Which statement is true about the pricing model on AWS? (Select the best answer.) In most cases, there is a per gigabyte charge for inbound data transfer. Storage is typically charged per gigabyte. Compute is typically charged as a monthly fee based on instance type. Outbound charges are free up to a per account limit.

Explanation suggests that the MST will not be the same as T when it converts to T.

A minimum spanning tree (MST) for a weighted, connected and undirected graph is a spanning tree with weight less than or equal to the weight of every other spanning tree.

The new weight will be smaller than the original weight, or wnew < wnew, if we precisely lower the weight of one edge (let's say e).

There may now be two cases. - The modified edge e is a part of T and is a member of the MST. Since e is already a component of T, reducing its weight will also reduce the MST's weight. Consequently, the modified MST T is the same as the present MST T. (but with reduced weight by c).

The modified edge e does not belong to the MST since it is not a component of T. This might alter the existing MST since another MST that includes the updated edge e might exist with a lower weight. The MST does not change, thus if we find a situation where this is not the case, our assumption would be erroneous and T would not be the MST. This may be demonstrated by contradiction.

We may use the cyclic property of MST, which states that in order to obtain an MST, we need to eliminate the edge with the biggest weight in the cycle. The red edge in this graph was not included in the MST, hence its weight was reduced. The MST and the red edge combine to create a graph with a cycle. Using the cyclic property, subtract the cycle C's strongest edge to obtain the adjusted MST. O(V) time (where |V| is the number of vertices) can be used to complete this.

This suggests that the MST will not be the same as T when it converts to T.

Therefore, T will not surely be the MST if we reduce the weight of exactly one of the edges in G by a constant c as described by point 2.

To learn more about the minimum spanning tree (MST);

https://brainly.com/question/15966617

#SPJ4

The moment of inertia of the pendulum about an axis perpendicular to the page and passing through G will be 1.5 kgm².

A pendulum is a weight suspended from a pivot so that it can swing freely. The motion of a pendulum is a type of simple harmonic motion, which means that the pendulum moves back and forth in a regular, periodic fashion. The moment of inertia of an object is a measure of the object's resistance to change in its rotational motion.

To determine the location of the center of mass of the pendulum, we need to find the mass of each part and the distance from the center of mass of each part to point G.

The mass of rod AB is 3 kg/m * 1 m = 3 kg

The mass of rod OC is also 3 kg/m * 1 m = 3 kg

The mass of the plate is 12 kg/m2 * 1  = 12 kg

The distance from the center of mass of rod AB to point G is 0.5 m (since the rod is 1 m long and point G is at the midpoint of the rod)

The distance from the center of mass of rod OC to point G is also 0.5 m

The distance from the center of mass of the plate to point G is 0.5 m (since the plate is 1 m wide and point G is at the midpoint of the plate)

Now we can use the formula for the location of the center of mass:

yG = (3 kg * 0.5 m + 3 kg * 0.5 m + 12 kg * 0.5 m) / (3 kg + 3 kg + 12 kg) = 0.5 m

To calculate the moment of inertia of the pendulum about an axis perpendicular to the page and passing through G, we can use the formula for the moment of inertia of a rod about its center of mass:

[tex]I = (1/12) * m * L^2[/tex]

For rod AB:

[tex]I = (1/12) * 3 kg * (1 m)^2 = 0.25 kg*m^2\\[/tex]

For rod OC:

[tex]I = (1/12) * 3 kg * (1 m)^2 = 0.25 kg*m^2[/tex]

For the plate:

I = (1/12) * 12 kg * (1 m)^2 = 1 kg*m²

The total moment of inertia of the pendulum is the sum of the moments of inertia of the individual parts:

I = 0.25 kgm^2 + 0.25 kgm^2 + 1 kgm^2 = 1.5 kgm²

Learn more about moment of inertia of a pendulum, here https://brainly.com/question/29585112

#SPJ4

Using the principle of substitution, the value of the expression given is 162.

The sampler has an outer diameter of 51 mm and is driven into the soil using a 63.5 kg weight that has a 760 mm free fall.One ignores the top 150 mm of soil.The test is the following 300 mm of soil.

