URGENTLY NEED HELP

This is a 2 part question

42) You pull downward with a force of 28 N on a rope that passes over a disk-shaped pulley of mass 1.2 kg and radius 0.075 m. The other end of the rope is attached to a 0.67-kg mass. (a) Is the tension in the rope the same on both sides of the pulley? If not, which side has the greater tension? (b) Find the tension in the rope on both sides of the pulley.

Answers

Answer 1

Answer:

The net force on the hanging mass is thus

2 T Mg     18 6.6 N 11.4 N

, enough to accelerate it upward at

17 m/s2

. The angular acceleration of the pulley is thus

   

2 2

Explanation:

Answer 2

The tension in the rope on both sides of the pulley 20.21N.

To solve this problem, we'll need to consider the forces acting on both sides of the pulley and apply Newton's second law of motion. Let's break it down step by step:

(a) Is the tension in the rope the same on both sides of the pulley?

No, the tension in the rope is not the same on both sides of the pulley. The side with the greater mass attached will experience a greater tension in the rope.

(b) Find the tension in the rope on both sides of the pulley:

Calculate the gravitational force on each mass:

Gravitational force on the pulley: Fpulley = mpulley * g, where mpulley is the mass of the pulley and g is the acceleration due to gravity (approximately 9.8 m/s²).

Gravitational force on the hanging mass: Fhanging = mhanging * g, where m_hanging is the mass of the hanging mass.

Calculate the net force on the pulley:

Net force on the pulley is the difference between the tension forces on either side: Fnet = TLeft - Tright.

Apply Newton's second law to the pulley:

For the pulley, Fnet = mpulley * a, where a is the acceleration of the pulley. Since the pulley is assumed to be massless, we can use the relationship a = α * r, where α is the angular acceleration and r is the radius of the pulley.

Use the relationship between linear acceleration and angular acceleration:

α = a / r.

Equate the torque due to the tension to the moment of inertia times the angular acceleration:

τ = I * α, where τ is the torque, I is the moment of inertia of the pulley, and α is the angular acceleration.

Substitute the expression for α and solve for the net tension:

Tnet = (τ / r) = (I * α) / r = (1/2 * mpulley * r² * α) / r = (1/2 * mpulley * r * a).

Now, substitute the expression for a from step 3 and solve for the net tension:

Tnet = (1/2 * mpulley * r * α) = (1/2 * mpulley * r * (a / r)) = (1/2 * mpulley * a).

Substitute the expression for a from step 2 (Fnet = mpulley * a) and solve for the net tension:

Tnet = (1/2 * Fnet).

Now, you can find the tensions on each side of the pulley:

Tleft = Tnet + Fhanging

Tright = Tnet - Fpulle

To know more about tension

https://brainly.com/question/16943376

#SPJ2


Related Questions

A block slides on a rough 45 degree incline. The coefficient of friction is µk what is the ratio of acceleration when the block accelerates down the incline to the acceleration when the block is projected up the incline​

Answers

it is the same, force diagram is the same, acceleration depends on forces. the only thing different is the initial velocity.

Answer:

[tex]\frac{a_{d}}{a_{i}} = \frac{(1 -mu)}{mu}[/tex]

= (1 - μ)/μ

Explanation:

Always draw a diagram!

Up the incline:

[tex]Fr_{max}[/tex] = maximum friction

[tex]Fr_{max}[/tex] = μk

k = R = mg.cos(45) = mg.sin(45)

Resolution of forces parallel to the slope:

F (Fp in the diagram) = force of propulsion

g = gravity

[tex]F - Fr_{max} = ma_{i}[/tex]

[tex]F -[/tex] μ.mg.cos(45) [tex]= ma_{i}[/tex]

Down the decline:

Resolution of forces:

[tex]mg.sin(45) - Fr_{max} = ma_{d}[/tex]

[tex]mg.sin(45) -[/tex] μ.mg.cos(45) [tex]= ma_{d}[/tex]

