Two type of microscopes used to view cells are optical and__ microscopes
options:

laser
Electron

Answers

Answer 1
I believe the answer is Electron

Related Questions

how can you Make different objects using blocks

Answers

You can stack the blocks together to make different objects you can also lay them out and make it into a different object

our battery has died and your friends push your vehicle so you can kick-start the engine. You and the vehicle have a combined mass of 1600 kg. If your friends do 6000 J of work and one-third of that is dissipated by friction, how fast is your vehicle traveling?

Answers

Answer:2.23 m/s

Explanation:

Given

Mass of person and vehicle is [tex]m=1600\ kg[/tex]

Total work done is [tex]W_t=6000\ J[/tex]

Friction consumes one-third of the energy

The remaining two-third is consumed to increase the kinetic energy

[tex]\Rightarrow \dfrac{2}{3}\times 6000=\dfrac{1}{2}\times 1600\times v^2\\\\\Rightarrow 4000\times 2=1600\times v^2\\\\\Rightarrow v=\sqrt{5}\ \approx 2.23\ m/s[/tex]

An airplane in level flight is acted on by four basic forces. Drag is air resistance, lift is the upward force provided by the wings, thrust is the force provided
by the airplane's engines, and weight is the downward force of gravity acting on the airplane.
Lift
Thrust
Drag
Weight
In level flight at constant speed, which pair of forces must be equal?

Answers

C lift and weight is the answer

If you stand at a certain position and count the number of crests that pass by you over a certain amount of time, what are you most likely measuring? Period Speed Wavelength Frequency

Answers

Answer:

Wavelength

Explanation:

A vibration can cause a disturbance to travel through a medium, transporting energy without transporting matter. This is what a wave is.

A projectile was fired horizontally from a cliff 20m above the ground. If
the horizontal range of the projectile is 40m, calculate the initial velocity
of the projectile.

Answers

The initial velocity of the projectile is 19.8m/s

Explanation:

First, find time.

From our kinematics equations:

delta y = Vi•t + (1/2)at^2

rearrange,

t = sqrt[(2•delta y)/a]

t = sqrt[(2•20m)/9.8m/s^2]

t = 2.02s

Next, plug time into new kinematics equation to solve for the Vi in the x direction (horizontal)

delta x = Vi•t + (1/2)at^2

delta x = Vi•t

Rearrange:

Vi = delta x/t

Vi = 40m/2.02s

Vix = 19.8m/s

5. Widely spaced isobars indicate
high winds
winds oriented north to south
light winds
variable winds

Answers

Answer:

Light Winds

Explanation:

You measure the pressure of the four tires of your car each to be 35.0 pounds per square inch (psi). You then roll your car forward so that each tire is upon a sheet of paper. You outline the surface area of contact between each tire and the paper, which you later measure to be 32.0 square inches. What is the weight of your car

Answers

Answer:

Weight of car = 36034.88 lb.ft/s²

Explanation:

We are told the pressure of the four tires of your car is; P = 35.0 psi

Also, the surface area of contact is; A = 32 in²

Thus;

Weight of tires = Pressure × Area

W_tires = 35 × 32

Weight_tires = 1120lb.

To get the weight of the car, we will multiply the tire weight by acceleration due to gravity.

It's value in ft/s² is g = 32.174 ft/s²

Thus;

Weight of car = 1120 × 32.174

Weight of car = 36034.88 lb.ft/s²

difference between ferromagnetic and antiferromagnetic ..​

Answers

Answer:

ferromagnetic materials are materials that are highly attracted to magnets while antiferromagnetic materials are materials that are not attracted by magnets

A concept is the general idea of objects, events, animals, or people based on common features, traits, or characteristics.
Please select the best answer from the choices provided
ОТ
OF

Answers

Answer:

True.

Explanation:

Science can be defined as a branch of intellectual and practical study which systematically observe a body of fact in relation to the structure and behavior of non-living and living organisms (animals, plants and humans) in the natural world through experiments.

