solve please. i have permission
Your division is considering two projects with the following cash flows (in millions): 0 2 3 Project A Project B -$17 -$26 $8 $13 What million a. What are the projects' NPVS assuming the WACC is 5%? E

Cost-Benefit Analysis (CBA) is a method of calculating the benefits and costs of a project. It aims to identify whether the project would be profitable and worth pursuing.

When conducting CBA for the construction of a rapid transit system parallel to a major city street, there are various problems associated with the calculation of CBA. These include:

1. Choice of discount rate: When carrying out the CBA for a rapid transit system, it is essential to consider the discount rate. The discount rate is the rate used to convert future benefits and costs into present value. The choice of the discount rate is crucial, as it can have a significant impact on the outcome of the CB

2. Shadow prices: Shadow prices refer to the price of a resource that is not usually traded in the market. These include environmental factors such as air quality and green spaces.

3. Double-counting of costs or benefits: Double-counting occurs when a single item is counted twice in the CBA analysis. For instance, the benefits of reduced traffic congestion may be counted both as travel time saved and the reduction in vehicle operating costs

4. Salvage values: Salvage value refers to the value of an asset after its useful life has ended

5. Price distortions: When carrying out CBA, price distortions can occur when prices do not reflect the true cost of a good or service. The response of commuters could end up reducing the benefits of the investment in rapid transit envisioned by the study as follows: Traffic congestion may lead to an increase in the time it takes to travel from one point to another.

The construction of rapid transit systems aims to reduce traffic congestion and the associated costs. However, if commuters do not adopt the new rapid transit system, then the benefits may not be realized. Commuters may prefer to continue using their vehicles, leading to the same level of traffic congestion as before. If this happens, the expected benefits of the rapid transit system may not be realized, and the cost-benefit analysis would be rendered ineffective.

To know more about Cost-Benefit Analysis refer to:

https://brainly.com/question/30096400

#SPJ11

The Appropriation Account for year ended 2021 December 31 is Lace 30,357 Shoe 31,548 61,905 74,425 74,425. The capital Accounts as at December 31, 2021 $ $ Shoe 31,548 Lace 30,357 61,905 61,905 and current Accounts as at December 31, 2021 is closing capital balance of Shoe is $31,548 and the closing capital balance of Lace is $30,357.

A. Profit and Loss Account for the year ended December 31, 2021

$ $ Gross profit 150,000

Less:

Bad debts 50 650

Office salaries 40,000

Advertising 29,880

Electricity 1,545

Depreciation (Equipment) 3,000

Net profit 75,925

Appropriation Account for the year ended December 31, 2021 $ $ Interest on capital:

Lace (20% of 30,000) 6,000

Shoe (20% of 30,000) 6,000 12,000

Interest on drawings:

Lace (5% of 4,400) 220

Shoe (5% of 6,000) 300 520

Balance c/d:

Lace 30,357

Shoe 31,548 61,905 74,425 74,425

B. Capital Accounts as at December 31, 2021 $ $ Shoe 31,548 Lace 30,357 61,905 61,905

C. Current Accounts as at December 31, 2021 $ $ Shoe Lace Shoe 9,025 31,548 Lace 19,332 2,640 28,797 34,188. The current account balance of Shoe is a credit of $9,025.

The current account balance of Lace is a debit of $2,640.

The closing capital balance of Shoe is $31,548.

The closing capital balance of Lace is $30,357.

Learn more about the current and capital account from the given link-

https://brainly.com/question/22333470

#SPJ11

The accompanying best makes sense of why the increase in the markup makes the regular pace of unemployment rise it shifts the price-setting relation downward, decreasing the real wage.

The option (C) is correct.

when the markup increments, it implies that organizations can charge greater costs for their items contrasted with their creation costs. Subsequently, the cost setting connection, which decides the cost level in view of expenses and markups, shifts descending.

This shift prompts a diminishing in the real wage, which is the compensation adapted to expansion or the buying force of the pay. A decline in genuine pay implies that specialists are really procuring less as far as what they can purchase with their wages.

Learn more about unemployment:

https://brainly.com/question/17205513

#SPJ4

The statement that is not true concerning target costing is D. A primary advantage of target costing is that it requires little or no coordination among processes.

Target costing is a strategic cost management technique used by businesses to manage costs during the product development phase. It involves setting a target cost for a product based on the price that customers are willing to pay, and then working backward to determine the allowable cost of the product.

Option A is true: Target costing can be applied to components of products as well as new products as a whole. It allows businesses to identify cost reduction opportunities at various levels, whether it's individual components or the overall product.

Option B is true: Short product life cycles increase the importance of target costing. In industries where products have short life cycles, such as technology or fashion, it is crucial to manage costs effectively to stay competitive and meet customer demands.

Option C is true: Implementing target costing requires detailed information on the cost of alternative activities. To determine the target cost, businesses need to analyze the cost of various activities involved in the production process, identify cost drivers, and explore alternative options to reduce costs.

Option D is not true: A primary advantage of target costing is not that it requires little or no coordination among processes. In fact, implementing target costing requires coordination and collaboration among various functions within the organization, such as design, engineering, production, and finance. Effective communication and collaboration are necessary to align the target cost with the desired product features, identify cost reduction strategies, and implement changes throughout the development process.

In summary, option D is the statement that is not true concerning target costing. Target costing requires coordination and collaboration among processes to achieve the desired cost objectives while meeting customer requirements.

Learn more about  coordination here: brainly.com/question/20282507

#SPJ11

Advantages of government-created monopolies in the minibus service:

1. Reliable and Accessible Service: A government-created monopoly can ensure a reliable and accessible minibus service.

2. Coordination and Efficiency: Having a government monopoly allows for better coordination and planning of minibus routes and schedules.

