Write the equation of the line containing the points (-2,4) and (-4, 10)

Answer:

n=5

Step-by-step:

What divided by 10 equals 2? Well, 5 does. So, when you divide the exponents, it will equal the other side.

The leading coefficient and the constant term must both be divisible by the fraction's denominator in order to factor using the rational root theorem.

In plants, a stem's primary role is to aid in the transfer of water and minerals from the roots to the leaves and other sections of the plant. Additionally, it supports the buds, leaves, flowers, fruits, and branches of plants.

The rational root theorem, also known as the rational root test, is an algebraic principle that states that for a polynomial equation with one variable and integer coefficients to have a solution (root) that is a rational number, both the leading coefficient and the constant term must be divisible by the fraction's denominator.

To learn more about rational root theorem link is here

brainly.com/question/9353378

#SPJ4

 The rational root theorem, also known as the rational zero theorem or the rational root test, holds that a single-variable polynomial with integer coefficients has rational roots if and only if constant term and leading coefficients are both divisible by the root's numerator and denominator, respectively.

    A theorem that is applied to polynomial roots is known as the rational root theorem or the rational zero test. The values of the variable that bring the polynomial to zero are known as the roots. Since the number of exact roots for a particular polynomial is always equal to the degree of the polynomial, we can determine this information from the polynomial's degree.

     For a linear polynomial, there is only one root, for instance. The number of zero roots in a cubic polynomial is three, whereas the number of  zero roots in a quadratic polynomial is two.

   f(x)=aₙxⁿ+aₙ₋₁xⁿ⁻¹+aₙ₋₂xⁿ⁻²+a₂x²+a₁x+a₀  where the coefficients aₙ to a₀ are all integers.

To learn more about polynomial visit :

brainly.com/question/4934417

#SPJ4

A theorem that is applied to polynomial roots is known as the rational root theorem or the rational zero test. The values of the variable that bring the polynomial to zero are known as the roots. Since the number of exact roots for a particular polynomial is always equal to the degree of the polynomial, we can determine this information from the polynomial's degree.

f(x)=aₙxⁿ+aₙ₋₁xⁿ⁻¹+aₙ₋₂xⁿ⁻²+a₂x²+a₁x+a₀  where the coefficients aₙ to a₀ are all integers.

Answer:

they are called whole numbers

Step-by-step explanation:

Answer:

2528

Step-by-step explanation:

[tex]32\times79[/tex]

Multiply:

[tex]32\times79[/tex]

[tex]=\fbox{2528}[/tex]

Answer:

10. Some of the class 4 children Amar, Bindu, Charisma, Danny are friends with some of the class 5 children Amar Diana Ekta Raghu Prem. The following table tells us which 2 children are friends with each other.

11. A

12. 20 cm - 2(4cm) = 12

2(6cm length) + 2(4cm width) = 20 cm

12 + 8 = 20 cm

area = length * width

area = 6 * 4

area = 24 cm²

Step-by-step explanation:

The expression can be evaluated using the property of zeros as 0.

An algebraic expression can be obtained by doing mathematical operations on the variable and constant terms.

The variable part of an algebraic expression can never be added or subtracted from the constant part.

The given equation is x³ - 3x + 1 = 0.

Its zeros are given as x₁, x₂ and x₃.

As per the properties of zeros of a cubic equation, the  following expressions can  be written as,

x₁x₂x₃ = Constant term ÷ Coefficient of x³

⇒ x₁x₂x₃ = 1.

And,  x₁x₂ + x₂x₃ + x₁x₃ =  Coefficient of x² ÷  Coefficient of x³

⇒ x₁x₂ + x₂x₃ + x₁x₃ = 0.

Now, the given expression 1/x₁ + 1/ x₂ + 1/x₃ can be evaluated as below,

(x₁x₂ + x₂x₃ + x₁x₃)/x₁x₂x₃  = 0/1

⇒ 0

Hence, the given expression can be evaluated as 0.

To know more about algebraic expression click on,

brainly.com/question/953809

#SPJ4

Answer:

n = 6

Step-by-step explanation:

-15 + n = -9

Add 15 to both sides

n = 6

So, the answer is 6

Answer:

Circumference of the semi-circle is d(π/2 + 1)

Step-by-step explanation:

Circumference of a semicircle is πr + 2r

So, since r = d/2,

therefore, π*d/2 + 2*d/2 = πd/2 + d = d(π/2 + 1).

The multiple inverse of 16 is 0.0625.

