Answer:
Step-by-step explanation:
-9/6 im not sure so dont get mand if im wrong
he graph for the equation y = x minus 4 is shown below. On a coordinate plane, a line goes through (0, negative 4) and (4, 0). Which equation, when graphed with the given equation, will form a system that has an infinite number of solutions? y minus x = negative 4 y minus x = negative 2 y minus 4 = x y + 4 x = 1
A system of equations with an infinity number of solutions, along with y = x - 4, is formed with the following equation:
y - x = -4.
What are linear functions?The slope-intercept definition of a linear function is given as follows:
y = mx + b.
The coefficients of the function are given as follows:
m is the slope.b is the y-intercept.The combination of two linear functions results in a system of equations.
Each intersection point of the linear functions is a solution to the system of equations, then a system with infinity solutions will only happen when the two lines are the same, that is, they have the same slope and the same intercept.
Hence the desired equation in this problem is given as follows:
y - x = -4.
Which in slope-intercept form is given by:
y = x - 4.
Which is equals to the graphed equation, hence they intersect infinite times.
More can be learned about linear functions at https://brainly.com/question/24808124
#SPJ1
Answer:
A) y - x = -4
Step-by-step explanation:
The cost of ms. Clark's restaurant meal is $25. 50. As a tip, ms. Clark gives the waiter 20% of the meal's cost. What is the total amount ms. Clark pays, including tip? responses $26. 01 $26. 01 $30. 60 $30. 60 $32. 64 $32. 64 $33. 5.
As per the given percentage, the total amount Ms. Clark pays, including tip is $30.1
The term percentage is referred as a portion of a whole expressed as a number between 0 and 100 rather than as a fraction.
Here we have given that the cost of Ms. Clark's restaurant meal is $25. 50. And as a tip, Ms. Clark gives the waiter 20% of the meal's cost.
Now, we need to find the total amount Ms. Clark pays, including tip.
While we looking into the given question,
The following values are given in the question,
Total amount of bill for Ms. Clark = $25.50
Percentage of tip = 20%
Then the amount of tip is calculated as,
=> 25.50 x 20/100
=> 25.50 x 0.20
=> 5.1
Then the total amount paid by Ms. Clark is
=> 25.50 + 5.1
=> 30.1
To know more about Percentage here.
https://brainly.com/question/13729841
#SPJ4
PLS HELP QUICK PLS
The two figures below are similar.
30 in
???
inches
12 in
16 in
What is the length of the missing side?
Answer:
40 inches
Step-by-step explanation:
Similar Triangles
In similar triangles, corresponding sides are always in the same ratio.
Let x be the length of the missing side.
Therefore:
[tex]\implies \sf x:16=30:12[/tex]
[tex]\implies \sf \dfrac{x}{16}=\dfrac{30}{12}[/tex]
[tex]\implies \sf 16 \cdot \dfrac{x}{16}=16 \cdot \dfrac{30}{12}[/tex]
[tex]\implies \sf x=\dfrac{480}{12}[/tex]
[tex]\implies \sf x=\dfrac{40 \cdot 12}{12}[/tex]
[tex]\implies \sf x=40[/tex]
Therefore, the length of the missing side is 40 inches.
What is the slope of the line that passes through the points (4, 7) and (7, 16)? Write your answer in simplest form.
Answer:
3
Step-by-step explanation:
Lets use the slope formula, Which is given as :-
[tex]\sf{ \dfrac{y2-y1}{x2-x1} }[/tex]
Substitute the points we have to the formula :-
[tex]\begin{gathered}\sf \longmapsto {\dfrac{16 - 7}{7-4 }} \\ \sf{ \longmapsto {\dfrac{9}{3}} \\ \sf{\longmapsto 3} \end{gathered}[/tex]
Thus, The correct answer is 3!!
Two lines intersect at the point (1, 3).
The y-intercepts of the lines are 1 and 2.
What are the equations of the lines?
In the case of the two lines you described, the y-intercepts are 1 and 2, meaning that the lines cross the y-axis at the points (0,1) and (0,2), respectively.
To find the equations of the lines, you can use the slope-intercept form of a line, which is written as y = mx + b, where m is the slope of the line and b is the y-intercept. Since the lines intersect at the point (1,3), you can use this point and the y-intercept of each line to find the slope of each line.
For the first line, with y-intercept 1, the slope is given by the formula m = (y2 - y1) / (x2 - x1), where (x1,y1) is the given point (1,3) and (x2,y2) is the y-intercept (0,1). Plugging in these values, we get m = (1 - 3) / (0 - 1) = -2. So the equation of this line is y = -2x + 1.