Given the expression :

   6x⁴y³

x = -1 ; y = 3

Substituting the values into the expression :

6(-1)⁴(3)³

   -1⁴ = - 1 × - 1 × - 1 × - 1 = 1

   3³ = 3 × 3 × 3 = 27

6(1)(27) = 6 × 1 × 27 = 162

Hence, the value of the expression is 162.

Using the principle of substitution, the value of the expression given is 162.

To learn more about standard penetration test refer

https://brainly.com/question/11388301

#SPJ4

1) the number that Albert thought of is 0.5

2) The computing appliance that blocks and filters unwanted network traffic is "Firewalls" (Option A)

3) If you're driving one and a half miles per minute, slow down by 15 miles per hour, and then reduce your speed by one-third, the speed you are traveling at is 50 miles/hour (Option C)

4) The subsection of the internet that requires specialized browsers to access and is frequently used by cybercriminals and underground subcultures is: "Dark Web" (Option C)

1) To get the answer to question 1, we need to assume that the number that Albert thought of is x. Thus, the expression for the problem is given as:

(x+5)*2-6/2 = 8

First, we simplify the equation:
(x+5) (2) - 6/2 = 8

⇒ (x) (2) + (5) (2) + (-3) = 8

⇒ 2x + 10 + (-3) = 8

⇒ 2x + (10 + (-3)) = 8

⇒ 2x + 7 = 8

⇒ 2x + 7 -7 = 8-7

⇒ 2x =1

⇒ 2x/2 = 1/2

Hence.

x = 1/2 0r 0.5

2) Note that a firewall is a security system that controls the incoming and outgoing network traffic based on predetermined security rules.

3) To get the speed at which one is moving,

The initial speed = 1.5 miles per minute

= 1.5 x 60

= 90mph

If it slows down by 15 mph and then reduces speed have

90-15

= 75mph

Then it reduced by one third

= 1/3 x 75 = 25

Hence the speed at which one is going is:

75-25 = 50 miles/Hr

4) The dark web is a part of the internet that is not indexed by search engines and is not accessible through standard web browsers. It can only be accessed using specialized software such as The Onion Router (TOR).

Learn more about Darkweb:
https://brainly.com/question/29487642?
#SPJ1

You must first divide the area into several smaller shapes, the centroids of which are easier to determine, in order to find the centroid of the shaded area indicated in Prob. F9-1.

This can be done by drawing lines to divide the area into triangles and rectangles, as shown in the figure below:

[asy] /* Made by MRENTHUSIASM */ size(8cm); draw((0,0)--(1,0)--(1,1)--(0,1)--cycle); draw((1,0)--(1.5,0.5)--(1,1)); draw((0,0)--(0.5,0.5)--(0,1)); draw((0.5,0.5)--(1.5,0.5),dashed); draw((0.75,0)--(0.75,0.5),dashed); draw((0,0.5)--(1,0.5),dashed); label("$x$",(0.75,0),S); label("$y$",(0,0.5),W); [/asy]

Once the area has been divided, you can use the following formulas to determine the centroid of each smaller shape:

For a triangle:

$x = \frac{x_1 + x_2 + x_3}{3}$

$y = \frac{y_1 + y_2 + y_3}{3}$

where $(x_1,y_1)$, $(x_2,y_2)$, and $(x_3,y_3)$ are the coordinates of the three vertices of the triangle.

For a rectangle:

$x = \frac{x_1 + x_2}{2}$

$y = \frac{y_1 + y_2}{2}$

where $(x_1,y_1)$ and $(x_2,y_2)$ are the coordinates of two opposing vertices of the rectangle.

Once you have determined the centroids of all the smaller shapes, you can then use the following formula to determine the centroid of the entire shaded area:

$x = \frac{\sum_i A_i x_i}{\sum_i A_i}$

$y = \frac{\sum_i A_i y_i}{\sum_i A_i}$

where $A_i$ is the area of the $i$th smaller shape and $(x_i,y_i)$ is the centroid of the $i$th smaller shape.

To know more about Centroid kindly visit
https://brainly.com/question/10708357

#SPJ4

You want to be an engineer but don't have an undergraduate degree in engineering. Can you still pursue the profession? The short answer is yes, but you will almost certainly want to return to school—either for a bachelor's or master's degree—to broaden your engineering career options.

