To determine the proton's speed when it reaches the negative plate, we can utilize the relationship between electric field, force, and acceleration.
The force experienced by a charged particle in an electric field is given by the equation F = qE, where F is the force, q is the charge of the particle, and E is the electric field strength. In this case, the proton has a charge of +e (1.6 × 10⁻¹⁹ C) and experiences a force in the direction of the electric field.
Using Newton's second law, F = ma, we can relate the force to the proton's acceleration (a) and mass (m). Since the proton is released from rest, its initial velocity (v₀) is zero. The distance traveled by the proton (d) is equal to the spacing of the parallel plates, which is 2.30 mm (2.30 × 10⁻³ m).
The force on the proton is F = qE = (1.6 × 10⁻¹⁹ C) × (5.50×10⁴ N/C) = 8.80 × 10⁻¹⁵ N. By equating the force to mass times acceleration, we have ma = 8.80 × 10⁻¹⁵ N.
Rearranging the equation to solve for acceleration, we get a = (8.80 × 10⁻¹⁵ N) / (m). The mass of a proton is approximately 1.67 × 10⁻²⁷ kg.
Substituting the values, we find the acceleration of the proton. Using the kinematic equation v² = v₀² + 2ad, we can find the final velocity (v) of the proton when it reaches the negative plate.
Since the initial velocity (v₀) is zero and the distance (d) is known, we can solve for the final velocity. Calculating the expression gives us the speed of the proton when it reaches the negative plate.
Learn more about Using Newton's second law here:
https://brainly.com/question/28261773
#SPJ11
a thin-walled, hollow sphere of mass m and radius r is free to rotate around a vertical shaft that passes through the center of the sphere. initially, the sphere is at rest. a small ball of clay of the same mass m moving horizontally at speed v grazes the surface of the sphere at its equator. after grazing the surface, the ball of clay is moving at speed v/2 . what is the angular momentum of the ball of clay about the shaft before it grazes the surface? express your answer in terms of the variables
The angular momentum of the ball of clay before grazing the surface is (2/3)mrv.
What is the angular momentum of the sphere?The angular momentum of the ball of clay about the shaft before it grazes the surface is calculated as follows;
Moment of inertia of the ball;
I = (2/3) mr²
where;
m is the mass of the spherer is its radius.Angular velocity is given as;
ω = v / r
where;
v is linear velocityr is the radiusThe angular momentum of the ball of clay before grazing the surface is calculated as;
L = Iω
L = (2/3)mr² x (v / r)
L = (2/3)mrv
Learn more about angular momentum here: https://brainly.com/question/7538238
#SPJ4
Air containing 0.06% carbon dioxide is pumped into a room whose volume is 300 m3. The air is pumped in at a rate of 60 m3/min, and the circulated air is then pumped out at the same rate. If there is an initial concentration of 0.2% carbon dioxide, determine the subsequent amount A(t), in mº, in the room at time t.
The subsequent amount A(t), in mº, in the room at time t is A(t) = (0.0006 * 60 - 0.002 * 60) * t = (-0.00084) * t
To determine the subsequent amount A(t) of carbon dioxide in the room at time t, we can use the formula A(t) = (C_in * V_in - C_out * V_out) * t, where C_in is the initial concentration of carbon dioxide, V_in is the volume of air pumped into the room per unit of time, C_out is the concentration of carbon dioxide in the circulated air, V_out is the volume of air pumped out of the room per unit of time, and t is the time in minutes.
Given the values C_in = 0.2%, V_in = 60 m³/min, C_out = 0.06%, V_out = 60 m³/min, and t is the desired time, we can substitute these values into the formula to calculate the subsequent amount of carbon dioxide in the room at time t.
Substituting the given values, we have A(t) = (0.0006 * 60 - 0.002 * 60) * t = (-0.00084) * t. Since the coefficient of t is negative, it indicates that the subsequent amount of carbon dioxide in the room will decrease over time.
Learn more about carbon dioxide: https://brainly.com/question/1457431
#SPJ11
A 60-Hz 220-V-rms source supplies power to a load consisting of a resistance in series with an inductance. The real power is 1500 W, and the apparent power is 3400 VA. Part A Determine the value of the resistance. Express your answer to three significant figures and include the appropriate units. НА ? R= Value Omega Submit Request Answer Part B Determine the value of the inductance. Express your answer to three significant figures and include the appropriate units. ЦА ?
Part A: The value of the resistance is approximately 43.9 Ω.