Then, find the ratio:

[tex]\frac{ma_{d}}{ma_{i}} = \frac{mg.sin(45) - mu.mg.cos(45)}{-F + mu.mg.cos(45)} \\\\ \frac{a_{d}}{a_{i}} = \frac{k - k.mu}{-F + k.mu} \\\\ = \frac{k(1 -mu)}{-F + k.mu}[/tex]

Potentially, there is no need to consider F in this situation, in which case:

[tex]\frac{a_{d}}{a_{i}} = \frac{k(1 -mu)}{k.mu} \\\\ = \frac{(1 -mu)}{mu}[/tex]

= (1 - μ)/μ

If a force of 50 Newton's was applied to an object with a mass of 5 kilograms, what will the object's acceleration be?

Answers

Here’s my work to your question. I used Newton’s Second Law.
Force = mass * acceleration

A force of 50 N was applied to an object with a mass of 5 kg, then the acceleration of the object will be 10 m/s².

What is Acceleration?

The rate of change in an object's velocity with respect to time is known as acceleration in mechanics. The vector quantity of accelerations. The direction of the net force that is acting on an object determines its acceleration.

Since acceleration has both a magnitude and a direction, it is a vector quantity. Velocity is a vector quantity as well. The definition of acceleration is the change in velocity vector over a time interval divided by the time interval.

There are several types of acceleration :

Uniform AccelerationNon-Uniform AccelerationAverage Acceleration

According to the question, the given values are :

Force, F = 50 N

Mass, m = 5 kg

Force = m × a

a = 50 / 5

a = 10 m/s².

Hence, the acceleration of the object will be 10 m/s².

To get more information about acceleration :

https://brainly.com/question/2303856

#SPJ2

This is physics and it says collision and elastic/inelastic i need help

Answers

The initial velocity of the 3250 Kg mass is 2.1 m/s. The distance covered by the larger mass in 5s is 4.7 cm.

In this problem, we have to apply the law of conservation of linear momentum. Note that;

Momentum before collision = Momentum after collision

m1u1 + m2u2 = m1v1 + m2v2

(2150 × 10) + (3250u1) = (2150 + 3250)5.22

21500 + 3250u1 = 5400 × 5.22

3250u1  = 28188 - 21500

u1 = 28188 - 21500/3250

u1 = 2.1 m/s

2) Again from the principle of conservation of linear momentum;

(0.40 × 3.5) + (0.60 × 0) = (0.40  × 0.70) + (0.60 × v2)

1.4 = 0.28 + 0.60v2

1.4 - 0.28 =  0.60v2

v2 = 1.87 cm/s

Using;

s = 1/2 ( u + v)t

s = 1/2(0 + 1.87) × 5

s = 4.7 cm

Learn more: https://brainly.com/question/8898885

I need help with parts a and B of this question

Answers

Answer:

Explanation:

Let x be the leaf spring compression distance

F = kx

5.20 x 10⁵ = (5.45 x 10⁵)x + (3.80 x 10⁵)(x - 0.500)

5.20 x 10⁵ = (5.45 x 10⁵)x + (3.80 x 10⁵)(x) - 1.90 x 10⁵

7.10 x 10⁵ = (9.25 x 10⁵)x

x = 0.76756...

x = 0.768 m

W = ½(5.45 x 10⁵)0.768² +  ½(3.80 x 10⁵)(0.768 - 0.500)²

W = 174,148.648648...

W = 174 KJ

True or False. Father of a multitude" obeyed God's command to kill His son because the Ten Commandments had not yet been given.

Answers

Answer:

Explanation:

The father of the Multitude was Abraham. And he did precede the 10 commandments. But the story really has nothing to do with the 10 commandments.

He obeyed God's Command because it was God who issued it. Abraham had complete faith in God's ability to make things come out right. The sacrifice of Isaac was a test of faith.