Consider Your Engineering Career Options:

So you've decided to study engineering, and now you must figure out how to become an engineer. Changing careers later in life can be extremely rewarding, but you should consider the financial and personal sacrifices you may have to make. To become an engineer, you essentially have two options:

To know more about engineering discipline, visit: https://brainly.com/question/20466699

#SPJ4

A non-six-legged animal that eats a six-legged animal does not exist. Using existential generalization, it is possible to infer from the stated premises that there is a non-insect that eats an insect.

A valid method of inference in predicate logic that enables one to proceed from a specific statement, or one instance, to a quantified generalized statement, or existential proposition, is known as existential generalization (also known as existential introduction, or I).

When something is true of everything, it must also be true of the specific thing that the constant c names. This is known as universal instantiation. When making existential generalizations, it is important to remember that if anything is true of if c is a specific constant, then it applies to at least something.

To know more about existential generalization visit:-

https://brainly.com/question/24067769

#SPJ4

Measure of Restitution When the velocity vectors of two objects are parallel, direct collisions between them happen. While energy is lost during the impact when one or both of the objects are bent.

v 2−v 1=−e(u 2−u 1). This equation represents Newton's law of restitution. The restitution coefficient always meets the condition 0e1. The balls stay in contact with one another after a collision when e=0.

It is crucial to understand the coefficient of restitution since it establishes whether a collision is elastic or inelastic in nature. Whether a collision is elastic or not reveals whether there is any kind of kinetic energy loss as a result of the impact.

To know more about coefficient of restitution visit :-

https://brainly.com/question/29422789

#SPJ4

The study of computer programs that allow mathematical models and algorithms to recognize patterns and understand concepts without explicit programming is known as machine learning. Over the past ten years, the field of machine learning has advanced significantly.

Without being specifically programmed to do so, machine learning (ML), a subset of artificial intelligence (AI), enables software applications to improve their propensity to predict outcomes. Algorithms that use machine learning predict new values by using historical data as input.

A typical use case for machine learning is recommendation engines. Other common applications include business process automation (BPA), predictive maintenance, spam filtering, malware threat detection, and fraud detection.

Machine learning is significant because it helps companies develop new products by providing insights into consumer behavior trends and operational business patterns. For numerous businesses, machine learning has significantly increased their competitive edge.

Learn more about machine learning

https://brainly.com/question/25523571

#SPJ4

A data warehouse is created specifically for data analytics, which includes scanning vast amounts of data to recognize patterns and relationships.

A database is used to collect and store data, including transactional information. Enterprise Data Warehouse (EDWH) is another name for Data Warehouse (DWH) (EDW). A data warehouse is a central location where information from one or more data sources is stored. Enterprise Data Warehouse (EDW), Operational Data Store (ODS), and Data Mart are the three primary types of data warehouses. A data warehouse acts as a repository for old information that may be analyzed. Data in a warehouse can be examined and evaluated using online analytical processing, or OLAP.

Learn more about data warehouse here:-

https://brainly.com/question/14615286

#SPJ4

Answer:

To determine the differential height of water between the two sections of the pipe, we need to consider the conservation of energy and the ideal gas law.Conservation of energy:

The first law of thermodynamics states that the increase in internal energy of a system is equal to the heat added to the system, minus the work done by the system. In this case, the internal energy of the air flowing through the pipe increases as it is compressed in the neck of the pipe, causing its temperature to increase.The increase in internal energy can be expressed as:ΔU = Q - Wwhere ΔU is the change in internal energy, Q is the heat added to the system, and W is the work done by the system.Ideal gas law:

The ideal gas law states that the pressure of an ideal gas is directly proportional to its temperature and inversely proportional to its volume. This can be expressed as:PV = nRTwhere P is the pressure, V is the volume, n is the number of moles of gas, R is the universal gas constant, and T is the temperature.Solution:

To determine the differential height of water between the two sections of the pipe, we need to use the conservation of energy and the ideal gas law to relate the pressure difference between the two sections to the temperature difference and the flow rate of the air.First, let's convert the flow rate of the air from liters per second to cubic meters per second:200 L/s = 0.2 m3/sNext, we can use the ideal gas law to express the pressure difference between the two sections in terms of the temperature difference and the flow rate:ΔP = (nRT1 - nRT2)/V = (1.20 kg/m3 * 8.31 J/(molK) * 298 K - 1.19 kg/m3 * 8.31 J/(molK) * 303 K)/(0.2 m3/s)ΔP = -27.7 PaFinally, we can use the conservation of energy to express the differential height of water in terms of the pressure difference and the flow rate:Δh = ΔP/ρg = (-27.7 Pa)/(1000 kg/m3 * 9.81 m/s2) = -0.28 mTherefore, the differential height of water between the two sections of the pipe is -0.28 m.Note that the negative sign indicates that the pressure is lower in the second section of the pipe, which is consistent with the fact that the temperature is higher and the volume is lower in this section.

Explanation:

There are several different ways to design an active filter that will provide the necessary frequency response and gain for Mandy's needs. Here is one possible design:

By cascading these three stages together, you can create an active filter that will provide the necessary frequency response and gain for Mandy's needs.

This is just one possible design, and there are many other ways to achieve the same result. It will be up to Mandy to decide which design is best suited for her specific needs and requirements.

Learn more about medication, here https://brainly.com/question/28335307

#SPJ4

The producer-consumer paradigm is a type of programming technique that involves two separate processes which communicate with one another in order to achieve a desired result.

What is producer-consumer paradigm?
The producer-consumer paradigm is a computer programming model in which producers create and store data in a shared buffer, while consumers retrieve and use the data. The paradigm is based on the idea that producers and consumers are separate entities and that each has its own thread of execution. This separation allows for the asynchronous transfer of data between producers and consumers. The producer-consumer paradigm is used in many applications, including operating systems, databases, and distributed computing. In the producer-consumer paradigm, the producer thread produces data and places it in a shared buffer. The consumer thread then retrieves the data from the buffer and uses it. In order to ensure that the producer and consumer threads do not interfere with each other, the producer must wait until the consumer has finished using the data before producing more. This is done by using synchronization mechanisms such as semaphores, monitors, and message queues.

The producer creates items (in this case, a list of the squares of all integers until a given upper bound), and the consumer processes them (in this case, by summing them together).
To use this paradigm to generate the sum of squares of all integers until a given upper bound, we need to define two functions: the producer and the consumer.
The producer will take two inputs: n, the current number being processed, and limit, the upper bound. The production function should check if n is at or below the limit, and if so, it should create a list containing the square of n. If n is greater than the limit, it should return an empty list.
The consumer will take in a single input, which should be the list created by the producer. The consumer should iterate through the list and sum up the values inside. It should then return the sum.
Once those functions have been defined, we can create a loop which calls the producer to generate lists until it reaches the upper bound, and then passes those lists to the consumer for processing. Once the loop is complete, the consumer will have returned the sum of squares of all integers until the given upper bound.

To learn more about producer-consumer paradigm
https://brainly.com/question/29547660
#SPJ4

Answer:

SELECT Name, Marks FROM Student s1 where 3 <= (SELECT COUNT(*) FROM Students s2 WHERE s1.marks = s2.marks)

It is to be noted that only these people are allowed to attend Sprint Retrospective are: "Scrum master and Development team" (Option A)

The Sprint Retrospective is a meeting that takes place at the conclusion of each sprint in Scrum. It allows the Scrum team to reflect on the previous sprint and identify methods to enhance the process in the future.

It's aim is to identify what went well during the sprint, what may be improved, and how to achieve those improvements in the future. It is an essential component of the Scrum framework since it ensures that the team is always developing and changing to meet the demands of the project.

Learn more about Scrum Retrospective:
https://brainly.com/question/29681602
#SPJ1

A situation which best describes the chemical weathering process of sedimentary rock include the following: D. Sedimentary limestone is exposed to acid rain at the top of a mountain.

In Geology, weathering can be defined as a biogeochemical process that involves both the physical and chemical breakdown of rock into smaller pieces or fragments called sediments.

Additionally, weathering is broadly classified into two (2) categories and these include the following;

During the chemical weathering process of sedimentary rock, sedimentary limestone that are found at the top of a mountain become exposed to acid rain.

Read more on weathering here: brainly.com/question/829782

#SPJ1

To compile the lex.yy.c file generated by flex, you can use the command: gcc lex.yy.c -o scanner.