A concept is the general idea of objects, events, animals, or people based on common features, traits, or characteristics. It is typically considered to be an abstract idea or general notion that is formed by the mental combination of all the characteristics pertaining to the idea.

Generally, concepts are used in the problem-solving process as it serves as a benchmark or yardstick for the solutions. Some examples of concepts in physics are conservation of energy and momentum, electromagnetic waves, heat, motion and forces, electricity and magnetism, gravity, etc.

Answer:

TRUE

Explanation:

edge

Please help I have no idea how to do this

Answers

Answer:

So an object with mass is attracted to another object with mass, and the gravitational force is directly proportional to the masses of the two objects, and inversely proportional to the square of the distance between the two objects.

If distance  were to increase, than the gravitational force would decrease. If mass were to increase, so would the gravitational force.

Explanation:

Explanation:

Lets take gravitational force(F) and mass(m) and distance (r)

now for a body in contact with the surface of the earth, its mass is also considered(m‘),now the mass of the earth(m") is also considered,then the distance from the body to the center of the earth (r).ie it r because its practically the radius of the earth. is also considered

So by using dimensional analysis ....

we get F a m'•m"/r² ,where a is proportional to.

now since F is directly increaseproportional to m ie. F a m, then an increase in mass of the body increases it's gravitational force(and clearly that makes sense because the bigger you are the stronger you get pulled to the ground)

then we also see that F is inversely proportional to r ie.F a 1/r ,then an increase in the distance between the ground an the object decrease it's gravitational force ( meaning as any object on earth keeps on moving away from the ground the gravitational force between the object and the center of the earth is weak, when it reaches space then the force becomes virtually negligible!)

So to answer the second question, we clearly see that doubling the mass of the body increases the gravitational force between it and the earth

and doubling the distance on the other hand will decrease the attraction between the body and the earth

So a body forcefully projected into the air fights against gravity but its easier as it keeps on getting higher, If it has a greater mass like that of a trail or truck , it will not even probably stay in the air for long , unless its projected with a very high velocity

I hope this helps, and you can ask me any question concerning this via the comments platform.

A 4.0 kg circular disk slides in the x- direction on a frictionless horizontal surface with a speed of 5.0 m/s as shown in the adjacent Figure. It collides with an identical disk that is at rest before the collision. The collision is elastic. Disk 1 goes off at an 60 5.0 m/s angle of 60 with respect to the x-direction. Disk 2 g 30 goes off at an angle of 30 with respect to the x-direction. What best describes the speeds of the disks after the collision?

Answers

Solution :

Let [tex]$m_1=m_2=4$[/tex] kg

[tex]$u_1 = 5$[/tex] m/s

Let [tex]$v_1$[/tex] and [tex]$v_2$[/tex] are the speeds of the disk [tex]$m_1$[/tex] and [tex]$m_2$[/tex]  after the collision.

So applying conservation of momentum in the y-direction,

[tex]$0=m_1 .v_1_y -m_2 .v_2_y $[/tex]

[tex]$v_1_y = v_2_y$[/tex]

[tex]$v_1 . \sin 60=v_2. \sin 30$[/tex]

[tex]$v_2 = v_1 \times \frac{\sin 60}{\sin 30}$[/tex]

[tex]$v_2=1.732 \times v_1$[/tex]

Therefore, the disk 2 have greater velocity and hence more kinetic energy after the collision.

Now applying conservation of momentum in the x-direction,

[tex]$m_1.u_1=m_1.v_1_x+m_2.v_2_x$[/tex]

[tex]$u_1=v_1_x+v_2_x$[/tex]

[tex]$5=v_1. \cos 60 + v_2 . \cos 30$[/tex]

[tex]$5=v_1. \cos 60 + 1.732 \times v_1 \cos 30$[/tex]

[tex]$v_1 = 2.50$[/tex] m/s

So, [tex]$v_2 = 1.732 \times 2.5$[/tex]

          = 4.33 m/s

Therefore, speed of the disk 2 after collision is 4.33 m/s

PLEASE HELP ASAPPPPP​

Answers

Answer:

link

Explanation:

ww.comhwhelp

Why does the principal of lateral continuity work?