1/N or N-1 is used to denote a number's multiplicative inverse, such as the number N. It also goes by the name reciprocal.

Inverse refers to something that is the opposite. The acquired reciprocal of a number is such that its value equals identity 1 when multiplied by the original number. In other terms, it is a technique for producing identity 1 by diluting a number by itself, as in N/N = 1.

Inverse of x = 1/x  or  x⁻¹.

It is also called as the reciprocal of a number and 1 is called the multiplicative identity.

Let the multiple inverse of 16 is x, then

16 * x = 1

⇒ x = 1/16

⇒ x = 0.0625

To learn more about multiple inverse visit:

brainly.com/question/13715269

#SPJ4

You can tell if a graph is positive or negative infinity by looking at the slope of the graph. Positive infinity means the slope is increasing without bound, while negative infinity means the slope is decreasing without bound.

In order to determine if a graph is positive or negative infinity, you need to look at the slope of the graph. Slope is a measure of the steepness of a line and is calculated by looking at the change in y-values divided by the change in x-values. If the slope of the graph is increasing without bound, this means that the graph is approaching positive infinity. On the other hand, if the slope of the graph is decreasing without bound, the graph is approaching negative infinity. This means that the y-values are getting closer and closer to negative infinity as the x-values get larger. You can also look at the graph itself to get an idea of the direction of the graph. If the graph is increasing without bound, the graph is approaching positive infinity, while if the graph is decreasing without bound, it is approaching negative infinity.

Learn more about graph here

https://brainly.com/question/17267403

#SPJ4

The solutions to systems of equations are the variable mappings such that all component equations are satisfied—in other words, the locations at which all of these equations intersect. To solve a system is to find all such common solutions or points of intersection.

A group of equations comprising one or more variables is known as a system of equations. The variable mappings that satisfy each component equation, or the points where all of these equations cross, are the solutions of systems of equations.

Calculating the unknown variables while keeping the equations balanced on both sides is the process of solving a system of equations. Finding the value of the variable that makes the condition of all the provided equations true is how we solve an equation system. There are several ways to solve a system of equations, including

Learn more about system of equations to visit this link

https://brainly.com/question/24065247

#SPJ4

Answer:

Ok So From What You Said I Calculated This:

1:00-2:00

cars=c, trucks=t

answer=a

c x 3 = a

a÷3=t

Step-by-step explanation:

Answer:Ok So From What You Said I Calculated This:

1:00-2:00

cars=c, trucks=t

answer=a

c x 3 = a

a÷3=t

Step-by-step explanation: I rlly hope this helps please mark brainliest thanks for the points! please tell meif im wrong have a good day night!! :)

The total number of yards needed is (4 + 1/4) yards of metal.

In this case, there are two pieces measuring (1 + 1/6) yard and (3/12) yard; adding the two, the total length is:

L = (1 + 1/6) yard + (3/12) yard

= (1 + 2/12) yard + 3/12yardd

= (1 + 5/12) yard

Since three times that amount of metal is needed, then the total amount of metal that is needed is found by multiplying the total length obtained above by three:

3×L = 3×(1 + 5/12) yard = (3 + 15/12) yard

Writing this as a mixed number:

(3 + 12/12yard + 3/12yard) = (4 + 3/12) yard = (4 + 1/4) yard

Read more on mixed numbers:

https://brainly.com/question/29112400?referrer=searchResults

#SPJ4

Answer:

the answers it's 3x+4 siuuuuuuuuuuuuuyyyyy

Step-by-step explanation:

Kamla tablet in other developed its to the previous yield

A summary table of the given data set is given below.

You can compare typical study methodologies, conclusions, limits, etc. using a summary table. You can arrange the entries in any way you find convenient; for example, you might arrange your research according to timeliness or group entries with comparable study aims, models, or outcomes.