Part B: The value of the inductance is approximately 0.82 H.
Find the value of resistance and inductance?To determine the resistance and inductance, we'll use the formulas for real power (P), apparent power (S), and power factor (PF).
Given that the real power is 1500 W and the apparent power is 3400 VA, we can write:
P = 1500 W
S = 3400 VA
The power factor (PF) is the ratio of real power to apparent power:
PF = P / S
We know that the power factor is equal to the cosine of the angle between the voltage and current phasors. Since the load is purely resistive and inductive, the power factor can be expressed as:
PF = cos(θ) = R / Z
where R is the resistance and Z is the impedance.
The impedance (Z) can be calculated using the formula:
Z = S / (2πf)
where f is the frequency of the source.
Given that the frequency is 60 Hz, we can substitute the values:
Z = 3400 VA / (2π × 60 Hz)
Now, we can substitute the power factor equation into the impedance equation:
R / Z = PF
R = Z × PF
Substituting the values of Z and PF, we get:
R = (3400 VA / (2π × 60 Hz)) × (1500 W / 3400 VA)
Simplifying the expression:
R ≈ 43.9 Ω
For Part B, we need to find the inductance (L). The impedance can be expressed as:
Z = √(R² + Xₗ²)
where Xₗ is the reactance due to inductance.
Since the load is inductive, we can write the reactance as:
Xₗ = Z × sin(θ)
Substituting the values of Z and PF:
Xₗ = Z × √(1 - PF²)
Using the given values, we can calculate Xₗ:
Xₗ = (3400 VA / (2π × 60 Hz)) × √(1 - (1500 W / 3400 VA)²)
Simplifying the expression:
Xₗ ≈ 30.4 Ω
The reactance due to inductance can be written as:
Xₗ = 2πfL
Solving for L:
L = Xₗ / (2πf)
Substituting the values:
L = 30.4 Ω / (2π × 60 Hz)
Calculating the value:
L ≈ 0.82 H
Therefore, Part A: The resistance in the load is approximately 43.9 Ω.
Part B: The inductance in the load is approximately 0.82 H.
To know more about resistance, refer here:
https://brainly.com/question/14547003#
#SPJ4
If the angle of incidence is 35 degree, what is the angle of reflection?
Answer:
35
Explanation:
angle of incidence equals angle of reflection
X rays with a wavelength of 0.085nm diffract from a crystal in which the spacing between atomic planes is 0.213 nm .
Part A
How many diffraction orders are observed?
ANSWER:
N =
X rays with a wavelength of 0.085nm diffract from a crystal in which the spacing between atomic planes is 0.213 nm . The number of diffraction orders observed is N = 4.
In X-ray diffraction, the diffraction pattern is produced when X-rays interact with the crystal lattice. The number of diffraction orders observed can be determined using Bragg's law:
nλ = 2d sinθ
where n is the diffraction order, λ is the wavelength of the X-rays, d is the spacing between atomic planes, and θ is the angle of incidence.
Rearranging the equation, we have:
n = 2d sinθ / λ
Substituting the given values, d = 0.213 nm and λ = 0.085 nm, we can calculate the value of n.
n = 2 * 0.213 nm * sinθ / 0.085 nm
Simplifying the expression, we find:
n ≈ 4
Therefore, the number of diffraction orders observed is N = 4.
When X-rays with a wavelength of 0.085 nm diffract from a crystal with a spacing between atomic planes of 0.213 nm, four diffraction orders are observed.
To know more about Diffraction, visit
https://brainly.com/question/8645206
#SPJ11
f astronauts wished to determine whether a microscopic extraterrestrial object was alive, which feature would they not look for?
If astronauts wished to determine whether a microscopic extraterrestrial object was alive, one feature they would not look for is cellular structure.
Cellular structure, including cells and their organization, is a defining characteristic of life on Earth. However, when examining microscopic extraterrestrial objects, it may not be appropriate to expect the presence of cellular structures similar to those found in terrestrial life forms.
Instead, astronauts would focus on other features that are indicative of life, such as metabolic activity, reproduction, response to stimuli, or the presence of organic molecules. These features are fundamental to the definition of life and can provide evidence of biological processes or signs of life even in microscopic extraterrestrial objects that do not possess cellular structures as we know them.
Therefore, while cellular structure is a key feature of life on Earth, it may not be applicable or present in the same way when examining potential extraterrestrial life forms.