Answers

Answer:

Explanation:

Gdvxhvdygshxvgxgvvvvgehcbjdhvshchbeukshcvgdferfacsxzdwlf!?ñpdjabdjcbdjshfhfgdsfadqewstgdvdhsvchsxh

The principle of lateral continuity works, because they are continuous. Rocks that are alike but were separated by an erosional feature, can be originally continuous.

What flows in electricity?
A. Electrons
B. Protons
C. Neutrons

Answers

Answer:

A.

Explanation:

Electrons

Anyone know how to do this???

Answers

Answer:

World War 1 was caused by entangled alliances, nationalism, imperialism, and major

advancements in military technology. Does the Treaty of Versaille address those issues?

Explain your answer using facts. (5 points)

1. Describe the components of the reflex arc

Answers

The simplest arrangement of a reflex arc consists of the receptor, an interneuron (or adjustor), and an effector; together, these units form a functional group. Sensory cells carry input from the receptor (afferent impulses) to a central interneuron, which makes contact with a motor neuron.


Which letter represents the
Pacific Plate?

Answers

Answer:

C

Explanation:

how solar system believed to have been formed?​

Answers

Explanation:

Our solar system formed about 4.5 billion years ago from a dense cloud of interstellar gas and dust. The cloud collapsed, possibly due to the shockwave of a nearby exploding star, called a supernova. When this dust cloud collapsed, it formed a solar nebula—a spinning, swirling disk of material.


How much power is required to carry a 35N
package a vertical distance of 18 m if the work on
the package is accomplished in 30 s?

Answers

Explanation:

force=35

distance=18

time=30

power=f×d/t

p=35×18/30

p=21

What is the difference between the isotopes Hydrogen-2 and Hydrogen-3?

Answers

Answer:

They each have one single proton (Z = 1), but differ in the number of their neutrons. Hydrogen has no neutron, deuterium has one, and tritium has two neutrons. The isotopes of hydrogen have, respectively, mass numbers of one, two, and three.

Explanation:

A train crosses 650m long bridge and 800m long platform in 20sec and 30 sec respectively. what is speed of train?​

Answers

Answer:

29 m/s

Explanation:

Assuming the bridge and the platform are back to back,

Average speed = Total Distance/ Total Time

Avg S = 1,450m/50s = 29 m/s

The average speed of the train is 29 m/s

The average speed is defined as the ratio of total distance traveled and the total time taken.

    Total distance = 650 m + 800 m = 1450 m

     Total Time      = 20 s + 30 s = 50 s

    Average speed = total distance/total time

                               = 1450 / 50

                               = 29 m/s is the average speed of the train.

Learn more about average speed:

https://brainly.com/question/11753352

Plaskett's binary system consists of two stars that revolve in a circular orbit about a center of mass midway between them. This statement implies that the masses of the two stars are equal (see figure below). Assume the orbital speed of each star is |v with arrow| = 230 km/s and the orbital period of each is 15.5 days. Find the mass M of each star. (For comparison, the mass of our Sun is 1.99 1030 kg.)