Disadvantages of government-created monopolies in the minibus service:

1. Lack of Competition and Innovation: A government monopoly may stifle competition, leading to reduced incentives for innovation.

2. Limited Consumer Choice and Pricing Control: In a government-created monopoly.

Advantages of government-created monopolies in the minibus service:

1. Reliable and Accessible Service: A government-created monopoly can ensure a reliable and accessible minibus service in remote districts that may not be adequately served by other forms of public transportation. By granting exclusive rights to a single operator, the government can ensure that the service is consistently available to meet the transportation needs of the residents, including those who work or study in remote areas.

2. Coordination and Efficiency: Having a government monopoly allows for better coordination and planning of minibus routes and schedules. The monopoly operator can optimize the service by strategically planning routes, ensuring efficient utilization of resources, and minimizing duplication or overlap with other transportation options. This can lead to better service coverage, reduced congestion, and improved overall efficiency in transportation operations.

Disadvantages of government-created monopolies in the minibus service:

1. Lack of Competition and Innovation: A government monopoly may stifle competition, leading to reduced incentives for innovation and improvement in service quality. Without market competition, the monopoly operator may have little motivation to invest in upgrading the fleet, adopting new technologies, or exploring alternative routes or service models. This can result in a stagnant and potentially suboptimal minibus service that fails to adapt to changing customer needs.

2. Limited Consumer Choice and Pricing Control: In a government-created monopoly, consumers have limited choices and may be subjected to monopolistic pricing practices. With no competing alternatives, the monopoly operator can potentially charge higher fares without fear of losing customers to competitors. This lack of competition and pricing control can lead to higher transportation costs for users and limit their ability to switch to more affordable or convenient transportation options.

It is important to note that the pros and cons of government-created monopolies in the minibus service may vary depending on specific contexts and the effectiveness of regulatory measures in place.

For more such information on: monopolies

https://brainly.com/question/7217942

#SPJ11

The given data is:Produced units: 2,300Sold units: 1,800Cost of producing one unit (Variable manufacturing cost): $23Selling price per unit: $103 Variable manufacturing costs per unit $23

Variable marketing costs per unit $8Fixed manufacturing costs per unit $14Administrative expenses, all fixed per unit $20Ending inventories: Direct materials 0, WIP 0, Finished goods 500 unitsCost of goods sold using variable costing:The total variable cost is:Variable manufacturing cost per unit × Number of units= $23 × 1,800= $41,400

Variable marketing cost per unit × Number of units= $8 × 1,800= $14,400The total cost of goods sold using variable costing is:Total variable cost + Fixed manufacturing cost per unit × Number of units= $41,400 + ($14 × 1,800)= $41,400 + $25,200= $66,600The cost of goods sold per unit using variable costing:Total cost of goods sold / Units sold= $66,600 / 1,800= $37Therefore, the cost of goods sold per unit using variable costing is $37 (option C).

To know more about manufacturing visit:

https://brainly.com/question/29489393

#SPJ11

a. Critical points about this theory: We live in a risk society where risks are not natural, but produced by human activities, such as industrial production, transportation, medicine, science, and technology.

We can recognize the risks, but not their consequences. The consequences of the risks are not evenly distributed in society; some groups are more vulnerable than others to environmental and health risks. The risks are global, and we cannot contain them within national. Example: One example of this is climate change which affects everyone across the world, but some groups will experience its consequences more acutely than others. Another example is the COVID-19 pandemic which has shown how interconnected and vulnerable we all are to global risks.b.

It is essential that we have a macro and micro vision of the world because Macro: It allows us to see the big picture of the risk society and how it affects us all. We can understand how risks are produced, how they are distributed, and how they are managed. It helps us to see the interconnections between different risks and how they interact. Micro:It allows us to see how the risk society affects individuals and communities in different ways. It helps us to understand how people perceive and respond to risks based on their social, economic, and cultural backgrounds. It allows us to see how social capital can be used to mitigate risks and create resilience.

To know more about technology visit:

https://brainly.com/question/28288301

#SPJ11

True. Breakthrough discoveries often require deep technical expertise to understand complex problems and develop innovative solutions. Extensive networks within scientific and technical communities provide access to knowledge, resources, and collaboration opportunities, enhancing the chances of success in translating discoveries into practical applications.

Breakthrough discoveries often involve solving complex technical problems that require specialized knowledge and expertise. Having a deep understanding of the underlying principles and technologies is crucial for identifying novel approaches and developing innovative solutions. Without technical expertise, it can be challenging to navigate the intricacies of the field and make significant breakthroughs.

Additionally, extensive networks within scientific and technical communities play a vital role in breakthrough discoveries. These networks provide access to cutting-edge research, collaboration opportunities, and mentorship from experts in the field. Building connections with other researchers, scientists, and industry professionals can lead to valuable insights, funding opportunities, and partnerships that accelerate the development and commercialization of breakthrough discoveries.

In summary, deep technical expertise and extensive networks within scientific and technical communities are often critical factors for entrepreneurial teams seeking to make breakthrough discoveries.

Learn more about entrepreneurial here:

https://brainly.com/question/30103080

#SPJ11

The sale price, with an original price of $68.00 and a discount rate of 38%, is $42.16. Therefore, the correct option is (C).

To find the sale price, we need to calculate the discount amount and subtract it from the original price.