I would advise you to answer true, but whoever wrote the question employed a twisted kind of logic. The sacrifice of Isaac had nothing to do with the 10 commandments. Thou Shalt not murder is not really covered by this circumstance.

So true might not be the correct answer. The question is very complex and does not lend itself to a simple True/ False answer.

A physics professor leaves her house and walk along the sidewalk toward campus. After 5 min it starts to rain and she returns home. Her distance from her house as a function of time shown in figure: 1. At which of the labelled point is her velocity (a) zero? (b) Constant and positive? (c) constant and negative ? (d) Increasing in magnitude? (e) Decreasing in magnitude?

Answers

Answer: I think its zero-

I dont really know about this...

Which of the following changes would decrease the force between two charged particles by a factor of 9? A. Decreasing the distance between the particles by a factor of 3 B. Increasing the distance between the particles by a factor of 3 C. Increasing the amount of charge on each particle by a factor of 9 D. Decreasing the amount of charge on one of the particles by a factor of 3​

Answers

Option B is correct.Increasing the distance between the particles by a factor of 3 decrease the force between two charged particles by a factor of 9.

What is electric force?

The electric force between the two charges is directly proportional to the product of the charge and inversely proportional to the square of the distance between them.

The electric force is found as;

[tex]\rm F = \frac{K q_1q_2}{r^2}[/tex]

The electric force between the two charges is directly proportional to the product of the charge.

The electric force is inversely proportional to the square of the distance between them.

Increasing the distance between the particles by a factor of 3 decreases the force between two charged particles by a factor of 9

Hence, option B is correct.

To learn more about the electric force, refer to the link;

https://brainly.com/question/1076352

#SPJ2


A gold fish weighing 13g has a speed of 8.8m/s. What is its Kinetic energy

Answers

Answer:

0.47 J

Explanation:

If the speed of the magnet is doubled, the induced voltage is ________ . twice as great four times as great half as great unchanged

Answers

If the speed of the magnet is doubled, the induced voltage is twice as great

Faraday's law of induction states that whenever relative motion exists between a coil and magnetic field, a voltage will induce in the circuit and this voltage is proportional to the rate of change of the flux. The expression for the motional emf is as follows:

ε=Blv

Here, ε is the motional emf, B is the magnetic field, l is the length of the conductor, and v is the velocity at which the magnetic field changes.

The induced voltage by the moving magnet is directly proportional to the speed of the magnet. Therefore, an increase in the speed of the magnet will increase the induced voltage.

If the speed of the magnet is doubled, the induced voltage is twice as great

Find out more at: https://brainly.com/question/13369951

Which phrase describes the energy transformation that happens in a
generator?
A. Electrical energy into chemical energy
ООО
B. Electrical energy into mechanical energy
C. Chemical energy into electrical energy
O
D. Mechanical energy into electrical energy
SI

Answers

Answer:

Mechanical energy into electrical energy

Explanation:

Answer:

ExplanMechanical energy into electrical energy

SIation:

a spring with a spring constant of 65 n/m is displaced -94cm. what is the magnitude of the force exerted by the spring

Answers

Answer:

Explanation:

F = kx = 65 N/m(0.94 m) = 61.1 = 61 N

Select the correct answer. Chloe is playing the flute some distance away from a crowd. If the atmospheric temperature is 15°C, what is the speed of the sound traveling from the flute? A. 340 meters/second B. 330 meters/second C. 320 meters/second D. 310 meters/second E. 300 meters/second

Answers

Answer:

A. 340 meters/second

I think this is the right answer.