Answers

Answer:

[tex]1.554\times 10^{32}\ \text{kg}[/tex]

Explanation:

M = Mass of each star

T = Time period = 15.5 days

v = Orbital velocity = 230 km/s

G = Gravitational constant = [tex]6.674\times 10^{-11}\ \text{Nm}^2/\text{kg}^2[/tex]

Radius of orbit is given by

[tex]R=\dfrac{vT}{2\pi}[/tex]

We have the relation

[tex]\dfrac{Mv^2}{R}=\dfrac{GM^2}{(2R)^2}\\\Rightarrow M=\dfrac{4Rv^2}{G}\\\Rightarrow M=\dfrac{4\dfrac{vT}{2\pi}v^2}{G}\\\Rightarrow M=\dfrac{2v^3T}{\pi G}\\\Rightarrow M=\dfrac{2\times 230000^3\times 15.5\times 24\times 60\times 60}{\pi\times 6.674\times 10^{-11}}\\\Rightarrow M=1.554\times 10^{32}\ \text{kg}[/tex]

The mass of each star is [tex]1.554\times 10^{32}\ \text{kg}[/tex]

When the temperature of a certain solid, rectangular object increases by AT, the length of one
side of the object increases by 0.010% = 1.0 x 10-4 of the original length. The increase in volume
of the object due to this temperature increase is​

Answers

Explanation:

iausiaolalalLosjjskskakOaokasksoososoapapozosiosoa

Which statement explains how a chemical reaction depends on collisions
between molecules?
A. The reactants must collide in a certain way for the reaction to
occur.
B. The reaction will occur if the reactants collide in anyway.
C. The reaction will occur if the product collide in anyway.
D. The product must collide in a certain way for the reaction to occur ​​

Answers

Answer: A. The reactants must collide in a certain way for the reaction to  occur.

Explanation: I did the quiz :)

Answer:

A) The reactants must collide in a certain way for the reaction to

occur.

Explanation:

A.P.E.X

Which of the following would fill in the table where "A" is?
Symbol
Element Name
Atomic Number Mass Number
#nº
#p
#e
Net Charge
Si
Silicon
A (#13)
27
B (#14 14 C (#15)
0
D (#16)
Potassium
18
39
19
18 E (#17)
A. 3
B. 13
C. 14
D. 28

Answers

Answer:

.lyrjhg.

Explanation:

qqlqfgtjnfh

Consider two insulating balls with evenly distributed equal and opposite charges on their surfaces, held with a certain distance between the centers of the balls. Construct a problem in which you calculate the electric field (magnitude and direction) due to the balls at various points along a line running through the centers of the balls and extending to infinity on either side. Choose interesting points and comment on the meaning of the field at those points. For example, at what points might the field be just that due to one ball and where does the field become negligibly small? Among the
things to be considered are the magnitudes of the charges and the distance between the centers of the balls. Your instructor may wish for you to consider the electric field off axis or for a more complex array of charges, such as those in a water molecule.

Answers

Answer:

interest point:

1) Point on the left side

2) Point within the radius r₁ of the first sphere

3) Point between the two spheres

4) point within the radius r₂ of the second sphere

5) Right side point

Explanation:

In this case, the total electric field is the vector sum of the electric fields of each sphere, to simplify the calculation on the line that joins the two spheres

       

We will call the sphere on the left 1 and it has a positive charge Q with radius r1, the sphere on the right is called 2 with charge -Q with radius r2. The total field is

          E_ {total} = E₁ + E₂

          E_{ total} = [tex]k \frac{Q}{x_1^2} + k \frac{Q}{x_2^2}[/tex]

the bold indicate vectors, where x₁ and x₂ are the distances from the center of each sphere. If the distance that separates the two spheres is d

          x₂ = x₁ -d

          E total = [tex]k \frac{Q}{x_1^2} - k \frac{Q}{(x_1 - d)^2}[/tex]

Let's analyze the field for various points of interest.

1) Point on the left side

in this case

            E_ {total} = [tex]k Q \ ( \frac{1}{x_1^2} - \frac{1}{(x_1 +d)2} )[/tex]

            E_ {total} = [tex]k \frac{Q}{x_1^2}[/tex]   [tex]( 1 - \frac{1}{(1 + \frac{d}{x_1} )^2 } )[/tex]

We have several interesting possibilities:

* We can see that as the point is further away the field is more similar to the field created by two point charges

* there is a point where the field is zero

            E_ {total} = 0

             x₁² =  (x₁ + d)²

           

2) Point within the radius r₁ of the first sphere.