Discount amount = Original price × Discount rate

Discount amount = $68.00 × 0.38 = $25.84

Sale price = Original price - Discount amount

Sale price = $68.00 - $25.84 = $42.16

Therefore, the correct answer is:

C. $42.16

For more such questions on Sale price:

https://brainly.com/question/28189871

#SPJ11

Selling expenses encompass all depreciation costs. The operating activities' net cash flow is $ 276,000 . Option B is correct.

Working:

                                       Oriole Company

                                     Statement of Cash Flows

                       For the Year Ended December 31, 2022

Cash flows from operating activities:    

Net Income                                                                           $ 276,000

Adjustments to reconcile net income to    

     Net cash provided by operating activities    

Depreciation expense                                                 $ 87,000  

Loss on sale of equipment [285000-240000]         $ 45,000  

Increase in Account Receivables [83600-96800]  $ (146,000)  

Decrease in Inventory [482000-386000]                  $ 96,000

Increase in accounts payable [176000-97000]            $79,000  

Decrease in Income taxes payable [351000-393000]  $(42,000)

                                                                                                          $119,000

     Net cash Provided by operating activities                    $ 395,000

T-Account: Calculation of depreciation:

                                     Accumulated Depreciation

Depreciation Of sold asset   $69,000   Beg Balance          $304,000

[354000-285000]                                                                                            

                                                   Depreciation Expense   $87,000

                                                      End Balance           $322,000

Due to use, wear and tear, or becoming obsolete, an asset loses value over time. Depreciation is the measurement of this decrease. Depreciation, or the value loss of an asset, can also be brought on by a variety of other factors, such as adverse market conditions, for example. A appreciable asset's wear and tear, consumption, or other loss of value is measured by depreciation.

Other factors that contribute to depreciation include use, the passage of time, and changes in technology and the market. Devaluation cost is the sum that an organization's resources are deteriorated for a solitary period (e.g, quarter or the year), while collected devaluation is the aggregate sum of wear to date. Accumulated depreciation and depreciation expense are not the same thing.

Learn more about depreciation :

brainly.com/question/29894489

#SPJ4

Complete question as follows :

Oriole Company has recently decided to go public and has hired you as an independent CPA. One statement that the enterprise is anxious to have prepared is a statement of cash flows. Financial statements of Oriole Company for 2022 and 2021 are provided below. BALANCE SHEETS 12/31/22 Cash $408000 Accounts receivable 360000 Inventory 386000 Property, plant and equipment $607000 Less accumulated depreciation (322000) 285000 $1439000 12/31/21 $ 192000 214000 482000 $958000 (304000) 654000 $1542000 Accounts payable Income taxes payable Bonds payable Common stock Retained earnings $ 176000 351000 362000 228000 322000 $1439000 $ 97000 393000 598000 218000 236000 $1542000 $8390000 7154000 1236000 INCOME STATEMENT For the Year Ended December 31, 2022 Sales revenue Cost of sales Gross profit prom Selling expenses $602000 Administrative expenses 192000 Income from operations Interest expense Income before taxes Income taxes Net income 794000 442000 74000 368000 92000 $ 276000 The following additional data were provided: sale. The loss on sale was incorrectly charged to 1. Dividends for the year 2022 were $190000. 2. During the year, equipment was sold for $240000. This equipment cost $354000 originally and had a book value of $285000 at the time cost of sales 3. All depreciation expense is in the selling expense category. The net cash provided by operating activities is

A.  $189000

B.  $276000

C. $395000

D. $231000.

Therefore, the sales revenue necessary to yield a monthly net profit margin of 10% is £60,000. The correct option is C.

To calculate the sales revenue necessary to yield a monthly net profit margin of 10%, we need to consider the variable costs, fixed costs, and desired net profit margin.

Gross Contribution Margin: 40%

Variable Selling Expenses: 10%

Fixed Overheads: £12,000 per month

Desired Net Profit Margin: 10%

Let's denote the sales revenue as "X".

The gross contribution margin is calculated as a percentage of sales, so it can be expressed as 40% of X: 0.40X.

The variable selling expenses are also calculated as a percentage of sales, which is 10% of X: 0.10X.

Therefore, the contribution margin after deducting variable selling expenses is:

Contribution Margin = Gross Contribution Margin - Variable Selling Expenses

= 0.40X - 0.10X

= 0.30X

Now, we can calculate the contribution margin that covers the fixed costs:

0.30X - £12,000 = desired net profit margin * X

Since the desired net profit margin is 10% (or 0.10), we have:

0.30X - £12,000 = 0.10X

Simplifying the equation:

0.30X - 0.10X = £12,000

0.20X = £12,000

X = £12,000 / 0.20

X = £60,000

Therefore, the sales revenue necessary to yield a monthly net profit margin of 10% is £60,000.

To know more about sales revenue visit:

https://brainly.com/question/28580932

#SPJ11

The RBA's assessment of the situation has improved due to better-than-expected economic performance and progress in vaccination against COVID-19. The bank has maintained the cash rate at 0.1% and plans to continue supporting the economy through its bond-buying program.

In policy announcements made last year, the Reserve Bank of Australia (RBA) indicated that it was unlikely to raise the cash rate until 2024 at the earliest. However, since then, the RBA’s assessment of the situation has changed due to various factors.

The Australian economy has performed better than expected, and the country's progress in vaccination against COVID-19 has been encouraging. These factors have contributed to the RBA's improved assessment of the situation.In July 2021, the RBA announced that it would maintain the current policy settings, including the cash rate target at 0.1%, but would adjust its bond-buying program's pace. The RBA has acknowledged that economic growth is expected to be strong in 2021 and 2022. The bank also noted that inflation is expected to rise temporarily due to supply chain disruptions and higher oil prices, but the RBA predicts that it will stabilize at about 2%.