For the second line, with y-intercept 2, the slope is given by the same formula, using the point (1,3) and the y-intercept (0,2). This gives us m = (2 - 3) / (0 - 1) = -1. So the equation of this line is y = -1x + 2.
Therefore, the equations of the two lines are y = -2x + 1 and y = -1x + 2.
How do you explain temperature on a graph?
Temperature is typically represented on a graph by plotting points along the vertical (y-axis) to represent the temperature. The horizontal (x-axis) is typically used to represent time or location.
Temperature is typically represented on a graph by plotting points along the vertical (y-axis) to represent the temperature. The horizontal (x-axis) is typically used to represent either time or location. Each point on the graph is a measurement of temperature at a specific moment in time or location. The data points can be connected with a line to create a line graph, which can show temperature trends over time or in different locations. If two sets of data are being compared, such as indoor and outdoor temperatures, two lines can be drawn on the same graph to compare the two. By looking at the graph, one can easily identify the highest and lowest temperatures, as well as any trends over time. Additionally, the graph can be used to identify when temperatures are above or below a certain threshold. Graphs can be used to quickly and easily represent data, making them a powerful tool in understanding temperature.
Learn more about graph here
https://brainly.com/question/17267403
#SPJ4
A 12-foot ladder is placed against a vertical wall of a building, with the bottom of the ladder standing on level ground 10 feet from the base of the building. How high up the wall does the ladder reach?
The height of the wall where the ladder reaches will be 6.33 feet.
What is a Pythagoras theorem?It expresses that the region of the square whose side is the hypotenuse is equivalent to the amount of the region of the squares on the other different sides.
The Pythagoras theorem formula is given as
H² = P² + B²
A 12-foot stepping stool is set against an upward mass of a structure, with the lower part of the stepping stool remaining on level ground 10 feet from the foundation of the structure.
The height of the wall where the ladder reaches will be calculated as,
12² = P² + 10²
144 = P² + 100
P² = 44
P =6.33 feet
The level of the wall where the stepping stool arrives freely will be 6.33 feet.
More about the Pythagoras theorem link is given below.
https://brainly.com/question/343682
#SPJ1
What is are the things s2 considered to show that the two triangles are congruent?
Answer:
Congruence in two or more triangles depends on the measurements of their sides and angles. The three sides of a triangle determine its size and the three angles of a triangle determine its shape. Two triangles are said to be congruent if pairs of their corresponding sides and their corresponding angles are equal.
hope this helps mark me brainliest
Step-by-step explanation:
How will you compare the graph of a function and the graph of its inverse?
The graph of a function and the graph of its inverse are reflected across the line y = x.
Connsider a function f(x).
The inverse of function f(x) is represented as f^-1(x).
The inverse of a function is a function that reverses the effect of the original function.
We know that if we take the inverse of function then the domain of a function will be the range of inverse function and the range of a function will be the domain for its inverse.
This means if the point (3, -6) is in the original function then itwill be represented by the point (-6, 3) in the inverse function.
Also, we can obtain the graph of an inverse function as a reflection of the graph of original function across the line x = y.
Hence, the inverse functions' graphs are reflections over the line x = y
Learn more about the graph here:
https://brainly.com/question/11950136
#SPJ4
What is the slope of the line that passes through the points (2, 8)(2,8) and (12, 20)(12,20)? Write your answer in simplest form.
The slope of the line that passes through the points (2,8) and (12, 20) is 6/5.
What is the Slope of a Line?The value of the steepness or the direction of a line in a coordinate plane is referred to as the slope of a line, also known as the gradient. Given the equation of a line or the coordinates of points situated on the straight line, slope can be determined using a variety of approaches.Given the coordinates of two points on the line, use the slope formula to determine the slope of the line. The slope formula, or the ratio of the change in the y values to the change in the x values, is m=(y2-y1)/(x2-x1).given :
points (2,8) and (12, 20)
slope = m=(y2-y1)/(x2-x1).
= 20-8 / 12-2
= 12/10 =6/5
the slope of the line that passes through the points (2,8) and (12, 20) is 6/5.
To learn more about slope of the line refer,
https://brainly.com/question/16949303
#SPJ1
Answer:
6/5
Step-by-step explanation:
What is an expression 6th grade?
Answer:
An expression is a group of terms with an operation performed on them.
TL;DR:
An expression is an equation without an equal sign (=).