Only code:

d=read.csv(file.choose(),header = T) ### data file is selected after this command run

dataframe=as.data.frame(d) ### a) creating data frame

last_15=tail(data frame,15) # b) last 15 observation

last_15

str(d)

par(mfrow=c(2,2)) ## c) Plots

plot(d[,5],d[,2])

plot(d[,5],d[,3])

plot(d[,5],d[,4])

model=lm(d$sales~d$TV,data = d) # d) linear model

summary(model) ## summary of model

plot(model,color="red") ## plot model

code and output:

d=read.csv(file.choose(),header = T) ### data file is selected after this command run

dataframe=as.data.frame(d) ### a) creating data frame

last_15=tail(data frame,15) # b) last 15 observation

last_15

X                  TV       radio       newspaper       sales

186       205.0           45.1                 19.6             22.6

187       139.5             2.1                  26.6             10.3

188       191.1              28.7                18.2             17.3

189       286.0            13.9                3.7             15.9

190       18.7               12.1                 23.4             6.7

191       39.5               41.1                 5.8             10.8

192       75.5              10.8               6.0             9.9

193       17.2               4.1                 31.6             5.9

194       166.8            42.0              3.6             19.6

195       149.7            35.6              6.0             17.3

196       38.2              3.7                13.8             7.6

197       94.2              4.9               8.1             9.7

198       177.0            9.3               6.4             12.8

199       283.6           42.0            66.2             25.5

200       232.1           8.6               8.7            13.4

str(d)

'data. frame': 200 obs. of 5 variables:

X: int 1 2 3 4 5 6 7 8 9 10 ...

TV : num 230.1 44.5 17.2 151.5 180.8 ...

radio: num 37.8 39.3 45.9 41.3 10.8 48.9 32.8 19.6 2.1 2.6 ...

newspaper: num 69.2 45.1 69.3 58.5 58.4 75 23.5 11.6 1 21.2 ...

sales: num 22.1 10.4 9.3 18.5 12.9 7.2 11.8 13.2 4.8 10.6 ...

par(mfrow=c(2,2)) ## c) Plots

plot(d[,5],d[,2])

plot(d[,5],d[,3])

plot(d[,5],d[,4])

model=lm(d$sales~d$TV,data = d) # d) linear model

summary(model) ## summary of model

Call:

lm(formula = d$sales ~ d$TV, data = d)

Residuals:

Min 1Q Median 3Q Max

-8.3860 -1.9545 -0.1913 2.0671 7.2124

Coefficients:

Estimate Std. Error t value Pr(>|t|)

(Intercept) 7.032594 0.457843 15.36 <2e-16 ***

d$TV 0.047537 0.002691 17.67 <2e-16 ***

---

Sign in. codes: 0 ‘***’ 0.001 ‘**’ 0.01 ‘*’ 0.05 ‘.’ 0.1 ‘ ’ 1

Residual standard error: 3.259 on 198 degrees of freedom

Multiple R-squared: 0.6119, Adjusted R-squared: 0.6099

F-statistic: 312.1 on 1 and 198 DF, p-value: < 2.2e-16

plot(model,color="red") ## plot model

Learn more about summary tables here:

https://brainly.com/question/24280486

#SPJ4

At its intercept with even number of multiplicities, the graph of a polynomial function will have a smooth curve that passes through the intercept point. The curve will loop around the intercept point, increasing and then decreasing in a cyclic manner, before repeating the pattern.

At its intercept with even number of multiplicities, the graph of a polynomial function will have a smooth curve that passes through the intercept point. This is because the multiplicities of the intercept point are even, meaning that the graph will not have a hard turn or corner at the intercept point. Instead, the graph will loop around the intercept point, gradually increasing until it reaches a peak before gradually decreasing and eventually reaching the same point it started at. This cyclic pattern will repeat itself as the graph moves away from the intercept point. The even number of multiplicities means the graph will not have any sharp turns or corners, only a smooth curve that passes through the intercept point.

Learn more about polynomial here

https://brainly.com/question/11536910

#SPJ4

For the sample provided, The formula for standard deviation is slightly different than the population standard deviation. The answer is

[tex]\sqrt \frac{\sum (x-\bar x)^2}{n-1}[/tex] .

Sampling is the process of choosing a portion of a statistical population to estimate attributes of the entire population in statistics, quality control, and survey methods. Statisticians try to get samples that are typical of the population under consideration.

The standard deviation is a statistic that expresses how much variance or dispersion there is in a group of numbers. While a high standard deviation suggests that the values are dispersed throughout a wider range, a low standard deviation suggests that the values tend to be close to the established mean.

sample size = n

sample standard deviation (s) = [tex]\sqrt \frac{\sum (x-\bar x)^2}{n-1}[/tex]

To learn more about sampling visit:

https://brainly.com/question/14893265

#SPJ4

Answer:

Step-by-step explanation:

I reformatted the question to clarify the statements.  Please check for accuracy.

Given that D(x) = 2x, select all of the following that are true statements.