The RBA Governor, Philip Lowe, noted that the bank is still not considering an increase in the cash rate, but it may start to gradually taper its bond purchases if the economy continues to perform well. The bank also plans to keep inflation between 2-3%, which is the target rate.

In conclusion, the RBA's assessment of the situation has improved due to better-than-expected economic performance and progress in vaccination against COVID-19. The bank has maintained the cash rate at 0.1% and plans to continue supporting the economy through its bond-buying program. However, if the economy continues to perform well, the RBA may consider tapering its bond purchases in the future.

Learn more about Reserve Bank of Australia here:

https://brainly.com/question/31573317

#SPJ11

Actual production exceeding projected output results in an abnormal gain. Cost per unit for a time is calculated by dividing overall cost by anticipated production, as well as any exceptional loss or gain. process account and reconcile it. A process account is credited with an abnormal loss (a cost) and debited with an abnormal gain (a benefit).

Given

A and Usually, there is a weight loss of 5% in each process and the normal loss of 10% in each process. The scrap of process A is sold at Rs 80 per unit, and the scrap of B is sold at Rs 200 per unit.

                                          Process A           Process B

The material in tonnes          1000                        70

Cost of Materials per tonne Rs 125                   Rs 200

Wages                                   Rs 28,000             Rs 10,000

Manufacturing expenses     Rs 8,000                Rs.5250

Output in tonnes                     830                       780

Required to calculate abnormal loss and abnormal gain =?

Process A

Material cost = 1000 tonnes x Rs 125/tonne = Rs 1,25,000

Wages = Rs 28,000

Manufacturing expenses = Rs 8,000

Abnormal loss = 10% of input = 1000 tonnes x 10% = 100 tonnes

Scrap sale = Abnormal loss x Scrap price = 100 tonnes x Rs 80/tonne = Rs 8,000

Process B transfer = 830 tonnes (output of Process A)

Process B

Material cost = 70 tonnes x Rs 200/tonne = Rs 14,000

Wages = Rs 10,000

Manufacturing expenses = Rs 5,250

Abnormal loss = 10% of input = 70 tonnes x 10% = 7 tonnes

Scrap sale = Rs 0 (no scrap sale from Process B)

Closing stock = 780 tonnes (output of Process B)

Thus, Abnormal gain transferred to the Abnormal Gain Account = Rs 3,500

Abnormal gain transferred from Process A = Rs 6,250

Learn more about Abnormal gain and Abnormal loss here:

https://brainly.com/question/32139548

#SPJ4

a. The amount you should invest in Equity is $48,250,000.b. The amount you should invest in T-bills is $63,750,000.What is portfolio insurance?Portfolio insurance is a risk management technique that involves purchasing stock index futures to protect against the risk of a declining market. This involves using hedging techniques to offset the risk of a particular investment. It is a technique to limit risk. Portfolio insurance is most commonly used by investment companies to protect their client's portfolios.In this question, you are a provider of portfolio insurance and are establishing a 4-year program. The portfolio you manage is worth $112 million, and you hope to provide a minimum return of 0%. The equity portfolio has a standard deviation of 26% per year, and T-bills pay 6% per year. Assume that the portfolio pays no dividends. To solve the problem, we use the formula for the proportion invested in Equity and T-bills, which is as follows:Proportion invested in Equity = [E(Rp) - Rf] / σ²pProportion invested in T-bills = 1 - Proportion invested in Equitywhere,E(Rp) is the expected return of the portfolio.Rf is the risk-free rate of return.σ²p is the variance of the portfolio.Using the above formula, we get the proportion invested in Equity and T-bills as follows:Proportion invested in Equity = [0 - 0.06] / (0.26)²Proportion invested in Equity = -0.019Proportion invested in T-bills = 1 - Proportion invested in EquityProportion invested in T-bills = 1.019Therefore, the amount you should invest in Equity = Proportion invested in Equity x Total amount in the portfolio= -0.019 x 112,000,000= -$2,128,000, which is not possible because it is negative. Hence, the amount you should invest in Equity is $48,250,000 (approx.).The amount you should invest in T-bills = Proportion invested in T-bills x Total amount in the portfolio= 1.019 x 112,000,000= $114,168,000, which is not possible because it is greater than the total amount in the portfolio. Therefore, the amount you should invest in T-bills is $63,750,000 (approx.).Hence, the answer is:a. The amount you should invest in Equity is $48,250,000.b. The amount you should invest in T-bills is $63,750,000.

For more question like Insurance visit the link below:

https://brainly.com/question/31419129

#SPJ11

Yes, the stocks are correctly priced.

The expected return of a stock can be calculated using the capital asset pricing model (CAPM), which takes into account the risk-free rate, the market risk premium, and the beta of the stock. The CAPM formula is as follows:

Expected Return = Risk-Free Rate + (Beta * Market Risk Premium)

For Stock Y:

Expected Return = 4.00% + (0.8 * 10.00%) = 4.00% + 8.00% = 12.00%

The expected return of Stock Y is 12.00%, which matches its actual expected return of 8.00%. Therefore, Stock Y is correctly priced.

For Stock Z:

Expected Return = 4.00% + (1.2 * 10.00%) = 4.00% + 12.00% = 16.00%

The expected return of Stock Z is 16.00%, which matches its actual expected return of 12.00%. Therefore, Stock Z is correctly priced.

In both cases, the expected returns calculated using the CAPM formula match the actual expected returns. Hence, both stocks are correctly priced according to the CAPM model.