A body with a uniform acceleration travels distances of 24m and 64m during the first two equal consecutive intervals of time, each of duration 4s. Determine the initial velocity and acceleration of the moving body.​

Answers

Answer:

Explanation:

Average velocity in the 24 m interval is 24 / 4 = 6 m/s

Average velocity in the 64 m interval is 64 / 4 = 16 m/s

There is a 4 second interval between the two points where average velocity equals actual velocity

a = Δv/t = (vf - vi) / t = (16 - 6) / 4 = 2.5 m/s²

s = v₀t + ½at²

24 = v₀(4) + ½(2.5)4²

4v₀ = 24 - 20

v₀ = 1 m/s

Not asked for but the velocity at the end of the first segment and beginning of the second segment is 11 m/s and final velocity is 21 m/s

7. Which of the following explains how radiometric dating is used to estimate absolute
age.
a. By comparing how deep in the curst the radioactive material in a sample of rock
is, scientists can calculate the length of time since the rock formed.
b. By comparing the amount of organic material in a sample of rock, to the known
rate of decay of the parent rock, scientists can calculate the length of time since
the rock formed.
C. By comparing the amount of radioactive material in a sample of rock, to the
surrounding rocks, scientists can calculate the length of time since the rock
formed.
d. By comparing the amount of a radioactive material in a sample of rock, to the
know rate of decay of the parent rock, scientists can calculate the length of time
since the rock formed.

Answers

Answer:

d.

Explanation:

Radiometric dating is a method of dating geological/ archaeological specimens by determining the relative proportions of particular radioactive isotopes present in a sample. Carbon dating is a form of radiometric dating, but, in choice b, you're not comparing the carbon to the rock. One would compare ¹⁴C levels within the organic compound, just as one would compare radioactive isotope levels in a rock.

How can whales descend quickly and face no problems

Answers

Answer:

Whales face an increasing number of threats including: For hundreds of years people hunted whales for their oil to fuel lamps and candles, to lubricate machinery and to make margarine, lipsticks and other products. They also used baleen whales to make tennis racquets and corsets!

Explanation:

A 1.2 kg hammer slams down on a nail at 5.0 m/s and bounces off at 1.0 m/s. If the impact lasts 1.0 ms, what average force is exerted on the nail?​

Answers

Answer:

Explanation:

Impulse results in a change of momentum

FΔt = mΔV

F = mΔV/Δt

The impulse acting on the hammer will equal the impulse acting on the nail

If we assume upward is the positive direction

F = m(vf - vi)/t

F = 1.2(1.0 - (-1.5)) / 0.001

F = 3000 N

A 1.2 kg hammer slams down on a nail at 5.0 m/s and bounces off at 1.0 m/s, if the impact lasts 1.0 ms, so the average force exerted on the nail is 3000 N.

What is average force?

According to Newton's third law, there is an equal and opposite force for every force. The hammer's force on the nail will be identical in size to the nail's force on the hammer, but opposite in direction.

Momentum shifts as a result of impulse.

FΔt = mΔV

F = mΔV/Δt

The force exerted on the hammer will be equivalent to the force exerted on the nail.

m(vf - vi)/t = F

F = 1.2(1.0 - (-1.5)) / 0.001

F = 3000 N

Therefore, F = 3000 N, if A 1.2 kg hammer slams down on a nail at 5.0 m/s and bounces off at 1.0 m/s, if the impact lasts 1.0 ms.

Learn more about force, here:

https://brainly.com/question/20038742

#SPJ2

What is the significance of Isaac's name? What is the significance of Isaac's name?

Answers

Answer:

Isaac is one of the three patriarchs of the Israelites and is an important figure in the Abrahamic religions, including Judaism, Christianity, and Islam. Isaac's name means "he will laugh", reflecting the laughter, in disbelief, of Abraham and Sarah, when told by God that they would have a child.

Hope this helps !!

Explanation:

Itz Deepika Here to help ~ .

Note:- If you have more questions then let me know !!


17. The shape of a river is determined by which of the following? (Choose all that
apply)
A Erosion
B. Deposition
C. Weathering
D. water speed

Answers

Answer:

Water speed Plays a key role In determining The shape of it

A woman skis from rest down a hill 20 m high. If friction is negligible, what is her speed at the bottom of the slope? Select one: O a. 20 m/s O b. 12 m/s O c. 400 m/s O d. 6 m/s​

Answers

Hi there!