Examples:
[tex]\frac{(4x+2y)}{10}[/tex]
[tex]2y-5[/tex]
[tex]3x+2y+z[/tex]
Is 2x 3y a binomial?
2x + 3y is a binomial is a true statement.
A polynomial is of various types like binomial, trinomial and multinomial.
Monomial is said to contain only one term, trinomial is said to contain exactly three terms, multinomial contains n number of terms.
An mathematical expression known as a binomial has exactly two terms.
Examples of binomials are 4x² + 5y², xy² + y, x² + 3, x + y, etc.
Here, the given algebraic expression is 2x + 3y, where 2x is one term and 3y is another term. The coefficient of x is 2 and coefficient of y is 3 where as the exponent of x is 1 and the exponent of y is 1.
To know more about binomials:
https://brainly.com/question/30053602
#SPJ4
At which roots does the graph cross the x axis 0?
the root is zero when the graph crosses the X-axis.
what is root?The word root used in mathematics to express a solution of equation.
The root is written in a number or algebraic form.
What happens when graph cross the x axis?When graph crosses the x axis the root of an equation become zero.
hence, we get zero value while crossing the X-axis
to learn more about graph visit:
https://brainly.com/question/25184007
#SPJ4
you are designing a marble planter for a city park. you want the length of the planter to be six times the height, and the width to be three times the height. the sides should be one foot thick. because the planter will be on the sidewalk, it does not need a bottom. what should the outer dimensions of the planter be if it is to hold 4 cubic feet of dirt?
Answer: 6 ft by 3 ft by 1 ft
Step-by-step explanation:
it already shows the outer dimension in the world problem just need to put it into numbers
What is the y-intercept of Y =- 2x 6?
Answer:
y-intercept: 6
Step-by-step explanation:
Y = -2x 6
The equation is y = mx + b
m = the slope
b = y-intercept
So, the y-intercept is 6
How do you describe the transformation of a function?
The transformation of function is the process of modifying the existing graph of a function.
We know that in a function transformation, the graph of parent function either moves to left/right/up/down or resizes or reflects. There types of function transformations are: Translation, Dilation and Reflection
There are two types of translations of functions.
1) Horizontal translations: a function y = f(x) into the form y = f(x ± m)
if m > 0, then the function f(x ) moves to the left side by 'm' units.
if m < 0, then the function f(x) moves to the right by 'm' units.
2) Vertical translations: a function y = f(x) into the form f(x) ± m
if m > 0, then the function f(x) moves up by 'm' units.
if m < 0, then the function f(x) moves down by 'm' units.
Similarly there are two types of dilations.
1) Horizontal Dilation: a function y = f(x) into the form y = f(kx)
2) Vertical Dilation: a function y = f(x) into the form y = k f(x)
In both the cases, if k > 1, then the graph stretches and if 0 < k < 1, then the graph shrinks.
In case of reflection transformation of function y = f(x),
y = - f(x) is the reflection with respect to the x-axis and y = f(-x) is reflection with resepct to the y-axis.
Therefore, in a function transformation, the original graph of function either moves to left/right/up/down or resizes or reflects.
Learn more about the transformation here:
https://brainly.com/question/10612449
#SPJ4
1. What does the trend look like
2. Do the variables show a positive, negative correlation? Or is there no apparent relationship between them
Answer:
No relationship
Step-by-step explanation:
Rearrange the formula and solve for r.
Answer:
Step-by-step explanation:
The formula of Volume of the Cone, V = 1/3πr^2h
Now, r^2 = 3v/πh
r = √(3v/ πh)
24) Use approximation to find the square root of the given number to the nearest hundredth.
√20
Answer:
The square root of 20 is 4.472.
Step-by-step explanation:
A, B and Care points on the circumference of a circle with centre O.
LACB = 74°
74
Diagram not drawn to scale
Calculate the value of x.
(4 marks)
0x =
Submit Answer
O
Answer:
x = 16°
Step-by-step explanation:
AOB = 74 · 2 = 148°
triangle AOB is isosceles
2x + 148 = 180
2x = 180 - 148
2x = 32
2/2 x = 32/2
x = 16°
Are quadrilaterals 11 sides?
Therefore , the 11 sides polygon cannot be a quadrilateral.
Describe quadrilateral.A polygon with four sides, four angles, and four vertices is referred to as a quadrilateral. A sort of polygon called a quadrilateral has sides that are defined in a certain way. The quadrilateral in the illustration below, for instance, can be defined as ABCD, ADCB, BCDA, CDAB, etc.