1.  D( x) is a direct variation.

2.  D( x) is a function.

3.  D( x) is a rule for the set of points (5, 10), (6, 12) and (-2, -4).

4.  x is the dependent variable.

5.  D(6) = 3

----------

1.  D( x) is a direct variation.   YES.  D(x) will always be 2 times x.

2.  D( x) is a function.   YES. Each calculated D(x) will have a unique point.

3.  D( x) is a rule for the set of points (5, 10), (6, 12) and (-2, -4).   YES.  Each (x,y) shows a value of y that is 2 times x, as per the equation's instructions.

4.  x is the dependent variable.   YES.  y depends on what value is chosen for x.

5.  D(6) = 3   NO.    d(6) = 2*(6) or 12  

The values of the input functions when put into the function are;

f(3) = 5

f(3²) = 9

f(-2) = 8/3

f(6) = 7

We are given the function to be represented as;

f(x) = ²/₃x + 3

Now, we are told that the input value of x are;

X = (3, 3², -2, 6)

Thus;

for f(3), we plug in the value of 3 into the function for x to get;

f(3) = ²/₃(3) + 3

f(3) = 2 + 3

f(3) = 5

for f(3²), we plug in the value of 3² into the function for x to get;

f(3²) = f(9) = ²/₃(9) + 3

f(3²) = 9

for f(-2), we plug in the value of -2 into the function for x to get;

f(-2) = ²/₃(-2) + 3

f(-2) = 8/3

for f(6), we plug in the value of -2 into the function for x to get;

f(6) = ²/₃(6) + 3

f(6) = 7

Read more about Function input values at; https://brainly.com/question/10283950

#SPJ1

It’s discriminant is zero, so it has one real solution statement is true for  x²-2x +1=0.

A quadratic equation is a second-order polynomial equation in a single variable x , ax²+bx+c=0. with a ≠ 0 .

The given quadratic equation is x²+1=2x

This can also be written as x²-2x +1=0

a=1, b=-2 and c=1

The expression b² − 4ac is called the discriminant, and can be used to determine whether the solutions are real, repeated, or complex.

(-2)² − 4(1)(1)=4-4

b² − 4ac= 0

A discriminant of zero indicates that the quadratic has a repeated real number solution.

It’s discriminant is zero, so it has one real solution.

Hence, It’s discriminant is zero, so it has one real solution statement is true for  x²-2x +1=0.

To learn more on Quadratic equation click:

https://brainly.com/question/17177510

#SPJ1

Yes, both the rates i.e. 24 laps in 6 minutes and 72 laps in 18 minutes are equivalent.

The unit rates for equivalent rates are the same. Similar to equivalent ratios, equivalent rates can be calculated by multiplying or dividing the numerator and denominator by the same amount.

When two expressions can be reduced to a single-third expression or when one of the expressions can be written in the same way as the other, they are said to be equivalent. When values are replaced for the variable and both expressions yield the same result, you may also tell if the two expressions are equal.

To determine whether the rates are equivalent, we need to compare the number of laps completed per unit of time. In the first case, the rate is 24 laps in 6 minutes, which is equal to 4 laps per minute. In the second case, the rate is 72 laps in 18 minutes, which is also equal to 4 laps per minute. Since both rates are equal to 4 laps per minute, the rates are equivalent.

To know more about equivalent rates visit :

https://brainly.com/question/14248389?referrer=searchResults

#SPJ4

The rates of 24 laps in 6 minutes and 72 laps in 18 minutes are equal, therefore yes.

Equivalent rates have the same unit rates. Equivalent rates can also be determined by multiplying or dividing the numerator and denominator by the same number, just like equivalent ratios.

Two expressions are considered to be equivalent if one of them can be written in the same way as the other or if they can both be condensed to a single-third expression. You may also tell if two expressions are equivalent if, when the values for the variable are changed, both expressions provide the same outcome.

In order to determine whether the rates are similar, we must compare the number of laps completed per unit of time. The pace in the first scenario is 4 laps per minute, or 24 laps done in 6 minutes. When 72 laps are completed in 18 minutes, the rate is similarly 4 laps per minute. Due to the fact that they both equal 4 laps per minute, their rates are equal.