We can use the work-energy theorem to solve.

Recall:

[tex]\large\boxed{E_i = E_f}}[/tex]

Initial energy = final energy

The initial energy is purely potential (she starts from rest), and, if we assign the bottom of the slope as the 0 line, her energy at the bottom is purely kinetic.

PE = mgh

KE = 1/2mv²

We can begin by setting the two equal:

mgh = 1/2mv²

Cancel out the mass and rearrange to solve for velocity:

2gh = v²

v = √2gh

Plug in given values and use g ≈ 10 m/s²:

v = √2(10)(20) = 20 m/s

Anita Knapp needs to get hay to cows in a frozen field using an airplane flying 80.0 m/s, at a height of 300,m. If at the last minute, how far from the cow would she have to release the hay in order to hit the cow? *

Answers

Answer:

Explanation:

If we ignore wind resistance, the time needed for the hay to drop from vertical rest is

t = √(2h/g) = √(2(300)/9.81) = 7.82 s

d = vt = 80.0(7.82) = 626 m before passing over the cow.

A swimmer who can swim in still water at a speed of 4km/h is swimming in a river. the river flows at a speed of 3km/h. calculate the speed of the swimmer relative to the river bank when she swims:- 1. downstream 2.upstream​

Answers

Explanation:

Downstream: you just sum the magnitude of the velocity vectors:

3km/h + 4km/h = 7km/h

Upstream: difference of the magnitudes of the velocity vectors, in absolute value:

|3km/h - 4km/h| = 1km/h

A wire that is 1.0 m long with a mass of 90 g is under a tension of 710 N. When a transverse wave travels on the wire, its wavelength is 0.10 m. What is the frequency of this wave? ​

Answers

Answer:

890 Hz

I hope you liked my answer. Thank You!

if the force acting on a body of mass 40 k.g is doubled by how much will the acceleration change​

Answers

Answer:

Explanation:

Ignoring friction, the acceleration will double

F = ma

2F = m(2a)

Can someone help me solve this problems please? It's a physics problem.

Answers

Answer:

i cant see

Explanation:

but im smart

Identify the types of motion:-
the movement of the snail on the ground
the strings of the guitar
the whirling of stone tied with a thread

Answers

Answer:

the movement of snail on the ground is in random motion.

the strings of the guitar is in oscillatory motion.

the whirling of stone tied with a thread is in circular motion.

a uniform thin rod of length l and mass m is allowed to rotate on a frictionless pin passing through one end. The rod is released from rest in the horizontal position. a.) What is the speed of the center of gravity when the rod reaches its lowest position? b.) What is the tangential speed of the lowest point of the rod when the rod reaches its lowest position?

Answers

Answer:

Explanation:

Potential energy gets converted to rotational kinetic energy

a)         ½Iω² = mgh

½(mL²/3)ω² = mgL/2

       (L/3)ω² = g

              ω = [tex]\sqrt{3g/L}[/tex]

       v(CG) = (L/2) [tex]\sqrt{3g/L}[/tex]

Not sure if you wanted angular speed or tangential speed of the CG so I gave both.

b) v = =  L [tex]\sqrt{3g/L}[/tex]

the driver of a 2.0 × 10³ kg red car traveling on the highway at 45m/s slams on his brakes to avoid striking a second yellow car in front of him, which had come to of because locking ahead.After the brakes are applied a constant friction force of 7.5 × 10³ N acts on the car ignore air resistance.

a₎ Determine the least distance should the brakes be applied to avoid a collision with the other vehicle?

Answers

Answer:

Explanation:

a = F/m = 7500/2000 = 3.75 m/s²

v² = u² + 2as

s = (v² - u²) / 2a

s = (0² - 45²) / (2(-3.75))

s = 270 m

3. Particles carrying no charge ____________

Answers

Answer:

Neutrons

Explanation:

The graph below shows the variation with distance r from the nucleus of the square of the wave function, Ψ^2, of a hydrogen atom according to Schrödinger theory.
A. is most likely to be near a.
B. is always a.
C. is always less than a.
D. is always greater than a.