To learn more about astronauts click here
https://brainly.com/question/29585275
#SPJ11
Mass of trolley (m):
(1)
0,9
kg
Mass
m xa
Acceleration
(a)
(mos)
Applied
Force (N)
0
4,04
O112
Tabulate your measurements in the table below.
At from A to B (s)
Average
Kg
At (s)
1
2
3
Hanger only
4,07 4,00
HOS
Hanger +
1 mass piece
10
3,09
3,04 3,10
3,14
Hanger +
2 mass pieces
ao
2,00
Hanger +
3 mass pieces 30
1196
1,91
Hanger +
4 mass pieces
168 1,69 1,TO 1,69
(5)
0,21
2,1 x 103 0, 098
O #4
8,8X10
2,22 2,14
0, 196
01 SS
0102
o zau
0103
01392
0/ 70
(5)
(5)
QUESTIONS AND ANALYSIS
1.
In this experiment identify the...
1.1
independent variable
(1)
1.2 dependent variable
3 E
1.3
controlled variable
Ар со
2.
3
Describe how the effect of friction was minimised in the experiment.
(1)
Use the recorded data to plot a graph that will show the relationship
between the acceleration and the applied force on the trolley. Use a (8)
graph paper.
Ilse the cranh to determine the mass of the trolley.
(4)
Answer:
ij
Explanation:
The Brazilian rain forest is an area with significant biodiversity.
As the rain forest is replaced with agricultural land, it is
reasonable to predict a reduction in -
consumption of solar energy.
sustainability over time.
precipitation levels.
average daily temperature.
Answer:
sustainability over time.
Explanation:
The largest Brazilian rainforest is the Amazon rainforest, which is the largest rainforest in the world and occupies 42% of the Brazilian territory. The forest is composed of a rich environmental diversity, constituted by many species of fauna and flora and diverse river resources.
However, there is a growing transformation in the Amazon rainforest caused by organizational exploitation that uses its resources to transform the forest area into agricultural land and pastures for livestock. This problem will cause a reduction in sustainability over time, which will cause serious negative effects on the environment, such as a reduction in biodiversity and an increase in the emission of gases responsible for the greenhouse effect on the planet.
Answer:
Bb
Explanation:
how many oxygen atoms are there in the products of this equation: C6H12O6+6O2 ➪6CO2+6H2O+energy?
what is the magnitude of the electric force on an electron in a uniform electric field of strength 2270 n/c that points due east?
The magnitude of the electric force on the electron is approximately 3.632 × 10^-16 N. Note that the negative sign indicates that the force is in the opposite direction of the electric field (westward in this case).
The magnitude of the electric force (F) on an electron in a uniform electric field can be calculated using the formula:
F = q * E,
where q is the charge of the electron and E is the electric field strength.
The charge of an electron is approximately -1.6 × 10^-19 C (negative because it is an electron).
Given that the electric field strength is 2270 N/C and it points due east, we can substitute the values into the formula:
F = (-1.6 × 10^-19 C) * (2270 N/C) ≈ -3.632 × 10^-16 N.
The magnitude of the electric force on the electron is approximately 3.632 × 10^-16 N. Note that the negative sign indicates that the force is in the opposite direction of the electric field (westward in this case).
To learn more about Electric force click here
https://brainly.com/question/20935307
#SPJ11
emotional management is to: prevent, control, redirect, and change. true false
The given statement '' Emotional management is to: prevent, control, redirect, and change '' is True.
True. Emotional management involves various strategies to prevent, control, redirect, and change emotions.
It includes techniques and practices aimed at understanding, regulating, and effectively dealing with emotions in a healthy and productive manner.
By implementing these strategies, individuals can enhance their emotional well-being and improve their ability to cope with different situations.
Hence, The given statement '' Emotional management is to: prevent, control, redirect, and change '' is True.
To know more about Emotional here
https://brainly.com/question/30750392
#SPJ4
What is number 5?! I’m so confused.
Answer:
i think it's A
Explanation:
Answer:
The answer is A
Explanation:
find the torque when the work done to more through an angel of 1/4π radians is 3j
Answer:
The torque is approximately 3.82 N·m
Explanation:
The relationship between work done, 'W', and the applied torque, 'τ' can be presented as follows;
W = τ × Δθ
Where;
W = The work done by the torque
τ = The magnitude of the torque
Δθ = The angle through which the object is turned
The parameters for 'W' and 'Δθ' are;
W = 3j
Δθ = 1/4 × π
From W = τ × Δθ, we have;
τ = W/Δθ
∴ τ = 3j/(1/4 × π) ≈ 3.81971863421 N·m
The torque, τ ≈ 3.82 N·m
Describe how seismic waves can be used to determine the location of petroleum far beneath the surface.