Answer:

135 degree or 33/14 radian

Step-by-step explanation:

It is given that the arc HK= 33cm and the radius of the circle is 14cm

We can think of the angle subtended by arc HK as x

we know,

[tex] arc = \: radius \: \times angle(in \: radian)[/tex]

or

[tex]angle =\frac{arc}{radius} [/tex]

So,in the question above the arc HK= 33cm and the radius is 14cm

So, angle x is equal to,

[tex]x = \frac{33}{14} [/tex]

Thus,

the angle is,

[tex]angle \: = \frac{33}{14} radians[/tex]

and if u want to know the degree value we know,

[tex]1radian \: = \: \frac{180}{\pi} degree \:[/tex]

so,

[tex] \frac{33}{14} radian \: = \frac{33}{14} \times \frac{180}{\pi} degree[/tex]

[tex]which \: is \: = 135 \: degree[/tex]

mark as brainliest pls

Answer:

v = 6

w=13

Step-by-step explanation:

v = 6 because we know that both of the triangles are the same, they just rotate, but the measure is still the same.

To calculate w, we have the formula

2w + v + 11 = w - 3v +48

We already know v = 6, so put 6 in the v spot

2w + 6 + 11 = w -3(6) + 48

2w + 17 = w - 18 + 48

2w + 17 = w +30

Subtracted 17 from both sides

2w = w + 13

Subtract w from both sides

w= 13

Step-by-step explanation:

to add to the other correct answer :

the symbol means that both triangles are congruent.

and that means that when you turn then so that both can be laid on top of each other in the same direction, they would perfectly cover each other without any overlap whatsoever.

and that means that they must have the same angles and the same side lengths (and also other lengths like heights, bisectors, ...).

therefore,

v + 9 = 15

v = 6

and then

2w + v + 11 = w - 3v + 48

giving us w = 13

as the other answer already shows how.

and ED = QR, of course.

Answer:

Mohammed ibn-Musa al-Khowarizmi

The number of tickets purchased for a randomly chosen Olympic event. is the continuous random variable.

y is the number of tickets purchased for a randomly chosen Olympics event. is the random variable y discrete or continuous?

A random variable is a numerical quantity that is generated by a random experiment.

A random variable is called discrete if it has either a finite or a countable number of possible values. A random variable is called continuous if its possible values contain a whole interval of numbers.

A random variable is a number generated by a random experiment.

A random variable is called discrete if its possible values form a finite or countable set.

A random variable is called continuous if its possible values contain a whole interval of numbers.

In Olympics , number of event are there . that are not countable.

therefor, the number of tickets purchased for a randomly chosen Olympic event. is the continuous random variable.

To know more about random variable visit

#SPJ4

A random variable is a numerical quantity that is generated by a random experiment.

A random variable is called discrete if it has either a finite or a countable number of possible values. A random variable is called continuous if its possible values contain a whole interval of numbers.

A random variable is called continuous if its possible values contain a whole interval of numbers.

The number of tickets purchased for a randomly chosen Olympic event. is the continuous random variable.

Answer:

53/8, 6 17/25, 6.71, 6.713

Step-by-step explanation:

6.713, 6.71, 53/8, 6 17/25

53/8 = 6.625

6 17/25 = 167/25 = 6.68

So, the order from least to greatest is: 53/8, 6 17/25, 6.71, 6.713

Given the credit union banker's assets and liabilities, their total net worth is C. $233,693.

The difference between a person's long-term and short-term assets and obligations is that person's net worth (long-term and short-term).

The equity of a company, or the net assets possessed by the stockholders after all obligations have been settled, is comparable to the net value of the company.

Assets:

Car Value = $29,850

Savings Accounts = $12,409

Treasury Bonds = $10,000

Checking Account Balance = $19,419

Home Value = $194,450

Total assets = $266,128

Liabilities:

Car loan = $10,560

Student Loans = $13,824

Credit Card Balance = $8,051

Total liabilities = $32,435

Net worth = $233,693 ($266,128 - $32,435)

Thus, the banker's net worth is $233,693.

Complete question:

The assets and liabilities of a credit union banker are listed below.

What is the total net worth if the banker pays off the student loans?

A. $219,869

B. $247,517

C. $233,693

D. $252,304

(Refer to the image for the table)

To know more about net value visit: brainly.com/question/29985435

#SPJ4

Car Value = $29,850

Savings Accounts = $12,409

Treasury Bonds = $10,000

Checking Account Balance = $19,419

Home Value = $194,450

Total assets = $266,128

Liabilities:

Car loan = $10,560

Student Loans = $13,824

Credit Card Balance = $8,051

Total liabilities = $32,435

Net worth = $233,693 ($266,128 - $32,435)

Thus, the banker's net worth is $233,693.