Answers

The region a represents the distance of the electron from the nucleus.

According to the wave mechanical model of the atom, the probability of finding an electron within a given volume element (representing the atom) is the square of the wave function psi.

Since a is the region in space where there is the greatest probability of finding the electron in the atom, it follows that distance of the electron form the atom is always a.

Learn more about the wave mechanical model: https://brainly.com/question/1382157

The force as a function of displacement of a moving object is presented by the graph. How much work is done when the object moves from 5 m to 8 m? *

Answers

Answer:

Explanation:

Work is the area under the curve between the limits

W = ½(5)(8 - 5) = 7.5 J

The work done when an object moves from 5 m to 8 m is 7.5 J.

Work done

The work done in moving an object from one point to another is equal to the product of force and displacement of the object.

W = Fs

Area under a curve

The work done on an object is equal to area under the curve

The area between point 5 m and 8 m = ¹/₂ x (8 - 5) x 5 = 7.5 J

Thus, the work done when an object moves from 5 m to 8 m is 7.5 J.

Learn more about work done here: https://brainly.com/question/8119756

Other Questions
can anyone help me please Discuss the concept of inserting a gene from marine algae into food crops. If researchers are successful in this endeavor, salt water is then an option for food crop irrigation. Discuss possible pros and cons of this idea. This response should be a minimum of 3 paragraphs to discuss all parts of the discussion question. Each paragraph should be a minimum of 5-7 well developed sentences. Assume running consumes 93 calories per mile. If you run 8 - minute miles, what is your average power output, in watts? Jean-Paul Sartre won the Nobel Prize in Literature in 1964 but he declined to except the award for personal reasons what is a common obstacle that every civilization must face c) What are the causes of Green House Effect? Blacks car has traveled 100 miles in 1 an 1/4 hours. How many miles per hour in Blacks car traveling? Read this excerpt from Vachel Lindsays "In Praise of Johnny Appleseed. " Self-scourged, like a monk, with a throne for wages, Stripped like the iron-souled Hindu sages, Draped like a statue, in strings like a scarecrow, His helmet-hat an old tin pan, But worn in the love of the heart of man. The author most likely uses the allusions in this excerpt to indicate Appleseeds intelligence. Explain Appleseeds religious faith. Depict Appleseeds love of agriculture. Illustrate Appleseeds humble station. Which of the following best describes the maya civilization?. 5. (27:21) Harry says there are 5 families gone onone block alone. If there are 12 families on thatblock, how many families might you expect to begone on a street with 60 families? Write an equation of each sentence. Use n to represent the unknown number. You can use the back page for your solution. (2 points each) 11. Six increased by a number is twenty. 12. A number decreased by seven is four. 13. The sum of two consecutive numbers is thirty-one. 14. The sum of twice a number and two is thirteen. 15. One less than a number is eighteen. 16. The square of a number increased by four is twice the number. 17. Twice a number is one-half. 18. The product of a number and its half is eighteen. 19. The average of a number and ninety is seventy. 20. Two more than a number is twelve.PLEASE HELP Me in all organisms, certain genes are expressed at any given time while other genes are not. both prokaryotes and eukaryotes regulate gene expression at the transcription stage. however, the greater complexity of eukaryotic cells makes it possible for gene expression to be regulated at many other stages as well. the diagram below shows different stages at which gene expression may be regulated in eukaryotes. what is the difference between a population distribution and a sampling distribution Find the value of x6.1 - angles of polygons What are the principles of International Law. Explain. Which processes form glaciers A_________is a common multiple of two or more denominators To what does Amos compare righteousness? Which of the following best describes the slope of the line below?O A. NegativeO B. ZeroO C. Positive D. Undefined How i can answer this question, NO LINKS, if you answer correctly i will give u brainliest!