Answer: The seismic waves are useful for the oil and gas exploration beneath the earth crust.
Explanation:
The seismic waves are sent beneath the earth crust to determine the location of fossil fuels like petrol, and natural gas. These seismic waves bound back and their pattern of reflection and refraction is recorded by using a receiver that is a geophone or can be a hydrophone (in water). The seismic waves bounce back indicating towards the reservoir of fossil fuel exhibit a characteristic pattern that can help in tracing the location of the fossil fuel.
An electron moves left to right in the plane of the page when it enters a magnetic field going into the page. The acceleration of the electron is
A- up
B- down
C- direction of motion
D- opposite direction of motion
E- into page
F- out of page
The required correct answer would be either A (up) or B (down), depending on the specific configuration of the magnetic field and the motion of the electron.
The direction of the acceleration of the electron depends on the interaction between the magnetic field and the motion of the electron. According to the right-hand rule for magnetic fields, the direction of the acceleration can be determined as follows:
Extend the right hand with the thumb pointing in the direction of the electron's velocity (left to right).
Curl the fingers of the right hand in the direction of the magnetic field (into the page).
The direction in which the palm of the hand faces indicates the direction of the acceleration.
Using this right-hand rule, we can determine that the acceleration of the electron will be perpendicular to both the velocity and the magnetic field. Therefore, the acceleration will be either up or down, depending on the specific orientation of the magnetic field and the motion of the electron.
Given the options provided, the correct answer would be either A (up) or B (down), depending on the specific configuration of the magnetic field and the motion of the electron.
Learn more about magnetic fields here:
https://brainly.com/question/14848188
#SPJ4
a student is observing an object of unknown mass that is oscillating horizontally at the end of an ideal spring. The student measure the object's period of oscillation with a stopwatch. While the object is continuously oscillating, the student determines the maximum speed of the object during two oscillations. The first speed is 3.5 m/s and the second speed is 2.7 m/s. Which of the following could account for the decrease in the object's maximum kinetic energy?a. Meterstick
b. Motion sensor
c. Balance
d. Photogate
The following could account for the decrease in the object's maximum kinetic energy: Balance. The correct option is C.
The decrease in the object's maximum kinetic energy could be accounted for by using a balance. A balance is a device used to measure mass, and it is not directly related to the object's kinetic energy. The balance measures the gravitational force acting on the object, which remains constant as long as the mass of the object does not change.
The decrease in the object's maximum kinetic energy during oscillation is likely due to the presence of external factors such as air resistance or friction. These factors can cause energy loss in the system, leading to a decrease in the object's maximum kinetic energy over time.
On the other hand, options a (meterstick), b (motion sensor), and d (photogate) are measurement tools that do not directly affect the object's kinetic energy.
A meterstick is used for measuring length, a motion sensor is used to detect motion, and a photogate is used to measure the time it takes for an object to pass through a gate. These tools do not account for the decrease in kinetic energy observed in the object during oscillation. The correct option is C.
To know more about kinetic energy, refer here:
https://brainly.com/question/22174271#
#SPJ11
Select the correct answer. A car is moving at a constant speed along a straight line. Which statement is true about the forces acting on the car? A. The net force acting on the car from all directions is zero. B. The net force acting on the car is greater than the car's weight. C. The net force acting on the car is in the direction of the car's motion. D. The net force acting on the car is in the opposite direction of the car's motion.
Answer:
i think try theanswer
Explanation:
proper
Answer:
A
Explanation:
For an object to move with constant speed the forward force is opposed by the effects of forces. There is no resultant force acting or constant speed is a result of no resultant force.
Newton's second law states that an object with no net forces acting on it which is initially at rest will remain at rest. If it is moving, it will continue to move in a straight line with constant velocity. Newton's Second Law states: F = ma. F is the net force acting on an object.
Also if velocity or speed is constant the acceleration will be 0 the F=m×0
F=0.
the planet that has the lowest density is _____ while the planet that is tilted 90° to the orbital plane is _____.
The planet that has the lowest density is Saturn, while the planet that is tilted 90° to the orbital plane is Uranus.