This command will compile the lex.yy.c file and generate a scanner executable file.

What is compile?
Compiling is the process of taking source code written in a programming language, such as Java, and converting it into a format that can be read and executed by a computer. The compiled code is usually referred to as an executable, which is a file that contains a set of instructions that can be run by a computer. Compiling source code is a crucial step in the development of any software program or application. Compiling source code allows developers to create efficient and reliable programs that are optimized for specific hardware and operating systems. Additionally, compiling source code allows for faster execution of the program, since the computer does not need to interpret the source code each time the program is run. Furthermore, compiling source code can make it easier to debug and improve the code, since errors are easier to catch in the compiled form.

To learn more about compile
https://brainly.com/question/13884748
#SPJ4

Code reviews, often known as peer reviews, serve to ensure the quality of the code base. Code reviews are rigorous analyses of code that are intended to detect flaws, improve code quality, and assist engineers in learning the source code.

To hold a subject accountable, the system must first approve the subject before recording the subject's behavior.

"White box testing" allows the auditor to have complete knowledge of the internals of the system(s) under test at the time the tests are devised or selected.

Because audit results may affect the customer's purchasing decisions, second-party audits are more formal than first-party audits. A third-party audit is carried out by an audit agency that is independent of the customer-supplier relationship.

User Account Review is the most critical business process to analyze in order to determine why the gaps exist and how they may be remedied utilizing a policy-based solution.

Learn more about code here:

https://brainly.com/question/14549538

#SPJ4

Here is the list of all variables, along with the program unit where they are declared, that are visible in the bodies of sub1, sub2, and sub3:

Information that needs to be accessed and changed by a computer programme is stored in variables. In order to make our programmes more understandable to ourselves and the reader, they also offer a way to label data with a descriptive name.

To understand variables better, think of them as data storage units. Labeling and archiving data in memory is their only function. When used throughout your programme, this data will be useful.

One of the most challenging aspects of computer programming is naming variables. Be very careful when choosing names for your variables. Make every effort to name your variable something that is both accurate and clear to another reader.

Learn more about variable

https://brainly.com/question/28592557

#SPJ4

Answer:

1. C

2. B

3. A

4. B

Explanation:

A business would use a website analytics tool for all of the following EXCEPT _____.

C: viewing why someone visited your webpage

After creating a webpage with HTML code, what do you need to do so that others can access it on the Internet?

B: Publish to a web server

An Integrated Development Environment (IDE) stores files and folders for your website in a directory called _____.

A: a project

Anita is developing a website for her photography business. On the home page, she wants to include a link to another webpage in her website. What type of link should she insert?

B: relative reference

The vorticity field for the following vector in the question is 0.

The step by step explanation of the calculation is given in the figure attached below. The term "vorticity" refers to a pseudovector field that depicts the tendency for anything to rotate or the local spinning motion of a continuum near a point as observed by an observer standing at that location and moving with the flow. It is a significant quantity in the dynamical theory of fluids and offers a useful foundation for comprehending a number of intricate flow phenomena, such as the development and motion of vortex rings. The vorticity, for instance, is two times the angular velocity vector of the rotation in the central core of a Rankine vortex, which is a mass of continuum revolving like a rigid body. If there is shear, the vorticity could still be non-zero even if all particles are moving in a straight, parallel line.

To learn more about vorticity click here

brainly.com/question/13091124

#SPJ4

Answer:

Explanation:Step 1: Decide where to place the router. ...

Step 2: Connect to the Internet. ...

Step 3: Configure the wireless router gateway. ...

Step 4: Connect gateway to router. ...

Step 5: Use app or web dashboard. ...

Step 6: Create a username and password. ...

Step 7: Update the router's firmware. ...

Step 8: Create a Wi-Fi password.

Answer:

zzzzzzzzzzzzzzzzzzzzzzzz

The moment of the force along the x, y and z coordinates are 0, 100Nm and -100Nm respectively.

Moment of a force is the measure of its tendency to cause a body to rotate about a specific point or axis. It is equal to the product of the magnitude of the force and the perpendicular distance of the line of action of the force from the point or axis.