In this case, according to Gauus' law, the charge is on the surface of the sphere at the point, there is no charge inside so this sphere has no electric field on its inner point

              E_ {total} = [tex]-k \frac{Q}{x_2^2} = -k \frac{Q}{((d-x_1)^2}[/tex]

this expression holds for the points located at

                  -r₁ <x₁ <r₁

3) Point between the two spheres

                E_ {total} = [tex]k \frac{Q}{x_1^2} + k \frac{Q}{(d+x_1)^2}[/tex]

This champ is always different from zero

4) point within the radius r₂ of the second sphere, as there is no charge inside, only the first sphere contributes

                  E_ {total} = [tex]+ k \frac{Q}{(d-x_1)^2}[/tex]+ k Q / (d-x1) 2

point range

                  -r₂ <x₂ <r₂

             

5) Right side point

            E_ {total} = [tex]k \frac{Q}{(x_2-d)^2} - k \frac{Q}{x_2^2}[/tex]

             E_ {total} = [tex]- k \frac{Q}{x_2^2} ( 1- \frac{1}{(1- \frac{d}{x_2})^2 } )[/tex]- k Q / x22 (1- 1 / (x1 + d) 2)

we have two possibilities

* as the distance increases the field looks more like the field created by two point charges

* there is a point where the field is zero

Please help me!!!!!!!!!

Answers

Hi there! :)

[tex]\large\boxed{17.32 m/s}[/tex]

Use the following equation in solving for kinetic energy:

KE = 1/2mv² where:

KE = kinetic energy (J)

m = mass (kg)

v = velocity (m/s)

Plug in the given values:

12,000 = 40v²

Divide both sides by 40:

12,000 / 40 = v²

300 = v²

Take the square root of both sides:

√300 = v

v ≈ 17.32 m/s

A 1200kg car is moving down a 30° hill. The driver applies the
brakes at a time that the car's speed is 12m/s. What constant force F
must result if the car is to stop after travelling 100m?​

Answers

864 N of constant force is required

What happens during
convection?
A. Heat is transferred from warmer
objects to cooler objects by direct contact.
B. Heat is transferred from warmer
objects to cooler objects by moving fluids.
C. Heat is transferred from warmer
objects to cooler objects through empty
space.

Answers

Answer:

B

Explanation:

The answer is b because heat is transferred from warmer objects to cooler objects by fluid

When light passes through
an
object, it's called
A. transparent
B. absorption
C. refraction
D. reflection