Which planet has the least density, and which one is tilted 90° to its orbital plane?Saturn, the second-largest planet in our solar system, has the lowest average density among all the planets. With its famous rings made up of icy particles and rocky debris, Saturn has an average density of about 0.687 grams per cubic centimeter. This low density is primarily due to its composition, which includes a significant amount of hydrogen and helium, making it less dense than water.
On the other hand, Uranus, the seventh planet from the Sun, holds a peculiar distinction in our solar system. It is tilted approximately 98 degrees, which means its axis is almost perpendicular to the plane of its orbit. This extreme tilt causes Uranus to experience dramatic seasonal variations, where one pole faces the Sun continuously for half of its orbit, while the other pole faces prolonged darkness. This unique axial tilt sets Uranus apart from the other planets, making it the planet tilted 90° to its orbital plane.
Learn more about Planet
brainly.com/question/29765555
#SPJ11
Fill in the blanks with suitable pronouns.
1. Baby bird learns to fly
2. The two line intersect _______ at the middle position.
3. ______ had the courage to stand against the unjust treatment to the poor.
4. _______ is on the line?
5. smitha works in a gym ____ is my trainer
1)Baby bird cannot fly. Their mother has to feed \bf\underline{them}them
2. Vijay likes riding my bicycle. I sometimes lend \bf\underline{it}it to \bf\underline{him}him
3. Sooraj and I are brothers. \bf\underline{we\:both}weboth share the same bedroom.
4. Ravina isn't well. Dad is taking to the doctor. (No personal pronouns required)
5. My sister is a teacher. \bf\underline{She}She teaches Maths.The properties of being
a. clear and bright
b. useful and profitable
make a diamond a gemstone.
c. easy to obtain and beautiful
d. colorful and profitable
Answer:
D !!!
Explanation:
Answer:
D
Explanation:
(a) An insulating sphere with radiusa has a uniform charge density rho. The sphere isnot centered at the origin but at. Show that the electric field inside thesphere is given by.
(b) An insulating sphere of radius R has a spherical holeof radius a located within its volume and centered adistance b from the center of the sphere. The solid partof the sphere has a uniform volume charge density rho. Findthe magnitude and direction of the electric fieldinside the hole, and show thatis uniform over the entire hole.[Hint: Use the principle of superposition and the resultof part (a).]
a. The electric field is E = (kρa^3/r^2) r
b. The magnitude of the electric field inside the hole of the sphere is (kρa^3/b^2 - kρ(4/3)πa^3/(b^2 - a^2)) j
a)
The electric field inside an insulating sphere with radius a and uniform charge density rho is,
E = (kq/r^2) r
Where
q = volume charge density * volume of the sphere
= rho*(4/3)πa^3
q = (4/3)πa^3ρ
The electric field is:,
E = (kq/r^2) r
= (kρa^3/r^2) r
b)
E = E_solid_sphere - E_hollow_sphere
The electric field due to the charge density inside the hole of the sphere is zero because the sphere is insulating. Therefore, the electric field inside the hole due to the charge density is zero and is uniform over the entire hole.The electric field due to the solid sphere can be found using the result from part (a),E_solid_sphere = (kρa^3/b^2) j
The electric field inside the hole due to the solid sphere is,E_hollow_sphere = -(kρ(4/3)πa^3/(b^2 - a^2)) j
Therefore, the magnitude and direction of the electric field inside the hole of the sphere areE = E_solid_sphere - E_hollow_sphere
= (kρa^3/b^2 - kρ(4/3)πa^3/(b^2 - a^2)) j
Learn more about the electric field:
brainly.com/question/28453368
#SPJ11
an object of mass 100 grams hangs from a long spring. when pulled down 10 cm from its equilibrium position and released from rest, it vibrates with a period of 2 seconds. (a) what is the speed of the object as it passes through the equilibrium position?
Given, Mass of the object, m = 100 grams = 0.1 kg. Therefore, the speed of the object as it passes through the equilibrium position is 0.31 m/s. The answer is 0.31 m/s.