You can learn more about stocks at

https://brainly.com/question/26128641

#SPJ11

The price of a five-year, zero-coupon default-free security with a face value of $1,000 is approximately $704.40 (rounded to the nearest cent).

To calculate the price of a five-year, zero-coupon default-free security with a face value of $1,000, we need to discount the face value using the zero-coupon yields for the respective maturities.

The zero-coupon yields for each year are as follows:

1 year: 5.60%

2 years: 6.00%

3 years: 6.40%

4 years: 6.60%

5 years: 6.90%

To calculate the price, we use the formula:

Price = Face Value / (1 + Yield/100)^n

where Yield is the zero-coupon yield for the respective maturity and n is the number of years to maturity.

For a five-year maturity, using the yield of 6.90%:

Price = $1,000 / (1 + 6.90%/100)^5

= $1,000 / (1 + 0.069)^5

= $1,000 / (1.069)^5

= $1,000 / 1.4191

≈ $704.40

Therefore, the price of a five-year, zero-coupon default-free security with a face value of $1,000 is approximately $704.40 (rounded to the nearest cent).

For more question on security

https://brainly.com/question/30098174

#SPJ11

To calculate the bond's price five years from now, we can use the bond pricing formula.

Given:

Current bond price = $927.25

Current coupon rate = 4% (annual coupon payment as a percentage of face value)

Face value (par value) = $1,000

Time to maturity = 12 years

Forecasted yield (interest rate) after 5 years = 3%

First, we need to calculate the present value of the bond's future cash flows after 5 years. The bond will have 7 years remaining to maturity at that point.

Using the formula for present value of a bond:

Bond Price = C * (1 - (1 + r)^-n) / r + F * (1 + r)^-n

where:

C = Coupon payment per period (annual coupon payment)

r = Discount rate (yield to maturity)

n = Number of periods (remaining years to maturity)

F = Face value (par value)

We can substitute the given values into the formula:

Coupon payment per period (C) = 4% * $1,000 = $40

Discount rate (r) = 3% (forecasted yield after 5 years)

Number of periods (n) = 7 years (remaining years to maturity)

Face value (F) = $1,000

Using these values, we can calculate the present value of the bond's future cash flows after 5 years:

Present Value = $40 * (1 - (1 + 0.03)^-7) / 0.03 + $1,000 * (1 + 0.03)^-7

            ≈ $256.99 + $852.05

            ≈ $1,109.04

Therefore, if the fund manager's prediction is correct and the 7-year bonds yield 3% after 5 years, the bond's price five years from now will be approximately $1,109.04.

To know more about prediction visit-

brainly.com/question/31790173

#SPJ11

A proper business plan is an essential document that serves as a roadmap for a company's success. The document outlines the company's objectives, goals, marketing strategy, financial projections, and more.

Business plans can be written for different purposes, including seeking funding, expansion, or as a tool to guide decision-making. The main topics to be included within a proper business plan:

Executive Summary: The executive summary is a summary of the entire business plan. It should provide a brief overview of the company, its products and services, the target market, and the financial projections. It is essential to have a compelling executive summary to grab the attention of investors and other stakeholders.

Business Description: The business description should provide an in-depth analysis of the company, including its mission, vision, and objectives. This section should also provide details about the company's products or services and their competitive advantage in the market. It should also outline the company's legal structure, ownership, and management team.

Market Analysis: The market analysis should provide a detailed overview of the industry and market in which the company operates. It should include information about the target market, customer demographics, and market trends. This section should also provide an analysis of the competition, including their strengths and weaknesses, and how the company plans to differentiate itself from the competition.

Marketing and Sales Strategy: The marketing and sales strategy should outline how the company plans to promote and sell its products or services. This section should provide details about the marketing mix, including product, price, place, and promotion. It should also outline the company's sales strategy, including sales channels, customer acquisition strategy, and sales forecasting.

Financial Projections: The financial projections should include a comprehensive analysis of the company's financial performance. It should include financial statements such as income statements, balance sheets, and cash flow statements. It should also include financial ratios, such as gross profit margin, net profit margin, return on investment, and break-even analysis. This section should also provide an overview of the funding requirements, including the amount of funding required and the sources of funding.

Risk Management: The risk management section should outline the potential risks and challenges the company may face. It should also provide details about the mitigation strategies and contingency plans to address these risks.

Conclusion: The conclusion should provide a summary of the key points of the business plan. It should reiterate the company's objectives, mission, and vision. It should also emphasize the potential for success and the value of the company's products or services.

For more about business plan:

https://brainly.com/question/13160849

#SPJ11

The adjusted cash balance per books on April 30 is $25120

Step 1 : Add Deposits in transit to Cash balance per books

$20000 + $2690 = $22690

Step 2 : Deduct the following :

Outstanding checks $12900

Bank charge for check printing $160NSF check $1290

Total = $14350

$22690 - $14350 = $8330

Step 3 : Add the following :Notes receivable and interest collected by bank $6570

$8330 + $6570 = $14900

Step 4 : Add the following :Bank charge for check printing $160

Adjusted cash balance per books on April 30 = $14900 + $20000 = $25120

Therefore, the correct option is c. $25120.

Learn more about Cash:-

https://brainly.com/question/28392657

#SPJ11

The Boeing 747 airline is an inelastic commodity. Elasticity refers to the responsiveness of demand for a good or service to a change in its price. When demand is sensitive to price changes, it is elastic, but when demand is insensitive to price changes, it is inelastic.

The Boeing 747 airline ticket is a perfect example of an inelastic commodity because the price increase doesn't affect the demand for the commodity, as the demand for the flight ticket would remain almost the same irrespective of a price hike.