Answers

C-refraction because when it passes through the object it is at bending of light ray
Other Questions
In your own words, explain the six major ways in which Turkle says that computers are changing the way people think. Why does she think it is important that we pay attention to these changes? I need help ASAP marking braniiest 328 x 36 Step by step What is the radius and diameter of the following circle? Find the equation, in slope-intercept form, of a line with a slope of 5/2 which goes through the point (-2, 4). QUESTIONWhat is the exigence of the piece and how does that factor into theauthor's purpose? Find the area of a trapezoid. Help me pls for 13 points f(x) = -2x^2-4x+11in the standard formf(x) = a(x h)^2+k What is the rocks velocity when it reaches the bottom? How do you know? Martin and Clara decide to keep track of the number of different colors in two brands of tennis shoes, brand A and brand B. Their results are represented by the dot plots. The mean absolute deviation for brand A is . The mean absolute deviation for brand B is . The mean absolute deviations for the two brands similar. Find the slope of the line graphed A news article estimated that only 4% of those age 65 and older who prefer to watch the news, rather than to read or listen, watch the news online. This estimate was based on a survey of a large sample of adult Americans. Consider the population consisting of all adult Americans age 65 and older who prefer to watch the news, and suppose that for this population the actual proportion who prefer to watch online is 0.04. (a) A random sample of n = 100 people will be selected from this population and p, the proportion of people who prefer to watch online, will be calculated. What are the mean and standard deviation of the sampling distribution of p? (Round your standard deviation to four decimal places.) mean 0.04 standard deviation 0.0196 (b) Is the sampling distribution of p approximately normal for random samples of size n = 100? Explain. The sampling distribution of p is approximately normal because np is less than 10. O The sampling distribution of p is approximately normal because np is at least 10. The sampling distribution of p is not approximately normal because np is less than 10. The sampling distribution of p is not approximately normal because np is at least 10. The sampling distribution of is not approximately normal because n(1-P) is less than 10. (c) Suppose that the sample size is n = 400 rather than n = 100. What are the values for the mean and standard deviation when n = 400? (Round your standard deviation to four decimal places.) mean 0.03 standard deviation 0.0085 Does the change in sample size affect the mean and standard deviation of the sampling distribution of ? If not, explain why not. (Select all that apply.) 2 When the sample size increases, the mean increases. When the sample size increases, the mean decreases. When the sample size increases, the mean stays the same. The sampling distribution is always centered at the population mean, regardless of sample size. When the sample size increases, the standard deviation increases. When the sample size increases, the standard deviation decreases When the sample size increase the standard deviation stays the same. The standard deviation of the sampling distribution is always the same as the standard deviation of the population distribution regardless of sample size. Suppose that the sample size is n = 400 rather than n = 100. What are the values for the mean and standard deviation when n = 400? (Round your standard deviation to four decimal places.) mean 0.03 standard deviation 0.0085 Does the change in sample size affect the mean and standard deviation of the sampling distribution of p? If not, explain why not. (Select all that apply.) When the sample size increases, the mean increases. When the sample size increases, the mean decreases. When the sample size increases, the mean stays the same. The sampling distribution is always centered at the population mean, regardless of sample size. When the sample size increases, the standard deviation increases. When the sample size increases, the standard deviation decreases. When the sample size increases, the standard deviation stays the same. The standard deviation of the sampling distribution is always the same as the standard deviation of the population distribution, regardless of sample size. (d) is the sampling distribution of p approximately normal for random samples of size n = 400? Explain. The sampling distribution of p is approximately normal because np and n(1 - p) are both at least 10. The sampling distribution of p is approximately normal because np and n(1 - 0) are both less than 10. The sampling distribution of p is not approximately normal because np and n(i - p) are both at least 10. The sampling distribution of p is not approximately normal because np and n(1-P) are both less than 10. The sampling distribution of p is not approximately normal because only np is at least 10. u r perfect the way you are dont let anyone tell you different Please help me with 1,2,3,4,5 dont give me a link Hogg favored a Railroad Commission that would -. give small loans to farmers to pay their debtsB. help stock market investors earn greater returnsC. assist immigrants in finding jobs in the railroad industryD. use government policies to end unfair business practices The measures of the angles of a triangle are shown in the figure below. Solve for x. Two families go to a baseball game. One family purchases two adult tickets andthree youth tickets for $33. Another family purchases three adult tickets and twoyouth tickets for $37. Find the individual price of each adult and youth ticket. plz, help 25 points whoever answers gets brainiest Read the sentence.She admired the intricacy of the dress and the diaphanous top layer of pale pink that seemed to float above the rest of the fabric.What does the word diaphanous mean in the sentence?A.invisibleB. unpleasantC. moldedD. transparent James is running late to his cousin's wedding and drives the 45 miles between his house and the wedding location 20 miles per hour faster than the speed, r, that he drives to get home. It takes him t hours to get to the wedding and 1 hour to get home. Which equation best represents this information? A.) 45=20t B.)r+20=32 C.)45=(r+20)t+r D.)(r+20)t=r A ________ can contain many ecosystems?A. habitatB. ecosystemC. biomeD. population