Here,
the quadrilateral
Each of them consists of four vertices.
Each side consists of four sides.
360 degrees is the sum of all interior angles.
Two diagonals are present.
There are both regular and irregular quadrilaterals.
It must have four equal sides, four equal angles, and diagonals that cross in order to be regarded as a quadrilateral.
Therefore , the 11 sides polygon cannot be a quadrilateral.
To know more about quadrilateral , visit
brainly.com/question/13805601
#SPJ4
Solve the system by substitution. y= y= \,\,-2x −2x y= y= \,\,-6x+36 −6x+36
The solution to the system of equations, y = -2x and y = -6x + 36, is: (9, -18).
How to Solve a System of Equations by Substitution?Given the following equations of the system as:
y = -2x --> eqn. 1
y = -6x + 36 --> eqn. 2
To solve, substitute y = -2x into equation 2:
-2x = -6x + 36
Solve for x
-2x + 6x = 36
4x = 36
x = 9
To find the value of y, substitute x = 9 into equation 1:
y = -2(9)
y = -18
The solution is: (9, -18).
Learn more about the system of equations on:
https://brainly.com/question/13729904
#SPJ1
The equation and graph show the distance traveled by a minivan and a puck truck in miles, y, as a function of time in hours, x.
The rate of change of the pickup is greater than the rate of change of the minivan
How to compare the rates of change?From the question, we have the graph that can be used in our computation:
On the graph, we have the following points
(x, y) = (0, 0) and (1, 50)
The equation of the proportional relationship is then calculated as
y = Y/X * x
Where
(X, Y) = (1, 50)
Substitute the known values in the above equation, so, we have the following representation
y = 50/1 * x
Evaluate
y = 50x
This means that the rate of the pickup is 50 miles per hour for the pickup
For the minivan, we have
y = 45x
This means that the rate of the pickup is 45 miles per hour for the minivan
50 is greater than 45
Hence, the rate is greater
Read more about proportional relationship at
brainly.com/question/14425347
#SPJ1
What is (2x^2 + 6x − 1) subtracted
from (2x^3 − 3x + 2)?
Answer:
2x^3 - 2x^2 - 9x + 3
Step-by-step explanation:
(2x^3 − 3x + 2) - (2x^2 + 6x − 1) =
2x^3 − 3x + 2 - 2x^2 + (-6x) − (-1) = ==> distribute the negative sign to 2x^2,
6x, and -1 in (2x^2 + 6x − 1)
Adding a negative number is equivalent to subtracting by a positive number.
Subtracting a negative number is equivalent to adding by a positive number.
Hence:
2x^3 − 3x + 2 - 2x^2 - 6x + 1 =
2x^3 - 2x^2 - 3x - 6x + 2 + 1 = ==> rearrange the expression in which like
terms are matching
2x^3 - 2x^2 - 9x + 3 ==> simplify
How do you tell if a limit is coming from the right or left?
To tell if a limit is coming from the right or left, you need to look at the sign of the x-value in the limit equation. If the x-value is positive, the limit is coming from the right. If the x-value is negative, the limit is coming from the left.
To determine which side a limit is coming from, you must first examine the x-value in the limit equation. If the x-value is positive, then the limit is coming from the right side. This is because when the x-value is positive, it is approaching from the positive side of the number line. On the other hand, if the x-value in the limit equation is negative, then the limit is coming from the left side. This is because when the x-value is negative, it is approaching from the negative side of the number line. It is important to note that the sign of the x-value in the limit equation indicates which side the limit is coming from.
Learn more about equation here
https://brainly.com/question/29657992
#SPJ4
Multiple choice math
The only graph that correctly shows the given piecewise function is; Graph B
How to interpret Piecewise functions?It is pertinent to note that when it comes to piecewise functions and inequalities, a closed, or shaded circle is typically used to represent the inequalities greater than or equal to (≥) or less than or equal to (≤) . However, an open, or unshaded circle is typically used to represent the inequalities greater than or less than.
Now, the first part of the piecewise function states that;
f(x) = x + 1 if x < 1
Thus, it will be an unshaded circle pointing to the left direction indicating less than.
The second inequality says 4 provided that x ≥ 1.
Thus;
The line will be a horizontal line pointing right with a shaded circle. Therefore we conclude that only option B is correct.
Read more about Piecewise functions at; https://brainly.com/question/27262465
#SPJ1
What additional information is needed for an AAS congruence theorem?