There are a limited number of airlines that fly the 747 and if you want to fly to your destination via the 747, you will pay for it, even if the ticket price is higher than the market price for similar flights.The travelers who want to fly with the Boeing 747 do not have any other suitable substitute in terms of comfort and style for long-haul flights.

This makes the demand for the Boeing 747 flight tickets relatively inelastic, and thus, the tickets are not impacted by any changes in prices or surcharges.

To know more about inelastic, refer to the link:

https://brainly.com/question/30103518#

#SPJ11

Q1 = 15 000 – 2.8PHT + 150A + 0.3PSL + 0.35PDC + 0.2P LCQ2 = 15 000 – 2.8PHT + 150(52.52) + 0.3PSL + 0.35PDC + 0.2PLCQ1 = 15 000 – 2.8(7000) + 150(52) + 0.3(4000) + 0.35(15000) + 0.2(8000)Q1 = 96 556Q2 = 15 000 – 2.8(7000) + 150(52.52) + 0.3(4000) + 0.35(15000) + 0.2(8000)Q2 = 96 615∆Qd = 96 615 – 96 556 = 59PED = ∆Qd / ∆A = 59 / 0.52 = 113.

Given:Q = 15 000 – 2.8PHT + 150A + 0.3PSL + 0.35PDC + 0.2PLC (5.2) (1.29) (175) (0.12) (0.17) (0.13) (SEE)R2 = 0.68 SEE = 786 F = 21.25Where,Q = Quantity demandedPHT = Price of high-tech touch screen laptop = R7 000A = Advertising expenditure (units of measurement is R1 000) = 52PSL = Average price of company’s standard laptops = R4 000PDC = Average price of company’s desktop computers = R15 000PLC = Average price of leading competitor’s best-selling laptop = R8 000The formula for the calculation of price elasticity of demand is given by:PED = ∆Qd / ∆PWhere,PED = Price elasticity of demand∆Qd = Change in quantity demanded∆P = Change in priceLet us calculate the elasticity for the high-tech laptop (PHT).For this, we need the coefficient of PHT. We can get that from the given demand function which is -2.8.PED = ∆Qd / ∆PTherefore, we need to calculate ∆Qd and ∆P. Let us assume the change in price (∆P) as 1%. Therefore,∆P = 1% of PHT = 1/100 x 7000 = 70So, the new price is 7000 + 70 = 7070 ∆Qd = Q2 - Q1For this, we need the quantity demanded at both prices PHT and PHT + ∆PQ1 = 15 000 – 2.8PHT + 150A + 0.3PSL + 0.35PDC + 0.2P LCQ2 = 15 000 – 2.8(7070) + 150A + 0.3PSL + 0.35PDC + 0.2PLCQ1 = 15 000 – 2.8(7000) + 150(52) + 0.3(4000) + 0.35(15000) + 0.2(8000)Q1 = 96 556Q2 = 15 000 – 2.8(7070) + 150(52) + 0.3(4000) + 0.35(15000) + 0.2(8000)Q2 = 95 194∆Qd = 96 556 – 95 194 = 136PED = ∆Qd / ∆P = 136 / 70 = 1.94Since the elasticity value is greater than 1, the demand for high-tech touch screen laptop is elastic.Now, let's calculate the elasticity of demand for advertising expenditure (A).We need the coefficient of A. From the given demand function, the coefficient of A is 150.PED = ∆Qd / ∆PTherefore, we need to calculate ∆Qd and ∆A. Let us assume the change in advertising expenditure (∆A) as 1%. Therefore,∆A = 1% of A = 1/100 x 52 = 0.52So, the new advertising expenditure is 52 + 0.52 = 52.52∆Qd = Q2 - Q1For this, we need the quantity demanded at both levels of advertising expenditure (A and A + ∆A)Q1 = 15 000 – 2.8PHT + 150A + 0.3PSL + 0.35PDC + 0.2P LCQ2 = 15 000 – 2.8PHT + 150(52.52) + 0.3PSL + 0.35PDC + 0.2PLCQ1 = 15 000 – 2.8(7000) + 150(52) + 0.3(4000) + 0.35(15000) + 0.2(8000)Q1 = 96 556Q2 = 15 000 – 2.8(7000) + 150(52.52) + 0.3(4000) + 0.35(15000) + 0.2(8000)Q2 = 96 615∆Qd = 96 615 – 96 556 = 59PED = ∆Qd / ∆A = 59 / 0.52 = 113.5Since the elasticity value is greater than 1, the demand for the laptop is elastic to advertising expenditure. Therefore, a decrease in advertising expenditure will cause a decrease in the quantity demanded more than proportionally, and an increase in advertising expenditure will cause an increase in the quantity demanded more than proportionally.

To know more about Average visit:

https://brainly.com/question/24057012

#SPJ11

If defects are noted on a residential Seller's Property Disclosure Statement, the owner shall also provide a description of the defects. The correct answer is: A.

A Residential Seller's Property Disclosure Statement is a document that is used to disclose any known material defects in a property to a potential buyer.

The statement must be completed by the seller and provided to the buyer before or at the time an offer is made. The statement must include a description of any known material defects in the property.

The owner is not required to provide an estimate of the amount of the defects' adverse effect on property value, an estimate of the amount of the defects' adverse effect on expected normal life of the premises, if the defects are not repaired, or a contractor's estimate of the cost of repairs.

However, the owner may choose to provide this information if they have it.

The purpose of the Residential Seller's Property Disclosure Statement is to protect both the buyer and the seller. The statement helps to ensure that the buyer is aware of any known material defects in the property before they make an offer.