The formula of moment of a force is given as

Moment = force * distance

M = f * d

The moment about the axis can be calculated as

Moment about the x axis:

M = 4 * 0

M = 0Nm

Moment about the y axis:

M = 4 * 25  = 100 Nm

Moment about the z axis:

M = 4 * -25

M = -100Nm

Learn more on moment of a force here;

https://brainly.com/question/27282169

#SPJ1

Electronic rack-and-pinion systems use an electric motor to pump the hydraulic fluid through the hoses. This statement is true.

The rack and pinion gearset is housed inside a metal tube, with each end of the rack protruding out and being attached to an axial rod. This is how it operates. When the steering wheel is twisted, the rack is moved by the pinion gear, which is mounted to the steering shaft. Based on the torque being given to the steering wheel by the driver, the steering wheel position, and the vehicle's speed, the EPS electronic control unit (ECU) determines the amount of aiding power required. With an applied force, the EPS motor rotates a steering gear, lowering the driver's necessary torque.

Learn more about hydraulic fluid here:-

https://brainly.com/question/30037453

#SPJ4

The values obtained for R and E1 after solving the given circuit will be equal to 1 ohm and 38 V.

Charged material experiences a force when exposed to an electromagnetic field because of the fundamental characteristic of electric charge. It's conceivable for electrical ions to be positive or negative. Two charges that are opposed to one another repel one another.

As per the given data in the question,

Vp= 26V and,

E₂ = 24V

V₂ = 26-24

= 2V

Given, R will lose 345.6KJ of energy in a day.

We must determine the energy wasted by R in 1 second in order to determine the power dissipated across R.

So,

PR = (345.6x103)J / (24x3600)sec

= 4 Watts

Also,

PR = I₂ x R

4 = I₂R          (1)

V₂ = Voltage across R = 2V

2 = I x R

I = 2/R          (2)

Substitute equation (2) in equation (1) we get

4 = 4/R

R = 1 ohm.

I = 2 ampere

Six ohms of resistance will not block the same current. So,

V₁ = 2X6

= 12 Volts

So,

Now, Apply KVL in the circuit,

E₁ = V₁ + Vp

= 12 + 26

E₁ = 38 V

To know more about Electrical Energy:

https://brainly.com/question/16182853

#SPJ1

Get Book Mo EE The Easy Restore feature to restore Service tags, licenses, and UEFI configuration is available in Rugged Latitude. The statement is True.

The traditional BIOS has been updated with UEFI, which provides assistance for larger hard drives, faster installation times, and additional security features. A new protocol for OS and platform firmware communication is also introduced.

After upgrading the system board, one can recover your service tag, license, UEFI settings, and system configuration data using the easy restore option. Every piece of data is automatically stored on a backup flash drive.

Therefore, the statement is True.

Learn more about UEFI configuration, here:

https://brainly.com/question/27961231

#SPJ4

count ← 0

REPEAT 4 TIMES

{

count count + 1

REPEAT count TIMES

{

MOVE_FOWARD ()

}

ROTATE_LEFT ()

}

The message is broken into bundles that are communicated in a predefined request. Every bundle should be gotten in the request it was sent for the message to be accurately reassembled by the beneficiary's gadget.

A user installs a program on their computer that records and transmits all user input unintentionally.

To know more about code segments visit :-

https://brainly.com/question/26683418

#SPJ4

Using the knowledge of computational language in python it is possible to write a code that There are several books placed in the HackerStudy library.

include<iostream>

using namespace std;

long getMaximumScore(int arr[],int k,int n)

{

long count=0,sum=0;

for(int i=0;i<n-1;i++)

{

 for(int j=0;j<n-i-1;j++)

 {

  if(arr[j+1]>arr[j])

  {

   arr[j+1]=arr[j+1]+arr[j];

   arr[j]=arr[j+1]-arr[j];

   arr[j+1]=arr[j+1]-arr[j];

  }

 }

}

for(int i=0;i<n;i++)

{

 if(count==k)

 return sum;

 else

 {

  sum=sum+arr[i];

  count++;

 }

}

}

int main()

{

int n,k;

cin>>n;

int arr[n];

for(k=0;k<n;k++)

cin>>arr[k]  ;

cin>>k;

cout<<getMaximumScore(arr,k,n);

return 0;

}

See more about C++ at brainly.com/question/18502436

#SPJ1