wide Web is also known as the "Web," and it is a portion of the Internet that consists of pages that can be accessed through a Web browser. Many people mistakenly believe that the Web and the Internet are one and the same thing and interchange the two terms.
However, the global server network that enables information sharing over the Web is referred to as the "Internet" in actuality. The Internet and the Web are therefore not the same thing, despite the Web comprising a sizable portion of the Internet.
A language called Hypertext Markup Language is used to format web pages (HTML). Users can navigate between Web pages using links thanks to this language.
Learn more about web
https://brainly.com/question/22650550
#SPJ4
In Java, create a program to determine the perimeter and area of a rectangle. Write a rectangle class with a separate runner class. Allow the user to input the rectangle length and width. All should be tested in a runner. You need: file input using scanner, instance variables, constructors, minimum of 3 objects and 3 methods.
Example:
Please enter the length of the rectangle (in inches): 6
Please enter the width of the rectangle (in inches): 10
The area of the rectangle is 60 inches. The perimeter is 32 inches. Would you like to run another (y/n)?
The program to determine the perimeter and area of a rectangle can be written in Java programming language.
The code in Java is,
import java.util.*;
class Rectangle
{
private double l,w;
public Rectangle(double l,double w)
{
this.l=l;
this.w=w;
}
public double getArea()
{
return l*w;
}
public double getPeri()
{
return 2*(l+w);
}
public void printInfo()
{
System.out.println("The area of the rectangle is "+getArea()+" inches. ");
System.out.println("The perimeter is "+getPeri()+" inches.");
}
}
public class Main {
public static void main (String [ ] args)
{
Scanner sc=new Scanner(System.in);
char choice='y';
while(choice!='n'&&choice!='N')
{
System.out.println("Please enter the length of the rectangle (in inches): ");
double l,w;
l=sc.nextDouble();
System.out.println("Please enter the width of the rectangle (in inches): ");
w=sc.nextDouble();
Rectangle r=new Rectangle(l,w);
r.printInfo();
System.out.println("Would you like to run another (y/n)?: ");
choice=sc.next().charAt(0);
}
}
}
The variable l and w is to input for the length and width of rectangle, we can change the variable name.
We use the double datatype to ensure the precise calculation, also to provide the flexibility to the user since it doesn't only accept the integer number.
Learn more about Java here:
brainly.com/question/26642771
#SPJ4
Python task
Enter 8 grades of the student received by him during the study of the topic. Determine the student's average grade for the topic. Determine how many marks are higher than 50.
Enthalpy Changes the overall energy change in the substance portrayed in the graph at 48°C.
What are the data that were obtained from the question?Mass (m) = 0.3 Kg
Initial temperature (T1) = 20°C
Heat (Q) added = 35 KJ
Specific heat capacity (C) = 4.18 KJ/Kg°C
Final temperature (T2)
The final temperature of water can be obtained as follow:
Q = MC(T2 – T1)
35 = 0.3 x 4.18 (T2 – 20)
35 = 1.254 (T2 – 20)
Clear the bracket
35 = 1.254T2 – 25.08
Collect like terms
1254T2 = 35 + 25.08
1.254T2 = 60.08
Divide both side by the coefficient of T2 i.e 1.254
T2 = 60.08/1.254
T2 = 47.9 ≈ 48°C
Therefore, the final temperature of the water is 48°C.
Learn more about temperature on:
https://brainly.com/question/11464844
#SPJ1