Displacement from the equilibrium position, x = 10 cm = 0.1 m, Time period, T = 2 seconds(a) To find the speed of the object as it passes through the equilibrium position, we need to find its maximum speed. We know that the time period, T = 2π √(m/k)where k is the spring constant of the spring. k = 4π²m/T² = 4π² × 0.1/2² = 0.98 N/m, The force exerted on the object, F = kx = 0.98 × 0.1 = 0.098 N. When the object passes through the equilibrium position, all the potential energy is converted into kinetic energy. Therefore, the kinetic energy at the equilibrium position is K.E = 1/2 mv²where v is the velocity of the object. So, equating the potential energy with kinetic energy,1/2 kx² = 1/2 mv²v = x √(k/m) = 0.1 √(0.98/0.1) = 0.31 m/s.
to know more about displacement visit:
https://brainly.com/question/29957379
#SPJ11
irina is told to use a meter stick to find the length of a room. she makes six independent measurements: 4.402 m, 4.217 m, 4.345 m, 4.925 m, 4.372 m, 4.289 m. how should she report the best estimate of the length of the room? 01
Irina should report the best estimate of the length of the room as 4.425 meters.
Irina should report the best estimate of the length of the room by calculating the average of all the measurements.
The average of the six independent measurements can be found using the formula:
Average = (Sum of measurements) / (Total number of measurements)
Therefore, the average of the six independent measurements can be calculated as follows:
Average =
(4.402 m + 4.217 m + 4.345 m + 4.925 m + 4.372 m + 4.289 m) / 6
= 26.55 / 6= 4.425 m
This is the best estimate of the length of the room because it is the average of all the independent measurements made by Irina.
In science, measurements play a vital role. Scientists use a range of tools to measure things, from simple ruler or meter stick to highly sophisticated equipment. It is crucial for the measurements to be as precise and accurate as possible because any error in the measurement can affect the results of experiments.
To minimize the error in measurement, scientists often make multiple measurements and then report the average of those measurements as the best estimate of the measurement.
This process is known as taking the average, or mean, of the measurements. In the example given above, Irina made six independent measurements of the length of the room using a meter stick. She then calculated the average of those measurements and reported it as the best estimate of the length of the room.
This method is widely used in science to minimize the error in measurement and to ensure that the results of experiments are as accurate as possible.
to know more about Arithmetic mean visit:
https://brainly.com/question/14379074
#SPJ11
the terminals of a 0.70 v watch battery are connected by a 80.0-m-long gold wire with a diameter of 0.100 mm .
A gold wire with a length of 80.0 meters and a diameter of 0.100 millimeters connects the terminals of a 0.70 V watch battery. Therefore, 0.28 Amperes of current are flowing via the gold wire.
To determine the current in the wire, we need to use Ohm's Law, which states that the current (I) flowing through a conductor is equal to the voltage (V) across the conductor divided by its resistance (R):
[tex]\begin{equation}I = \frac{V}{R}[/tex]
First, let's calculate the resistance of the gold wire. The resistance (R) can be determined using the formula:
[tex]\begin{equation}R = \frac{\rho L}{A}[/tex]
where ρ is the resistivity of gold, L is the length of the wire, and A is the cross-sectional area of the wire.
The resistivity of gold (ρ) is approximately 2.44 x 10⁻⁸ Ω·m.
The length of the wire (L) is given as 80.0 m.
To find the cross-sectional area (A) of the wire, we need to convert the diameter (0.100 mm) to meters:
Diameter = 0.100 mm = 0.100 x 10⁻³ m
The cross-sectional area (A) can be calculated using the formula:
[tex]\begin{equation}A = \pi \left(\frac{d}{2}\right)^2[/tex]
[tex]\begin{equation}A = \pi \left(\frac{0.100 \times 10^{-3} \text{m}}{2}\right)^2[/tex]
A = 7.854 x 10⁻¹⁰ m²
Next, we can calculate the resistance (R) using the formula:
[tex]R = \frac{\rho L}{A}[/tex]
where ρ is the resistivity of gold, given as 2.44 x 10⁻⁸ Ω·m, and L is the length of the wire, given as 80.0 m.
[tex]R = \frac{2.44 \times 10^{-8} \Omega \cdot m \times 80.0 m}{7.854 \times 10^{-10} m^2}[/tex]
R = 2.50 Ω
Finally, we can determine the current (I) using Ohm's Law:
[tex]I = \frac{V}{R}[/tex]
Given that the voltage (V) across the wire is 0.70 V, we can substitute the values:
[tex]I = \frac{0.70\,V}{2.50\,\Omega}[/tex]
I = 0.28 A
Therefore, the current flowing through the gold wire is 0.28 Amperes.
To know more about the gold wire refer here :
https://brainly.com/question/17031833#
#SPJ11
Complete question :
The terminals of a 0.70 V watch battery are connected by a 80.0-m-long gold wire with a diameter of 0.100 mm . What is the current in the wire?