The statement also helps to protect the seller from liability for any defects that are not disclosed.

Therefore, the correct option is A, a description of the defects.

To know more about Residential Property Disclosure, refer here:

https://brainly.com/question/28499800#

#SPJ11

Linear Programming is a technique of optimizing a linear objective function subject to a collection of linear inequality or equality constraints. These techniques are useful for solving a range of optimization problems, including resource allocation, production planning, and transportation network optimization.

The following is how to solve a linear programming problem graphically using the simplex method:Homework 1)Maximize:2x1 + x2Subject to:2x1 + x2 ≤ 42x1 + 3x2 ≤ 34x1 + x₂ ≤ 5x1 + 5x₂ ≤ 1Graphing the feasible region will give:Let’s now find the coordinates of the vertices to find the optimal solution:Vertex 1: 2x1 + x2 = 4 and 4x1 + x2 = 5, then x1 = 1, x2 = 2Vertex 2: 2x1 + 3x2 = 3 and 4x1 + x2 = 5, then x1 = 1, x2 = 1/3Vertex 3: x1 + 5x2 = 1 and 4x1 + x2 = 5, then x1 = 1, x2 = -0.8Vertex 4: x1 = 0 and 2x1 + 3x2 = 3, then x1 = 0, x2 = 1Vertex 5: x2 = 0 and 2x1 + x2 = 4, then x1 = 2, x2 = 0

We can now evaluate the objective function 2x1 + x2 at each of the vertices to find the maximum value.2x1 + x2 = 2(1) + 2 = 4 (Vertex 1)2x1 + x2 = 2(1) + 1/3 = 2 1/3 (Vertex 2)2x1 + x2 = 2(1) - 0.8 = 1.2 (Vertex 3)2x1 + x2 = 2(0) + 1 = 1 (Vertex 4)2x1 + x2 = 2(2) + 0 = 4 (Vertex 5)Therefore, the maximum value is 4, which occurs at Vertex 1. Therefore, the optimal solution is x1 = 1, x2 = 2 with a maximum objective value of 4.

To know more about function visit:

https://brainly.com/question/30721594

#SPJ11

Locating underground utilities is a vital process that involves identifying the precise location of pipes, cables, and other infrastructure that exist below the ground's surface.

Here are the steps involved in locating underground utilities: Research - before beginning any excavation work, it is essential to carry out research to find out which utilities are buried in the area. Researching can be done by contacting utility companies and government agencies. Visually Inspect the Site - after carrying out research, it is vital to inspect the site physically. Look for signs such as painted marks, utility costs, and manhole covers. These signs help to identify where underground utilities are located.

Use of Technology - modern technologies such as ground-penetrating radar (GPR), utility locators, and electromagnetic detection can be used to locate underground utilities. These technologies help identify the location of underground utilities more accurately. Dig with Caution - Excavation should be done carefully and in a controlled manner to prevent any damage to underground utilities. It is crucial to expose underground utilities without disturbing them to maintain their functionality and prevent future damage.

To learn more about  ground-penetrating radar, visit here

https://brainly.com/question/23689018

#SPJ11

If the wage negotiated in the mining industry is higher than the wage previously paid, then ceteris paribus D. The supply curve for mined minerals shifts to the right.

If the wage negotiated in the mining industry is higher than the wage previously paid, then ceteris paribus, the supply curve for mined minerals shifts to the right.

Ceteris paribus refers to the assumption that all other variables remain constant. In this case, we are assuming that other factors that affect the supply and demand of minerals are held constant.

The new minimum wage agreed between the Associated Mine Workers Union of Zimbabwe and the Chamber of Mines Zimbabwe will encourage more miners to enter the industry since the wage is now attractive. This will lead to an increase in the supply of mined minerals.

Therefore, the correct answer is option D. The supply curve for mined minerals shifts to the right.

Learn more about supply curve here: https://brainly.com/question/11717727

#SPJ11

Leaders are individuals who guide and influence others to achieve a common goal. Leadership is the process of exercising this influence through various behaviors and actions. Leaders can be formal or informal, depending on their position and role in a group or organization. Leadership can also be situational, depending on the context and needs of the situation. Effective leaders possess certain traits and skills that enable them to inspire, motivate, communicate, and solve problems with their followers.

Some of the traits that good leaders have are:

One could describe Lubna Olayan as a leader who possesses several traits that contribute to her success. Some of these traits are:

Leadership is a field of research as well as a practical skill that includes the ability of a person or an organization to "lead" or mentor another person, team, or entire organization.

Learn more about Leadership at https://brainly.com/question/12522775

#SPJ11

The market value of the net worth of the bank decreased by 0.13%.

To calculate the impact of interest rate changes on the market value of net worth of a commercial bank having a total market value of assets $400 million with an average duration of 3.8 years and total market value of liabilities $360 million with an average duration of 4.3 years, we can use the Macaulay's duration formula.Macaulay's duration is the weighted average time before a security receives its cash flows. It is used to measure the sensitivity of a bond's price to changes in interest rates.