You must be aware that pairs of two angles are congruent as well as the pair of sides that are next to one of the specified angles in order to utilize the AAS Theorem to verify congruence.
Triangles are said to be congruent if two of their matching angles and one of their excluded sides are congruent with those of two other triangles. Because it can be demonstrated, this is a theorem.
The AAS Theorem uses two angles and a side to demonstrate triangle congruence, just as the ASA Postulate. The letters are arranged differently from the angles and sides they represent.
To learn more about congruence here:
https://brainly.com/question/29185992
#SPJ4
1) Colette is building a doll house that is similar to her real house. She measures her front
door to be 240 centimeters tall and 100 centimeters wide. She decides that she wants
the height of the front door on her doll house to be 10 centimeters.
[4 points] Explain, using complete sentences, how she could find the width of the front
door of the doll house. Be sure to discuss the measurements she needs AND how she
would use these measurements to find the width of the doll house's front door.
The width of the doll house's front door is 2400 cm.
How to find area of Rectangle?The area of the rectangle is
(240 cm x 100 cm) / 2
= 2400 cm
Rectangle area in geometry refers to the area that a rectangle occupies on a two-dimensional plane. A quadrilateral, a form of two-dimensional object with four sides and four vertices, is what a rectangle is. The rectangle's four angles are all right angles or exactly 90 degrees. The rectangle's opposing sides are equal and parallel to one another. It should be noted that a parallelogram likewise has equal and parallel opposite sides, but the angles are not exactly 90 degrees. The dimensions of a rectangle determine its area. In essence, the area of a rectangle is equal to the sum of its length and breadth. whereas the perimeter of a rectangle is equal .To learn more about area of Rectangle refer to:
https://brainly.com/question/2607596
#SPJ1
What is equidistant from both endpoints?
In geometry, the midpoint is the middle point of a line segment. It is equidistant from both endpoints, and it is the centroid both of the segment and of the endpoints.
A point is said to be equidistant from a set of objects if the distances between that point and each object in the set are equal.
In two-dimensional Euclidean geometry, the locus of points equidistant from two given (different) points is their perpendicular bisector. In three dimensions, the locus of points equidistant from two given points is a plane, and generalising further, in n-dimensional space the locus of points equidistant from two points in n-space is an (n−1)-space.
Learn more about equidistant to visit this link
https://brainly.com/question/29634493
#SPJ4
A guidance counselor wants to determine if there is a relationship between a student’s number of absences, x, and their grade point average (gpa), y. the given data list the number of absences and gpas for 15 randomly selected students. using technology, what is the value of r2? a. –0.56
b. –0.32
c. 0. 32
d. 0.56
Linear regression is used to model the linear relationship between two variables and r2 measures the strength of this relationship. It is calculated by squaring the correlation coefficient, which is a measure of the strength and direction of the relationship.
To determine the value of r2, you can use technology to perform a linear regression analysis on the given data. Linear regression is a statistical method used to model the linear relationship between two variables, x and y. The value of r2, also known as the coefficient of determination, measures the strength of the relationship between x and y and indicates how well the model fits the data.
The value of r2 is calculated using the following formula:
r2 = (Correlation coefficient)2
The correlation coefficient, also known as the Pearson correlation coefficient, is a measure of the strength and direction of the relationship between two variables. It is calculated using the following formula:
r = ∑(x - x')(y - y') / √[∑(x - x')2 ∑(y - y')2]
where x' and y' are the means of the x and y variables, respectively, and ∑ indicates the sum of the values.
To determine the value of r2, you would first need to calculate the correlation coefficient using the given data. Once you have calculated the correlation coefficient, you can then square it to get the value of r2.
To learn more about Linear regression, visit:
brainly.com/question/29665935
#SPJ4
You can use technology to do a linear regression analysis on the supplied data to find the value of r2. A statistical technique called linear regression is used to simulate the linear relationship between two variables, x and y. The strength of the link between x and y is measured by the coefficient of determination, or r2, which also serves as a measure of how well the model fits the data.
The value of r2 is calculated using the following formula:
r2 = (Correlation coefficient)2
The correlation coefficient, also known as the Pearson correlation coefficient, is a measure of the strength and direction of the relationship between two variables. It is calculated using the following formula:
r = ∑(x - x')(y - y') / √[∑(x - x')2 ∑(y - y')2]
where x' and y' are the means of the x and y variables, respectively, and ∑ indicates the sum of the values.
You must first compute the correlation coefficient using the provided data in order to obtain the value of r2. Once the correlation coefficient has been determined, you can square it to obtain the value of r2.