A police car is driving north with a siren making a frequency of 1038 hz. Moops is driving north behind the police car at 12 m/s and hard a frequency of 959hz. How fast is the police car going?
Answer:
The police car is moving at 41.24 m/s.
Explanation:
To find the speed of the police car we need to use the Doppler equation:
[tex] f = f_{0}(\frac{v + v_{r}}{v + v_{s}}) [/tex]
Where:
v: is the speed of the sound = 343 m/s
[tex]v_{r}[/tex]: is the speed of the receiver = 12 m/s
[tex]v_{s}[/tex]: is the speed of the source =?
f: is the observed frequency = 959 Hz
f₀: is the emitted frequency = 1038 Hz
Both terms are positive in the fraction because the velocity of the sound is in the opposite direction to both velocities of the police car and the other car.
By solving the above equation for [tex]v_{s}[/tex] we have:
[tex] v_{s} = \frac{f_{0}(v + v_{r})}{f} - v = \frac{1038(343 + 12)}{959} - 343 = 41.24 m/s [/tex]
Therefore, the police car is moving at 41.24 m/s.
I hope it helps you!
What force is keeping the Earth in orbit around the Sun? * HELP FAST PLEASE.
1 point
A Centripetal Force due to gravity.
B Inertia due to gravity.
C Friction due to gravity.
D Magnetic Force due to gravity.
centripetal force acts *
1 point
A in the same direction as tangential speed.
B perpendicular to tangential speed but in the same plane.
C in the direction opposite tangential speed.
D perpendicular to the plane of circular motion.
Answer:
magnetic force due to gravity
Explanation:
nowno that is because that's what the geography teacher taught us back in don't remember but it's true
Now we want to analyze a physical system comprised of two particles. Look at the pair-wise potential energy. Suppose r is equal to 1.2s. a) Suppose the particles are momentarily at rest at r = 1.2s (like a ball at the top of its trajectory when thrown straight up). What can you say about the total energy, Etot, and the subsequent motion of the two particles? b) Now suppose at the instant the particles have the separation 1.2s they have total KE equal to 0.1e. What can you say about the total energy, Etot, and the subsequent motion of the two particles
If the particles are momentarily at rest at a separation of r = 1.2s, the potential energy between them would be at a maximum since they are at the maximum distance apart.
a) If the particles are momentarily at rest at a separation of r = 1.2s, the potential energy between them would be at a maximum since they are at the maximum distance apart. At this point, the kinetic energy of the particles would be zero. The total energy, Etot, of the system, would be equal to the potential energy at that distance. The subsequent motion of the two particles would depend on the specific details of the system, but if no external forces act on them, they would start moving towards each other due to the attractive nature of the potential energy between them.
b) If, at the instant, the particles have a separation of 1.2s, their total kinetic energy (KE) is equal to 0.1e, where "e" represents the total potential energy between them, then the total energy, Etot, of the system would be the sum of the kinetic energy and potential energy. Etot = KE + PE = 0.1e + e = 1.1e. The subsequent motion of the two particles would depend on the specific details of the system and the relative magnitudes of the kinetic and potential energies. If the kinetic energy is significantly smaller than the potential energy, the particles would move towards each other under the influence of the attractive potential energy, eventually reaching a closer separation. However, if the kinetic energy is comparable or larger than the potential energy, the particles may exhibit more complex or oscillatory motion depending on the precise characteristics of the potential energy function.
To learn more about potential energy click here
https://brainly.com/question/24284560
#SPJ11
1. A pump is being used to transport a liquid food product (rho=1000 kg/m3, μ=1.5 cP) from a holding tank to a filling machine at a mass flow rate of 2 kg/s. The liquid level in the holding tank is 10 m above the pump, and the filling machine is 5 m above the pump. There is 100 m of 2-in nominal diameter sanitary pipeline between the holding tank and the filling machine, with one open globe valve and four regular 90 C flanged elbows in the system. The product is being pumped through a heat exchanger with 100 kPa of pressure drop due to friction before filling. Determine the theoretical power requirement for the pump.
The theoretical power requirement for the pump is 97.39 W.