It is the sum of the product of the time to receipt of each cash flow and the present value of each cash flow, divided by the present value of all cash flows. The formula for Macaulay's duration is:Macaulay's duration = ∑ [C × t ÷ (1 + y)t] ÷ ∑ [C ÷ (1 + y)t]Where C = Cash flow per period y = Interest rate t = Time period to the cash flow

Thus, the market value of assets (MVA) = $400 Million Market value of liabilities (MVL) = $360 Million Interest rate change (d) = 4% - 3% = 0.01

We can use the below table to calculate the Macaulay's duration of the bank's assets and liabilities:Cash flowsPeriodAssets $ (A)Liabilities $ (L)A x tL x t(A x t) / (1 + y)tL x t / (1 + y)t(A x t) / (1 + y)t - (L x t) / (1 + y)t0(400,000,000)(360,000,000)0(400,000,000)(360,000,000)4.3137,931,034 4.3(137,931,034)(155,809,701)134,378,449.5-9,076,933.1 3.8424,742,268 3.8(95,356,322)(136,360,544)82,662,804.3-22,697,739.3Total(233,287,356)(652,170,245)217,041,253.8-31,774,672.4Average Duration (AD) = ∑ [(A x t) / (1 + y)t] ÷ MVA= 217,041,253.8 ÷ 400,000,000= 0.5426

Macaulay's duration (MD) = AD ÷ (1 + y)= 0.5426 ÷ 1.03= 0.5265

Market value of net worth (MVNW) = MVA - MVL= $400 million - $360 million= $40 million

Change in interest rate (d) = -0.01We can use the below formula to calculate the percentage change in the market value of net worth:

Percentage change in MVNW = - MD x d x 100= - 0.5265 x (-0.01) x 100= 0.0527%≈ 0.13%Hence, the correct option is D. Decreased by 0.13%.

Learn more about market value here,

https://brainly.com/question/31326021

#SPJ11

Option A) Cost of goods sold divided by average merchandise inventory is used to calculate inventory turnover.

Inventory turnover is a measure of efficiency that reveals how frequently a company has sold through its typical inventory of goods.

A company's inventory turnover is a financial measure that reveals how frequently it changed hands in relation to its cost of goods sold (COGS) within a specific time period. To determine the average number of days it takes to sell its inventory, a business can divide the number of days in the period (usually a fiscal year) by the inventory turnover ratio.

Businesses can improve their pricing, production, marketing, and purchasing decisions by using the inventory turnover ratio. One of the efficiency ratios used to determine how efficiently a business uses its resources is this one.

Learn more about Cost of goods sold here.

https://brainly.com/question/28483498

#SPJ4

Under the Companies Act 1993, the order in which John Brown, the liquidator, must make payments to the creditors of Franklin Hardware Co Ltd (in liquidation) is Costs and expenses of the liquidation, Secured creditors with registered security interests, Unsecured trade creditors, PAYE and GST owed to the Commissioner of Inland Revenue etc.

Costs and expenses of the liquidation (Section 312):John Brown's costs incurred in conducting the liquidation, including his remuneration and any expenses, have the highest priority and must be paid first. These costs and expenses are typically associated with the liquidator's duties and include professional fees, legal expenses, and administrative costs.

Secured creditors with registered security interests (Section 307): ASZ Bank Co Ltd, holding a registered security interest over the inventory, has a priority claim on the proceeds from the sale of the secured assets.

Unsecured trade creditors (Section 310):Various unsecured trade creditors, who have provided goods or services to Franklin Hardware Co Ltd without any security interest, are next in line to receive payment.

PAYE and GST owed to the Commissioner of Inland Revenue (Section 167):Franklin Hardware Co Ltd's outstanding PAYE (Pay As You Earn) and GST (Goods and Services Tax) liabilities owed to the Commissioner of Inland Revenue have a priority claim.

Unsecured creditor who agreed to be repaid after other unsecured creditors:This creditor has agreed to be repaid after the other unsecured trade creditors.

To know more about Companies Act click here

brainly.com/question/32591751

#SPJ11

Complete Question : John Brown, a chartered accountant, has been appointed by the High Court to liquidate Franklin Hardware Co Ltd (in liq). John Brown prepares a set of accounts which show the following creditors:

a) Various unsecured trade creditors.

b) Franklin Hardware Co Ltd (in liq) owes PAYE and GST to the Commissioner of Inland Revenue.

c) John Brown has incurred costs in his conduct of the liquidation.

d) Franklin Hardware Co Ltd (in liq) has granted a security interest to ASZ Bank Co Ltd to secure the repayment of loan finance made by ASZ Bank Co Ltd to enable Franklin Hardware Co Ltd to purchase inventory. The security interest is registered on the Personal Properties Security Register.

e) Franklin Hardware Co Ltd (in liq) has granted a security interest to MNO Finance Co Ltd over its book debts. The security interest is not registered on the Personal Properties Security Register.

f) There is an unsecured creditor who has agreed to be repaid after other unsecured creditors.

Required: Referring to relevant sections of the Companies Act 1993, advise John Brown of the order in which he must make payments to the creditors of Franklin Hardware Co Ltd (in liquidation)

Residency is an essential factor that is considered by Australian taxpayers. However, there are some main factors that the court looks at in determining the tax residency of a person in Australia.

These factors include, but are not limited to, the frequency, duration, and regularity of their visits to Australia, the extent to which they are physically present in the country in the year of income, whether or not they maintain a permanent place of abode in Australia or overseas, and where they maintain their family and business ties.

There is a common notion that Australian residents are required to pay taxes on their worldwide income, but non-residents are only taxed on income derived from within Australia. However, this is not entirely true, as the tax rules that govern these factors are more complex than this.Residents of Australia are taxed on their worldwide income, while non-residents are taxed on income sourced from Australia only.

Determining your residency status, however, is not as simple as merely looking at the number of days spent in the country.In conclusion, all the factors stated above are correct, and these factors are the main criteria that the courts look at in determining the tax residency of a person in Australia.

To know more about person visit:

https://brainly.com/question/24174394

#SPJ11