Given Information: Density of the liquid, ρ = 1000 kg/m³, Viscosity of the liquid, μ = 1.5 cP, The mass flow rate of the liquid, m = 2 kg/s, The height difference between the holding tank and the filling machine, H = 10 - 5 = 5 m, Length of the pipeline, L = 100 m, Diameter of the pipeline, d = 2 inches = 0.05 m, Pressure drop due to friction, ∆P = 100 kPa, Number of globe valves, n₁ = 1, Number of regular flanged elbows, n₂ = 4.
We need to determine the theoretical power requirement for the pump.
Theoretical power requirement is given by;
P = mgh + [(ΔP/ρ) × Q] + [(K₁ + K₂) × ρ × g × Q²/2]
Where, P = Power (W), ρ = Density of the liquid (kg/m³), m = Mass flow rate of the liquid (kg/s), g = Acceleration due to gravity (m/s²), h = Height difference between the two points (m), ΔP = Pressure drop due to friction (Pa), L = Length of the pipeline (m), d = Diameter of the pipeline (m), Q = Volumetric flow rate (m³/s), K₁, K₂ = Loss coefficients of the globe valve and regular flanged elbow respectively.
The formula for the volumetric flow rate is given by;
Q = (π/4) × d² × v
Where, v = Velocity of the fluid.
The formula for velocity is given by
v = (4 × m)/(ρ × π × d²)
Now, putting the given values in the above formulas
P = (2 × 9.81 × 5) + [(100000/1000) × (2/0.05²) ] + [(0.45 + 4 × 0.35) × 1000 × 9.81 × (2/(π × 0.05²) )²/2]P = 97.39 W.
To know more about volumetric flow visit:
https://brainly.com/question/32612941
#SPJ11
Convertir:
A. 3Km a m
B. 250 ma Km
C. 1000Cm a m
D. 10000 mm a Cm
Answer:
A. 3,000,000 m
B. 0.25 km
C. 10 m
D. 1,000 cm
Explanation:
no hablo español, así que solo ingrese esto en el traductor de G*ogle
A. One kilometer equals 1000 meters, so
3,000*1,000 = 3,000,000 m
B. One meter equals 0.001 kilometer, so
250*0.001 = 0.25 km
C. One centimeter equals 0.01 meter
1,000*0.01 = 10 m
D. One milimeter equals 0.1 centimer, so
10,000*0.1 = 1,000
Remember that the Sun produces 400 trillion trillion joules per second via the proton-proton chain, and that the Sun has a mass of 2 million trillion trillion kilograms. How many years would the Sun have to shine before one percent of its mass is converted to energy? Your answer should be significant to only one or two digits.
The Sun would have to shine for approximately 2 billion years for one percent of its mass to be converted into energy.
To calculate the time required for the Sun to convert one percent of its mass into energy, we need to determine the total energy the Sun can produce and then calculate the amount of mass that would be converted.
Energy produced per second by the Sun via the proton-proton chain = 400 trillion trillion joules (4 x 10²⁶joules)
Mass of the Sun = 2 million trillion trillion kilograms (2 x 10³⁰ kilograms)
First, we need to calculate the total energy the Sun can produce per year:
Energy produced per year = Energy produced per second × Number of seconds in a year
Number of seconds in a year = 365 days × 24 hours × 60 minutes × 60 seconds
Number of seconds in a year = 31,536,000 seconds
Energy produced per year = 4 x 10²⁶joules/second × 31,536,000 seconds/year
Now, we can calculate the mass that would be converted to energy:
Mass converted to energy per year = Energy produced per year / (Speed of light)²
The speed of light (c) is approximately 3 x 10⁸meters per second.
Mass converted to energy per year = (4 x 10²⁶ joules/second × 31,536,000 seconds/year) / (3 x 10^8 meters/second)²
Now, let's calculate the mass converted to energy as a percentage of the Sun's total mass:
Mass percentage = (Mass converted to energy per year / Mass of the Sun) × 100
Mass percentage = ((4 x 10²⁶ joules/second × 31,536,000 seconds/year) / (3 x 10⁸ meters/second)²) / (2 x 10³⁰ kilograms) × 100
Finally, we can calculate the number of years required for one percent of the Sun's mass to be converted into energy:
Years = 1% / Mass percentage
Years = 1% / ((4 x 10²⁶ joules/second × 31,536,000 seconds/year) / (3 x 10⁸ meters/second)²) / (2 x 10³⁰kilograms) × 100
After performing the calculations, the result is approximately 2 billion years.
The Sun would have to shine for approximately 2 billion years for one percent of its mass to be converted into energy.
To know more about sun visit:
https://brainly.com/question/28895397
#SPJ11